From 0fceb64d25ff3d9586549bb43d971c5eef904330 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Mon, 7 Jun 1999 10:23:42 +0200 Subject: Import ax25-apps 0.0.1 from tarball --- ax25ipd/ax25ipd.conf.5 | 159 +++++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 159 insertions(+) create mode 100644 ax25ipd/ax25ipd.conf.5 (limited to 'ax25ipd/ax25ipd.conf.5') diff --git a/ax25ipd/ax25ipd.conf.5 b/ax25ipd/ax25ipd.conf.5 new file mode 100644 index 0000000..73ea569 --- /dev/null +++ b/ax25ipd/ax25ipd.conf.5 @@ -0,0 +1,159 @@ +.TH AX25IPD.CONF 5 "7 July 1997" Linux "Linux Programmer's Manual" +.SH NAME +ax25ipd.conf \- Control the operation of ax25ipd. +.SH DESCRIPTION +.LP +The +.B ax25ipd.conf +file controls the operation of the ax25ipd(8) program. The operation of the +config file can best be seen in an example: +.LP +# +.br +# ax25ipd configuration file for station floyd.vk5xxx.ampr.org +.br +# +.br +# Select axip transport. 'ip' is what you want for compatibility +.br +# with most other gates ... +.br +# +.br +socket ip +.br +# +.br +# Set ax25ipd mode of operation. (digi or tnc) +.br +# +.br +mode tnc +.br +# +.br +# If you selected digi, you must define a callsign. If you selected +.br +# tnc mode, the callsign is currently optional, but this may change +.br +# in the future! (2 calls if using dual port kiss) +.br +# +.br +# mycall vk5xxx-4 +.br +# mycall2 vk5xxx-5 +.br +# +.br +# In digi mode, you may use an alias. (2 for dual port) +.br +# +.br +# myalias svwdns +.br +# myalias2 svwdn2 +.br +# +.br +# Send an ident every 540 seconds ... +.br +# +.br +# beacon after 540 +.br +# btext ax25ip -- tncmode rob/vk5xxx -- Experimental AXIP gateway +.br +# +.br +# Serial port, or pipe connected to a kissattach in my case +.br +# +.br +device /dev/ttyp0 +.br +# +.br +# Set the device speed +.br +# +.br +speed 9600 +.br +# +.br +# loglevel 0 - no output +.br +# loglevel 1 - config info only +.br +# loglevel 2 - major events and errors +.br +# loglevel 3 - major events, errors, and AX25 frame trace +.br +# loglevel 4 - all events +.br +# log 0 for the moment, syslog not working yet ... +.br +# +.br +loglevel 4 +.br +# +.br +# If we are in digi mode, we might have a real tnc here, so use param to +.br +# set the tnc parameters ... +.br +# +.br +# param 1 20 +.br +# +.br +# Broadcast Address definition. Any of the addresses listed will be forwarded +.br +# to any of the routes flagged as broadcast capable routes. +.br +# +.br +broadcast QST-0 NODES-0 +.br +# +.br +# ax.25 route definition, define as many as you need. +.br +# format is route (call/wildcard) (ip host at destination) +.br +# ssid of 0 routes all ssid's +.br +# +.br +# route [flags] +.br +# +.br +# Valid flags are: +.br +# b - allow broadcasts to be transmitted via this route +.br +# d - this route is the default route +.br +# +.br +route vk2sut-0 44.136.8.68 b +.br +route vk5asf 44.136.188.221 b +.br +route vk2abc 44.1.1.1 d +.br +# +.br +# +.br +.LP +More to come ... +.SH FILES +.LP +/etc/ax25/ax25ipd.conf +.SH "SEE ALSO" +.BR ax25ipd (8). -- cgit v1.2.3