Apply program name transformations also to remaining man page content.

The config files are unaffected; if you need to resolve a name conflict
for the config files, use --sysconfdir=/etc and --localstatedir=/var.

1 files changed, 0 insertions, 45 deletions

diff --git a/ax25rtd/ax25rtd.8 b/ax25rtd/ax25rtd.8
deleted file mode 100644
index 3646484..0000000
--- a/ax25rtd/ax25rtd.8
+++ /dev/null
@@ -1,45 +0,0 @@
-.TH AX25RTD 8 "11 November 2003" Linux "Linux Programmer's Manual"
-.SH NAME
-ax25rtd \- AX.25 routing daemon
-.SH SYNOPSIS
-.B ax25rtd
-.SH DESCRIPTION
-.LP
-.B ax25rtd
-is a daemon that:
-.LP
-- emulates the ceased "autorouter" of Linux Kernel AX.25
-.br
-- sets up ARP entries automagically
-.br
-- may adjust IP routes and encapsulation mode 
-  (although I really do not recomment to use this feature...)
-.LP
-The "autorouter" is not really an autorouter. It just listens to the AX.25
-traffic on your ports and uses this information to setup AX.25 routes. This
-can be turned on or off by altering the configuration file
-/etc/ax25/ax25rtd.conf.
-.LP
-Ax25rtd provides a socket /var/ax25/ax25rtd/control which is used for
-runtime maintainance through
-.B ax25rtctl 
-or to set up new routes by other
-daemons (a Flexnet router, perhaps?)
-.LP
-On startup ax25rtd reads the configuration file and afterwards preloads
-the caches from the files /var/ax25/ax25rtd/ax25_routes and
-/var/ax25/ax25rtd/ip_routes. On SIGTERM or 
-.B ax25rtctl --save 
-it saves the caches to those files.
-.SH FILES
-/etc/ax25/ax25rtd.conf
-.SH "SEE ALSO"
-.BR ax25rtd.conf (5),
-.BR ax25rtctl (8).
-.LP
-.SH AUTHORS
-.nf
-Joerg Reuter <jreuter@poboxes.com>
-.br
-Llaus Kudielka OE1KIB
-.fi