summaryrefslogtreecommitdiffstats
path: root/ax25ipd
diff options
context:
space:
mode:
Diffstat (limited to 'ax25ipd')
-rw-r--r--ax25ipd/COPYING.ax25ipd10
-rw-r--r--ax25ipd/HISTORY.ax25ipd4
-rw-r--r--ax25ipd/Makefile.am2
-rw-r--r--ax25ipd/README.ax25ipd42
-rw-r--r--ax25ipd/ax25ipd.conf2
-rw-r--r--ax25ipd/ax25ipd.h6
-rw-r--r--ax25ipd/bpqether.c6
-rw-r--r--ax25ipd/config.c2
-rw-r--r--ax25ipd/io.c2
-rw-r--r--ax25ipd/process.c4
10 files changed, 40 insertions, 40 deletions
diff --git a/ax25ipd/COPYING.ax25ipd b/ax25ipd/COPYING.ax25ipd
index af122c9..ae99518 100644
--- a/ax25ipd/COPYING.ax25ipd
+++ b/ax25ipd/COPYING.ax25ipd
@@ -17,16 +17,16 @@ And an extract from the original README file.
> Comments, Criticism, Enhancements, Problems, Bugs
> -------------------------------------------------
->
+>
> You can reach the person responsible for ax25ip at any of the following
> addresses:
->
+>
> Mike.Westerhof@Central.Sun.COM
->
+>
> KA9WSB@WB9YAE
->
+>
> Mike Westerhof, 17 N Main St, Mt Prospect, IL 60056
->
+>
> -------------------------------------------------------------------------
> Copyright 1991, Michael Westerhof, Sun Microsystems, Inc.
> This software may be freely used, distributed, or modified, providing
diff --git a/ax25ipd/HISTORY.ax25ipd b/ax25ipd/HISTORY.ax25ipd
index 20a6339..d336b40 100644
--- a/ax25ipd/HISTORY.ax25ipd
+++ b/ax25ipd/HISTORY.ax25ipd
@@ -38,8 +38,8 @@
* 1.0.1 various cleanups and changes ... now called ax25ipd
* added prototypes, fork's itself ... (vk5xxx)
*
- * 1.0.2 Incorporated patch allowing wildcarding of ax.25 callsigns.
- * The old method required a route for every call/ssid
+ * 1.0.2 Incorporated patch allowing wildcarding of ax.25 callsigns.
+ * The old method required a route for every call/ssid
* combination. (thanks to John Woolner. Wildcarding to be
* enhanced later ...
*
diff --git a/ax25ipd/Makefile.am b/ax25ipd/Makefile.am
index 1d20f98..6b06d8f 100644
--- a/ax25ipd/Makefile.am
+++ b/ax25ipd/Makefile.am
@@ -56,4 +56,4 @@ AX25_SYSCONFDIR=$(sysconfdir)/ax25
AX25_LOCALSTATEDIR=$(localstatedir)/ax25
INCLUDES = -DAX25_SYSCONFDIR=\""$(AX25_SYSCONFDIR)"\" \
- -DAX25_LOCALSTATEDIR=\""$(AX25_LOCALSTATEDIR)"\"
+ -DAX25_LOCALSTATEDIR=\""$(AX25_LOCALSTATEDIR)"\"
diff --git a/ax25ipd/README.ax25ipd b/ax25ipd/README.ax25ipd
index 0af2cce..bfc12d8 100644
--- a/ax25ipd/README.ax25ipd
+++ b/ax25ipd/README.ax25ipd
@@ -1,7 +1,7 @@
-**
+**
** This file is a cobbling together of the various notes on ax25ipd.
-**
+**
ax25ipd
=======
@@ -30,10 +30,10 @@ run on BSD should not present too many issues, there has been no attempt
to retain BSD(Sun) operability since it was updated in an environment
where there was no access to BSD.
- ax25ipd requires a serial port, and uses a raw socket to gain access
-to the IP layer of the host's TCP/IP implementation (this requires that
-ax25ipd be started by root). ax25ipd also supports using a standard UDP
-socket in place of the raw socket, although this does not adhere to
+ ax25ipd requires a serial port, and uses a raw socket to gain access
+to the IP layer of the host's TCP/IP implementation (this requires that
+ax25ipd be started by root). ax25ipd also supports using a standard UDP
+socket in place of the raw socket, although this does not adhere to
RFC1226.
@@ -96,7 +96,7 @@ myalias ILSUN
beacon every 540
btext ax25ipd -- digi ka9wsb-7 -- Experimental IP encapsulator
loglevel 2
-route W1AW-13 handbook.arrl.com
+route W1AW-13 handbook.arrl.com
route WZ9ZZZ last.one.edu
param 1 20
@@ -160,7 +160,7 @@ using ax25ipd to carry AX.25 traffic.
device /dev/ttya device /dev/ttya
speed 9600 speed 1200
route W1AW-5 fish.sea.com route KA9WSB-3 one.two.com
-
+
Using this setup, a user could run AX.25 connections between the two PCs.
Note that while NOS can digipeat, NOS will not automatically allow users
near W1AW-5 to digipeat through it to reach KA9WSB-3 (i.e. the command
@@ -203,7 +203,7 @@ Sample Configuration - digi-to-digi
device /dev/ttya device /dev/ttya
speed 9600 speed 9600
route W1AW-5 fish.sea.com route KA9WSB-3 one.two.com
- param 1 20 param 1 33
+ param 1 20 param 1 33
In this setup, the UNIX hosts are "on the air". No PCs or additional
hardware are required. A user near W1AW-5 could read a user near KA9WSB-3
@@ -214,9 +214,9 @@ would work just fine.
---------
We have added dual port capibility in DIGI MODE ONLY to allow us to use it
-with a Dataengine. Very little needed changing, but we did not document the
+with a Dataengine. Very little needed changing, but we did not document the
changes. If you really need to know, diff the package against the original,
-which was/is at sunsite.unc.edu. To specify the second port, do something
+which was/is at sunsite.unc.edu. To specify the second port, do something
like this...
#to use the second port, we need to be in digi mode
@@ -226,19 +226,19 @@ mode digi
mycall ve3djf-12
myalias vhfdjf
#
-#port 1 on my tnc goes to uhf.
-#The callsign and alias must be different for this to work right...
+#port 1 on my tnc goes to uhf.
+#The callsign and alias must be different for this to work right...
mycall2 ve3djf-13
myalias2 uhfdjf
#
-Everything else is the same. Note that if you leave out the mycall2 and
+Everything else is the same. Note that if you leave out the mycall2 and
myalias2 defines, it works just like the original in single port mode. For
recieving on the KISS (dual) port, packets are checked against both callsigns
-and aliases. Whoever is on the other end of the AXIP link can find out what
-port it came from by looking at the who it got digi'd through, although
-I can't think of any reason to do that... For transmiting, you go out the
-port with the callsign matching the digi address. For example, to go out
+and aliases. Whoever is on the other end of the AXIP link can find out what
+port it came from by looking at the who it got digi'd through, although
+I can't think of any reason to do that... For transmiting, you go out the
+port with the callsign matching the digi address. For example, to go out
port 0 in the above example, digi through ve3djf-12 or vhfdjf.
To go out port 1, digi through ve3djf-13 or uhfdjf.
@@ -246,11 +246,11 @@ Deficencies: If you specify the same callsign on both
ports, no error is generated, but the way the logic in the code works you
always go out the upper port (port 1), not port 0. In TNC mode, there is
really no way to specify which port to transmit on that I can think of, so
-there is no multiplexing there. Everything goes out port 0 in TNC mode
+there is no multiplexing there. Everything goes out port 0 in TNC mode
still. Lastly, none of the dump routines know anything about ports on the
KISS interface, so they look the same, with both ports lumped into one.
-Let us know if you like this hack, BTW. In retrospect, we should have
+Let us know if you like this hack, BTW. In retrospect, we should have
written a KISSPlexor (tm:-) HIHI. I think we will do that next.
@@ -260,7 +260,7 @@ VE3DJF@bbs.VE3RPI.ampr.org
AXIP (IP encapsulation of AX.25 frames) daemon by Michael Westerhof.
-
+
diff --git a/ax25ipd/ax25ipd.conf b/ax25ipd/ax25ipd.conf
index 1c7abf8..b3a59f0 100644
--- a/ax25ipd/ax25ipd.conf
+++ b/ax25ipd/ax25ipd.conf
@@ -52,7 +52,7 @@ mode tnc
# will automaticaly take effekt. With Unix98 pty's, the slave tty name
# could not be forseen. That's why ax25ipd will print the corresponding
# slave pty name as a separate line on stdout.
-#
+#
#device ampr
device /dev/ttyp0
#
diff --git a/ax25ipd/ax25ipd.h b/ax25ipd/ax25ipd.h
index b088247..d683154 100644
--- a/ax25ipd/ax25ipd.h
+++ b/ax25ipd/ax25ipd.h
@@ -3,11 +3,11 @@
* Copyright 1991, Michael Westerhof, Sun Microsystems, Inc.
* This software may be freely used, distributed, or modified, providing
* this header is not removed.
- *
+ *
*/
-/*
- * Modifications added for dual port kiss TNC
+/*
+ * Modifications added for dual port kiss TNC
* by Michael Durrant VE3PNX and D. Jeff Dionne Feb 4, 1995
*/
diff --git a/ax25ipd/bpqether.c b/ax25ipd/bpqether.c
index 1c2805b..ba675de 100644
--- a/ax25ipd/bpqether.c
+++ b/ax25ipd/bpqether.c
@@ -68,7 +68,7 @@ int send_bpq(unsigned char *buf, int l)
int offset = ETHERTAP_HEADER_LEN_MAX - ethertap_header_len;
static const unsigned char ethernet_header[18] = {
- 0x00, 0x00, 0x00, 0x02, /* ??? ??? ETH_P_AX25 (16bit) */
+ 0x00, 0x00, 0x00, 0x02, /* ??? ??? ETH_P_AX25 (16bit) */
0xfe, 0xfd, 0x00, 0x00, 0x00, 0x00, /* Destination address (kernel et
hertap module) */
0xfe, 0xfe, 0x00, 0x00, 0x00, 0x00, /* Source address (WAMPES etherta
@@ -161,7 +161,7 @@ static int tun_alloc(char *dev)
#endif
return fd;
-}
+}
#endif
/*---------------------------------------------------------------------------*/
@@ -176,7 +176,7 @@ int open_ethertap(char *ifname)
int tuntap = 0;
int mtu = 0;
int skfd;
-
+
strcpy(devname, "/dev/");
strncpy(devname + 5, ifname, sizeof(devname) - 5 -1);
devname[sizeof(devname) -1] = 0;
diff --git a/ax25ipd/config.c b/ax25ipd/config.c
index 8d9405b..5b2c3e4 100644
--- a/ax25ipd/config.c
+++ b/ax25ipd/config.c
@@ -328,7 +328,7 @@ int parse_line(char *buf)
* strange 10093. Even more, ax25ipd.conf's
* examples for axip did not help - and the
* manual is far from complete.
- */
+ */
if (uport == 0)
uport = DEFAULT_UDP_PORT;
q = strtok(NULL, " \t\n\r");
diff --git a/ax25ipd/io.c b/ax25ipd/io.c
index a293d69..6d5fcd5 100644
--- a/ax25ipd/io.c
+++ b/ax25ipd/io.c
@@ -204,7 +204,7 @@ void io_open(void)
perror("setting non-blocking I/O on tty device");
exit(1);
}
-
+
if (i_am_unix98_pty_master) {
/* get name of pts-device */
if ((namepts = ptsname(ttyfd)) == NULL) {
diff --git a/ax25ipd/process.c b/ax25ipd/process.c
index 9508f0e..5717cd1 100644
--- a/ax25ipd/process.c
+++ b/ax25ipd/process.c
@@ -48,7 +48,7 @@ void process_init(void)
* not include the CRC bytes. These are computed by this routine, and
* it is expected that the buffer we have has room for the CRC bytes.
* We will either dump this frame, or send it via the IP interface.
- *
+ *
* If we are in digi mode, we validate in several ways:
* a) we must be the next digi in line to pick up the packet
* b) the next site to get the packet (the next listed digi, or
@@ -135,7 +135,7 @@ void from_kiss(unsigned char *buf, int l)
* a pointer to an AX25 frame.
* Note that the frame includes the CRC bytes, which we dump ASAP.
* We will either dump this frame, or send it via the KISS interface.
- *
+ *
* If we are in digi mode, we only validate that:
* a) we must be the next digi in line to pick up the packet
* If we pass validation, we then set the digipeated bit for our entry
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-16 04:11:23 +0000