Import ax25-tools 0.0.1 from tarballax25-tools-0.0.1

1 files changed, 118 insertions, 0 deletions

diff --git a/hdlcutil/usersmdiag.h b/hdlcutil/usersmdiag.h
new file mode 100644
index 0000000..5335002
--- /dev/null
+++ b/hdlcutil/usersmdiag.h
@@ -0,0 +1,118 @@
+/*****************************************************************************/
+
+/*
+ *      usersmdiag.h  --  Diagnostics interface.
+ *
+ *      Copyright (C) 1996  Thomas Sailer (sailer@ife.ee.ethz.ch)
+ *        Swiss Federal Institute of Technology (ETH), Electronics Lab
+ *
+ *      This program is free software; you can redistribute it and/or modify
+ *      it under the terms of the GNU General Public License as published by
+ *      the Free Software Foundation; either version 2 of the License, or
+ *      (at your option) any later version.
+ *
+ *      This program is distributed in the hope that it will be useful,
+ *      but WITHOUT ANY WARRANTY; without even the implied warranty of
+ *      MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ *      GNU General Public License for more details.
+ *
+ *      You should have received a copy of the GNU General Public License
+ *      along with this program; if not, write to the Free Software
+ *      Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ *
+ *  This is the Linux realtime sound output driver
+ */
+
+/*****************************************************************************/
+      
+#ifndef _USERSMDIAG_H
+#define _USERSMDIAG_H
+
+/* --------------------------------------------------------------------- */
+
+#define USERSM_KEY_PROJ                '0'
+
+/* --------------------------------------------------------------------- */
+
+#define USERSM_CMD_REQ_CHACCESS_PAR    0x00020
+#define USERSM_CMD_ACK_CHACCESS_PAR    0x10021
+#define USERSM_CMD_SET_CHACCESS_PAR    0x00022
+
+#define USERSM_CMD_CALIBRATE           0x00030
+#define USERSM_CMD_REQ_CHANNELSTATE    0x00031
+#define USERSM_CMD_ACK_CHANNELSTATE    0x10032
+
+#define USERSM_CMD_REQ_DIAG            0x00040
+#define USERSM_CMD_ACK_DIAG            0x10041
+
+#define USERSM_CMD_REQ_DRVNAME         0x00050
+#define USERSM_CMD_ACK_DRVNAME         0x10051
+#define USERSM_CMD_REQ_DRVMODE         0x00052
+#define USERSM_CMD_ACK_DRVMODE         0x10053
+
+/*
+ * diagnose modes; same as in <linux/soundmodem.h>
+ */
+#define USERSM_DIAGMODE_OFF            0
+#define USERSM_DIAGMODE_INPUT          1
+#define USERSM_DIAGMODE_DEMOD          2
+#define USERSM_DIAGMODE_CONSTELLATION  3
+
+/*
+ * diagnose flags; same as in <linux/soundmodem.h>
+ */
+#define USERSM_DIAGFLAG_DCDGATE    (1<<0)
+#define USERSM_DIAGFLAG_VALID      (1<<1)
+
+/* --------------------------------------------------------------------- */
+
+#define DIAGDATALEN 64
+
+/* --------------------------------------------------------------------- */
+
+struct usersmmsg {
+	struct usersm_hdr {
+		long type;
+		unsigned int channel;
+	} hdr;
+	union {
+		struct usersm_chaccess_par {
+			int tx_delay;  /* the transmitter keyup delay in 10ms units */
+			int tx_tail;   /* the transmitter keyoff delay in 10ms units */
+			int slottime;  /* the slottime in 10ms; usually 10 = 100ms */
+			int ppersist;  /* the p-persistence 0..255 */
+			int fulldup;   /* some driver do not support full duplex, setting */
+			/* this just makes them send even if DCD is on */
+		} cp;
+		
+		int calib;
+
+		struct usersm_channel_state {
+			int ptt;
+			int dcd;
+			int ptt_keyed;
+			unsigned long tx_packets;
+			unsigned long tx_errors;
+			unsigned long rx_packets;
+			unsigned long rx_errors;
+		} cs;
+		
+		struct usersm_diag {
+			unsigned int mode;
+			unsigned int flags;
+			unsigned int samplesperbit;
+			unsigned int datalen;
+		} diag;
+
+		struct usersm_diag_out {
+			struct usersm_diag diag;
+			short samples[DIAGDATALEN];
+		} diag_out;
+
+		unsigned char by[0];
+	} data;
+};
+
+/* --------------------------------------------------------------------- */
+#endif /* _USERSMDIAG_H */