diff options
| -rw-r--r-- | ChangeLog | 6 | ||||
| -rw-r--r-- | ax25io.c | 235 | ||||
| -rw-r--r-- | ax25io.h | 12 | ||||
| -rwxr-xr-x | config.guess | 415 | ||||
| -rwxr-xr-x | config.sub | 249 | ||||
| -rw-r--r-- | ltmain.sh | 1382 |
6 files changed, 974 insertions, 1325 deletions
@@ -1,3 +1,9 @@ +libax25 0.0.11 + * libax25io handles nonblocking io correctly. (PE1RXQ) + THIS BREAKS PRACTICLY EVERY APP USING THIS LIBRARY, FIX THEM!!! + + -- Craig Small <csmall@small.dropbear.id.au> Fri, 21 Feb 2003 21:33:48 +1100 + libax25 0.0.10 * Fixed byte counting in flush_obuf() (PE1RXQ) @@ -9,6 +9,10 @@ #include "config.h" #include "ax25io.h" +static inline int send_iac_iac(ax25io *p); +static inline int send_iac_cmd(ax25io *p, char cmd, char opt); +static inline int send_linemode(ax25io *p); + static ax25io *Iolist = NULL; /* --------------------------------------------------------------------- */ @@ -17,10 +21,10 @@ static ax25io *Iolist = NULL; #include <zlib.h> struct compr_s { - int z_error; /* "(de)compression error" flag */ - unsigned char char_buf; /* temporary character buffer */ - z_stream zin; /* decompressor structure */ - z_stream zout; /* compressor structure */ + int z_error; /* "(de)compression error" flag */ + unsigned char char_buf; /* temporary character buffer */ + z_stream zin; /* decompressor structure */ + z_stream zout; /* compressor structure */ }; #endif @@ -33,10 +37,14 @@ ax25io *axio_init(int in, int out, int paclen, char *eol) if ((new = calloc(1, sizeof(ax25io))) == NULL) return NULL; - new->ifd = in; - new->ofd = out; - new->eolmode = EOLMODE_TEXT; - new->paclen = paclen; + if (paclen > AXBUFLEN) + paclen = AXBUFLEN; + + new->ifd = in; + new->ofd = out; + new->eolmode = EOLMODE_TEXT; + new->paclen = paclen; + new->gbuf_usage = 0; strncpy(new->eol, eol, 3); new->eol[3] = 0; @@ -94,7 +102,7 @@ int axio_compr(ax25io *p, int flag) } return 0; #endif - /*ax25_errno = AX25IO_NO_Z_SUPPORT;*/ + /* ax25_errno = AX25IO_NO_Z_SUPPORT; */ return -1; } @@ -133,39 +141,28 @@ int axio_tnmode(ax25io *p, int newmode) static int flush_obuf(ax25io *p) { - int ret; - int count=0; + int ret, len; if (p->optr == 0) return 0; - do { - if ((ret = write(p->ofd, p->obuf, p->optr < p->paclen ? p->optr : p->paclen)) < 0) - return -1; + len = p->optr < p->paclen ? p->optr : p->paclen; - if (ret < p->optr) - memmove(p->obuf, &p->obuf[ret], p->optr - ret); - p->optr -= ret; - count += ret; + if ((ret = write(p->ofd, p->obuf, len)) < 0) + return -1; - /* If buffer full block until there is room */ - if (p->optr>=AXBUFLEN) { - fd_set fdset; + if (ret && ret < p->optr) + memmove(p->obuf, &p->obuf[ret], p->optr - ret); - FD_ZERO(&fdset); - FD_SET(p->ofd, &fdset); - if (select(p->ofd+1, NULL, &fdset, NULL, NULL)<0) - return -1; - } - } while (p->optr>=AXBUFLEN); + p->optr -= ret; - return count; + return ret; } int axio_flush(ax25io *p) { - int flushed=0; - fd_set fdset; + int flushed = 0; + int ret; #ifdef HAVE_ZLIB_H if (p->zptr) { @@ -227,18 +224,23 @@ int axio_flush(ax25io *p) #endif while (p->optr) { - FD_ZERO(&fdset); - FD_SET(p->ofd, &fdset); - if (select(p->ofd+1, NULL, &fdset, NULL, NULL)<0) + /* Return on error or if zero bytes written */ + if ((ret = flush_obuf(p)) <= 0) return -1; - flushed+=flush_obuf(p); + flushed += ret; } return flushed; } -static int rsendchar(unsigned char c, ax25io *p) +static int rsend(unsigned char *c, int len, ax25io *p) { + /* Don't go further until there is space */ + if (p->paclen <= p->optr) { + if (flush_obuf(p) <= 0) + return -1; + } + #ifdef HAVE_ZLIB_H if (p->zptr) { struct compr_s *z = (struct compr_s *) p->zptr; @@ -255,9 +257,8 @@ static int rsendchar(unsigned char c, ax25io *p) /* * One new character to input. */ - z->char_buf = c; - z->zout.next_in = &z->char_buf; - z->zout.avail_in = 1; + z->zout.next_in = c; + z->zout.avail_in = len; /* * Now loop until deflate returns with avail_out != 0 */ @@ -298,18 +299,25 @@ static int rsendchar(unsigned char c, ax25io *p) } while (z->zout.avail_out == 0); - return c; + return len; } #endif - p->obuf[p->optr++] = c; + if (p->optr + len < AXBUFLEN) { + memcpy(p->obuf + p->optr, c, len); + p->optr += len; + } else { + errno = EAGAIN; + return -1; + } if (p->optr >= p->paclen && flush_obuf(p) < 0) return -1; - return c; + return len; } + /* --------------------------------------------------------------------- */ static int recv_ibuf(ax25io *p) @@ -423,32 +431,23 @@ static int rrecvchar(ax25io *p) int axio_putc(int c, ax25io *p) { - char *cp; + char cp; - if (p->telnetmode && c == IAC) { - if (rsendchar(IAC, p) == -1) - return -1; - return rsendchar(IAC, p); - } + if (p->telnetmode && c == IAC) + return send_iac_iac(p); if (c == INTERNAL_EOL) { if (p->eolmode == EOLMODE_BINARY) - return rsendchar('\n', p); + return rsend("\n", 1, p); else - for (cp = p->eol; *cp; cp++) - if (rsendchar(*cp, p) == -1) - return -1; - return 1; + return rsend(p->eol, strlen(p->eol), p); } - if (p->eolmode == EOLMODE_TEXT && c == '\n') { - for (cp = p->eol; *cp; cp++) - if (rsendchar(*cp, p) == -1) - return -1; - return 1; - } + if (p->eolmode == EOLMODE_TEXT && c == '\n') + return rsend(p->eol, strlen(p->eol), p); - return rsendchar(c & 0xff, p); + cp = c & 0xff; + return rsend(&cp, 1, p); } int axio_getc(ax25io *p) @@ -456,7 +455,7 @@ int axio_getc(ax25io *p) int c, opt; char *cp; - opt = 0; /* silence warning */ + opt = 0; /* silence warning */ if ((c = rrecvchar(p)) == -1) return -1; @@ -468,7 +467,7 @@ int axio_getc(ax25io *p) if (c > 249 && c < 255 && (opt = rrecvchar(p)) == -1) return -1; - switch(c) { + switch (c) { case IP: case ABORT: case xEOF: @@ -500,26 +499,19 @@ int axio_getc(ax25io *p) * ECHO and TRAPSIG). */ if (opt == TELOPT_LINEMODE && p->tn_linemode) { - rsendchar(IAC, p); - rsendchar(SB, p); - rsendchar(TELOPT_LINEMODE, p); - rsendchar(LM_MODE, p); - rsendchar(MODE_EDIT | MODE_TRAPSIG, p); - rsendchar(IAC, p); - rsendchar(SE, p); + if (send_linemode(p) < 0) + return -1; } else { - rsendchar(IAC, p); - rsendchar(DONT, p); - rsendchar(opt, p); + if (send_iac_cmd(p, DONT, opt) < 0) + return -1; } axio_flush(p); break; case DO: switch (opt) { case TELOPT_SGA: - rsendchar(IAC, p); - rsendchar(WILL, p); - rsendchar(opt, p); + if (send_iac_cmd(p, WILL, opt) < 0) + return -1; axio_flush(p); break; case TELOPT_ECHO: @@ -531,9 +523,8 @@ int axio_getc(ax25io *p) break; /* Note fall-through */ default: - rsendchar(IAC, p); - rsendchar(WONT, p); - rsendchar(opt, p); + if (send_iac_cmd(p, WONT, opt) < 0) + return -1; axio_flush(p); break; } @@ -574,43 +565,55 @@ int axio_getc(ax25io *p) /* --------------------------------------------------------------------- */ -char *axio_gets(char *buf, int buflen, ax25io *p) +int axio_gets(char *buf, int buflen, ax25io *p) { int c, len = 0; while (len < (buflen - 1)) { c = axio_getc(p); if (c == -1) { - if (len > 0) { - buf[len] = 0; - return buf; - } else - return NULL; + return -len; } /* NUL also interpreted as EOL */ if (c == '\n' || c == '\r' || c == 0) { buf[len] = 0; - return buf; + errno = 0; + return len; } buf[len++] = c; } buf[buflen - 1] = 0; - return buf; + errno = 0; + return len; } char *axio_getline(ax25io *p) { - static char buf[AXBUFLEN]; + int ret; - return axio_gets(buf, AXBUFLEN, p); + ret = axio_gets(p->gbuf + p->gbuf_usage, AXBUFLEN - p->gbuf_usage, p); + if (ret > 0 || (ret == 0 && errno == 0)) { + p->gbuf_usage = 0; + return p->gbuf; + } + p->gbuf_usage += ret; + return NULL; } int axio_puts(const char *s, ax25io *p) { + int count=0; + while (*s) - if (axio_putc(*s++, p) == -1) - return -1; - return 0; + if (axio_putc(*s++, p) == -1) { + if (errno != EAGAIN) + return -1; + else + break; + } else { + count++; + } + return count; } /* --------------------------------------------------------------------- */ @@ -640,29 +643,57 @@ int axio_printf(ax25io *p, const char *fmt, ...) /* --------------------------------------------------------------------- */ -void axio_tn_do_linemode(ax25io *p) +int axio_tn_do_linemode(ax25io *p) { - rsendchar(IAC, p); - rsendchar(DO, p); - rsendchar(TELOPT_LINEMODE, p); + if (send_iac_cmd(p, DO, TELOPT_LINEMODE) < 0) + return -1; p->tn_linemode = 1; + return 0; } -void axio_tn_will_echo(ax25io *p) +int axio_tn_will_echo(ax25io *p) { - rsendchar(IAC, p); - rsendchar(WILL, p); - rsendchar(TELOPT_ECHO, p); + if (send_iac_cmd(p, WILL, TELOPT_ECHO) < 0) + return -1; p->tn_echo = 1; + return 0; } -void axio_tn_wont_echo(ax25io *p) +int axio_tn_wont_echo(ax25io *p) { - rsendchar(IAC, p); - rsendchar(WONT, p); - rsendchar(TELOPT_ECHO, p); + if (send_iac_cmd(p, WONT, TELOPT_ECHO) < 0) + return -1; p->tn_echo = 0; + return 0; } /* --------------------------------------------------------------------- */ +static inline int send_iac_iac(ax25io *p) +{ + char buf[2] = { IAC, IAC }; + + return rsend(buf, 2, p); +} + +static inline int send_iac_cmd(ax25io *p, char cmd, char opt) +{ + char buf[3]; + + buf[0] = IAC; + buf[1] = cmd; + buf[2] = opt; + + return rsend(buf, 3, p); +} + +static inline int send_linemode(ax25io *p) +{ + char buf[7] = { IAC, SB, TELOPT_LINEMODE, LM_MODE, MODE_EDIT | MODE_TRAPSIG, IAC, SE }; + + return rsend(buf, 7, p); +} + +/* --------------------------------------------------------------------- */ + + @@ -33,6 +33,8 @@ typedef struct ax25io_s { int paclen; /* paclen */ unsigned char ibuf[AXBUFLEN]; /* input buffer */ unsigned char obuf[AXBUFLEN]; /* output buffer */ + unsigned char gbuf[AXBUFLEN]; /* getline buffer */ + int gbuf_usage; /* getline buffer usage */ int iptr; /* input pointer */ int optr; /* output pointer */ void *zptr; /* pointer to the compression struct */ @@ -73,13 +75,13 @@ extern int axio_getc(ax25io *); extern int axio_putc(int, ax25io *); extern char *axio_getline(ax25io *); -extern char *axio_gets(char *, int, ax25io *); +extern int axio_gets(char *, int, ax25io *); extern int axio_puts(const char *, ax25io *); extern int axio_printf(ax25io *, const char *, ...); -extern void axio_tn_do_linemode(ax25io *); -extern void axio_tn_will_echo(ax25io *); -extern void axio_tn_wont_echo(ax25io *); +extern int axio_tn_do_linemode(ax25io *); +extern int axio_tn_will_echo(ax25io *); +extern int axio_tn_wont_echo(ax25io *); -#endif _AX25IO_H +#endif /* _AX25IO_H */ diff --git a/config.guess b/config.guess index 89f122d..ed2e03b 100755 --- a/config.guess +++ b/config.guess @@ -1,9 +1,9 @@ #! /bin/sh # Attempt to guess a canonical system name. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. -timestamp='2001-06-01' +timestamp='2002-03-20' # This file is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by @@ -24,8 +24,9 @@ timestamp='2001-06-01' # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -# Written by Per Bothner <bothner@cygnus.com>. -# Please send patches to <config-patches@gnu.org>. +# Originally written by Per Bothner <per@bothner.com>. +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. # # This script attempts to guess a canonical system name similar to # config.sub. If it succeeds, it prints the system name on stdout, and @@ -52,7 +53,7 @@ version="\ GNU config.guess ($timestamp) Originally written by Per Bothner. -Copyright (C) 1992, 93, 94, 95, 96, 97, 98, 99, 2000 +Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 Free Software Foundation, Inc. This is free software; see the source for copying conditions. There is NO @@ -95,25 +96,25 @@ trap 'rm -f $dummy.c $dummy.o $dummy.rel $dummy; exit 1' 1 2 15 # Historically, `CC_FOR_BUILD' used to be named `HOST_CC'. We still # use `HOST_CC' if defined, but it is deprecated. -case $CC_FOR_BUILD,$HOST_CC,$CC in - ,,) echo "int dummy(){}" > $dummy.c - for c in cc gcc c89 ; do - ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 +set_cc_for_build='case $CC_FOR_BUILD,$HOST_CC,$CC in + ,,) echo "int dummy(){}" > $dummy.c ; + for c in cc gcc c89 c99 ; do + ($c $dummy.c -c -o $dummy.o) >/dev/null 2>&1 ; if test $? = 0 ; then - CC_FOR_BUILD="$c"; break - fi - done - rm -f $dummy.c $dummy.o $dummy.rel + CC_FOR_BUILD="$c"; break ; + fi ; + done ; + rm -f $dummy.c $dummy.o $dummy.rel ; if test x"$CC_FOR_BUILD" = x ; then - CC_FOR_BUILD=no_compiler_found + CC_FOR_BUILD=no_compiler_found ; fi ;; ,,*) CC_FOR_BUILD=$CC ;; ,*,*) CC_FOR_BUILD=$HOST_CC ;; -esac +esac' # This is needed to find uname on a Pyramid OSx when run in the BSD universe. -# (ghazi@noc.rutgers.edu 8/24/94.) +# (ghazi@noc.rutgers.edu 1994-08-24) if (test -f /.attbin/uname) >/dev/null 2>&1 ; then PATH=$PATH:/.attbin ; export PATH fi @@ -127,29 +128,30 @@ UNAME_VERSION=`(uname -v) 2>/dev/null` || UNAME_VERSION=unknown case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in *:NetBSD:*:*) - # Netbsd (nbsd) targets should (where applicable) match one or + # NetBSD (nbsd) targets should (where applicable) match one or # more of the tupples: *-*-netbsdelf*, *-*-netbsdaout*, # *-*-netbsdecoff* and *-*-netbsd*. For targets that recently # switched to ELF, *-*-netbsd* would select the old # object file format. This provides both forward # compatibility and a consistent mechanism for selecting the # object file format. - # Determine the machine/vendor (is the vendor relevant). - case "${UNAME_MACHINE}" in - amiga) machine=m68k-unknown ;; - arm32) machine=arm-unknown ;; - atari*) machine=m68k-atari ;; - sun3*) machine=m68k-sun ;; - mac68k) machine=m68k-apple ;; - macppc) machine=powerpc-apple ;; - hp3[0-9][05]) machine=m68k-hp ;; - ibmrt|romp-ibm) machine=romp-ibm ;; - *) machine=${UNAME_MACHINE}-unknown ;; + # + # Note: NetBSD doesn't particularly care about the vendor + # portion of the name. We always set it to "unknown". + sysctl="sysctl -n hw.machine_arch" + UNAME_MACHINE_ARCH=`(/sbin/$sysctl 2>/dev/null || \ + /usr/sbin/$sysctl 2>/dev/null || echo unknown)` + case "${UNAME_MACHINE_ARCH}" in + arm*) machine=arm-unknown ;; + sh3el) machine=shl-unknown ;; + sh3eb) machine=sh-unknown ;; + *) machine=${UNAME_MACHINE_ARCH}-unknown ;; esac # The Operating System including object format, if it has switched # to ELF recently, or will in the future. - case "${UNAME_MACHINE}" in - i386|sparc|amiga|arm*|hp300|mvme68k|vax|atari|luna68k|mac68k|news68k|next68k|pc532|sun3*|x68k) + case "${UNAME_MACHINE_ARCH}" in + arm*|i386|m68k|ns32k|sh3*|sparc|vax) + eval $set_cc_for_build if echo __ELF__ | $CC_FOR_BUILD -E - 2>/dev/null \ | grep __ELF__ >/dev/null then @@ -171,6 +173,45 @@ case "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" in # CPU_TYPE-MANUFACTURER-OPERATING_SYSTEM is used. echo "${machine}-${os}${release}" exit 0 ;; + amiga:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + arc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + hp300:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mac68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + macppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme68k:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvme88k:OpenBSD:*:*) + echo m88k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + mvmeppc:OpenBSD:*:*) + echo powerpc-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + pmax:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sgi:OpenBSD:*:*) + echo mipseb-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + sun3:OpenBSD:*:*) + echo m68k-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + wgrisc:OpenBSD:*:*) + echo mipsel-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; + *:OpenBSD:*:*) + echo ${UNAME_MACHINE}-unknown-openbsd${UNAME_RELEASE} + exit 0 ;; alpha:OSF1:*:*) if test $UNAME_RELEASE = "V4.0"; then UNAME_RELEASE=`/usr/sbin/sizer -v | awk '{print $3}'` @@ -204,6 +245,7 @@ main: jsr \$26,exit .end main EOF + eval $set_cc_for_build $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null if test "$?" = 0 ; then case `./$dummy` in @@ -225,6 +267,9 @@ EOF 2-307) UNAME_MACHINE="alphaev67" ;; + 2-1307) + UNAME_MACHINE="alphaev68" + ;; esac fi rm -f $dummy.s $dummy @@ -242,29 +287,11 @@ EOF Amiga*:UNIX_System_V:4.0:*) echo m68k-unknown-sysv4 exit 0;; - amiga:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; *:[Aa]miga[Oo][Ss]:*:*) echo ${UNAME_MACHINE}-unknown-amigaos exit 0 ;; - arc64:OpenBSD:*:*) - echo mips64el-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - arc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - hkmips:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - pmax:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - sgi:OpenBSD:*:*) - echo mips-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - wgrisc:OpenBSD:*:*) - echo mipsel-unknown-openbsd${UNAME_RELEASE} + *:[Mm]orph[Oo][Ss]:*:*) + echo ${UNAME_MACHINE}-unknown-morphos exit 0 ;; *:OS/390:*:*) echo i370-ibm-openedition @@ -314,7 +341,7 @@ EOF echo m68k-sun-sunos${UNAME_RELEASE} exit 0 ;; sun*:*:4.2BSD:*) - UNAME_RELEASE=`(head -1 /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` + UNAME_RELEASE=`(sed 1q /etc/motd | awk '{print substr($5,1,3)}') 2>/dev/null` test "x${UNAME_RELEASE}" = "x" && UNAME_RELEASE=3 case "`/bin/arch`" in sun3) @@ -328,9 +355,6 @@ EOF aushp:SunOS:*:*) echo sparc-auspex-sunos${UNAME_RELEASE} exit 0 ;; - atari*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; # The situation for MiNT is a little confusing. The machine name # can be virtually everything (everything which is not # "atarist" or "atariste" at least should have a processor @@ -357,18 +381,6 @@ EOF *:*MiNT:*:* | *:*mint:*:* | *:*TOS:*:*) echo m68k-unknown-mint${UNAME_RELEASE} exit 0 ;; - sun3*:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mac68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme68k:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; - mvme88k:OpenBSD:*:*) - echo m88k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; powerpc:machten:*:*) echo powerpc-apple-machten${UNAME_RELEASE} exit 0 ;; @@ -385,6 +397,7 @@ EOF echo clipper-intergraph-clix${UNAME_RELEASE} exit 0 ;; mips:*:*:UMIPS | mips:*:*:RISCos) + eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #ifdef __cplusplus #include <stdio.h> /* for printf() prototype */ @@ -475,6 +488,7 @@ EOF exit 0 ;; *:AIX:2:3) if grep bos325 /usr/include/stdio.h >/dev/null 2>&1; then + eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include <sys/systemcfg.h> @@ -496,7 +510,7 @@ EOF fi exit 0 ;; *:AIX:*:[45]) - IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | head -1 | awk '{ print $1 }'` + IBM_CPU_ID=`/usr/sbin/lsdev -C -c processor -S available | sed 1q | awk '{ print $1 }'` if /usr/sbin/lsattr -El ${IBM_CPU_ID} | grep ' POWER' >/dev/null 2>&1; then IBM_ARCH=rs6000 else @@ -536,10 +550,8 @@ EOF 9000/31? ) HP_ARCH=m68000 ;; 9000/[34]?? ) HP_ARCH=m68k ;; 9000/[678][0-9][0-9]) - case "${HPUX_REV}" in - 11.[0-9][0-9]) - if [ -x /usr/bin/getconf ]; then - sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` + if [ -x /usr/bin/getconf ]; then + sc_cpu_version=`/usr/bin/getconf SC_CPU_VERSION 2>/dev/null` sc_kernel_bits=`/usr/bin/getconf SC_KERNEL_BITS 2>/dev/null` case "${sc_cpu_version}" in 523) HP_ARCH="hppa1.0" ;; # CPU_PA_RISC1_0 @@ -548,12 +560,13 @@ EOF case "${sc_kernel_bits}" in 32) HP_ARCH="hppa2.0n" ;; 64) HP_ARCH="hppa2.0w" ;; + '') HP_ARCH="hppa2.0" ;; # HP-UX 10.20 esac ;; esac - fi ;; - esac - if [ "${HP_ARCH}" = "" ]; then - sed 's/^ //' << EOF >$dummy.c + fi + if [ "${HP_ARCH}" = "" ]; then + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c #define _HPUX_SOURCE #include <stdlib.h> @@ -586,10 +599,10 @@ EOF exit (0); } EOF - (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null ) && HP_ARCH=`./$dummy` - if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi - rm -f $dummy.c $dummy - fi ;; + (CCOPTS= $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null) && HP_ARCH=`./$dummy` + if test -z "$HP_ARCH"; then HP_ARCH=hppa; fi + rm -f $dummy.c $dummy + fi ;; esac echo ${HP_ARCH}-hp-hpux${HPUX_REV} exit 0 ;; @@ -598,6 +611,7 @@ EOF echo ia64-hp-hpux${HPUX_REV} exit 0 ;; 3050*:HI-UX:*:*) + eval $set_cc_for_build sed 's/^ //' << EOF >$dummy.c #include <unistd.h> int @@ -633,7 +647,7 @@ EOF 9000/8??:4.3bsd:*:*) echo hppa1.0-hp-bsd exit 0 ;; - *9??*:MPE/iX:*:*) + *9??*:MPE/iX:*:* | *3000*:MPE/iX:*:*) echo hppa1.0-hp-mpeix exit 0 ;; hp7??:OSF1:*:* | hp8?[79]:OSF1:*:* ) @@ -652,9 +666,6 @@ EOF parisc*:Lites*:*:*) echo hppa1.1-hp-lites exit 0 ;; - hppa*:OpenBSD:*:*) - echo hppa-unknown-openbsd - exit 0 ;; C1*:ConvexOS:*:* | convex:ConvexOS:C1*:*) echo c1-convex-bsd exit 0 ;; @@ -673,16 +684,14 @@ EOF C4*:ConvexOS:*:* | convex:ConvexOS:C4*:*) echo c4-convex-bsd exit 0 ;; - CRAY*X-MP:*:*:*) - echo xmp-cray-unicos - exit 0 ;; CRAY*Y-MP:*:*:*) - echo ymp-cray-unicos${UNAME_RELEASE} + echo ymp-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*[A-Z]90:*:*:*) echo ${UNAME_MACHINE}-cray-unicos${UNAME_RELEASE} \ | sed -e 's/CRAY.*\([A-Z]90\)/\1/' \ - -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ + -e y/ABCDEFGHIJKLMNOPQRSTUVWXYZ/abcdefghijklmnopqrstuvwxyz/ \ + -e 's/\.[^.]*$/.X/' exit 0 ;; CRAY*TS:*:*:*) echo t90-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' @@ -696,18 +705,12 @@ EOF CRAY*SV1:*:*:*) echo sv1-cray-unicos${UNAME_RELEASE} | sed -e 's/\.[^.]*$/.X/' exit 0 ;; - CRAY-2:*:*:*) - echo cray2-cray-unicos - exit 0 ;; F30[01]:UNIX_System_V:*:* | F700:UNIX_System_V:*:*) FUJITSU_PROC=`uname -m | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz'` FUJITSU_SYS=`uname -p | tr 'ABCDEFGHIJKLMNOPQRSTUVWXYZ' 'abcdefghijklmnopqrstuvwxyz' | sed -e 's/\///'` FUJITSU_REL=`echo ${UNAME_RELEASE} | sed -e 's/ /_/'` echo "${FUJITSU_PROC}-fujitsu-${FUJITSU_SYS}${FUJITSU_REL}" exit 0 ;; - hp300:OpenBSD:*:*) - echo m68k-unknown-openbsd${UNAME_RELEASE} - exit 0 ;; i*86:BSD/386:*:* | i*86:BSD/OS:*:* | *:Ascend\ Embedded/OS:*:*) echo ${UNAME_MACHINE}-pc-bsdi${UNAME_RELEASE} exit 0 ;; @@ -720,9 +723,6 @@ EOF *:FreeBSD:*:*) echo ${UNAME_MACHINE}-unknown-freebsd`echo ${UNAME_RELEASE}|sed -e 's/[-(].*//'` exit 0 ;; - *:OpenBSD:*:*) - echo ${UNAME_MACHINE}-unknown-openbsd`echo ${UNAME_RELEASE}|sed -e 's/[-_].*/\./'` - exit 0 ;; i*:CYGWIN*:*) echo ${UNAME_MACHINE}-pc-cygwin exit 0 ;; @@ -732,6 +732,9 @@ EOF i*:PW*:*) echo ${UNAME_MACHINE}-pc-pw32 exit 0 ;; + x86:Interix*:3*) + echo i386-pc-interix3 + exit 0 ;; i*:Windows_NT*:* | Pentium*:Windows_NT*:*) # How do we know it's Interix rather than the generic POSIX subsystem? # It also conflicts with pre-2.0 versions of AT&T UWIN. Should we @@ -757,103 +760,49 @@ EOF echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; ia64:Linux:*:*) - echo ${UNAME_MACHINE}-unknown-linux + echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; m68*:Linux:*:*) echo ${UNAME_MACHINE}-unknown-linux-gnu exit 0 ;; mips:Linux:*:*) - cat >$dummy.c <<EOF -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ -int main (int argc, char *argv[]) { -#else -int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __MIPSEB__ - printf ("%s-unknown-linux-gnu\n", argv[1]); -#endif -#ifdef __MIPSEL__ - printf ("%sel-unknown-linux-gnu\n", argv[1]); -#endif - return 0; -} + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #undef CPU + #undef mips + #undef mipsel + #if defined(__MIPSEL__) || defined(__MIPSEL) || defined(_MIPSEL) || defined(MIPSEL) + CPU=mipsel + #else + #if defined(__MIPSEB__) || defined(__MIPSEB) || defined(_MIPSEB) || defined(MIPSEB) + CPU=mips + #else + CPU= + #endif + #endif EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^CPU=` + rm -f $dummy.c + test x"${CPU}" != x && echo "${CPU}-pc-linux-gnu" && exit 0 ;; ppc:Linux:*:*) - # Determine Lib Version - cat >$dummy.c <<EOF -#include <features.h> -#if defined(__GLIBC__) -extern char __libc_version[]; -extern char __libc_release[]; -#endif -main(argc, argv) - int argc; - char *argv[]; -{ -#if defined(__GLIBC__) - printf("%s %s\n", __libc_version, __libc_release); -#else - printf("unknown\n"); -#endif - return 0; -} -EOF - LIBC="" - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null - if test "$?" = 0 ; then - ./$dummy | grep 1\.99 > /dev/null - if test "$?" = 0 ; then LIBC="libc1" ; fi - fi - rm -f $dummy.c $dummy - echo powerpc-unknown-linux-gnu${LIBC} + echo powerpc-unknown-linux-gnu + exit 0 ;; + ppc64:Linux:*:*) + echo powerpc64-unknown-linux-gnu exit 0 ;; alpha:Linux:*:*) - cat <<EOF >$dummy.s - .data - \$Lformat: - .byte 37,100,45,37,120,10,0 # "%d-%x\n" - .text - .globl main - .align 4 - .ent main - main: - .frame \$30,16,\$26,0 - ldgp \$29,0(\$27) - .prologue 1 - .long 0x47e03d80 # implver \$0 - lda \$2,-1 - .long 0x47e20c21 # amask \$2,\$1 - lda \$16,\$Lformat - mov \$0,\$17 - not \$1,\$18 - jsr \$26,printf - ldgp \$29,0(\$26) - mov 0,\$16 - jsr \$26,exit - .end main -EOF - LIBC="" - $CC_FOR_BUILD $dummy.s -o $dummy 2>/dev/null - if test "$?" = 0 ; then - case `./$dummy` in - 0-0) UNAME_MACHINE="alpha" ;; - 1-0) UNAME_MACHINE="alphaev5" ;; - 1-1) UNAME_MACHINE="alphaev56" ;; - 1-101) UNAME_MACHINE="alphapca56" ;; - 2-303) UNAME_MACHINE="alphaev6" ;; - 2-307) UNAME_MACHINE="alphaev67" ;; - esac - objdump --private-headers $dummy | \ - grep ld.so.1 > /dev/null - if test "$?" = 0 ; then - LIBC="libc1" - fi - fi - rm -f $dummy.s $dummy + case `sed -n '/^cpu model/s/^.*: \(.*\)/\1/p' < /proc/cpuinfo` in + EV5) UNAME_MACHINE=alphaev5 ;; + EV56) UNAME_MACHINE=alphaev56 ;; + PCA56) UNAME_MACHINE=alphapca56 ;; + PCA57) UNAME_MACHINE=alphapca56 ;; + EV6) UNAME_MACHINE=alphaev6 ;; + EV67) UNAME_MACHINE=alphaev67 ;; + EV68*) UNAME_MACHINE=alphaev68 ;; + esac + objdump --private-headers /bin/sh | grep ld.so.1 >/dev/null + if test "$?" = 0 ; then LIBC="libc1" ; else LIBC="" ; fi echo ${UNAME_MACHINE}-unknown-linux-gnu${LIBC} exit 0 ;; parisc:Linux:*:* | hppa:Linux:*:*) @@ -883,7 +832,8 @@ EOF # The BFD linker knows what the default object file format is, so # first see if it will tell us. cd to the root directory to prevent # problems with other programs or directories called `ld' in the path. - ld_supported_targets=`cd /; ld --help 2>&1 \ + # Set LC_ALL=C to ensure ld outputs messages in English. + ld_supported_targets=`cd /; LC_ALL=C ld --help 2>&1 \ | sed -ne '/supported targets:/!d s/[ ][ ]*/ /g s/.*supported targets: *// @@ -906,37 +856,36 @@ EOF exit 0 ;; esac # Determine whether the default compiler is a.out or elf - cat >$dummy.c <<EOF -#include <features.h> -#ifdef __cplusplus -#include <stdio.h> /* for printf() prototype */ - int main (int argc, char *argv[]) { -#else - int main (argc, argv) int argc; char *argv[]; { -#endif -#ifdef __ELF__ -# ifdef __GLIBC__ -# if __GLIBC__ >= 2 - printf ("%s-pc-linux-gnu\n", argv[1]); -# else - printf ("%s-pc-linux-gnulibc1\n", argv[1]); -# endif -# else - printf ("%s-pc-linux-gnulibc1\n", argv[1]); -# endif -#else - printf ("%s-pc-linux-gnuaout\n", argv[1]); -#endif - return 0; -} + eval $set_cc_for_build + sed 's/^ //' << EOF >$dummy.c + #include <features.h> + #ifdef __ELF__ + # ifdef __GLIBC__ + # if __GLIBC__ >= 2 + LIBC=gnu + # else + LIBC=gnulibc1 + # endif + # else + LIBC=gnulibc1 + # endif + #else + #ifdef __INTEL_COMPILER + LIBC=gnu + #else + LIBC=gnuaout + #endif + #endif EOF - $CC_FOR_BUILD $dummy.c -o $dummy 2>/dev/null && ./$dummy "${UNAME_MACHINE}" && rm -f $dummy.c $dummy && exit 0 - rm -f $dummy.c $dummy + eval `$CC_FOR_BUILD -E $dummy.c 2>/dev/null | grep ^LIBC=` + rm -f $dummy.c + test x"${LIBC}" != x && echo "${UNAME_MACHINE}-pc-linux-${LIBC}" && exit 0 test x"${TENTATIVE}" != x && echo "${TENTATIVE}" && exit 0 ;; -# ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. earlier versions -# are messed up and put the nodename in both sysname and nodename. i*86:DYNIX/ptx:4*:*) + # ptx 4.0 does uname -s correctly, with DYNIX/ptx in there. + # earlier versions are messed up and put the nodename in both + # sysname and nodename. echo i386-sequent-sysv4 exit 0 ;; i*86:UNIX_SV:4.2MP:2.*) @@ -955,14 +904,13 @@ EOF echo ${UNAME_MACHINE}-pc-sysv${UNAME_REL} fi exit 0 ;; - i*86:*:5:7*) - # Fixed at (any) Pentium or better - UNAME_MACHINE=i586 - if [ ${UNAME_SYSTEM} = "UnixWare" ] ; then - echo ${UNAME_MACHINE}-sco-sysv${UNAME_RELEASE}uw${UNAME_VERSION} - else - echo ${UNAME_MACHINE}-pc-sysv${UNAME_RELEASE} - fi + i*86:*:5:[78]*) + case `/bin/uname -X | grep "^Machine"` in + *486*) UNAME_MACHINE=i486 ;; + *Pentium) UNAME_MACHINE=i586 ;; + *Pent*|*Celeron) UNAME_MACHINE=i686 ;; + esac + echo ${UNAME_MACHINE}-unknown-sysv${UNAME_RELEASE}${UNAME_SYSTEM}${UNAME_VERSION} exit 0 ;; i*86:*:3.2:*) if test -f /usr/options/cb.name; then @@ -1010,7 +958,7 @@ EOF exit 0 ;; M68*:*:R3V[567]*:*) test -r /sysV68 && echo 'm68k-motorola-sysv' && exit 0 ;; - 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 4850:*:4.0:3.0) + 3[34]??:*:4.0:3.0 | 3[34]??A:*:4.0:3.0 | 3[34]??,*:*:4.0:3.0 | 3[34]??/*:*:4.0:3.0 | 4850:*:4.0:3.0 | SKA40:*:4.0:3.0) OS_REL='' test -r /etc/.relid \ && OS_REL=.`sed -n 's/[^ ]* [^ ]* \([0-9][0-9]\).*/\1/p' < /etc/.relid` @@ -1056,8 +1004,8 @@ EOF echo ns32k-sni-sysv fi exit 0 ;; - PENTIUM:CPunix:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort - # says <Richard.M.Bartel@ccMail.Census.GOV> + PENTIUM:*:4.0*:*) # Unisys `ClearPath HMP IX 4000' SVR4/MP effort + # says <Richard.M.Bartel@ccMail.Census.GOV> echo i586-unisys-sysv4 exit 0 ;; *:UNIX_System_V:4*:FTX*) @@ -1069,6 +1017,10 @@ EOF # From seanf@swdc.stratus.com. echo i860-stratus-sysv4 exit 0 ;; + *:VOS:*:*) + # From Paul.Green@stratus.com. + echo hppa1.1-stratus-vos + exit 0 ;; mc68*:A/UX:*:*) echo m68k-apple-aux${UNAME_RELEASE} exit 0 ;; @@ -1107,15 +1059,17 @@ EOF echo `uname -p`-apple-darwin${UNAME_RELEASE} exit 0 ;; *:procnto*:*:* | *:QNX:[0123456789]*:*) - if test "${UNAME_MACHINE}" = "x86pc"; then + UNAME_PROCESSOR=`uname -p` + if test "$UNAME_PROCESSOR" = "x86"; then + UNAME_PROCESSOR=i386 UNAME_MACHINE=pc fi - echo `uname -p`-${UNAME_MACHINE}-nto-qnx + echo ${UNAME_PROCESSOR}-${UNAME_MACHINE}-nto-qnx${UNAME_RELEASE} exit 0 ;; *:QNX:*:4*) echo i386-pc-qnx exit 0 ;; - NSR-[KW]:NONSTOP_KERNEL:*:*) + NSR-[GKLNPTVW]:NONSTOP_KERNEL:*:*) echo nsr-tandem-nsk${UNAME_RELEASE} exit 0 ;; *:NonStop-UX:*:*) @@ -1161,11 +1115,18 @@ EOF *:ITS:*:*) echo pdp10-unknown-its exit 0 ;; + i*86:XTS-300:*:STOP) + echo ${UNAME_MACHINE}-unknown-stop + exit 0 ;; + i*86:atheos:*:*) + echo ${UNAME_MACHINE}-unknown-atheos + exit 0 ;; esac #echo '(No uname command or uname output not recognized.)' 1>&2 #echo "${UNAME_MACHINE}:${UNAME_SYSTEM}:${UNAME_RELEASE}:${UNAME_VERSION}" 1>&2 +eval $set_cc_for_build cat >$dummy.c <<EOF #ifdef _SEQUENT_ # include <sys/types.h> @@ -1,9 +1,9 @@ #! /bin/sh # Configuration validation subroutine script. -# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001 -# Free Software Foundation, Inc. +# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1997, 1998, 1999, +# 2000, 2001, 2002 Free Software Foundation, Inc. -timestamp='2001-05-30' +timestamp='2002-03-07' # This file is (in principle) common to ALL GNU software. # The presence of a machine in this file suggests that SOME GNU software @@ -29,7 +29,8 @@ timestamp='2001-05-30' # configuration script generated by Autoconf, you may include it under # the same distribution terms that you use for the rest of that program. -# Please send patches to <config-patches@gnu.org>. +# Please send patches to <config-patches@gnu.org>. Submit a context +# diff and a properly formatted ChangeLog entry. # # Configuration subroutine to validate and canonicalize a configuration type. # Supply the specified configuration type as an argument. @@ -117,7 +118,7 @@ esac # Here we must recognize all the valid KERNEL-OS combinations. maybe_os=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\2/'` case $maybe_os in - nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-*) + nto-qnx* | linux-gnu* | storm-chaos* | os2-emx* | windows32-* | rtmk-nova*) os=-$maybe_os basic_machine=`echo $1 | sed 's/^\(.*\)-\([^-]*-[^-]*\)$/\1/'` ;; @@ -157,6 +158,14 @@ case $os in os=-vxworks basic_machine=$1 ;; + -chorusos*) + os=-chorusos + basic_machine=$1 + ;; + -chorusrdb) + os=-chorusrdb + basic_machine=$1 + ;; -hiux*) os=-hiuxwe2 ;; @@ -215,26 +224,36 @@ esac case $basic_machine in # Recognize the basic CPU types without company name. # Some are omitted here because they have special meanings below. - tahoe | i860 | ia64 | m32r | m68k | m68000 | m88k | ns32k | arc \ - | arm | arme[lb] | arm[bl]e | armv[2345] | armv[345][lb] | strongarm | xscale \ - | pyramid | mn10200 | mn10300 | tron | a29k \ - | 580 | i960 | h8300 \ - | x86 | ppcbe | mipsbe | mipsle | shbe | shle \ - | hppa | hppa1.0 | hppa1.1 | hppa2.0 | hppa2.0w | hppa2.0n \ - | hppa64 \ - | alpha | alphaev[4-8] | alphaev56 | alphapca5[67] \ - | alphaev6[78] \ - | we32k | ns16k | clipper | i370 | sh | sh[34] \ - | powerpc | powerpcle \ - | 1750a | dsp16xx | pdp10 | pdp11 \ - | mips16 | mips64 | mipsel | mips64el \ - | mips64orion | mips64orionel | mipstx39 | mipstx39el \ - | mips64vr4300 | mips64vr4300el | mips64vr4100 | mips64vr4100el \ - | mips64vr5000 | miprs64vr5000el | mcore | s390 | s390x \ - | sparc | sparclet | sparclite | sparc64 | sparcv9 | sparcv9b \ - | v850 | c4x \ - | thumb | d10v | d30v | fr30 | avr | openrisc | tic80 \ - | pj | pjl | h8500 | z8k) + 1750a | 580 \ + | a29k \ + | alpha | alphaev[4-8] | alphaev56 | alphaev6[78] | alphapca5[67] \ + | alpha64 | alpha64ev[4-8] | alpha64ev56 | alpha64ev6[78] | alpha64pca5[67] \ + | arc | arm | arm[bl]e | arme[lb] | armv[2345] | armv[345][lb] | avr \ + | c4x | clipper \ + | d10v | d30v | dsp16xx \ + | fr30 \ + | h8300 | h8500 | hppa | hppa1.[01] | hppa2.0 | hppa2.0[nw] | hppa64 \ + | i370 | i860 | i960 | ia64 \ + | m32r | m68000 | m68k | m88k | mcore \ + | mips | mips16 | mips64 | mips64el | mips64orion | mips64orionel \ + | mips64vr4100 | mips64vr4100el | mips64vr4300 \ + | mips64vr4300el | mips64vr5000 | mips64vr5000el \ + | mipsbe | mipseb | mipsel | mipsle | mipstx39 | mipstx39el \ + | mipsisa32 | mipsisa64 \ + | mn10200 | mn10300 \ + | ns16k | ns32k \ + | openrisc | or32 \ + | pdp10 | pdp11 | pj | pjl \ + | powerpc | powerpc64 | powerpc64le | powerpcle | ppcbe \ + | pyramid \ + | sh | sh[34] | sh[34]eb | shbe | shle | sh64 \ + | sparc | sparc64 | sparc86x | sparclet | sparclite | sparcv9 | sparcv9b \ + | strongarm \ + | tahoe | thumb | tic80 | tron \ + | v850 | v850e \ + | we32k \ + | x86 | xscale | xstormy16 | xtensa \ + | z8k) basic_machine=$basic_machine-unknown ;; m6811 | m68hc11 | m6812 | m68hc12) @@ -257,31 +276,45 @@ case $basic_machine in exit 1 ;; # Recognize the basic CPU types with company name. - # FIXME: clean up the formatting here. - vax-* | tahoe-* | i*86-* | i860-* | ia64-* | m32r-* | m68k-* | m68000-* \ - | m88k-* | sparc-* | ns32k-* | fx80-* | arc-* | c[123]* \ - | arm-* | armbe-* | armle-* | armv*-* | strongarm-* | xscale-* \ - | mips-* | pyramid-* | tron-* | a29k-* | romp-* | rs6000-* \ - | power-* | none-* | 580-* | cray2-* | h8300-* | h8500-* | i960-* \ - | xmp-* | ymp-* \ - | x86-* | ppcbe-* | mipsbe-* | mipsle-* | shbe-* | shle-* \ - | hppa-* | hppa1.0-* | hppa1.1-* | hppa2.0-* | hppa2.0w-* \ - | hppa2.0n-* | hppa64-* \ - | alpha-* | alphaev[4-8]-* | alphaev56-* | alphapca5[67]-* \ - | alphaev6[78]-* \ - | we32k-* | cydra-* | ns16k-* | pn-* | np1-* | xps100-* \ - | clipper-* | orion-* \ - | sparclite-* | pdp10-* | pdp11-* | sh-* | sh[34]-* | sh[34]eb-* \ - | powerpc-* | powerpcle-* | sparc64-* | sparcv9-* | sparcv9b-* | sparc86x-* \ - | mips16-* | mips64-* | mipsel-* \ - | mips64el-* | mips64orion-* | mips64orionel-* \ - | mips64vr4100-* | mips64vr4100el-* | mips64vr4300-* | mips64vr4300el-* \ - | mipstx39-* | mipstx39el-* | mcore-* \ - | f30[01]-* | f700-* | s390-* | s390x-* | sv1-* | t3e-* \ - | [cjt]90-* \ - | m88110-* | m680[01234]0-* | m683?2-* | m68360-* | z8k-* | d10v-* \ - | thumb-* | v850-* | d30v-* | tic30-* | tic80-* | c30-* | fr30-* \ - | bs2000-* | tic54x-* | c54x-* | x86_64-* | pj-* | pjl-*) + 580-* \ + | a29k-* \ + | alpha-* | alphaev[4-8]-* | alphaev56-* | alphaev6[78]-* \ + | alpha64-* | alpha64ev[4-8]-* | alpha64ev56-* | alpha64ev6[78]-* \ + | alphapca5[67]-* | alpha64pca5[67]-* | arc-* \ + | arm-* | armbe-* | armle-* | armv*-* \ + | avr-* \ + | bs2000-* \ + | c[123]* | c30-* | [cjt]90-* | c54x-* \ + | clipper-* | cydra-* \ + | d10v-* | d30v-* \ + | elxsi-* \ + | f30[01]-* | f700-* | fr30-* | fx80-* \ + | h8300-* | h8500-* \ + | hppa-* | hppa1.[01]-* | hppa2.0-* | hppa2.0[nw]-* | hppa64-* \ + | i*86-* | i860-* | i960-* | ia64-* \ + | m32r-* \ + | m68000-* | m680[012346]0-* | m68360-* | m683?2-* | m68k-* \ + | m88110-* | m88k-* | mcore-* \ + | mips-* | mips16-* | mips64-* | mips64el-* | mips64orion-* \ + | mips64orionel-* | mips64vr4100-* | mips64vr4100el-* \ + | mips64vr4300-* | mips64vr4300el-* | mipsbe-* | mipseb-* \ + | mipsle-* | mipsel-* | mipstx39-* | mipstx39el-* \ + | none-* | np1-* | ns16k-* | ns32k-* \ + | orion-* \ + | pdp10-* | pdp11-* | pj-* | pjl-* | pn-* | power-* \ + | powerpc-* | powerpc64-* | powerpc64le-* | powerpcle-* | ppcbe-* \ + | pyramid-* \ + | romp-* | rs6000-* \ + | sh-* | sh[34]-* | sh[34]eb-* | shbe-* | shle-* | sh64-* \ + | sparc-* | sparc64-* | sparc86x-* | sparclet-* | sparclite-* \ + | sparcv9-* | sparcv9b-* | strongarm-* | sv1-* | sx?-* \ + | tahoe-* | thumb-* | tic30-* | tic54x-* | tic80-* | tron-* \ + | v850-* | v850e-* | vax-* \ + | we32k-* \ + | x86-* | x86_64-* | xps100-* | xscale-* | xstormy16-* \ + | xtensa-* \ + | ymp-* \ + | z8k-*) ;; # Recognize the various machine names and aliases which stand # for a CPU type and a company and sometimes even an OS. @@ -344,6 +377,10 @@ case $basic_machine in basic_machine=ns32k-sequent os=-dynix ;; + c90) + basic_machine=c90-cray + os=-unicos + ;; convex-c1) basic_machine=c1-convex os=-bsd @@ -364,16 +401,8 @@ case $basic_machine in basic_machine=c38-convex os=-bsd ;; - cray | ymp) - basic_machine=ymp-cray - os=-unicos - ;; - cray2) - basic_machine=cray2-cray - os=-unicos - ;; - [cjt]90) - basic_machine=${basic_machine}-cray + cray | j90) + basic_machine=j90-cray os=-unicos ;; crds | unos) @@ -388,6 +417,14 @@ case $basic_machine in decstation | decstation-3100 | pmax | pmax-* | pmin | dec3100 | decstatn) basic_machine=mips-dec ;; + decsystem10* | dec10*) + basic_machine=pdp10-dec + os=-tops10 + ;; + decsystem20* | dec20*) + basic_machine=pdp10-dec + os=-tops20 + ;; delta | 3300 | motorola-3300 | motorola-delta \ | 3300-motorola | delta-motorola) basic_machine=m68k-motorola @@ -568,14 +605,6 @@ case $basic_machine in basic_machine=m68k-atari os=-mint ;; - mipsel*-linux*) - basic_machine=mipsel-unknown - os=-linux-gnu - ;; - mips*-linux*) - basic_machine=mips-unknown - os=-linux-gnu - ;; mips3*-*) basic_machine=`echo $basic_machine | sed -e 's/mips3/mips64/'` ;; @@ -590,6 +619,10 @@ case $basic_machine in basic_machine=m68k-rom68k os=-coff ;; + morphos) + basic_machine=powerpc-unknown + os=-morphos + ;; msdos) basic_machine=i386-pc os=-msdos @@ -669,6 +702,10 @@ case $basic_machine in basic_machine=hppa1.1-oki os=-proelf ;; + or32 | or32-*) + basic_machine=or32-unknown + os=-coff + ;; OSE68000 | ose68000) basic_machine=m68000-ericsson os=-ose @@ -694,7 +731,7 @@ case $basic_machine in pc532 | pc532-*) basic_machine=ns32k-pc532 ;; - pentium | p5 | k5 | k6 | nexgen) + pentium | p5 | k5 | k6 | nexgen | viac3) basic_machine=i586-pc ;; pentiumpro | p6 | 6x86 | athlon) @@ -703,7 +740,7 @@ case $basic_machine in pentiumii | pentium2) basic_machine=i686-pc ;; - pentium-* | p5-* | k5-* | k6-* | nexgen-*) + pentium-* | p5-* | k5-* | k6-* | nexgen-* | viac3-*) basic_machine=i586-`echo $basic_machine | sed 's/^[^-]*-//'` ;; pentiumpro-* | p6-* | 6x86-* | athlon-*) @@ -727,6 +764,16 @@ case $basic_machine in ppcle-* | powerpclittle-*) basic_machine=powerpcle-`echo $basic_machine | sed 's/^[^-]*-//'` ;; + ppc64) basic_machine=powerpc64-unknown + ;; + ppc64-*) basic_machine=powerpc64-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; + ppc64le | powerpc64little | ppc64-le | powerpc64-little) + basic_machine=powerpc64le-unknown + ;; + ppc64le-* | powerpc64little-*) + basic_machine=powerpc64le-`echo $basic_machine | sed 's/^[^-]*-//'` + ;; ps2) basic_machine=i386-ibm ;; @@ -744,6 +791,12 @@ case $basic_machine in rtpc | rtpc-*) basic_machine=romp-ibm ;; + s390 | s390-*) + basic_machine=s390-ibm + ;; + s390x | s390x-*) + basic_machine=s390x-ibm + ;; sa29200) basic_machine=a29k-amd os=-udi @@ -755,7 +808,7 @@ case $basic_machine in basic_machine=sh-hitachi os=-hms ;; - sparclite-wrs) + sparclite-wrs | simso-wrs) basic_machine=sparclite-wrs os=-vxworks ;; @@ -813,7 +866,7 @@ case $basic_machine in sun386 | sun386i | roadrunner) basic_machine=i386-sun ;; - sv1) + sv1) basic_machine=sv1-cray os=-unicos ;; @@ -821,8 +874,16 @@ case $basic_machine in basic_machine=i386-sequent os=-dynix ;; + t3d) + basic_machine=alpha-cray + os=-unicos + ;; t3e) - basic_machine=t3e-cray + basic_machine=alphaev5-cray + os=-unicos + ;; + t90) + basic_machine=t90-cray os=-unicos ;; tic54x | c54x*) @@ -835,6 +896,10 @@ case $basic_machine in tx39el) basic_machine=mipstx39el-unknown ;; + toad1) + basic_machine=pdp10-xkl + os=-tops20 + ;; tower | tower-32) basic_machine=m68k-ncr ;; @@ -885,13 +950,13 @@ case $basic_machine in basic_machine=i386-pc os=-windows32-msvcrt ;; - xmp) - basic_machine=xmp-cray - os=-unicos - ;; xps | xps100) basic_machine=xps100-honeywell ;; + ymp) + basic_machine=ymp-cray + os=-unicos + ;; z8k-*-coff) basic_machine=z8k-unknown os=-sim @@ -912,13 +977,6 @@ case $basic_machine in op60c) basic_machine=hppa1.1-oki ;; - mips) - if [ x$os = x-linux-gnu ]; then - basic_machine=mips-unknown - else - basic_machine=mips-mips - fi - ;; romp) basic_machine=romp-ibm ;; @@ -938,9 +996,12 @@ case $basic_machine in we32k) basic_machine=we32k-att ;; - sh3 | sh4) + sh3 | sh4 | sh3eb | sh4eb) basic_machine=sh-unknown ;; + sh64) + basic_machine=sh64-unknown + ;; sparc | sparcv9 | sparcv9b) basic_machine=sparc-sun ;; @@ -1022,11 +1083,14 @@ case $os in | -lynxos* | -bosx* | -nextstep* | -cxux* | -aout* | -elf* | -oabi* \ | -ptx* | -coff* | -ecoff* | -winnt* | -domain* | -vsta* \ | -udi* | -eabi* | -lites* | -ieee* | -go32* | -aux* \ + | -chorusos* | -chorusrdb* \ | -cygwin* | -pe* | -psos* | -moss* | -proelf* | -rtems* \ | -mingw32* | -linux-gnu* | -uxpv* | -beos* | -mpeix* | -udk* \ | -interix* | -uwin* | -rhapsody* | -darwin* | -opened* \ | -openstep* | -oskit* | -conix* | -pw32* | -nonstopux* \ - | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* | -os2*) + | -storm-chaos* | -tops10* | -tenex* | -tops20* | -its* \ + | -os2* | -vos* | -palmos* | -uclinux* | -nucleus* \ + | -morphos* | -superux* | -rtmk* | -rtmk-nova*) # Remember, each alternative MUST END IN *, to match a version number. ;; -qnx*) @@ -1078,12 +1142,18 @@ case $os in -acis*) os=-aos ;; + -atheos*) + os=-atheos + ;; -386bsd) os=-bsd ;; -ctix* | -uts*) os=-sysv ;; + -nova*) + os=-rtmk-nova + ;; -ns2 ) os=-nextstep2 ;; @@ -1158,6 +1228,7 @@ case $basic_machine in arm*-semi) os=-aout ;; + # This must come before the *-dec entry. pdp10-*) os=-tops20 ;; @@ -1188,6 +1259,9 @@ case $basic_machine in mips*-*) os=-elf ;; + or32-*) + os=-coff + ;; *-tti) # must be before sparc entry or we get the wrong os. os=-sysv3 ;; @@ -1350,6 +1424,9 @@ case $basic_machine in -*mint | -mint[0-9]* | -*MiNT | -MiNT[0-9]*) vendor=atari ;; + -vos*) + vendor=stratus + ;; esac basic_machine=`echo $basic_machine | sed "s/unknown/$vendor/"` ;; @@ -49,14 +49,14 @@ EOF fi # The name of this program. -progname=`$echo "$0" | sed 's%^.*/%%'` +progname=`$echo "$0" | ${SED} 's%^.*/%%'` modename="$progname" # Constants. PROGRAM=ltmain.sh PACKAGE=libtool -VERSION=1.4b -TIMESTAMP=" (1.971 2001/07/09 22:02:09)" +VERSION=1.4.2a +TIMESTAMP=" (1.922.2.94 2002/06/11 15:58:53)" default_mode= help="Try \`$progname --help' for more information." @@ -67,10 +67,19 @@ rm="rm -f" # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' +Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -SP2NL='tr \040 \012' -NL2SP='tr \015\012 \040\040' +# test EBCDIC or ASCII +case `echo A|od -x` in + *[Cc]1*) # EBCDIC based system + SP2NL="tr '\100' '\n'" + NL2SP="tr '\r\n' '\100\100'" + ;; + *) # Assume ASCII based system + SP2NL="tr '\040' '\012'" + NL2SP="tr '\015\012' '\040\040'" + ;; +esac # NLS nuisances. # Only set LANG and LC_ALL to C if already set. @@ -84,6 +93,9 @@ if test "${LANG+set}" = set; then save_LANG="$LANG"; LANG=C; export LANG fi +# Make sure IFS has a sensible default +: ${IFS=" "} + if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then echo "$modename: not configured to build any kind of library" 1>&2 echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 @@ -119,33 +131,6 @@ do execute_dlfiles) execute_dlfiles="$execute_dlfiles $arg" ;; - tag) - tagname="$arg" - - # Check whether tagname contains only valid characters - case $tagname in - *[!-_A-Za-z0-9,/]*) - echo "$progname: invalid tag name: $tagname" 1>&2 - exit 1 - ;; - esac - - case $tagname in - CC) - # Don't test for the "default" C tag, as we know, it's there, but - # not specially marked. - ;; - *) - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$0" > /dev/null; then - taglist="$taglist $tagname" - # Evaluate the configuration. - eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $0`" - else - echo "$progname: ignoring unknown tag $tagname" 1>&2 - fi - ;; - esac - ;; *) eval "$prev=\$arg" ;; @@ -164,20 +149,11 @@ do --version) echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - echo - echo "Copyright 1996, 1997, 1998, 1999, 2000, 2001" - echo "Free Software Foundation, Inc." - echo "This is free software; see the source for copying conditions. There is NO" - echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." exit 0 ;; --config) - sed -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 - # Now print the configurations for the tags. - for tagname in $taglist; do - sed -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$0" - done + ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 exit 0 ;; @@ -210,17 +186,12 @@ do --mode) prevopt="--mode" prev=mode ;; --mode=*) mode="$optarg" ;; + --preserve-dup-deps) duplicate_deps="yes" ;; + --quiet | --silent) show=: ;; - --tag) prevopt="--tag" prev=tag ;; - --tag=*) - set tag "$optarg" ${1+"$@"} - shift - prev=tag - ;; - -dlopen) prevopt="-dlopen" prev=execute_dlfiles @@ -377,7 +348,7 @@ if test -z "$show_help"; then -Wc,*) args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` lastarg= - IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + save_ifs="$IFS"; IFS=',' for arg in $args; do IFS="$save_ifs" @@ -461,7 +432,7 @@ if test -z "$show_help"; then # Recognize several different file suffixes. # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSifmso]' + xform='[cCFSfmso]' case $libobj in *.ada) xform=ada ;; *.adb) xform=adb ;; @@ -469,13 +440,10 @@ if test -z "$show_help"; then *.asm) xform=asm ;; *.c++) xform=c++ ;; *.cc) xform=cc ;; - *.ii) xform=ii ;; - *.class) xform=class ;; *.cpp) xform=cpp ;; *.cxx) xform=cxx ;; *.f90) xform=f90 ;; *.for) xform=for ;; - *.java) xform=java ;; esac libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` @@ -488,59 +456,6 @@ if test -z "$show_help"; then ;; esac - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. - # Only attempt this if the compiler in the base compile - # command doesn't match the default compiler. - if test -n "$available_tags" && test -z "$tagname"; then - case $base_compile in - "$CC "*) ;; - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when ltconfig was run. - "`$echo $CC` "*) ;; - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then - # Evaluate the configuration. - eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" - case $base_compile in - "$CC "*) - # The compiler in the base compile command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - "`$echo $CC` "*) - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - echo "$modename: unable to infer tagged configuration" - echo "$modename: specify a tag with \`--tag'" 1>&2 - exit 1 -# else -# echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi - - objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir= - else - xdir=$xdir/ - fi - lobj=${xdir}$objdir/$objname - if test -z "$base_compile"; then $echo "$modename: you must specify a compilation command" 1>&2 $echo "$help" 1>&2 @@ -549,9 +464,9 @@ if test -z "$show_help"; then # Delete any leftover library objects. if test "$build_old_libs" = yes; then - removelist="$obj $lobj $libobj ${libobj}T" + removelist="$obj $libobj" else - removelist="$lobj $libobj ${libobj}T" + removelist="$libobj" fi $run $rm $removelist @@ -576,7 +491,6 @@ if test -z "$show_help"; then removelist="$removelist $output_obj $lockfile" trap "$run $rm $removelist; exit 1" 1 2 15 else - output_obj= need_locks=no lockfile= fi @@ -611,48 +525,49 @@ compiler." eval srcfile=\"$fix_srcfile_path\" fi - $run $rm "$libobj" "${libobj}T" - - # Create a libtool object file (analogous to a ".la" file), - # but don't create it if we're doing a dry run. - test -z "$run" && cat > ${libobj}T <<EOF -# $libobj - a libtool object file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# Name of the PIC object. -EOF - # Only build a PIC object if we are building libtool libraries. if test "$build_libtool_libs" = yes; then # Without this assignment, base_compile gets emptied. fbsd_hideous_sh_bug=$base_compile if test "$pic_mode" != no; then - command="$base_compile $srcfile $pic_flag" + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" else # Don't build PIC code command="$base_compile $srcfile" fi + if test "$build_old_libs" = yes; then + lo_libobj="$libobj" + dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$libobj"; then + dir="$objdir" + else + dir="$dir/$objdir" + fi + libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - if test ! -d ${xdir}$objdir; then - $show "$mkdir ${xdir}$objdir" - $run $mkdir ${xdir}$objdir - status=$? - if test $status -ne 0 && test ! -d ${xdir}$objdir; then - exit $status - fi - fi - - if test -z "$output_obj"; then - # Place PIC objects in $objdir - command="$command -o $lobj" + if test -d "$dir"; then + $show "$rm $libobj" + $run $rm $libobj + else + $show "$mkdir $dir" + $run $mkdir $dir + status=$? + if test $status -ne 0 && test ! -d $dir; then + exit $status + fi + fi + fi + if test "$compiler_o_lo" = yes; then + output_obj="$libobj" + command="$command -o $output_obj" + elif test "$compiler_c_o" = yes; then + output_obj="$obj" + command="$command -o $output_obj" fi - $run $rm "$lobj" "$output_obj" - + $run $rm "$output_obj" $show "$command" if $run eval "$command"; then : else @@ -681,9 +596,9 @@ compiler." fi # Just move the object if needed, then go on to compile the next one - if test -n "$output_obj" && test "x$output_obj" != "x$lobj"; then - $show "$mv $output_obj $lobj" - if $run $mv $output_obj $lobj; then : + if test x"$output_obj" != x"$libobj"; then + $show "$mv $output_obj $libobj" + if $run $mv $output_obj $libobj; then : else error=$? $run $rm $removelist @@ -691,21 +606,48 @@ compiler." fi fi - # Append the name of the PIC object to the libtool object file. - test -z "$run" && cat >> ${libobj}T <<EOF -pic_object='$objdir/$objname' + # If we have no pic_flag, then copy the object into place and finish. + if (test -z "$pic_flag" || test "$pic_mode" != default) && + test "$build_old_libs" = yes; then + # Rename the .lo from within objdir to obj + if test -f $obj; then + $show $rm $obj + $run $rm $obj + fi -EOF + $show "$mv $libobj $obj" + if $run $mv $libobj $obj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` + libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` + # Now arrange that obj and lo_libobj become the same file + $show "(cd $xdir && $LN_S $baseobj $libobj)" + if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then + # Unlock the critical section if it was locked + if test "$need_locks" != no; then + $run $rm "$lockfile" + fi + exit 0 + else + error=$? + $run $rm $removelist + exit $error + fi + fi # Allow error messages only from the first compilation. suppress_output=' >/dev/null 2>&1' - else - # No PIC object so indicate it doesn't exist in the libtool - # object file. - test -z "$run" && cat >> ${libobj}T <<EOF -pic_object=none - -EOF fi # Only build a position-dependent object if we build old libraries. @@ -714,15 +656,17 @@ EOF # Don't build PIC code command="$base_compile $srcfile" else - command="$base_compile $srcfile $pic_flag" + # All platforms use -DPIC, to notify preprocessed assembler code. + command="$base_compile $srcfile $pic_flag -DPIC" fi if test "$compiler_c_o" = yes; then command="$command -o $obj" + output_obj="$obj" fi # Suppress compiler output if we already did a PIC compilation. command="$command$suppress_output" - $run $rm "$obj" "$output_obj" + $run $rm "$output_obj" $show "$command" if $run eval "$command"; then : else @@ -751,7 +695,7 @@ compiler." fi # Just move the object if needed - if test -n "$output_obj" && test "x$output_obj" != "x$obj"; then + if test x"$output_obj" != x"$obj"; then $show "$mv $output_obj $obj" if $run $mv $output_obj $obj; then : else @@ -761,25 +705,23 @@ compiler." fi fi - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <<EOF -# Name of the non-PIC object. -non_pic_object='$objname' - -EOF - else - # Append the name of the non-PIC object the libtool object file. - # Only append if the libtool object file exists. - test -z "$run" && cat >> ${libobj}T <<EOF -# Name of the non-PIC object. -non_pic_object=none - -EOF + # Create an invalid libtool object if no PIC, so that we do not + # accidentally link it into a program. + if test "$build_libtool_libs" != yes; then + $show "echo timestamp > $libobj" + $run eval "echo timestamp > \$libobj" || exit $? + else + # Move the .lo from within objdir + $show "$mv $libobj $lo_libobj" + if $run $mv $libobj $lo_libobj; then : + else + error=$? + $run $rm $removelist + exit $error + fi + fi fi - $run $mv "${libobj}T" "${libobj}" - # Unlock the critical section if it was locked if test "$need_locks" != no; then $run $rm "$lockfile" @@ -811,7 +753,6 @@ EOF ;; esac libtool_args="$nonopt" - base_compile="$nonopt" compile_command="$nonopt" finalize_command="$nonopt" @@ -841,7 +782,6 @@ EOF module=no no_install=no objs= - non_pic_objects= prefer_static_libs=no preload=no prev= @@ -885,7 +825,6 @@ EOF # Go through the arguments, transforming them on the way. while test $# -gt 0; do arg="$1" - base_compile="$base_compile $arg" shift case $arg in *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") @@ -964,113 +903,6 @@ EOF prev= continue ;; - objectlist) - if test -f "$arg"; then - save_arg=$arg - moreargs= - for fil in `cat $save_arg` - do -# moreargs="$moreargs $fil" - arg=$fil - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit 1 - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit 1 - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi - fi - done - else - $echo "$modename: link input file \`$save_arg' does not exist" - exit 1 - fi - arg=$save_arg - prev= - continue - ;; rpath | xrpath) # We need an absolute path. case $arg in @@ -1171,7 +1003,7 @@ EOF # so, if we see these flags be careful not to treat them like -L -L[A-Z][A-Z]*:*) case $with_gcc/$host in - no/*-*-irix*) + no/*-*-irix* | no/*-*-nonstopux*) compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" ;; @@ -1222,24 +1054,19 @@ EOF # These systems don't actually have a C library (as such) test "X$arg" = "X-lc" && continue ;; - *-*-openbsd*) - # OpenBSD uses either libc or libc_r. - continue + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue ;; - *-*-rhapsody* | *-*-darwin1.[012]) - # Rhapsody C and math libraries are in the System framework - deplibs="$deplibs -framework System" + esac + elif test "X$arg" = "X-lc_r"; then + case $host in + *-*-openbsd* | *-*-freebsd*) + # Do not include libc_r directly, use -pthread flag. continue + ;; esac fi - if test "X$arg" = "X-lc_r"; then - case $host in - *-*-openbsd*) - # Do not include libc_r directly, use -pthread flag. - continue - ;; - esac - fi deplibs="$deplibs $arg" continue ;; @@ -1273,11 +1100,6 @@ EOF continue ;; - -objectlist) - prev=objectlist - continue - ;; - -o) prev=output ;; -release) @@ -1334,7 +1156,7 @@ EOF -Wc,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` arg= - IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in @@ -1352,7 +1174,7 @@ EOF -Wl,*) args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wl,//'` arg= - IFS="${IFS= }"; save_ifs="$IFS"; IFS=',' + save_ifs="$IFS"; IFS=',' for flag in $args; do IFS="$save_ifs" case $flag in @@ -1390,101 +1212,29 @@ EOF esac ;; - *.$objext) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A libtool-controlled object. - - # Check to see that this really is a libtool object. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - pic_object= - non_pic_object= - - # Read the .lo file - # If there is no directory component, then add one. - case $arg in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - if test -z "$pic_object" || \ - test -z "$non_pic_object" || - test "$pic_object" = none && \ - test "$non_pic_object" = none; then - $echo "$modename: cannot find name of object for \`$arg'" 1>&2 - exit 1 - fi - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" + *.lo | *.$objext) + # A library or standard object. + if test "$prev" = dlfiles; then + # This file was specified with -dlopen. + if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then + dlfiles="$dlfiles $arg" + prev= + continue + else + # If libtool objects are unsupported, then we need to preload. + prev=dlprefiles fi + fi - if test "$pic_object" != none; then - # Prepend the subdirectory the object is found in. - pic_object="$xdir$pic_object" - - if test "$prev" = dlfiles; then - if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then - dlfiles="$dlfiles $pic_object" - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - # CHECK ME: I think I busted this. -Ossama - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles $pic_object" - prev= - fi - - # A PIC object. - libobjs="$libobjs $pic_object" - arg="$pic_object" - fi - - # Non-PIC object. - if test "$non_pic_object" != none; then - # Prepend the subdirectory the object is found in. - non_pic_object="$xdir$non_pic_object" - - # A standard non-PIC object - non_pic_objects="$non_pic_objects $non_pic_object" - if test -z "$pic_object" || test "$pic_object" = none ; then - arg="$non_pic_object" - fi - fi - else - # Only an error if not doing a dry-run. - if test -z "$run"; then - $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 - exit 1 - else - # Dry-run case. - - # Extract subdirectory from the argument. - xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$arg"; then - xdir= - else - xdir="$xdir/" - fi - - pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` - non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` - libobjs="$libobjs $pic_object" - non_pic_objects="$non_pic_objects $non_pic_object" - fi + if test "$prev" = dlprefiles; then + # Preload the old-style object. + dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` + prev= + else + case $arg in + *.lo) libobjs="$libobjs $arg" ;; + *) objs="$objs $arg" ;; + esac fi ;; @@ -1538,57 +1288,12 @@ EOF exit 1 fi - # Infer tagged configuration to use if any are available and - # if one wasn't chosen via the "--tag" command line option. - # Only attempt this if the compiler in the base link - # command doesn't match the default compiler. - if test -n "$available_tags" && test -z "$tagname"; then - case $base_compile in - "$CC "*) ;; - # Blanks in the command may have been stripped by the calling shell, - # but not from the CC environment variable when ltconfig was run. - "`$echo $CC` "*) ;; - *) - for z in $available_tags; do - if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$0" > /dev/null; then - # Evaluate the configuration. - eval "`sed -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $0`" - case $base_compile in - "$CC "*) - # The compiler in $compile_command matches - # the one in the tagged configuration. - # Assume this is the tagged configuration we want. - tagname=$z - break - ;; - "`$echo $CC` "*) - tagname=$z - break - ;; - esac - fi - done - # If $tagname still isn't set, then no tagged configuration - # was found and let the user know that the "--tag" command - # line option must be used. - if test -z "$tagname"; then - echo "$modename: unable to infer tagged configuration" - echo "$modename: specify a tag with \`--tag'" 1>&2 - exit 1 -# else -# echo "$modename: using $tagname tagged configuration" - fi - ;; - esac - fi - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then eval arg=\"$export_dynamic_flag_spec\" compile_command="$compile_command $arg" finalize_command="$finalize_command $arg" fi - oldlibs= # calculate the name of the file, without its directory outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` libobjs_save="$libobjs" @@ -1636,28 +1341,13 @@ EOF # Find all interdependent deplibs by searching for libraries # that are linked more than once (e.g. -la -lb -la) for deplib in $deplibs; do - case "$libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi libs="$libs $deplib" done - - if test $linkmode = lib; then - libs="$predeps $libs $compiler_lib_search_path $postdeps" - - # Compute libraries that are listed more than once in $predeps - # $postdeps and mark them as special (i.e., whose duplicates are - # not to be eliminated). - pre_post_deps= - for pre_post_dep in $predeps $postdeps; do - case "$pre_post_deps " in - *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; - esac - pre_post_deps="$pre_post_deps $pre_post_dep" - done - pre_post_deps= - fi - deplibs= newdependency_libs= newlib_search_path= @@ -1689,30 +1379,25 @@ EOF ;; esac for pass in $passes; do - if test "$linkmode,$pass" = "lib,link" || - test "$linkmode,$pass" = "prog,scan"; then - libs="$deplibs" - deplibs= - fi if test $linkmode = prog; then + # Determine which files to process case $pass in - dlopen) libs="$dlfiles" ;; + dlopen) + libs="$dlfiles" + save_deplibs="$deplibs" # Collect dlpreopened libraries + deplibs= + ;; dlpreopen) libs="$dlprefiles" ;; link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; esac fi - if test $pass = dlopen; then - # Collect dlpreopened libraries - save_deplibs="$deplibs" - deplibs= - fi for deplib in $libs; do lib= found=no case $deplib in -l*) - if test $linkmode != lib && test $linkmode != prog; then - $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + if test $linkmode = oldlib && test $linkmode = obj; then + $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 continue fi if test $pass = conv; then @@ -1762,7 +1447,7 @@ EOF fi ;; *) - $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 ;; esac # linkmode continue @@ -1789,10 +1474,12 @@ EOF lib) if test "$deplibs_check_method" != pass_all; then echo - echo "*** Warning: This library needs some functionality provided by $deplib." + echo "*** Warning: Trying to link with static lib archive $deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + echo "*** shared version of the library, which you do not appear to have" + echo "*** because the file extensions .$libext of this argument makes me believe" + echo "*** that it is just a static archive that I should not used here." else echo echo "*** Warning: Linking the shared library $output against the" @@ -1813,18 +1500,14 @@ EOF esac # linkmode ;; # *.$libext *.lo | *.$objext) - if test $pass = conv; then - deplibs="$deplib $deplibs" - elif test $linkmode = prog; then - if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then - # If there is no dlopen support or we're linking statically, - # we need to preload. - newdlprefiles="$newdlprefiles $deplib" - compile_deplibs="$deplib $compile_deplibs" - finalize_deplibs="$deplib $finalize_deplibs" - else - newdlfiles="$newdlfiles $deplib" - fi + if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then + # If there is no dlopen support or we're linking statically, + # we need to preload. + newdlprefiles="$newdlprefiles $deplib" + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + else + newdlfiles="$newdlfiles $deplib" fi continue ;; @@ -1840,7 +1523,7 @@ EOF fi # Check to see that this really is a libtool archive. - if (sed -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 @@ -1867,7 +1550,8 @@ EOF if test "$linkmode,$pass" = "lib,link" || test "$linkmode,$pass" = "prog,scan" || - { test $linkmode != prog && test $linkmode != lib; }; then + { test $linkmode = oldlib && test $linkmode = obj; }; then + # Add dl[pre]opened files of deplib test -n "$dlopen" && dlfiles="$dlfiles $dlopen" test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" fi @@ -1886,9 +1570,11 @@ EOF tmp_libs= for deplib in $dependency_libs; do deplibs="$deplib $deplibs" - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done elif test $linkmode != prog && test $linkmode != lib; then @@ -1916,10 +1602,8 @@ EOF fi if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then # If there is no dlname, no dlopen support or we're linking - # statically, we need to preload. We also need to preload any - # dependent libraries so libltdl's deplib preloader doesn't - # bomb out in the load deplibs phase. - dlprefiles="$dlprefiles $lib $dependency_libs" + # statically, we need to preload. + dlprefiles="$dlprefiles $lib" else newdlfiles="$newdlfiles $lib" fi @@ -1985,7 +1669,7 @@ EOF compile_deplibs="$dir/$old_library $compile_deplibs" finalize_deplibs="$dir/$old_library $finalize_deplibs" else - deplibs="$lib $deplibs" # used for prog,scan pass + deplibs="$lib $deplibs" fi continue fi @@ -2013,27 +1697,23 @@ EOF # or/and link against static libraries newdependency_libs="$deplib $newdependency_libs" fi - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done # for deplib continue fi # $linkmode = prog... - if test "$linkmode,$pass" = "prog,link"; then - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - # We need to hardcode the library path - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *" $absdir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi + link_static=no # Whether the deplib will be linked statically + if test -n "$library_names" && + { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + # Link against this shared library + if test "$linkmode,$pass" = "prog,link" || + { test $linkmode = lib && test $hardcode_into_libs = yes; }; then # Hardcode the library path. # Skip directories that are in the system default run-time # search path. @@ -2055,6 +1735,17 @@ EOF esac ;; esac + if test $linkmode = prog; then + # We need to hardcode the library path + if test -n "$shlibpath_var"; then + # Make sure the rpath contains only unique directories. + case "$temp_rpath " in + *" $dir "*) ;; + *" $absdir "*) ;; + *) temp_rpath="$temp_rpath $dir" ;; + esac + fi + fi fi # $linkmode,$pass = prog,link... if test "$alldeplibs" = yes && @@ -2064,40 +1755,11 @@ EOF # We only need to search for static libraries continue fi - fi - - link_static=no # Whether the deplib will be linked statically - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then notinst_deplibs="$notinst_deplibs $lib" need_relink=yes fi - # This is a shared library - if test $linkmode = lib && - test $hardcode_into_libs = yes; then - # Hardcode the library path. - # Skip directories that are in the system default run-time - # search path. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - fi if test -n "$old_archive_from_expsyms_cmds"; then # figure out the soname @@ -2123,14 +1785,14 @@ EOF # Make a new name for the extract_expsyms_cmds to use soroot="$soname" - soname=`echo $soroot | sed -e 's/^.*\///'` - newlib="libimp-`echo $soname | sed 's/^lib//;s/\.dll$//'`.a" + soname=`echo $soroot | ${SED} -e 's/^.*\///'` + newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" # If the library has no export list, then create one now if test -f "$output_objdir/$soname-def"; then : else $show "extracting exported symbol list from \`$soname'" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' eval cmds=\"$extract_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" @@ -2143,7 +1805,7 @@ EOF # Create $newlib if test -f "$output_objdir/$newlib"; then :; else $show "generating import library for \`$soname'" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' eval cmds=\"$old_archive_from_expsyms_cmds\" for cmd in $cmds; do IFS="$save_ifs" @@ -2254,6 +1916,15 @@ EOF fi fi elif test $linkmode = prog; then + if test "$alldeplibs" = yes && + { test "$deplibs_check_method" = pass_all || + { test "$build_libtool_libs" = yes && + test -n "$library_names"; }; }; then + # We only need to search for static libraries + continue + fi + + # Try to link the static library # Here we assume that one of hardcode_direct or hardcode_minus_L # is not unsupported. This is valid on all known static and # shared platforms. @@ -2274,25 +1945,26 @@ EOF # Just print a warning and add the library to dependency_libs so # that the program can be linked against the static library. echo - echo "*** Warning: This library needs some functionality provided by $lib." + echo "*** Warning: This system can not link to static lib archive $lib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" echo "*** shared version of the library, which you do not appear to have." if test "$module" = yes; then - echo "*** Therefore, libtool will create a static module, that should work " - echo "*** as long as the dlopening application is linked with the -dlopen flag." + echo "*** But as you try to build a module library, libtool will still create " + echo "*** a static module, that should work as long as the dlopening application" + echo "*** is linked with the -dlopen flag to resolve symbols at runtime." if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." + echo + echo "*** However, this would only work if libtool was able to extract symbol" + echo "*** lists from a program, using \`nm' or equivalent, but libtool could" + echo "*** not find such a program. So, this module is probably useless." + echo "*** \`nm' from GNU binutils and a full rebuild may help." fi if test "$build_old_libs" = no; then - build_libtool_libs=module - build_old_libs=yes + build_libtool_libs=module + build_old_libs=yes else - build_libtool_libs=no + build_libtool_libs=no fi fi else @@ -2329,9 +2001,11 @@ EOF tmp_libs= for deplib in $dependency_libs; do newdependency_libs="$deplib $newdependency_libs" - case "$tmp_libs " in - *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; - esac + if test "X$duplicate_deps" = "Xyes" ; then + case "$tmp_libs " in + *" $deplib "*) specialdeplibs="$specialdeplibs $deplib" ;; + esac + fi tmp_libs="$tmp_libs $deplib" done @@ -2357,7 +2031,7 @@ EOF if grep "^installed=no" $deplib > /dev/null; then path="-L$absdir/$objdir" else - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 @@ -2378,7 +2052,6 @@ EOF fi # link_all_deplibs != no fi # linkmode = lib done # for deplib in $libs - dependency_libs="$newdependency_libs" if test $pass = dlpreopen; then # Link the dlpreopened libraries before other libraries for deplib in $save_deplibs; do @@ -2386,6 +2059,7 @@ EOF done fi if test $pass != dlopen; then + test $pass != scan && dependency_libs="$newdependency_libs" if test $pass != conv; then # Make sure lib_search_path contains only unique directories. lib_search_path= @@ -2408,40 +2082,20 @@ EOF eval tmp_libs=\"\$$var\" new_libs= for deplib in $tmp_libs; do - # FIXME: Pedantically, this is the right thing to do, so - # that some nasty dependency loop isn't accidentally - # broken: - #new_libs="$deplib $new_libs" - # Pragmatically, this seems to cause very few problems in - # practice: case $deplib in - -L*) new_libs="$deplib $new_libs" ;; - *) - # And here is the reason: when a library appears more - # than once as an explicit dependence of a library, or - # is implicitly linked in more than once by the - # compiler, it is considered special, and multiple - # occurrences thereof are not removed. Compare this - # with having the same library being listed as a - # dependency of multiple other libraries: in this case, - # we know (pedantically, we assume) the library does not - # need to be listed more than once, so we keep only the - # last copy. This is not always right, but it is rare - # enough that we require users that really mean to play - # such unportable linking tricks to link the library - # using -Wl,-lname, so that libtool does not consider it - # for duplicate removal. - case " $specialdeplibs " in - *" $deplib "*) new_libs="$deplib $new_libs" ;; - *) - case " $new_libs " in - *" $deplib "*) ;; - *) new_libs="$deplib $new_libs" ;; - esac - ;; - esac - ;; - esac + -L*) new_libs="$deplib $new_libs" ;; + *) + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) + case " $new_libs " in + *" $deplib "*) ;; + *) new_libs="$deplib $new_libs" ;; + esac + ;; + esac + ;; + esac done tmp_libs= for deplib in $new_libs; do @@ -2458,6 +2112,11 @@ EOF eval $var=\"$tmp_libs\" done # for var fi + if test "$pass" = "conv" && + { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then + libs="$deplibs" # reset libs + deplibs= + fi done # for pass if test $linkmode = prog; then dlfiles="$newdlfiles" @@ -2466,10 +2125,6 @@ EOF case $linkmode in oldlib) - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 fi @@ -2549,9 +2204,7 @@ EOF if test -z "$rpath"; then if test "$build_libtool_libs" = yes; then # Building a libtool convenience library. - # Some compilers have problems with a `.al' extension so - # convenience libraries should have the same extension an - # archive normally would. + libext=al oldlibs="$output_objdir/$libname.$libext $oldlibs" build_libtool_libs=convenience build_old_libs=yes @@ -2567,7 +2220,7 @@ EOF else # Parse the version information argument. - IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' + save_ifs="$IFS"; IFS=':' set dummy $vinfo 0 0 0 IFS="$save_ifs" @@ -2642,16 +2295,21 @@ EOF versuffix=".$current"; ;; - irix) + irix | nonstopux) major=`expr $current - $age + 1` - verstring="sgi$major.$revision" + + case $version_type in + nonstopux) verstring_prefix=nonstopux ;; + *) verstring_prefix=sgi ;; + esac + verstring="$verstring_prefix$major.$revision" # Add in all the interfaces that we are compatible with. loop=$revision while test $loop != 0; do iface=`expr $revision - $loop` loop=`expr $loop - 1` - verstring="sgi$major.$iface:$verstring" + verstring="$verstring_prefix$major.$iface:$verstring" done # Before this point, $major must not contain `.'. @@ -2704,6 +2362,16 @@ EOF if test -z "$vinfo" && test -n "$release"; then major= verstring="0.0" + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely + verstring="" + ;; + *) + verstring="0.0" + ;; + esac if test "$need_version" = no; then versuffix= else @@ -2732,24 +2400,9 @@ EOF fi if test "$mode" != relink; then - # Remove our outputs, but don't remove object files since they - # may have been created when compiling PIC objects. - removelist= - tempremovelist=`echo "$output_objdir/*"` - for p in $tempremovelist; do - case $p in - *.$objext) - ;; - $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) - removelist="$removelist $p" - ;; - *) ;; - esac - done - if test -n "$removelist"; then - $show "${rm}r $removelist" - $run ${rm}r $removelist - fi + # Remove our outputs. + $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" + $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* fi # Now set the variables for building old libraries. @@ -2762,9 +2415,9 @@ EOF # Eliminate all temporary directories. for path in $notinst_path; do - lib_search_path=`echo "$lib_search_path " | sed -e 's% $path % %g'` - deplibs=`echo "$deplibs " | sed -e 's% -L$path % %g'` - dependency_libs=`echo "$dependency_libs " | sed -e 's% -L$path % %g'` + lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` + deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` + dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` done if test -n "$xrpath"; then @@ -2815,10 +2468,10 @@ EOF *-*-netbsd*) # Don't link with libc until the a.out ld.so is fixed. ;; - *-*-openbsd*) - # OpenBSD uses either libc or libc_r. - ;; - *) + *-*-openbsd* | *-*-freebsd*) + # Do not include libc due to us having libc/libc_r. + ;; + *) # Add libc to deplibs on all other systems if necessary. if test $build_libtool_need_lc = "yes"; then deplibs="$deplibs -lc" @@ -2860,13 +2513,13 @@ EOF int main() { return 0; } EOF $rm conftest - $LTCC -o conftest conftest.c $deplibs + $CC -o conftest conftest.c $deplibs if test $? -eq 0 ; then ldd_output=`ldd conftest` for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" -a "$name" != "0"; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` deplib_matches=`eval \\$echo \"$library_names_spec\"` set dummy $deplib_matches @@ -2876,24 +2529,26 @@ EOF else droppeddeps=yes echo - echo "*** Warning: This library needs some functionality provided by $i." + echo "*** Warning: dynamic linker does not accept needed library $i." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + echo "*** shared version of the library, which I believe you do not have" + echo "*** because a test_compile did reveal that the linker did not use it for" + echo "*** its dynamic dependency list that programs get resolved with at runtime." fi else newdeplibs="$newdeplibs $i" fi done else - # Error occured in the first compile. Let's try to salvage the situation: - # Compile a seperate program for each library. + # Error occured in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. for i in $deplibs; do name="`expr $i : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" -a "$name" != "0"; then + if test -n "$name" && test "$name" != "0"; then $rm conftest - $LTCC -o conftest conftest.c $i + $CC -o conftest conftest.c $i # Did it work? if test $? -eq 0 ; then ldd_output=`ldd conftest` @@ -2906,10 +2561,12 @@ EOF else droppeddeps=yes echo - echo "*** Warning: This library needs some functionality provided by $i." + echo "*** Warning: dynamic linker does not accept needed library $i." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + echo "*** shared version of the library, which you do not appear to have" + echo "*** because a test_compile did reveal that the linker did not use this one" + echo "*** as a dynamic dependency that programs can get resolved with at runtime." fi else droppeddeps=yes @@ -2931,7 +2588,7 @@ EOF for a_deplib in $deplibs; do name="`expr $a_deplib : '-l\(.*\)'`" # If $name is empty we are operating on a -L argument. - if test "$name" != "" -a "$name" != "0"; then + if test -n "$name" && test "$name" != "0"; then libname=`eval \\$echo \"$libname_spec\"` for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` @@ -2948,14 +2605,14 @@ EOF # but so what? potlib="$potent_lib" while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` + potliblink=`ls -ld $potlib | ${SED} 's/.* -> //'` case $potliblink in [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; esac done if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | sed 10q \ + | ${SED} 10q \ | egrep "$file_magic_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" @@ -2966,10 +2623,17 @@ EOF if test -n "$a_deplib" ; then droppeddeps=yes echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + echo "*** with $libname but no candidates were found. (...for file magic test)" + else + echo "*** with $libname and none of the candidates passed a file format test" + echo "*** using a file magic. Last file checked: $potlib" + fi fi else # Add a -L argument. @@ -2988,8 +2652,9 @@ EOF for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do potential_libs=`ls $i/$libname[.-]* 2>/dev/null` for potent_lib in $potential_libs; do + potlib="$potent_lib" # see symlink-check below in file_magic test if eval echo \"$potent_lib\" 2>/dev/null \ - | sed 10q \ + | ${SED} 10q \ | egrep "$match_pattern_regex" > /dev/null; then newdeplibs="$newdeplibs $a_deplib" a_deplib="" @@ -3000,10 +2665,17 @@ EOF if test -n "$a_deplib" ; then droppeddeps=yes echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." + echo "*** Warning: linker path does not have real file for library $a_deplib." echo "*** I have the capability to make that library automatically link in when" echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." + echo "*** shared version of the library, which you do not appear to have" + echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then + echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else + echo "*** with $libname and none of the candidates passed a file format test" + echo "*** using a regex pattern. Last file checked: $potlib" + fi fi else # Add a -L argument. @@ -3159,9 +2831,7 @@ EOF else soname="$realname" fi - if test x$dlname = x; then - dlname=$soname - fi + test -z "$dlname" && dlname=$soname lib="$output_objdir/$realname" for link @@ -3169,6 +2839,23 @@ EOF linknames="$linknames $link" done + # Ensure that we have .o objects for linkers which dislike .lo + # (e.g. aix) in case we are running --disable-static + for obj in $libobjs; do + xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$obj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + if test ! -f $xdir/$oldobj; then + $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" + $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? + fi + done + # Use standard objects if they are pic test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` @@ -3179,7 +2866,7 @@ EOF export_symbols="$output_objdir/$libname.exp" $run $rm $export_symbols eval cmds=\"$export_symbols_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -3201,14 +2888,13 @@ EOF if test -n "$convenience"; then if test -n "$whole_archive_flag_spec"; then - save_libobjs=$libobjs eval libobjs=\"\$libobjs $whole_archive_flag_spec\" else gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" status=$? if test $status -ne 0 && test ! -d "$gentop"; then exit $status @@ -3226,8 +2912,8 @@ EOF $show "${rm}r $xdir" $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" status=$? if test $status -ne 0 && test ! -d "$xdir"; then exit $status @@ -3235,7 +2921,7 @@ EOF $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - libobjs="$libobjs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` done fi fi @@ -3254,118 +2940,26 @@ EOF if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then eval cmds=\"$archive_expsym_cmds\" else + save_deplibs="$deplibs" + for conv in $convenience; do + tmp_deplibs= + for test_deplib in $deplibs; do + if test "$test_deplib" != "$conv"; then + tmp_deplibs="$tmp_deplibs $test_deplib" + fi + done + deplibs="$tmp_deplibs" + done eval cmds=\"$archive_cmds\" + deplibs="$save_deplibs" fi - - if len=`expr "X$cmds" : ".*"` && - test $len -le $max_cmd_len || test $max_cmd_len -le -1; then - : - else - # The command line is too long to link in one step, link piecewise. - $echo "creating reloadable object files..." - - # Save the value of $output and $libobjs because we want to - # use them later. If we have whole_archive_flag_spec, we - # want to use save_libobjs as it was before - # whole_archive_flag_spec was expanded, because we can't - # assume the linker understands whole_archive_flag_spec. - # This may have to be revisited, in case too many - # convenience libraries get linked in and end up exceeding - # the spec. - if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then - save_libobjs=$libobjs - fi - save_output=$output - - # Clear the reloadable object creation command queue and - # initialize k to one. - test_cmds= - concat_cmds= - objlist= - delfiles= - last_robj= - k=1 - output=$output_objdir/$save_output-${k}.$objext - # Loop over the list of objects to be linked. - for obj in $save_libobjs - do - eval test_cmds=\"$reload_cmds $objlist $last_robj\" - if test "X$objlist" = X || - { len=`expr "X$test_cmds" : ".*"` && - test $len -le $max_cmd_len; }; then - objlist="$objlist $obj" - else - # The command $test_cmds is almost too long, add a - # command to the queue. - if test $k -eq 1 ; then - # The first file doesn't have a previous command to add. - eval concat_cmds=\"$reload_cmds $objlist $last_robj\" - else - # All subsequent reloadable object files will link in - # the last one created. - eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" - fi - last_robj=$output_objdir/$save_output-${k}.$objext - k=`expr $k + 1` - output=$output_objdir/$save_output-${k}.$objext - objlist=$obj - len=1 - fi - done - # Handle the remaining objects by creating one last - # reloadable object file. All subsequent reloadable object - # files will link in the last one created. - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" - - # Set up a command to remove the reloadale object files - # after they are used. - i=0 - while test $i -lt $k - do - i=`expr $i + 1` - delfiles="$delfiles $output_objdir/$save_output-${i}.$objext" - done - - $echo "creating a temporary reloadable object file: $output" - - # Loop through the commands generated above and execute them. - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $concat_cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - libobjs=$output - # Restore the value of output. - output=$save_output - - if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - fi - # Expand the library linking commands again to reset the - # value of $libobjs for piecewise linking. - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - - # Append the command to remove the reloadable object files - # to the just-reset $cmds. - eval cmds=\"\$cmds~$rm $delfiles\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" # Restore the uninstalled library and exit if test "$mode" = relink; then @@ -3449,8 +3043,8 @@ EOF gentop="$output_objdir/${obj}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" status=$? if test $status -ne 0 && test ! -d "$gentop"; then exit $status @@ -3468,8 +3062,8 @@ EOF $show "${rm}r $xdir" $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" status=$? if test $status -ne 0 && test ! -d "$xdir"; then exit $status @@ -3477,7 +3071,7 @@ EOF $show "(cd $xdir && $AR x $xabs)" $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - reload_conv_objs="$reload_objs "`find $xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` + reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` done fi fi @@ -3487,7 +3081,7 @@ EOF output="$obj" eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -3513,8 +3107,8 @@ EOF # Create an invalid libtool object if no PIC, so that we don't # accidentally link it into a program. - # $show "echo timestamp > $libobj" - # $run eval "echo timestamp > $libobj" || exit $? + $show "echo timestamp > $libobj" + $run eval "echo timestamp > $libobj" || exit $? exit 0 fi @@ -3523,13 +3117,27 @@ EOF reload_objs="$libobjs $reload_conv_objs" output="$libobj" eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" $run eval "$cmd" || exit $? done IFS="$save_ifs" + else + # Just create a symlink. + $show $rm $libobj + $run $rm $libobj + xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$libobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` + oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` + $show "(cd $xdir && $LN_S $oldobj $baseobj)" + $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? fi if test -n "$gentop"; then @@ -3542,7 +3150,7 @@ EOF prog) case $host in - *cygwin*) output=`echo $output | sed -e 's,.exe$,,;s,$,.exe,'` ;; + *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; esac if test -n "$vinfo"; then $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 @@ -3730,9 +3338,9 @@ extern \"C\" { if test -z "$export_symbols"; then export_symbols="$output_objdir/$output.exp" $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' + $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' else - $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' + $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' $run eval 'mv "$nlist"T "$nlist"' fi @@ -3740,7 +3348,7 @@ extern \"C\" { for arg in $dlprefiles; do $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | sed -e 's%^.*/%%'` + name=`echo "$arg" | ${SED} -e 's%^.*/%%'` $run eval 'echo ": $name " >> "$nlist"' $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" done @@ -3755,7 +3363,13 @@ extern \"C\" { fi # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then + if grep -v "^: " < "$nlist" | + if sort -k 3 </dev/null >/dev/null 2>&1; then + sort -k 3 + else + sort +2 + fi | + uniq > "$nlist"S; then : else grep -v "^: " < "$nlist" > "$nlist"S @@ -3816,18 +3430,18 @@ static const void *lt_preloaded_setup() { *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; esac;; *-*-hpux*) case "$compile_command " in *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag";; + *) pic_flag_for_symtable=" $pic_flag -DPIC";; esac esac # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $LTCC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" + $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? # Clean up the generated files. $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" @@ -3977,7 +3591,7 @@ static const void *lt_preloaded_setup() { relink_command="$var=\"$var_value\"; export $var; $relink_command" fi done - relink_command="cd `pwd`; $relink_command" + relink_command="(cd `pwd`; $relink_command)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` fi @@ -3997,7 +3611,7 @@ static const void *lt_preloaded_setup() { # win32 will think the script is a binary if it has # a .exe suffix, so we strip it off here. case $output in - *.exe) output=`echo $output|sed 's,.exe$,,'` ;; + *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; esac # test for cygwin because mv fails w/o .exe extensions case $host in @@ -4021,7 +3635,7 @@ static const void *lt_preloaded_setup() { # Sed substitution that helps us do robust quoting. It backslashifies # metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' +Xsed="${SED}"' -e 1s/^X//' sed_quote_subst='$sed_quote_subst' # The HP-UX ksh and POSIX shell print the target directory to stdout @@ -4059,7 +3673,7 @@ else test \"x\$thisdir\" = \"x\$file\" && thisdir=. # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$file\" | ${SED} -n 's/.*-> //p'\` while test -n \"\$file\"; do destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` @@ -4072,7 +3686,7 @@ else fi file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` + file=\`ls -ld \"\$thisdir/\$file\" | ${SED} -n 's/.*-> //p'\` done # Try to get the absolute directory name. @@ -4086,7 +3700,7 @@ else progdir=\"\$thisdir/$objdir\" if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ + { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | ${SED} 1q\`; \\ test \"X\$file\" != \"X\$progdir/\$program\"; }; then file=\"\$\$-\$program\" @@ -4103,7 +3717,7 @@ else if test -n \"\$relink_command\"; then if relink_command_output=\`eval \$relink_command 2>&1\`; then : else - $echo \"\$relink_command_output\" >&2 + $echo \"\$relink_command_output\" >&2 $rm \"\$progdir/\$file\" exit 1 fi @@ -4132,7 +3746,7 @@ else $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed + # The second colon is a workaround for a bug in BeOS R4 ${SED} $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` export $shlibpath_var @@ -4208,7 +3822,7 @@ fi\ oldobjs="$libobjs_save" build_libtool_libs=no else - oldobjs="$objs$old_deplibs $non_pic_objects" + oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` fi addlibs="$old_convenience" fi @@ -4217,8 +3831,8 @@ fi\ gentop="$output_objdir/${outputname}x" $show "${rm}r $gentop" $run ${rm}r "$gentop" - $show "$mkdir $gentop" - $run $mkdir "$gentop" + $show "mkdir $gentop" + $run mkdir "$gentop" status=$? if test $status -ne 0 && test ! -d "$gentop"; then exit $status @@ -4237,8 +3851,8 @@ fi\ $show "${rm}r $xdir" $run ${rm}r "$xdir" - $show "$mkdir $xdir" - $run $mkdir "$xdir" + $show "mkdir $xdir" + $run mkdir "$xdir" status=$? if test $status -ne 0 && test ! -d "$xdir"; then exit $status @@ -4254,41 +3868,27 @@ fi\ if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then eval cmds=\"$old_archive_from_new_cmds\" else - eval cmds=\"$old_archive_cmds\" + # Ensure that we have .o objects in place in case we decided + # not to build a shared library, and have fallen back to building + # static libs even though --disable-static was passed! + for oldobj in $oldobjs; do + if test ! -f $oldobj; then + xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` + if test "X$xdir" = "X$oldobj"; then + xdir="." + else + xdir="$xdir" + fi + baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` + obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` + $show "(cd $xdir && ${LN_S} $obj $baseobj)" + $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + fi + done - if len=`expr "X$cmds" : ".*"` && - test $len -le $max_cmd_len || test $max_cmd_len -le -1; then - : - else - # the command line is too long to link in one step, link in parts - $echo "using piecewise archive linking..." - save_RANLIB=$RANLIB - RANLIB=: - objlist= - concat_cmds= - save_oldobjs=$oldobjs - for obj in $save_oldobjs - do - oldobjs="$objlist $obj" - objlist="$objlist $obj" - eval test_cmds=\"$old_archive_cmds\" - if len=`expr "X$test_cmds" : ".*"` && - test $len -le $max_cmd_len; then - : - else - # the above command should be used before it gets too long - oldobjs=$objlist - test -z "$concat_cmds" || concat_cmds=$concat_cmds~ - eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" - objlist= - fi - done - RANLIB=$save_RANLIB - oldobjs=$objlist - eval cmds=\"\$concat_cmds~$old_archive_cmds\" - fi + eval cmds=\"$old_archive_cmds\" fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -4321,7 +3921,7 @@ fi\ fi done # Quote the link command for shipping. - relink_command="cd `pwd`; $SHELL $0 --mode=relink $libtool_args" + relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args)" relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` # Only create the output if not a dry run. @@ -4338,7 +3938,7 @@ fi\ case $deplib in *.la) name=`$echo "X$deplib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` if test -z "$libdir"; then $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 exit 1 @@ -4352,7 +3952,7 @@ fi\ newdlfiles= for lib in $dlfiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 @@ -4363,7 +3963,7 @@ fi\ newdlprefiles= for lib in $dlprefiles; do name=`$echo "X$lib" | $Xsed -e 's%^.*/%%'` - eval libdir=`sed -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` if test -z "$libdir"; then $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 exit 1 @@ -4587,7 +4187,7 @@ relink_command=\"$relink_command\"" *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 @@ -4663,7 +4263,7 @@ relink_command=\"$relink_command\"" # Do each command in the postinstall commands. lib="$destdir/$realname" eval cmds=\"$postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -4736,19 +4336,27 @@ relink_command=\"$relink_command\"" fi # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + case $host in + *cygwin*|*mingw*) + wrapper=`echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac + if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then notinst_deplibs= relink_command= # If there is no directory component, then add one. case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + */* | *\\*) . $wrapper ;; + *) . ./$wrapper ;; esac # Check the variables that should have been set. if test -z "$notinst_deplibs"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 exit 1 fi @@ -4773,8 +4381,8 @@ relink_command=\"$relink_command\"" relink_command= # If there is no directory component, then add one. case $file in - */* | *\\*) . $file ;; - *) . ./$file ;; + */* | *\\*) . $wrapper ;; + *) . ./$wrapper ;; esac outputname= @@ -4813,7 +4421,7 @@ relink_command=\"$relink_command\"" # remove .exe since cygwin /usr/bin/install will append another # one anyways case $install_prog,$host in - */usr/bin/install*,*cygwin*) + /usr/bin/install*,*cygwin*) case $file:$destfile in *.exe:*.exe) # this is ok @@ -4822,7 +4430,7 @@ relink_command=\"$relink_command\"" destfile=$destfile.exe ;; *:*.exe) - destfile=`echo $destfile | sed -e 's,.exe$,,'` + destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` ;; esac ;; @@ -4850,7 +4458,7 @@ relink_command=\"$relink_command\"" # Do each command in the postinstall commands. eval cmds=\"$old_postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -4888,7 +4496,7 @@ relink_command=\"$relink_command\"" if test -n "$finish_cmds"; then # Do each command in the finish commands. eval cmds=\"$finish_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -4907,7 +4515,7 @@ relink_command=\"$relink_command\"" fi # Exit here if they wanted silent mode. - test "$show" = : && exit 0 + test "$show" = ":" && exit 0 echo "----------------------------------------------------------------------" echo "Libraries have been installed in:" @@ -4970,7 +4578,7 @@ relink_command=\"$relink_command\"" case $file in *.la) # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : else $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 $echo "$help" 1>&2 @@ -5041,7 +4649,7 @@ relink_command=\"$relink_command\"" -*) ;; *) # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then # If there is no directory component, then add one. case $file in */* | *\\*) . $file ;; @@ -5073,7 +4681,7 @@ relink_command=\"$relink_command\"" fi # Now prepare to actually exec the command. - exec_cmd='"$cmd"$args' + exec_cmd="\$cmd$args" else # Display what would be done. if test -n "$shlibpath_var"; then @@ -5135,14 +4743,14 @@ relink_command=\"$relink_command\"" # Don't error if the file doesn't exist and rm -f was used. if (test -L "$file") >/dev/null 2>&1 \ - || (test -h "$file") >/dev/null 2>&1 \ + || (test -h "$file") >/dev/null 2>&1 \ || test -f "$file"; then - : + : elif test -d "$file"; then - exit_status=1 + exit_status=1 continue elif test "$rmforce" = yes; then - continue + continue fi rmfiles="$file" @@ -5150,7 +4758,7 @@ relink_command=\"$relink_command\"" case $name in *.la) # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then . $dir/$name # Delete the libtool libraries and symlinks. @@ -5164,7 +4772,7 @@ relink_command=\"$relink_command\"" if test -n "$library_names"; then # Do each command in the postuninstall commands. eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -5179,7 +4787,7 @@ relink_command=\"$relink_command\"" if test -n "$old_library"; then # Do each command in the old_postuninstall commands. eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' + save_ifs="$IFS"; IFS='~' for cmd in $cmds; do IFS="$save_ifs" $show "$cmd" @@ -5196,30 +4804,16 @@ relink_command=\"$relink_command\"" ;; *.lo) - # Possibly a libtool object, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - - # Read the .lo file - . $dir/$name - - # Add PIC object to the list of files to remove. - if test -n "$pic_object" \ - && test "$pic_object" != none; then - rmfiles="$rmfiles $dir/$pic_object" - fi - - # Add non-PIC object to the list of files to remove. - if test -n "$non_pic_object" \ - && test "$non_pic_object" != none; then - rmfiles="$rmfiles $dir/$non_pic_object" - fi + if test "$build_old_libs" = yes; then + oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` + rmfiles="$rmfiles $dir/$oldobj" fi ;; *) # Do a test to see if this is a libtool program. if test $mode = clean && - (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then relink_command= . $dir/$file @@ -5280,7 +4874,6 @@ Provide generalized library-building support services. --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] --quiet same as \`--silent' --silent don't print informational messages - --tag=TAG use configuration variables from tag TAG --version print version information MODE must be one of the following: @@ -5406,7 +4999,6 @@ The following components of LINK-COMMAND are treated specially: -no-install link a not-installable executable -no-undefined declare that a library does not refer to external symbols -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -objectlist FILE Use a list of object files found in FILE to specify objects -release RELEASE specify package release information -rpath LIBDIR the created library will eventually be installed in LIBDIR -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries @@ -5457,26 +5049,6 @@ $echo "Try \`$modename --help' for more information about other modes." exit 0 -# The TAGs below are defined such that we never get into a situation -# in which we disable both kinds of libraries. Given conflicting -# choices, we go for a static library, that is the most portable, -# since we can't tell whether shared libraries were disabled because -# the user asked for that or because the platform doesn't support -# them. This is particularly important on AIX, because we don't -# support having both static and shared libraries enabled at the same -# time on that platform, so we default to a shared-only configuration. -# If a disable-shared tag is given, we'll fallback to a static-only -# configuration. But we'll never go from static-only to shared-only. - -# ### BEGIN LIBTOOL TAG CONFIG: disable-shared -build_libtool_libs=no -build_old_libs=yes -# ### END LIBTOOL TAG CONFIG: disable-shared - -# ### BEGIN LIBTOOL TAG CONFIG: disable-static -build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` -# ### END LIBTOOL TAG CONFIG: disable-static - # Local Variables: # mode:shell-script # sh-indentation:2 |