From 6f656182631c9660e1823d95a7a2d957e22c8573 Mon Sep 17 00:00:00 2001 From: Craig Small Date: Tue, 28 Aug 2001 00:22:39 +0000 Subject: made final change to changelog --- aclocal.m4 | 5370 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++---- 1 file changed, 5055 insertions(+), 315 deletions(-) (limited to 'aclocal.m4') diff --git a/aclocal.m4 b/aclocal.m4 index ee15744..0ed0dae 100644 --- a/aclocal.m4 +++ b/aclocal.m4 @@ -1,4 +1,4 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4 +dnl aclocal.m4 generated automatically by aclocal 1.4-p4 dnl Copyright (C) 1994, 1995-8, 1999 Free Software Foundation, Inc. dnl This file is free software; the Free Software Foundation @@ -125,76 +125,430 @@ for am_file in <<$1>>; do done<<>>dnl>>) changequote([,]))]) +# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- -# serial 40 AC_PROG_LIBTOOL -AC_DEFUN(AC_PROG_LIBTOOL, -[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +# serial 47 AC_PROG_LIBTOOL + +builtin([undefine],[symbols]) -# Save cache, so that ltconfig can load it -AC_CACHE_SAVE +# AC_PROG_LIBTOOL +# --------------- +AC_DEFUN([AC_PROG_LIBTOOL], +[AC_REQUIRE([_AC_PROG_LIBTOOL])dnl +dnl If AC_PROG_CXX has already been expanded, run AC_LIBTOOL_CXX +dnl immediately, otherwise, hook it in at the end of AC_PROG_CXX. + AC_PROVIDE_IFELSE([AC_PROG_CXX], + [AC_LIBTOOL_CXX], + [define([AC_PROG_CXX], defn([AC_PROG_CXX])[AC_LIBTOOL_CXX + ])]) -# Actually configure libtool. ac_aux_dir is where install-sh is found. -CC="$CC" CFLAGS="$CFLAGS" CPPFLAGS="$CPPFLAGS" \ -LD="$LD" LDFLAGS="$LDFLAGS" LIBS="$LIBS" \ -LN_S="$LN_S" NM="$NM" RANLIB="$RANLIB" \ -DLLTOOL="$DLLTOOL" AS="$AS" OBJDUMP="$OBJDUMP" \ -${CONFIG_SHELL-/bin/sh} $ac_aux_dir/ltconfig --no-reexec \ -$libtool_flags --no-verify $ac_aux_dir/ltmain.sh $host \ -|| AC_MSG_ERROR([libtool configure failed]) +dnl Quote A][M_PROG_GCJ so that aclocal doesn't bring it in needlessly. +dnl If either AC_PROG_GCJ or A][M_PROG_GCJ have already been expanded, run +dnl AC_LIBTOOL_GCJ immediately, otherwise, hook it in at the end of both. + AC_PROVIDE_IFELSE([AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ], + [AC_LIBTOOL_GCJ], + [ifdef([AC_PROG_GCJ], + [define([AC_PROG_GCJ], defn([AC_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([A][M_PROG_GCJ], + [define([A][M_PROG_GCJ], defn([A][M_PROG_GCJ])[AC_LIBTOOL_GCJ])]) + ifdef([LT_AC_PROG_GCJ], + [define([LT_AC_PROG_GCJ], + defn([LT_AC_PROG_GCJ])[AC_LIBTOOL_GCJ])])])]) +])])# AC_PROG_LIBTOOL -# Reload cache, that may have been modified by ltconfig -AC_CACHE_LOAD + +# _AC_PROG_LIBTOOL +# ---------------- +AC_DEFUN([_AC_PROG_LIBTOOL], +[AC_REQUIRE([AC_LIBTOOL_SETUP])dnl +AC_BEFORE([$0],[AC_LIBTOOL_CXX])dnl +AC_BEFORE([$0],[AC_LIBTOOL_GCJ])dnl # This can be used to rebuild libtool when needed -LIBTOOL_DEPS="$ac_aux_dir/ltconfig $ac_aux_dir/ltmain.sh" +LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" # Always use our own libtool. LIBTOOL='$(SHELL) $(top_builddir)/libtool' AC_SUBST(LIBTOOL)dnl -# Redirect the config.log output again, so that the ltconfig log is not -# clobbered by the next message. -exec 5>>./config.log -]) +# Prevent multiple expansion +define([AC_PROG_LIBTOOL], []) +])# _AC_PROG_LIBTOOL + -AC_DEFUN(AC_LIBTOOL_SETUP, -[AC_PREREQ(2.13)dnl +# AC_LIBTOOL_SETUP +# ---------------- +AC_DEFUN([AC_LIBTOOL_SETUP], +[AC_PREREQ(2.50)dnl AC_REQUIRE([AC_ENABLE_SHARED])dnl AC_REQUIRE([AC_ENABLE_STATIC])dnl AC_REQUIRE([AC_ENABLE_FAST_INSTALL])dnl AC_REQUIRE([AC_CANONICAL_HOST])dnl AC_REQUIRE([AC_CANONICAL_BUILD])dnl -AC_REQUIRE([AC_PROG_RANLIB])dnl AC_REQUIRE([AC_PROG_CC])dnl AC_REQUIRE([AC_PROG_LD])dnl +AC_REQUIRE([AC_PROG_LD_RELOAD_FLAG])dnl AC_REQUIRE([AC_PROG_NM])dnl AC_REQUIRE([AC_PROG_LN_S])dnl +AC_REQUIRE([AC_DEPLIBS_CHECK_METHOD])dnl +# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! +AC_REQUIRE([AC_OBJEXT])dnl +AC_REQUIRE([AC_EXEEXT])dnl dnl -# Check for any special flags to pass to ltconfig. -libtool_flags="--cache-file=$cache_file" -test "$enable_shared" = no && libtool_flags="$libtool_flags --disable-shared" -test "$enable_static" = no && libtool_flags="$libtool_flags --disable-static" -test "$enable_fast_install" = no && libtool_flags="$libtool_flags --disable-fast-install" -test "$ac_cv_prog_gcc" = yes && libtool_flags="$libtool_flags --with-gcc" -test "$ac_cv_prog_gnu_ld" = yes && libtool_flags="$libtool_flags --with-gnu-ld" -ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], -[libtool_flags="$libtool_flags --enable-dlopen"]) +AC_LIBTOOL_SYS_MAX_CMD_LEN +AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +AC_LIBTOOL_OBJDIR + +AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +_LT_AC_PROG_ECHO_BACKSLASH + +case $host_os in +aix3*) + # AIX sometimes has problems with the GCC collect2 program. For some + # reason, if we set the COLLECT_NAMES environment variable, the problems + # vanish in a puff of smoke. + if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES + fi + ;; +esac + +# Sed substitution that helps us do robust quoting. It backslashifies +# metacharacters that are still active within double-quoted strings. +Xsed='sed -e s/^X//' +[sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + +# Same as above, but do not quote variable references. +[double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g'] + +# Sed substitution to delay expansion of an escaped shell variable in a +# double_quote_subst'ed string. +delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' + +# Sed substitution to avoid accidental globbing in evaled expressions +no_glob_subst='s/\*/\\\*/g' + +# Constants: +rm="rm -f" + +# Global variables: +default_ofile=libtool +can_build_shared=yes + +# All known linkers require a `.a' archive for static linking (except M$VC, +# which needs '.lib'). +libext=a +ltmain="$ac_aux_dir/ltmain.sh" +ofile="$default_ofile" +with_gnu_ld="$lt_cv_prog_gnu_ld" + +AC_CHECK_TOOL(RANLIB, ranlib, :) +AC_CHECK_TOOL(STRIP, strip, :) + +old_CC="$CC" +old_CFLAGS="$CFLAGS" + +# Set sane defaults for various variables +test -z "$AR" && AR=ar +test -z "$AR_FLAGS" && AR_FLAGS=cru +test -z "$AS" && AS=as +test -z "$CC" && CC=cc +test -z "$LTCC" && LTCC=$CC +test -z "$DLLTOOL" && DLLTOOL=dlltool +test -z "$LD" && LD=ld +test -z "$LN_S" && LN_S="ln -s" +test -z "$MAGIC_CMD" && MAGIC_CMD=file +test -z "$NM" && NM=nm +test -z "$OBJDUMP" && OBJDUMP=objdump +test -z "$RANLIB" && RANLIB=: +test -z "$STRIP" && STRIP=: +test -z "$ac_objext" && ac_objext=o + +# Determine commands to create old-style static archives. +old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +old_postinstall_cmds='chmod 644 $oldlib' +old_postuninstall_cmds= + +if test -n "$RANLIB"; then + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" +fi + +# Only perform the check for file, if the check method requires it +case $deplibs_check_method in +file_magic*) + if test "$file_magic_cmd" = '$MAGIC_CMD'; then + AC_PATH_MAGIC + fi + ;; +esac + +ifdef([AC_PROVIDE_AC_LIBTOOL_DLOPEN], enable_dlopen=yes, enable_dlopen=no) ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[libtool_flags="$libtool_flags --enable-win32-dll"]) -AC_ARG_ENABLE(libtool-lock, - [ --disable-libtool-lock avoid locking (might break parallel builds)]) -test "x$enable_libtool_lock" = xno && libtool_flags="$libtool_flags --disable-lock" -test x"$silent" = xyes && libtool_flags="$libtool_flags --silent" +enable_win32_dll=yes, enable_win32_dll=no) + +AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes + +AC_ARG_WITH([pic], + [AC_HELP_STRING([--with-pic], + [try to use only PIC/non-PIC objects @<:@default=use both@:>@])], + [pic_mode="$withval"], + [pic_mode=default]) +test -z "$pic_mode" && pic_mode=default + +# Use C for the default configuration in the libtool script +tagname= +AC_LIBTOOL_LANG_C_CONFIG +_LT_AC_TAGCONFIG +])# AC_LIBTOOL_SETUP + + +# _LT_AC_SYS_COMPILER +# ------------------- +AC_DEFUN([_LT_AC_SYS_COMPILER], +[AC_REQUIRE([AC_PROG_CC])dnl + +# If no C compiler was specified, use CC. +LTCC=${LTCC-"$CC"} + +# Allow CC to be a program name with arguments. +set dummy $CC +compiler="[$]2" +])# _LT_AC_SYS_COMPILER + + +# _LT_AC_SYS_LIBPATH_AIX +# ---------------------- +# Links a minimal program and checks the executable +# for the system default hardcoded library path. In most cases, +# this is /usr/lib:/lib, but when the MPI compilers are used +# the location of the communication and MPI libs are included too. +# If we don't find anything, use the default library path according +# to the aix ld manual. +AC_DEFUN([_LT_AC_SYS_LIBPATH_AIX], +[AC_LINK_IFELSE(AC_LANG_PROGRAM,[ +aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | ${AWK-awk} '/Import File Strings/ { getline; getline; if ($[2] ~ /^\//) print $[2] }'` +# Check for a 64-bit object if we didn't find anything. +if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | ${AWK-awk} '/Import File Strings/ { getline; getline; if ($[2] ~ /^\//) print $[2] }'`; fi],[]) +if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi +])# _LT_AC_SYS_LIBPATH_AIX + + +# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR +# --------------------------------- +AC_DEFUN([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR], +[# Find the correct PATH separator. Usually this is `:', but +# DJGPP uses `;' like DOS. +if test "X${PATH_SEPARATOR+set}" != Xset; then + UNAME=${UNAME-`uname 2>/dev/null`} + case X$UNAME in + *-DOS) PATH_SEPARATOR=';' ;; + *) PATH_SEPARATOR=':' ;; + esac +fi +])# _LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + + +# _LT_AC_PROG_ECHO_BACKSLASH +# -------------------------- +# Add some code to the start of the generated configure script which +# will find an echo command which doesn't interpret backslashes. +AC_DEFUN([_LT_AC_PROG_ECHO_BACKSLASH], +[ifdef([AC_DIVERSION_NOTICE], [AC_DIVERT_PUSH(AC_DIVERSION_NOTICE)], + [AC_DIVERT_PUSH(NOTICE)]) +_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR + +# Check that we are running under the correct shell. +SHELL=${CONFIG_SHELL-/bin/sh} + +case X$ECHO in +X*--fallback-echo) + # Remove one level of quotation (which was required for Make). + ECHO=`echo "$ECHO" | sed 's,\\\\\[$]\\[$]0,'[$]0','` + ;; +esac + +echo=${ECHO-echo} +if test "X[$]1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. + shift +elif test "X[$]1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then + # Yippee, $echo works! + : +else + # Restart under the correct shell. + exec $SHELL "[$]0" --no-reexec ${1+"[$]@"} +fi + +if test "X[$]1" = X--fallback-echo; then + # used as fallback echo + shift + cat </dev/null && + echo_test_string="`eval $cmd`" && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break + fi + done +fi + +if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + : +else + # The Solaris, AIX, and Digital Unix default echo programs unquote + # backslashes. This makes it impossible to quote backslashes using + # echo "$something" | sed 's/\\/\\\\/g' + # + # So, first we look for a working echo in the user's PATH. + + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR}" + for dir in $PATH /usr/ucb; do + IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$dir/echo" + break + fi + done + IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. + if test "X`(print -r '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`(print -r "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # This shell has a builtin print -r that does the trick. + echo='print -r' + elif (test -f /bin/ksh || test -f /bin/ksh$ac_exeext) && + test "X$CONFIG_SHELL" != X/bin/ksh; then + # If we have ksh, try running configure again with it. + ORIGINAL_CONFIG_SHELL=${CONFIG_SHELL-/bin/sh} + export ORIGINAL_CONFIG_SHELL + CONFIG_SHELL=/bin/ksh + export CONFIG_SHELL + exec $CONFIG_SHELL "[$]0" --no-reexec ${1+"[$]@"} + else + # Try using printf. + echo='printf %s\n' + if test "X`($echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + # Cool, printf works + : + elif echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($ORIGINAL_CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + CONFIG_SHELL=$ORIGINAL_CONFIG_SHELL + export CONFIG_SHELL + SHELL="$CONFIG_SHELL" + export SHELL + echo="$CONFIG_SHELL [$]0 --fallback-echo" + elif echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo '\t') 2>/dev/null` && + test "X$echo_testing_string" = 'X\t' && + echo_testing_string=`($CONFIG_SHELL "[$]0" --fallback-echo "$echo_test_string") 2>/dev/null` && + test "X$echo_testing_string" = "X$echo_test_string"; then + echo="$CONFIG_SHELL [$]0 --fallback-echo" + else + # maybe with a smaller string... + prev=: + + for cmd in 'echo test' 'sed 2q "[$]0"' 'sed 10q "[$]0"' 'sed 20q "[$]0"' 'sed 50q "[$]0"'; do + if (test "X$echo_test_string" = "X`eval $cmd`") 2>/dev/null + then + break + fi + prev="$cmd" + done + + if test "$prev" != 'sed 50q "[$]0"'; then + echo_test_string=`eval $prev` + export echo_test_string + exec ${ORIGINAL_CONFIG_SHELL-${CONFIG_SHELL-/bin/sh}} "[$]0" ${1+"[$]@"} + else + # Oops. We lost completely, so just stick with echo. + echo=echo + fi + fi + fi + fi +fi +fi + +# Copy echo and quote the copy suitably for passing to libtool from +# the Makefile, instead of quoting the original, which is used later. +ECHO=$echo +if test "X$ECHO" = "X$CONFIG_SHELL [$]0 --fallback-echo"; then + ECHO="$CONFIG_SHELL \\\$\[$]0 --fallback-echo" +fi + +AC_SUBST(ECHO) +AC_DIVERT_POP +])# _LT_AC_PROG_ECHO_BACKSLASH + + +# _LT_AC_LOCK +# ----------- +AC_DEFUN([_LT_AC_LOCK], +[AC_ARG_ENABLE([libtool-lock], + [AC_HELP_STRING([--disable-libtool-lock], + [avoid locking (might break parallel builds)])]) +test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes # Some flags need to be propagated to the compiler or linker for good # libtool support. -case "$host" in +case $host in +ia64-*-hpux*) + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then + case `/usr/bin/file conftest.$ac_objext` in + *ELF-32*) + HPUX_IA64_MODE="32" + ;; + *ELF-64*) + HPUX_IA64_MODE="64" + ;; + esac + fi + rm -rf conftest* + ;; *-*-irix6*) # Find out which ABI we are using. echo '[#]line __oline__ "configure"' > conftest.$ac_ext if AC_TRY_EVAL(ac_compile); then - case "`/usr/bin/file conftest.o`" in + case `/usr/bin/file conftest.$ac_objext` in *32-bit*) LD="${LD-ld} -32" ;; @@ -214,320 +568,4706 @@ case "$host" in SAVE_CFLAGS="$CFLAGS" CFLAGS="$CFLAGS -belf" AC_CACHE_CHECK([whether the C compiler needs -belf], lt_cv_cc_needs_belf, - [AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no])]) + [AC_LANG_PUSH(C) + AC_TRY_LINK([],[],[lt_cv_cc_needs_belf=yes],[lt_cv_cc_needs_belf=no]) + AC_LANG_POP]) if test x"$lt_cv_cc_needs_belf" != x"yes"; then # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf CFLAGS="$SAVE_CFLAGS" fi ;; - ifdef([AC_PROVIDE_AC_LIBTOOL_WIN32_DLL], -[*-*-cygwin* | *-*-mingw*) +[*-*-cygwin* | *-*-mingw* | *-*-pw32*) AC_CHECK_TOOL(DLLTOOL, dlltool, false) AC_CHECK_TOOL(AS, as, false) AC_CHECK_TOOL(OBJDUMP, objdump, false) + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one + AC_CACHE_CHECK([if libtool should supply DllMain function], lt_cv_need_dllmain, + [AC_TRY_LINK([], + [extern int __attribute__((__stdcall__)) DllMain(void*, int, void*); + DllMain (0, 0, 0);], + [lt_cv_need_dllmain=no],[lt_cv_need_dllmain=yes])]) + + case $host/$CC in + *-*-cygwin*/gcc*-mno-cygwin*|*-*-mingw*) + # old mingw systems require "-dll" to link a DLL, while more recent ones + # require "-mdll" + SAVE_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -mdll" + AC_CACHE_CHECK([how to link DLLs], lt_cv_cc_dll_switch, + [AC_TRY_LINK([], [], [lt_cv_cc_dll_switch=-mdll],[lt_cv_cc_dll_switch=-dll])]) + CFLAGS="$SAVE_CFLAGS" ;; + *-*-cygwin* | *-*-pw32*) + # cygwin systems need to pass --dll to the linker, and not link + # crt.o which will require a WinMain@16 definition. + lt_cv_cc_dll_switch="-Wl,--dll -nostartfiles" ;; + esac ;; -]) + ]) esac -]) -# AC_LIBTOOL_DLOPEN - enable checks for dlopen support -AC_DEFUN(AC_LIBTOOL_DLOPEN, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])]) +need_locks="$enable_libtool_lock" -# AC_LIBTOOL_WIN32_DLL - declare package support for building win32 dll's -AC_DEFUN(AC_LIBTOOL_WIN32_DLL, [AC_BEFORE([$0], [AC_LIBTOOL_SETUP])]) - -# AC_ENABLE_SHARED - implement the --enable-shared flag -# Usage: AC_ENABLE_SHARED[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_SHARED, [dnl -define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(shared, -changequote(<<, >>)dnl -<< --enable-shared[=PKGS] build shared libraries [default=>>AC_ENABLE_SHARED_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_shared=yes ;; -no) enable_shared=no ;; -*) - enable_shared=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_shared=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_shared=AC_ENABLE_SHARED_DEFAULT)dnl -]) +])# _LT_AC_LOCK -# AC_DISABLE_SHARED - set the default shared flag to --disable-shared -AC_DEFUN(AC_DISABLE_SHARED, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_SHARED(no)]) -# AC_ENABLE_STATIC - implement the --enable-static flag -# Usage: AC_ENABLE_STATIC[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_STATIC, [dnl -define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(static, -changequote(<<, >>)dnl -<< --enable-static[=PKGS] build static libraries [default=>>AC_ENABLE_STATIC_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_static=yes ;; -no) enable_static=no ;; -*) - enable_static=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_static=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_static=AC_ENABLE_STATIC_DEFAULT)dnl +# AC_LIBTOOL_COMPILER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [OUTPUT-FILE], [ACTION-SUCCESS], [ACTION-FAILURE]) +# ---------------------------------------------------------------- +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_COMPILER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + ifelse([$4], , [ac_outfile=conftest.$ac_objext], [ac_outfile=$4]) + save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS $3" + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + if (eval $ac_compile 2>conftest.err) && test -s $ac_outfile; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + CFLAGS="$save_CFLAGS" ]) -# AC_DISABLE_STATIC - set the default static flag to --disable-static -AC_DEFUN(AC_DISABLE_STATIC, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_STATIC(no)]) +if test x"[$]$2" = xyes; then + ifelse([$5], , :, [$5]) +else + ifelse([$6], , :, [$6]) +fi +])# AC_LIBTOOL_COMPILER_OPTION -# AC_ENABLE_FAST_INSTALL - implement the --enable-fast-install flag -# Usage: AC_ENABLE_FAST_INSTALL[(DEFAULT)] -# Where DEFAULT is either `yes' or `no'. If omitted, it defaults to -# `yes'. -AC_DEFUN(AC_ENABLE_FAST_INSTALL, [dnl -define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl -AC_ARG_ENABLE(fast-install, -changequote(<<, >>)dnl -<< --enable-fast-install[=PKGS] optimize for fast installation [default=>>AC_ENABLE_FAST_INSTALL_DEFAULT], -changequote([, ])dnl -[p=${PACKAGE-default} -case "$enableval" in -yes) enable_fast_install=yes ;; -no) enable_fast_install=no ;; -*) - enable_fast_install=no - # Look at the argument we got. We use all the common list separators. - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," - for pkg in $enableval; do - if test "X$pkg" = "X$p"; then - enable_fast_install=yes - fi - done - IFS="$ac_save_ifs" - ;; -esac], -enable_fast_install=AC_ENABLE_FAST_INSTALL_DEFAULT)dnl +# AC_LIBTOOL_LINKER_OPTION(MESSAGE, VARIABLE-NAME, FLAGS, +# [ACTION-SUCCESS], [ACTION-FAILURE]) +# ------------------------------------------------------------ +# Check whether the given compiler option works +AC_DEFUN([AC_LIBTOOL_LINKER_OPTION], +[AC_CACHE_CHECK([$1], [$2], + [$2=no + save_LDFLAGS="$LDFLAGS" + LDFLAGS="$LDFLAGS $3" + echo "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD + else + $2=yes + fi + fi + $rm conftest* + LDFLAGS="$save_LDFLAGS" ]) -# AC_ENABLE_FAST_INSTALL - set the default to --disable-fast-install -AC_DEFUN(AC_DISABLE_FAST_INSTALL, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl -AC_ENABLE_FAST_INSTALL(no)]) +if test x"[$]$2" = xyes; then + ifelse([$4], , :, [$4]) +else + ifelse([$5], , :, [$5]) +fi +])# AC_LIBTOOL_LINKER_OPTION -# AC_PROG_LD - find the path to the GNU or non-GNU linker -AC_DEFUN(AC_PROG_LD, -[AC_ARG_WITH(gnu-ld, -[ --with-gnu-ld assume the C compiler uses GNU ld [default=no]], -test "$withval" = no || with_gnu_ld=yes, with_gnu_ld=no) -AC_REQUIRE([AC_PROG_CC])dnl -AC_REQUIRE([AC_CANONICAL_HOST])dnl -AC_REQUIRE([AC_CANONICAL_BUILD])dnl -ac_prog=ld -if test "$ac_cv_prog_gcc" = yes; then - # Check if gcc -print-prog-name=ld gives a path. - AC_MSG_CHECKING([for ld used by GCC]) - ac_prog=`($CC -print-prog-name=ld) 2>&5` - case "$ac_prog" in - # Accept absolute paths. -changequote(,)dnl - [\\/]* | [A-Za-z]:[\\/]*) - re_direlt='/[^/][^/]*/\.\./' -changequote([,])dnl - # Canonicalize the path of ld - ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` - while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do - ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` - done - test -z "$LD" && LD="$ac_prog" - ;; - "") - # If it fails, then pretend we aren't using GCC. - ac_prog=ld + +# AC_LIBTOOL_SYS_MAX_CMD_LEN +# -------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_MAX_CMD_LEN], +[# find the maximum length of command line arguments +AC_MSG_CHECKING([the maximum length of command line arguments]) +AC_CACHE_VAL([lt_cv_sys_max_cmd_len], [dnl + i=0 + testring="ABCD" + + case $host_os in + msdosdjgpp*) + # On DJGPP, this test can blow up pretty badly due to problems in libc + # (any single argument exceeding 2000 bytes causes a buffer overrun + # during glob expansion). Even if it were fixed, the result of this + # check would be larger than it should be. + lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + + gnu*) + # Under GNU Hurd, this test is not required because there is + # no limit to the length of command line arguments. + # Libtool will interpret -1 as no limit whatsoever + lt_cv_sys_max_cmd_len=-1; ;; + *) - # If it is relative, then search for the first ld in PATH. - with_gnu_ld=unknown + # If test is not a shell built-in, we'll probably end up computing a + # maximum length that is only half of the actual maximum length, but + # we can't tell. + while test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$testring" 2>/dev/null` \ + = "XX$testring" && + new_result=`expr "X$testring" : ".*" 2>&1` && + lt_cv_sys_max_cmd_len=$new_result && + test $i != 17 # 1/2 MB should be enough + do + i=`expr $i + 1` + testring=$testring$testring + done + testring= + # add a significant safety factor because C++ compilers can tack on massive + # amounts of additional arguments before passing them to the linker. 1/4 + # should be good. + len=`expr $lt_cv_sys_max_cmd_len \/ 4` + lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len - $len` ;; esac -elif test "$with_gnu_ld" = yes; then - AC_MSG_CHECKING([for GNU ld]) +]) +if test -n $lt_cv_sys_max_cmd_len ; then + AC_MSG_RESULT($lt_cv_sys_max_cmd_len) else - AC_MSG_CHECKING([for non-GNU ld]) + AC_MSG_RESULT(none) fi -AC_CACHE_VAL(ac_cv_path_LD, -[if test -z "$LD"; then - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH; do - test -z "$ac_dir" && ac_dir=. - if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then - ac_cv_path_LD="$ac_dir/$ac_prog" - # Check to see if the program is GNU ld. I'd rather use --version, - # but apparently some GNU ld's only accept -v. - # Break only if it was the GNU/non-GNU ld that we prefer. - if "$ac_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then - test "$with_gnu_ld" != no && break - else - test "$with_gnu_ld" != yes && break - fi - fi - done - IFS="$ac_save_ifs" -else - ac_cv_path_LD="$LD" # Let the user override the test with a path. -fi]) -LD="$ac_cv_path_LD" -if test -n "$LD"; then - AC_MSG_RESULT($LD) +])# AC_LIBTOOL_SYS_MAX_CMD_LEN + + +# _LT_AC_CHECK_DLFCN +# -------------------- +AC_DEFUN([_LT_AC_CHECK_DLFCN], +[AC_CHECK_HEADERS(dlfcn.h)dnl +])# _LT_AC_CHECK_DLFCN + + +# _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, +# ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +# ------------------------------------------------------------------ +AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "$cross_compiling" = yes; then : + [$4] else - AC_MSG_RESULT(no) + lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 + lt_status=$lt_dlunknown + cat > conftest.$ac_ext < +#endif + +#include + +#ifdef RTLD_GLOBAL +# define LT_DLGLOBAL RTLD_GLOBAL +#else +# ifdef DL_GLOBAL +# define LT_DLGLOBAL DL_GLOBAL +# else +# define LT_DLGLOBAL 0 +# endif +#endif + +/* We may have to define LT_DLLAZY_OR_NOW in the command line if we + find out it does not work in some platform. */ +#ifndef LT_DLLAZY_OR_NOW +# ifdef RTLD_LAZY +# define LT_DLLAZY_OR_NOW RTLD_LAZY +# else +# ifdef DL_LAZY +# define LT_DLLAZY_OR_NOW DL_LAZY +# else +# ifdef RTLD_NOW +# define LT_DLLAZY_OR_NOW RTLD_NOW +# else +# ifdef DL_NOW +# define LT_DLLAZY_OR_NOW DL_NOW +# else +# define LT_DLLAZY_OR_NOW 0 +# endif +# endif +# endif +# endif +#endif + +#ifdef __cplusplus +extern "C" void exit (int); +#endif + +void fnord() { int i=42;} +int main () +{ + void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); + int status = $lt_dlunknown; + + if (self) + { + if (dlsym (self,"fnord")) status = $lt_dlno_uscore; + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } + + exit (status); +}] +EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then + (./conftest; exit; ) 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; + x$lt_unknown|x*) $3 ;; + esac + else : + # compilation failed + $3 + fi fi -test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) -AC_SUBST(LD) -AC_PROG_LD_GNU -]) +rm -fr conftest* +])# _LT_AC_TRY_DLOPEN_SELF -AC_DEFUN(AC_PROG_LD_GNU, -[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], ac_cv_prog_gnu_ld, -[# I'd rather use --version here, but apparently some GNU ld's only accept -v. -if $LD -v 2>&1 &5; then - ac_cv_prog_gnu_ld=yes -else - ac_cv_prog_gnu_ld=no -fi]) -]) -# AC_PROG_NM - find the path to a BSD-compatible name lister -AC_DEFUN(AC_PROG_NM, -[AC_MSG_CHECKING([for BSD-compatible nm]) -AC_CACHE_VAL(ac_cv_path_NM, -[if test -n "$NM"; then - # Let the user override the test. - ac_cv_path_NM="$NM" +# AC_LIBTOOL_DLOPEN_SELF +# ------------------- +AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], +[AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl +if test "x$enable_dlopen" != xyes; then + enable_dlopen=unknown + enable_dlopen_self=unknown + enable_dlopen_self_static=unknown else - IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" - for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do - test -z "$ac_dir" && ac_dir=. - if test -f $ac_dir/nm || test -f $ac_dir/nm$ac_exeext ; then - # Check to see if the nm accepts a BSD-compat flag. - # Adding the `sed 1q' prevents false positives on HP-UX, which says: - # nm: unknown option "B" ignored - if ($ac_dir/nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -B" - break - elif ($ac_dir/nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then - ac_cv_path_NM="$ac_dir/nm -p" - break - else - ac_cv_path_NM=${ac_cv_path_NM="$ac_dir/nm"} # keep the first match, but - continue # so that we can try to find one that supports BSD flags - fi - fi - done - IFS="$ac_save_ifs" - test -z "$ac_cv_path_NM" && ac_cv_path_NM=nm -fi]) -NM="$ac_cv_path_NM" -AC_MSG_RESULT([$NM]) -AC_SUBST(NM) -]) + lt_cv_dlopen=no + lt_cv_dlopen_libs= -# AC_CHECK_LIBM - check for math library -AC_DEFUN(AC_CHECK_LIBM, -[AC_REQUIRE([AC_CANONICAL_HOST])dnl -LIBM= -case "$host" in -*-*-beos* | *-*-cygwin*) - # These system don't have libm - ;; -*-ncr-sysv4.3*) - AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") - AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") - ;; -*) - AC_CHECK_LIB(m, main, LIBM="-lm") - ;; -esac -]) + case $host_os in + beos*) + lt_cv_dlopen="load_add_on" + lt_cv_dlopen_libs= + lt_cv_dlopen_self=yes + ;; -# AC_LIBLTDL_CONVENIENCE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl convenience library, adds --enable-ltdl-convenience to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -AC_DEFUN(AC_LIBLTDL_CONVENIENCE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - case "$enable_ltdl_convenience" in - no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; - "") enable_ltdl_convenience=yes - ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + cygwin* | mingw* | pw32*) + lt_cv_dlopen="LoadLibrary" + lt_cv_dlopen_libs= + ;; + + *) + AC_CHECK_FUNC(shl_load, lt_cv_dlopen="shl_load", + [AC_CHECK_LIB(dld, shl_load, + [lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld"], + [AC_CHECK_LIB(dl, dlopen, + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl"], + [AC_CHECK_FUNC(dlopen, lt_cv_dlopen="dlopen", + [AC_CHECK_LIB(svld, dlopen, + [lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld"]) + ]) + ]) + ]) + ]) + ;; esac - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdlc.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) -]) -# AC_LIBLTDL_INSTALLABLE[(dir)] - sets LIBLTDL to the link flags for -# the libltdl installable library, and adds --enable-ltdl-install to -# the configure arguments. Note that LIBLTDL is not AC_SUBSTed, nor -# is AC_CONFIG_SUBDIRS called. If DIR is not provided, it is assumed -# to be `${top_builddir}/libltdl'. Make sure you start DIR with -# '${top_builddir}/' (note the single quotes!) if your package is not -# flat, and, if you're not using automake, define top_builddir as -# appropriate in the Makefiles. -# In the future, this macro may have to be called after AC_PROG_LIBTOOL. -AC_DEFUN(AC_LIBLTDL_INSTALLABLE, [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl - AC_CHECK_LIB(ltdl, main, - [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], - [if test x"$enable_ltdl_install" = xno; then - AC_MSG_WARN([libltdl not installed, but installation disabled]) - else - enable_ltdl_install=yes - fi - ]) - if test x"$enable_ltdl_install" = x"yes"; then - ac_configure_args="$ac_configure_args --enable-ltdl-install" - LIBLTDL=ifelse($#,1,$1,['${top_builddir}/libltdl'])/libltdl.la - INCLTDL=ifelse($#,1,-I$1,['-I${top_builddir}/libltdl']) + if test "x$lt_cv_dlopen" != xno; then + enable_dlopen=yes else - ac_configure_args="$ac_configure_args --enable-ltdl-install=no" - LIBLTDL="-lltdl" - INCLTDL= + enable_dlopen=no fi + + case $lt_cv_dlopen in + dlopen) + save_CPPFLAGS="$CPPFLAGS" + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" + eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" + + AC_CACHE_CHECK([whether a program can dlopen itself], + lt_cv_dlopen_self, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self=yes, lt_cv_dlopen_self=yes, + lt_cv_dlopen_self=no, lt_cv_dlopen_self=cross) + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then + LDFLAGS="$LDFLAGS $link_static_flag" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( + lt_cv_dlopen_self_static=yes, lt_cv_dlopen_self_static=yes, + lt_cv_dlopen_self_static=no, lt_cv_dlopen_self_static=cross) + ]) + fi + + CPPFLAGS="$save_CPPFLAGS" + LDFLAGS="$save_LDFLAGS" + LIBS="$save_LIBS" + ;; + esac + + case $lt_cv_dlopen_self in + yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; + *) enable_dlopen_self=unknown ;; + esac + + case $lt_cv_dlopen_self_static in + yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; + *) enable_dlopen_self_static=unknown ;; + esac +fi +])# AC_LIBTOOL_DLOPEN_SELF + + +# AC_LIBTOOL_PROG_CC_C_O([TAGNAME]) +# --------------------------------- +# Check to see if options -c and -o are simultaneously supported by compiler +AC_DEFUN([AC_LIBTOOL_PROG_CC_C_O], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl +AC_CACHE_CHECK([if $compiler supports -c -o file.$ac_objext], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)], + [_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=no + $rm -r conftest 2>/dev/null + mkdir conftest + cd conftest + mkdir out + ifelse([$1],[],[save_CFLAGS="$CFLAGS" + CFLAGS="$CFLAGS -o out/conftest2.$ac_objext"], + [$1],[CXX],[save_CXXFLAGS="$CXXFLAGS" + CXXFLAGS="$CXXFLAGS -o out/conftest2.$ac_objext"], + [$1],[GCJ],[save_GCJFLAGS="$GCJFLAGS" + GCJFLAGS="$GCJFLAGS -o out/conftest2.$ac_objext"]) + echo "$lt_simple_compile_test_code" > conftest.$ac_ext + + # According to Tom Tromey, Ian Lance Taylor reported there are C compilers + # that will create temporary files in the current directory regardless of + # the output directory. Thus, making CWD read-only will cause this test + # to fail, enabling locking or at least warning the user not to do parallel + # builds. + chmod -w . + + if (eval $ac_compile 2>out/conftest.err) && test -s out/conftest2.$ac_objext + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s out/conftest.err; then + # Append any errors to the config.log. + cat out/conftest.err 1>&AS_MESSAGE_LOG_FD + else + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi + ifelse([$1],[],[CFLAGS="$save_CFLAGS"], + [$1],[CXX],[CXXFLAGS="$save_CXXFLAGS"], + [$1],[GCJ],[GCJFLAGS="$save_GCJFLAGS"]) + chmod u+w . + $rm conftest* out/* + rmdir out + cd .. + rmdir conftest + $rm conftest* ]) +])# AC_LIBTOOL_PROG_CC_C_O + -dnl old names -AC_DEFUN(AM_PROG_LIBTOOL, [indir([AC_PROG_LIBTOOL])])dnl -AC_DEFUN(AM_ENABLE_SHARED, [indir([AC_ENABLE_SHARED], $@)])dnl -AC_DEFUN(AM_ENABLE_STATIC, [indir([AC_ENABLE_STATIC], $@)])dnl -AC_DEFUN(AM_DISABLE_SHARED, [indir([AC_DISABLE_SHARED], $@)])dnl -AC_DEFUN(AM_DISABLE_STATIC, [indir([AC_DISABLE_STATIC], $@)])dnl -AC_DEFUN(AM_PROG_LD, [indir([AC_PROG_LD])])dnl -AC_DEFUN(AM_PROG_NM, [indir([AC_PROG_NM])])dnl - -dnl This is just to silence aclocal about the macro not being used -ifelse([AC_DISABLE_FAST_INSTALL])dnl +# AC_LIBTOOL_SYS_HARD_LINK_LOCKS([TAGNAME]) +# ----------------------------------------- +# Check to see if we can do hard links to lock some files if needed +AC_DEFUN([AC_LIBTOOL_SYS_HARD_LINK_LOCKS], +[AC_REQUIRE([_LT_AC_LOCK])dnl + +hard_links="nottested" +if test "$_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)" = no && test "$need_locks" != no; then + # do not overwrite the value of need_locks provided by the user + AC_MSG_CHECKING([if we can lock with hard links]) + hard_links=yes + $rm conftest* + ln conftest.a conftest.b 2>/dev/null && hard_links=no + touch conftest.a + ln conftest.a conftest.b 2>&5 || hard_links=no + ln conftest.a conftest.b 2>/dev/null && hard_links=no + AC_MSG_RESULT([$hard_links]) + if test "$hard_links" = no; then + AC_MSG_WARN([`$CC' does not support `-c -o', so `make -j' may be unsafe]) + need_locks=warn + fi +else + need_locks=no +fi +])# AC_LIBTOOL_SYS_HARD_LINK_LOCKS + + +# AC_LIBTOOL_OBJDIR +# ----------------- +AC_DEFUN([AC_LIBTOOL_OBJDIR], +[AC_CACHE_CHECK([for objdir], [lt_cv_objdir], +[rm -f .libs 2>/dev/null +mkdir .libs 2>/dev/null +if test -d .libs; then + lt_cv_objdir=.libs +else + # MS-DOS does not allow filenames that begin with a dot. + lt_cv_objdir=_libs +fi +rmdir .libs 2>/dev/null]) +objdir=$lt_cv_objdir +])# AC_LIBTOOL_OBJDIR + + +# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH([TAGNAME]) +# ---------------------------------------------- +# Check hardcoding attributes. +AC_DEFUN([AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH], +[AC_MSG_CHECKING([how to hardcode library paths into programs]) +_LT_AC_TAGVAR(hardcode_action, $1)= +if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ + test -n "$_LT_AC_TAGVAR(runpath_var $1)"; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && + # If the only mechanism to avoid hardcoding is shlibpath_var, we + # have to relink, otherwise we might link with an installed library + # when we should be linking with a yet-to-be-installed one + ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)" != no && + test "$_LT_AC_TAGVAR(hardcode_minus_L, $1)" != no; then + # Linking always hardcodes the temporary library directory. + _LT_AC_TAGVAR(hardcode_action, $1)=relink + else + # We can link without hardcoding, and we can hardcode nonexisting dirs. + _LT_AC_TAGVAR(hardcode_action, $1)=immediate + fi +else + # We cannot hardcode anything, or else we can only hardcode existing + # directories. + _LT_AC_TAGVAR(hardcode_action, $1)=unsupported +fi +AC_MSG_RESULT([$_LT_AC_TAGVAR(hardcode_action, $1)]) + +if test "$_LT_AC_TAGVAR(hardcode_action, $1)" = relink; then + # Fast installation is not supported + enable_fast_install=no +elif test "$shlibpath_overrides_runpath" = yes || + test "$enable_shared" = no; then + # Fast installation is not necessary + enable_fast_install=needless +fi +])# AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH + + +# AC_LIBTOOL_SYS_LIB_STRIP +# ------------------------ +AC_DEFUN([AC_LIBTOOL_SYS_LIB_STRIP], +[striplib= +old_striplib= +AC_MSG_CHECKING([whether stripping libraries is possible]) +if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then + test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" + test -z "$striplib" && striplib="$STRIP --strip-unneeded" + AC_MSG_RESULT([yes]) +else + AC_MSG_RESULT([no]) +fi +])# AC_LIBTOOL_SYS_LIB_STRIP + + +# AC_LIBTOOL_SYS_DYNAMIC_LINKER +# ----------------------------- +# PORTME Fill in your ld.so characteristics +AC_DEFUN([AC_LIBTOOL_SYS_DYNAMIC_LINKER], +[AC_MSG_CHECKING([dynamic linker characteristics]) +library_names_spec= +libname_spec='lib$name' +soname_spec= +postinstall_cmds= +postuninstall_cmds= +finish_cmds= +finish_eval= +shlibpath_var= +shlibpath_overrides_runpath=unknown +version_type=none +dynamic_linker="$host_os ld.so" +sys_lib_dlsearch_path_spec="/lib /usr/lib" +sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" +need_lib_prefix=unknown +hardcode_into_libs=no + +# when you set need_version to no, make sure it does not cause -set_version +# flags to be left without arguments +need_version=unknown + +case $host_os in +aix3*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix $libname.a' + shlibpath_var=LIBPATH + + # AIX 3 has no versioning support, so we append a major version to the name. + soname_spec='${libname}${release}.so$major' + ;; + +aix4* | aix5*) + version_type=linux + if test "$host_cpu" = ia64; then + # AIX 5 supports IA64 + library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' + shlibpath_var=LD_LIBRARY_PATH + else + # With GCC up to 2.95.x, collect2 would create an import file + # for dependence libraries. The import file would start with + # the line `#! .'. This would cause the generated library to + # depend on `.', always an invalid library. This was fixed in + # development snapshots of GCC prior to 3.0. + case $host_os in + [ aix4 | aix4.[01] | aix4.[01].*)] + if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' + echo ' yes ' + echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then + : + else + can_build_shared=no + fi + ;; + esac + # AIX (on Power*) has no versioning support, so currently we can not hardcode correct + # soname into executable. Probably we can add versioning support to + # collect2, so additional links can be useful in future. + if test "$aix_use_runtimelinking" = yes; then + # If using run time linking (on AIX 4.2 or later) use lib.so + # instead of lib.a to let people know that these are not + # typical AIX shared libraries. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + else + # We preserve .a as extension for shared libraries through AIX4.2 + # and later when we are not doing run time linking. + library_names_spec='${libname}${release}.a $libname.a' + soname_spec='${libname}${release}.so$major' + fi + shlibpath_var=LIBPATH + deplibs_check_method=pass_all + fi + ;; + +amigaos*) + library_names_spec='$libname.ixlibrary $libname.a' + # Create ${libname}_ixlibrary.a entries in /sys/libs. + finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | [$Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\'']`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; + +beos*) + library_names_spec='${libname}.so' + dynamic_linker="$host_os ld.so" + shlibpath_var=LIBRARY_PATH + ;; + +bsdi4*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs + ;; + +cygwin* | mingw* | pw32*) + version_type=windows + need_version=no + need_lib_prefix=no + case $GCC,$host_os in + yes,cygwin*) + library_names_spec='$libname.dll.a' + sys_lib_search_path_spec="/lib /lib/w32api /usr/lib /usr/local/lib" + soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' + postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ + $install_prog .libs/$dlname \$dldir/$dlname' + postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' + ;; + yes,mingw*) + library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll' + sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/$PATH_SEPARATOR/ /g"` + ;; + yes,pw32*) + library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' + ;; + *) + library_names_spec='${libname}`echo ${release} | [sed -e 's/[.]/-/g']`${versuffix}.dll $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' + # FIXME: first we should search . and the directory the executable is in + shlibpath_var=PATH + ;; + +darwin* | rhapsody*) + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no + need_version=no + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' + soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH + ;; + +dgux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +freebsd1*) + dynamic_linker=no + ;; + +freebsd*) + objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) + library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' + need_version=yes + ;; + esac + shlibpath_var=LD_LIBRARY_PATH + case $host_os in + freebsd2*) + shlibpath_overrides_runpath=yes + ;; + freebsd3.[01]* | freebsdelf3.[01]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + *) # from 3.2 on + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; + esac + ;; + +gnu*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; + +hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. + version_type=sunos + need_lib_prefix=no + need_version=no + if test "$host_cpu" = ia64; then + hardcode_into_libs=yes + dynamic_linker="$host_os dld.so" + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + if test "X$HPUX_IA64_MODE" = X32; then + sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" + else + sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" + fi + sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec + else + dynamic_linker="$host_os dld.sl" + shlibpath_var=SHLIB_PATH + shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH + library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' + soname_spec='${libname}${release}.sl$major' + fi + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + +irix5* | irix6*) + version_type=irix + need_lib_prefix=no + need_version=no + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' + case $host_os in + irix5*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD + *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; + *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; + *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; + esac + shlibpath_var=LD_LIBRARY${shlibsuff}_PATH + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" + ;; + +# No shared lib support for Linux oldld, aout, or coff. +linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + +# This must be Linux ELF. +linux*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no + # This implies no fast_install, which is unacceptable. + # Some rework will be needed to allow for fast_install + # before this can be enabled. + hardcode_into_libs=yes + + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, + # most powerpc-linux boxes support dynamic linking these days and + # people can always --disable-shared, the test was removed, and we + # assume the GNU/Linux dynamic linker is in use. + dynamic_linker='GNU/Linux ld.so' + ;; + +netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' + soname_spec='${libname}${release}.so$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; + +newsos6) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +nto-qnx) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + +openbsd*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH + file_magic_cmd=/usr/bin/file + file_magic_test_file=`echo /usr/lib/libc.so.*` + if [ "`echo __ELF__ | $CC -E - | grep __ELF__`" = "" -o "$host_os-$host_cpu" = "openbsd2.8-powerpc" ]; then + deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' + else + deplibs_check_method='file_magic OpenBSD.* shared library' + fi + ;; + +os2*) + libname_spec='$name' + need_lib_prefix=no + library_names_spec='$libname.dll $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + +osf3* | osf4* | osf5*) + version_type=osf + need_version=no + soname_spec='${libname}${release}.so' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +sco3.2v5*) + version_type=osf + soname_spec='${libname}${release}.so$major' + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + shlibpath_var=LD_LIBRARY_PATH + ;; + +solaris*) + version_type=linux + need_lib_prefix=no + need_version=no + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + # ldd complains unless libraries are executable + postinstall_cmds='chmod +x $lib' + ;; + +sunos4*) + version_type=sunos + library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + if test "$with_gnu_ld" = yes; then + need_lib_prefix=no + fi + need_version=yes + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) + shlibpath_overrides_runpath=no + ;; + motorola) + need_lib_prefix=no + need_version=no + shlibpath_overrides_runpath=no + sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' + ;; + esac + ;; + +sysv4*MP*) + if test -d /usr/nec ;then + version_type=linux + library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' + soname_spec='$libname.so.$major' + shlibpath_var=LD_LIBRARY_PATH + fi + ;; + +uts4*) + version_type=linux + library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' + soname_spec='${libname}${release}.so$major' + shlibpath_var=LD_LIBRARY_PATH + ;; + +*) + dynamic_linker=no + ;; +esac +AC_MSG_RESULT([$dynamic_linker]) +test "$dynamic_linker" = no && can_build_shared=no +])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +# _LT_AC_TAGCONFIG +# ---------------- +AC_DEFUN([_LT_AC_TAGCONFIG], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +AC_ARG_WITH([tags], + [AC_HELP_STRING([--with-tags=TAGS], + [include additional configurations @<:@CXX,GCJ@:>@])], + [tagnames="$withval"], + [tagnames="CXX,GCJ"]) + +if test -f "$ltmain" && test -n "$tagnames"; then + if test ! -f "${ofile}"; then + AC_MSG_WARN([output file `$ofile' does not exist]) + fi + + if test -z "$LTCC"; then + eval "`$SHELL ${ofile} --config | grep '^LTCC='`" + if test -z "$LTCC"; then + AC_MSG_WARN([output file `$ofile' does not look like a libtool script]) + else + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. + available_tags=`grep "^available_tags=" "${ofile}" | sed -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` + + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," + for tagname in $tagnames; do + IFS="$lt_save_ifs" + # Check whether tagname contains only valid characters + [case `$echo "X$tagname" | $Xsed -e 's/[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]//g'` in] + "") ;; + *) AC_MSG_ERROR([invalid tag name: $tagname]) + ;; + esac + + if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null + then + AC_MSG_ERROR([tag name $tagname already exists]) + fi + + # Update the list of available tags. + if test -n "$tagname"; then + echo appending configuration tag \"$tagname\" to $ofile + + case $tagname in + CXX) + AC_LIBTOOL_LANG_CXX_CONFIG + ;; + + GCJ) + AC_LIBTOOL_LANG_GCJ_CONFIG + ;; + + *) + AC_MSG_ERROR([Unsupported tag name: $tagname]) + ;; + esac + + # Append the new tag name to the list of available tags. + available_tags="$available_tags $tagname" + fi + done + IFS="$lt_save_ifs" + + # Now substitute the updated list of available tags. + if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then + mv "${ofile}T" "$ofile" + chmod +x "$ofile" + else + rm -f "${ofile}T" + AC_MSG_ERROR([unable to update list of available tagged configurations.]) + fi +fi +])# _LT_AC_TAGCONFIG + + +# AC_LIBTOOL_DLOPEN +# ----------------- +# enable checks for dlopen support +AC_DEFUN([AC_LIBTOOL_DLOPEN], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_DLOPEN + + +# AC_LIBTOOL_WIN32_DLL +# -------------------- +# declare package support for building win32 dll's +AC_DEFUN([AC_LIBTOOL_WIN32_DLL], +[AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) +])# AC_LIBTOOL_WIN32_DLL + + +# AC_ENABLE_SHARED([DEFAULT]) +# --------------------------- +# implement the --enable-shared flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_SHARED], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +define([AC_ENABLE_SHARED_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([shared], + [AC_HELP_STRING([--enable-shared@<:@=PKGS@:>@], + [build shared libraries @<:@default=]AC_ENABLE_SHARED_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_shared=yes ;; + no) enable_shared=no ;; + *) + enable_shared=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_shared=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_shared=]AC_ENABLE_SHARED_DEFAULT) +])# AC_ENABLE_SHARED + + +# AC_DISABLE_SHARED +# ----------------- +#- set the default shared flag to --disable-shared +AC_DEFUN([AC_DISABLE_SHARED], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_SHARED(no) +])# AC_DISABLE_SHARED + + +# AC_ENABLE_STATIC([DEFAULT]) +# --------------------------- +# implement the --enable-static flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_STATIC], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +define([AC_ENABLE_STATIC_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([static], + [AC_HELP_STRING([--enable-static@<:@=PKGS@:>@], + [build static libraries @<:@default=]AC_ENABLE_STATIC_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_static=yes ;; + no) enable_static=no ;; + *) + enable_static=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_static=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_static=]AC_ENABLE_STATIC_DEFAULT) +])# AC_ENABLE_STATIC + + +# AC_DISABLE_STATIC +# ----------------- +# set the default static flag to --disable-static +AC_DEFUN([AC_DISABLE_STATIC], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_STATIC(no) +])# AC_DISABLE_STATIC + + +# AC_ENABLE_FAST_INSTALL([DEFAULT]) +# --------------------------------- +# implement the --enable-fast-install flag +# DEFAULT is either `yes' or `no'. If omitted, it defaults to `yes'. +AC_DEFUN([AC_ENABLE_FAST_INSTALL], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +define([AC_ENABLE_FAST_INSTALL_DEFAULT], ifelse($1, no, no, yes))dnl +AC_ARG_ENABLE([fast-install], + [AC_HELP_STRING([--enable-fast-install@<:@=PKGS@:>@], + [optimize for fast installation @<:@default=]AC_ENABLE_FAST_INSTALL_DEFAULT[@:>@])], + [p=${PACKAGE-default} + case $enableval in + yes) enable_fast_install=yes ;; + no) enable_fast_install=no ;; + *) + enable_fast_install=no + # Look at the argument we got. We use all the common list separators. + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}," + for pkg in $enableval; do + IFS="$lt_save_ifs" + if test "X$pkg" = "X$p"; then + enable_fast_install=yes + fi + done + IFS="$lt_save_ifs" + ;; + esac], + [enable_fast_install=]AC_ENABLE_FAST_INSTALL_DEFAULT) +])# AC_ENABLE_FAST_INSTALL + + +# AC_DISABLE_FAST_INSTALL +# ----------------------- +# set the default to --disable-fast-install +AC_DEFUN([AC_DISABLE_FAST_INSTALL], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +AC_ENABLE_FAST_INSTALL(no) +])# AC_DISABLE_FAST_INSTALL + + +# AC_LIBTOOL_PICMODE([MODE]) +# -------------------------- +# implement the --with-pic flag +# MODE is either `yes' or `no'. If omitted, it defaults to `both'. +AC_DEFUN([AC_LIBTOOL_PICMODE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +pic_mode=ifelse($#,1,$1,default) +])# AC_LIBTOOL_PICMODE + + +# AC_PATH_TOOL_PREFIX +# ------------------- +# find a file program which can recognise shared library +AC_DEFUN([AC_PATH_TOOL_PREFIX], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +AC_MSG_CHECKING([for $1]) +AC_CACHE_VAL(lt_cv_path_MAGIC_CMD, +[case $MAGIC_CMD in +[\\/*] | ?:[\\/]*) + lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. + ;; +*) + lt_save_MAGIC_CMD="$MAGIC_CMD" + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${PATH_SEPARATOR-:}" +dnl $ac_dummy forces splitting on constant user-supplied paths. +dnl POSIX.2 word splitting is done only on the output of word expansions, +dnl not every word. This closes a longstanding sh security hole. + ac_dummy="ifelse([$2], , $PATH, [$2])" + for ac_dir in $ac_dummy; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f $ac_dir/$1; then + lt_cv_path_MAGIC_CMD="$ac_dir/$1" + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) + file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + egrep "$file_magic_regex" > /dev/null; then + : + else + cat <&2 + +*** Warning: the command libtool uses to detect shared libraries, +*** $file_magic_cmd, produces output that libtool cannot recognize. +*** The result is that libtool may fail to recognize shared libraries +*** as such. This will affect the creation of libtool libraries that +*** depend on shared libraries, but programs linked with such libtool +*** libraries will work regardless of this problem. Nevertheless, you +*** may want to report the problem to your system manager and/or to +*** bug-libtool@gnu.org + +EOF + fi ;; + esac + fi + break + fi + done + IFS="$lt_save_ifs" + MAGIC_CMD="$lt_save_MAGIC_CMD" + ;; +esac]) +MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +if test -n "$MAGIC_CMD"; then + AC_MSG_RESULT($MAGIC_CMD) +else + AC_MSG_RESULT(no) +fi +])# AC_PATH_TOOL_PREFIX + + +# AC_PATH_MAGIC +# ------------- +# find a file program which can recognise a shared library +AC_DEFUN([AC_PATH_MAGIC], +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +AC_PATH_TOOL_PREFIX(${ac_tool_prefix}file, /usr/bin${PATH_SEPARATOR-:}$PATH) +if test -z "$lt_cv_path_MAGIC_CMD"; then + if test -n "$ac_tool_prefix"; then + AC_PATH_TOOL_PREFIX(file, /usr/bin${PATH_SEPARATOR-:}$PATH) + else + MAGIC_CMD=: + fi +fi +])# AC_PATH_MAGIC + + +# AC_PROG_LD +# ---------- +# find the path to the GNU or non-GNU linker +AC_DEFUN([AC_PROG_LD], +[AC_ARG_WITH([gnu-ld], + [AC_HELP_STRING([--with-gnu-ld], + [assume the C compiler uses GNU ld @<:@default=no@:>@])], + [test "$withval" = no || with_gnu_ld=yes], + [with_gnu_ld=no]) +AC_REQUIRE([AC_PROG_CC])dnl +AC_REQUIRE([AC_CANONICAL_HOST])dnl +AC_REQUIRE([AC_CANONICAL_BUILD])dnl +AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +ac_prog=ld +if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. + AC_MSG_CHECKING([for ld used by GCC]) + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw + ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; + *) + ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; + esac + case $ac_prog in + # Accept absolute paths. + [[\\/]]* | ?:[[\\/]]*) + [re_direlt='/[^/][^/]*/\.\./'] + # Canonicalize the path of ld + ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do + ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; + "") + # If it fails, then pretend we aren't using GCC. + ac_prog=ld + ;; + *) + # If it is relative, then search for the first ld in PATH. + with_gnu_ld=unknown + ;; + esac +elif test "$with_gnu_ld" = yes; then + AC_MSG_CHECKING([for GNU ld]) +else + AC_MSG_CHECKING([for non-GNU ld]) +fi +AC_CACHE_VAL(lt_cv_path_LD, +[if test -z "$LD"; then + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, + # but apparently some GNU ld's only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then + test "$with_gnu_ld" != no && break + else + test "$with_gnu_ld" != yes && break + fi + fi + done + IFS="$lt_save_ifs" +else + lt_cv_path_LD="$LD" # Let the user override the test with a path. +fi]) +LD="$lt_cv_path_LD" +if test -n "$LD"; then + AC_MSG_RESULT($LD) +else + AC_MSG_RESULT(no) +fi +test -z "$LD" && AC_MSG_ERROR([no acceptable ld found in \$PATH]) +AC_PROG_LD_GNU +])# AC_PROG_LD + + +# AC_PROG_LD_GNU +# -------------- +AC_DEFUN([AC_PROG_LD_GNU], +[AC_CACHE_CHECK([if the linker ($LD) is GNU ld], lt_cv_prog_gnu_ld, +[# I'd rather use --version here, but apparently some GNU ld's only accept -v. +if $LD -v 2>&1 &5; then + lt_cv_prog_gnu_ld=yes +else + lt_cv_prog_gnu_ld=no +fi]) +with_gnu_ld=$lt_cv_prog_gnu_ld +])# AC_PROG_LD_GNU + + +# AC_PROG_LD_RELOAD_FLAG +# ---------------------- +# find reload flag for linker +# -- PORTME Some linkers may need a different reload flag. +AC_DEFUN([AC_PROG_LD_RELOAD_FLAG], +[AC_CACHE_CHECK([for $LD option to reload object files], + lt_cv_ld_reload_flag, + [lt_cv_ld_reload_flag='-r']) +reload_flag=$lt_cv_ld_reload_flag +case $reload_flag in +"" | " "*) ;; +*) reload_flag=" $reload_flag" ;; +esac +reload_cmds='$LD$reload_flag -o $output$reload_objs' +])# AC_PROG_LD_RELOAD_FLAG + + +# AC_DEPLIBS_CHECK_METHOD +# ----------------------- +# how to check for library dependencies +# -- PORTME fill in with the dynamic library characteristics +AC_DEFUN([AC_DEPLIBS_CHECK_METHOD], +[AC_CACHE_CHECK([how to recognise dependant libraries], +lt_cv_deplibs_check_method, +[lt_cv_file_magic_cmd='$MAGIC_CMD' +lt_cv_file_magic_test_file= +lt_cv_deplibs_check_method='unknown' +# Need to set the preceding variable on all platforms that support +# interlibrary dependencies. +# 'none' -- dependencies not supported. +# `unknown' -- same as none, but documents that we really don't know. +# 'pass_all' -- all dependencies passed with no checks. +# 'test_compile' -- check by making test program. +# ['file_magic [regex]'] -- check by looking for files in library path +# which responds to the $file_magic_cmd with a given egrep regex. +# If you have `file' or equivalent on your system and you're not sure +# whether `pass_all' will *always* work, you probably want this one. + +case $host_os in +aix4* | aix5*) + lt_cv_deplibs_check_method=pass_all + ;; + +beos*) + lt_cv_deplibs_check_method=pass_all + ;; + +bsdi4*) + [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)'] + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +cygwin* | mingw* | pw32*) + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + +darwin* | rhapsody*) + lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' + lt_cv_file_magic_cmd='/usr/bin/file -L' + case "$host_os" in + rhapsody* | darwin1.[012]) + lt_cv_file_magic_test_file=`/System/Library/Frameworks/System.framework/System` + ;; + *) # Darwin 1.3 on + lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' + ;; + esac + ;; + +freebsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. + [lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library'] + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; + esac + else + lt_cv_deplibs_check_method=pass_all + fi + ;; + +gnu*) + lt_cv_deplibs_check_method=pass_all + ;; + +hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file + if test "$host_cpu" = ia64; then + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64'] + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so + else + [lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library'] + lt_cv_file_magic_test_file=/usr/lib/libc.sl + fi + ;; + +irix5* | irix6*) + case $host_os in + irix5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" + ;; + *) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; + *-n32|*"-n32 ") libmagic=N32;; + *-64|*"-64 ") libmagic=64-bit;; + *) libmagic=never-match;; + esac + # this will be overridden with pass_all, but let us keep it just in case + [lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1"] + ;; + esac + lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` + lt_cv_deplibs_check_method=pass_all + ;; + +# This must be Linux ELF. +linux*) + case $host_cpu in + alpha* | hppa* | i*86 | ia64* | m68* | mips | mipsel | powerpc* | sparc* | s390* | sh*) + lt_cv_deplibs_check_method=pass_all ;; + *) + # glibc up to 2.1.1 does not perform some relocations on ARM + [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;;] + esac + lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` + ;; + +netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$'] + else + [lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$'] + fi + ;; + +newos6*) + [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (executable|dynamic lib)'] + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + +nto-qnx) + lt_cv_deplibs_check_method=unknown + ;; + +osf3* | osf4* | osf5*) + # this will be overridden with pass_all, but let us keep it just in case + lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' + lt_cv_file_magic_test_file=/shlib/libc.so + lt_cv_deplibs_check_method=pass_all + ;; + +sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + +solaris*) + lt_cv_deplibs_check_method=pass_all + lt_cv_file_magic_test_file=/lib/libc.so + ;; + +sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + case $host_vendor in + motorola) + [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]'] + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so*` + ;; + ncr) + lt_cv_deplibs_check_method=pass_all + ;; + sequent) + lt_cv_file_magic_cmd='/bin/file' + [lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )'] + ;; + sni) + lt_cv_file_magic_cmd='/bin/file' + [lt_cv_deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB dynamic lib"] + lt_cv_file_magic_test_file=/lib/libc.so + ;; + esac + ;; + +sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; +esac +]) +file_magic_cmd=$lt_cv_file_magic_cmd +deplibs_check_method=$lt_cv_deplibs_check_method +test -z "$deplibs_check_method" && deplibs_check_method=unknown +])# AC_DEPLIBS_CHECK_METHOD + + +# AC_PROG_NM +# ---------- +# find the path to a BSD-compatible name lister +AC_DEFUN([AC_PROG_NM], +[AC_CACHE_CHECK([for BSD-compatible nm], lt_cv_path_NM, +[AC_REQUIRE([_LT_AC_LIBTOOL_SYS_PATH_SEPARATOR])dnl +if test -n "$NM"; then + # Let the user override the test. + lt_cv_path_NM="$NM" +else + IFS="${IFS= }"; lt_save_ifs="$IFS"; IFS="${IFS}${PATH_SEPARATOR-:}" + for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do + IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + tmp_nm=$ac_dir/${ac_tool_prefix}nm + if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then + # Check to see if the nm accepts a BSD-compat flag. + # Adding the `sed 1q' prevents false positives on HP-UX, which says: + # nm: unknown option "B" ignored + # Tru64's nm complains that /dev/null is an invalid object file + if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then + lt_cv_path_NM="$tmp_nm -B" + break + elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then + lt_cv_path_NM="$tmp_nm -p" + break + else + lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but + continue # so that we can try to find one that supports BSD flags + fi + fi + done + IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +fi]) +NM="$lt_cv_path_NM" +])# AC_PROG_NM + + +# AC_CHECK_LIBM +# ------------- +# check for math library +AC_DEFUN([AC_CHECK_LIBM], +[AC_REQUIRE([AC_CANONICAL_HOST])dnl +LIBM= +case $host in +*-*-beos* | *-*-cygwin* | *-*-pw32*) + # These system don't have libm + ;; +*-ncr-sysv4.3*) + AC_CHECK_LIB(mw, _mwvalidcheckl, LIBM="-lmw") + AC_CHECK_LIB(m, main, LIBM="$LIBM -lm") + ;; +*) + AC_CHECK_LIB(m, main, LIBM="-lm") + ;; +esac +])# AC_CHECK_LIBM + + +# AC_LIBLTDL_CONVENIENCE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl convenience library and +# INCLTDL to the include flags for the libltdl header and adds +# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +# and INCLTDL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +# be prefixed with '${top_builddir}/' and INCLTDL will be prefixed with +# '${top_srcdir}/' (note the single quotes!). If your package is not +# flat and you're not using automake, define top_builddir and +# top_srcdir appropriately in the Makefiles. +AC_DEFUN([AC_LIBLTDL_CONVENIENCE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in + no) AC_MSG_ERROR([this package needs a convenience libltdl]) ;; + "") enable_ltdl_convenience=yes + ac_configure_args="$ac_configure_args --enable-ltdl-convenience" ;; + esac + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdlc.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) +])# AC_LIBLTDL_CONVENIENCE + + +# AC_LIBLTDL_INSTALLABLE([DIRECTORY]) +# ----------------------------------- +# sets LIBLTDL to the link flags for the libltdl installable library and +# INCLTDL to the include flags for the libltdl header and adds +# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +# and INCLTDL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +# DIRECTORY is not provided and an installed libltdl is not found, it is +# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +# and INCLTDL will be prefixed with '${top_srcdir}/' (note the single +# quotes!). If your package is not flat and you're not using automake, +# define top_builddir and top_srcdir appropriately in the Makefiles. +# In the future, this macro may have to be called after AC_PROG_LIBTOOL. +AC_DEFUN([AC_LIBLTDL_INSTALLABLE], +[AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_CHECK_LIB(ltdl, main, + [test x"$enable_ltdl_install" != xyes && enable_ltdl_install=no], + [if test x"$enable_ltdl_install" = xno; then + AC_MSG_WARN([libltdl not installed, but installation disabled]) + else + enable_ltdl_install=yes + fi + ]) + if test x"$enable_ltdl_install" = x"yes"; then + ac_configure_args="$ac_configure_args --enable-ltdl-install" + LIBLTDL='${top_builddir}/'ifelse($#,1,[$1],['libltdl'])/libltdl.la + INCLTDL='-I${top_srcdir}/'ifelse($#,1,[$1],['libltdl']) + else + ac_configure_args="$ac_configure_args --enable-ltdl-install=no" + LIBLTDL="-lltdl" + INCLTDL= + fi +])# AC_LIBLTDL_INSTALLABLE + + +# If this macro is not defined by Autoconf, define it here. +ifdef([AC_PROVIDE_IFELSE], + [], + [define([AC_PROVIDE_IFELSE], + [ifdef([AC_PROVIDE_$1], + [$2], [$3])])]) + + +# AC_LIBTOOL_CXX +# -------------- +# enable support for C++ libraries +AC_DEFUN([AC_LIBTOOL_CXX], +[AC_REQUIRE([_LT_AC_LANG_CXX]) +])# AC_LIBTOOL_CXX + + +# _LT_AC_LANG_CXX +# --------------- +AC_DEFUN([_LT_AC_LANG_CXX], +[AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) +])# _LT_AC_LANG_CXX + + +# AC_LIBTOOL_GCJ +# -------------- +# enable support for GCJ libraries +AC_DEFUN([AC_LIBTOOL_GCJ], +[AC_REQUIRE([_LT_AC_LANG_GCJ]) +])# AC_LIBTOOL_GCJ + + +# _LT_AC_LANG_GCJ +# --------------- +AC_DEFUN([_LT_AC_LANG_GCJ], +[AC_PROVIDE_IFELSE([AC_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([A][M_PROG_GCJ],[], + [AC_PROVIDE_IFELSE([LT_AC_PROG_GCJ],[], + [ifdef([AC_PROG_GCJ],[AC_REQUIRE([AC_PROG_GCJ])], + [ifdef([A][M_PROG_GCJ],[AC_REQUIRE([A][M_PROG_GCJ])], + [AC_REQUIRE([A][C_PROG_GCJ_OR_A][M_PROG_GCJ])])])])])]) +])# _LT_AC_LANG_GCJ + + +# AC_LIBTOOL_LANG_C_CONFIG +# ------------------------ +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_C_CONFIG], [_LT_AC_LANG_C_CONFIG]) +AC_DEFUN([_LT_AC_LANG_C_CONFIG], +[lt_save_CC="$CC" +AC_LANG_PUSH(C) + +# Source file extension for C test sources. +ac_ext=c + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='main(){return(0);}' + +_LT_AC_SYS_COMPILER + +# +# Check for any special shared library compilation flags. +# +_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +if test "$GCC" = no; then + case $host_os in + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' + ;; + esac +fi +if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then + AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) + if echo "$old_CC $old_CFLAGS " | [egrep -e "[ ]$]_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]"] >/dev/null; then : + else + AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) + _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no + fi +fi + + +# +# Check to make sure the static flag actually works. +# +AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), + $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), + [], + [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + + +AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) +AC_LIBTOOL_PROG_COMPILER_PIC($1) +AC_LIBTOOL_PROG_CC_C_O($1) +AC_LIBTOOL_SYS_HARD_LINK_LOCKS($1) +AC_LIBTOOL_PROG_LD_SHLIBS($1) +AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +AC_LIBTOOL_SYS_LIB_STRIP +AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) +AC_LIBTOOL_DLOPEN_SELF($1) + +# Report which librarie types wil actually be built +AC_MSG_CHECKING([if libtool supports shared libraries]) +AC_MSG_RESULT([$can_build_shared]) + +AC_MSG_CHECKING([whether to build shared libraries]) +test "$can_build_shared" = "no" && enable_shared=no + +# On AIX, shared libraries and static libraries use the same namespace, and +# are all built from PIC. +case "$host_os" in +aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then + archive_cmds="$archive_cmds~\$RANLIB \$lib" + postinstall_cmds='$RANLIB $lib' + fi + ;; + +aix4*) + test "$enable_shared" = yes && enable_static=no + ;; +esac +AC_MSG_RESULT([$enable_shared]) + +AC_MSG_CHECKING([whether to build static libraries]) +# Make sure either enable_shared or enable_static is yes. +test "$enable_shared" = yes || enable_static=yes +AC_MSG_RESULT([$enable_static]) + +AC_LIBTOOL_CONFIG($1) + +AC_LANG_POP +CC="$lt_save_CC" +])# AC_LIBTOOL_LANG_C_CONFIG + + +# AC_LIBTOOL_LANG_CXX_CONFIG +# -------------------------- +# Ensure that the configuration vars for the C compiler are +# suitably defined. Those variables are subsequently used by +# AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +AC_DEFUN([AC_LIBTOOL_LANG_CXX_CONFIG], [_LT_AC_LANG_CXX_CONFIG(CXX)]) +AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], +[AC_LANG_PUSH(C++) +AC_REQUIRE([AC_PROG_CXX]) +AC_REQUIRE([AC_PROG_CXXCPP]) + +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +_LT_AC_TAGVAR(allow_undefined_flag, $1)= +_LT_AC_TAGVAR(always_export_symbols, $1)=no +_LT_AC_TAGVAR(archive_expsym_cmds, $1)= +_LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_direct, $1)=no +_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= +_LT_AC_TAGVAR(hardcode_libdir_separator, $1)= +_LT_AC_TAGVAR(hardcode_minus_L, $1)=no +_LT_AC_TAGVAR(link_all_deplibs, $1)=unknown +_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds +_LT_AC_TAGVAR(no_undefined_flag, $1)= +_LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + +# Dependencies to place before and after the object being linked: +_LT_AC_TAGVAR(predep_objects, $1)= +_LT_AC_TAGVAR(postdep_objects, $1)= +_LT_AC_TAGVAR(predeps, $1)= +_LT_AC_TAGVAR(postdeps, $1)= +_LT_AC_TAGVAR(compiler_lib_search_path, $1)= + +# Source file extension for C test sources. +ac_ext=cc + +# Object file extension for compiled C test sources. +objext=o +_LT_AC_TAGVAR(objext, $1)=$objext + +# Code to be used in simple compile tests +lt_simple_compile_test_code="int some_variable = 0;" + +# Code to be used in simple link tests +lt_simple_link_test_code='int main(int char *[]) { return(0); }' + +# ltmain only uses $CC for tagged configurations so make sure $CC is set. +_LT_AC_SYS_COMPILER + +# Allow CC to be a program name with arguments. +lt_save_CC="$CC" +CC=${CXX-"c++"} +set dummy $CC +compiler="[$]2" +_LT_AC_TAGVAR(compiler, $1)=$CC +cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` + +# We don't want -fno-exception wen compiling C++ code, so set the +# no_builtin_flag separately +if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' +else + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= +fi + +if test "$GXX" = yes; then + # Set up default GNU C++ configuration + + # Check if GNU C++ uses GNU ld as the underlying linker, since the + # archiving commands below assume that GNU ld is being used. + if eval "`$CC -print-prog-name=ld` --version 2>&1" | \ + egrep 'GNU ld' > /dev/null; then + with_gnu_ld=yes + + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # If archive_cmds runs LD, not CC, wlarc should be empty + # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to + # investigate it a little bit more. (MM) + wlarc='${wl}' + + # ancient GNU ld didn't support --whole-archive et. al. + if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ + egrep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + with_gnu_ld=no + wlarc= + + # A generic and very simple default shared library creation + # command for GNU C++ for the case where it uses the native + # linker, instead of GNU ld. If possible, this setting should + # overridden to take advantage of the native linker features on + # the platform it is being used on. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' + fi + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' + +else + GXX=no + with_gnu_ld=no + wlarc= +fi + +# PORTME: fill in a description of your system's C++ link characteristics +AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +_LT_AC_TAGVAR(ld_shlibs, $1)=yes +case $host_os in + aix3*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + chorus*) + case $cc_basename in + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + ghcx) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + freebsd[12]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; + freebsd*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + ;; + gnu*) + ;; + hpux*) + if test $with_gnu_ld = no; then + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + else + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + fi + fi + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + else + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + fi + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, but as the default + # location of the library. + + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + aCC) + case $host_os in + hpux9*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + ;; + *) + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + fi + ;; + esac + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | egrep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test $GXX = yes; then + if test $with_gnu_ld = no; then + case "$host_os" in + hpux9*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + ;; + *) + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + fi + ;; + esac + fi + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + # SGI C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -ar -WR,-u -o $oldlib $oldobjs' + ;; + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -o $lib' + fi + fi + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + esac + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + linux*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest.so 2>&1 | egrep "ld"`; rm -f libconftest.so; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; + cxx) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' + + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + esac + ;; + lynxos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + m88k*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + mvs*) + case $cc_basename in + cxx) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + netbsd*) + # NetBSD uses g++ - do we need to do anything? + ;; + osf3*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + osf4* | osf5*) + case $cc_basename in + KCC) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file + # ends with ".so" (or ".sl" for HP-UX), so rename the library + # to its proper name (with version) after linking. + _LT_AC_TAGVAR(archive_cmds, $1)='templib=`echo $lib | sed -e "s/\.so\..*/\.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Archives containing C++ object files must be created using + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; + RCC) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + cxx) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ + $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | sed "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep "\-L"' + + else + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + ;; + psos*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + sco*) + case $cc_basename in + CC) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + lcc) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[0-5] | solaris2.[0-5].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system + # linker. + # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + # + # There doesn't appear to be a way to prevent this compiler from + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. + output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep "\-R|\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is + # necessary to make sure instantiated templates are included + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + + # The C++ compiler must be used to create the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC $LDFLAGS -archive -o $oldlib $oldobjs' + ;; + *) + # GNU C++ compiler with Solaris linker + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-z ${wl}defs' + if $CC --version | egrep -v '^2\.7' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" + else + # g++ 2.7 appears to require `-G' NOT `-shared' on this + # platform. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $linker_flags ${wl}-h $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags~$rm $lib.exp' + + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when + # linking a shared library. + output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | egrep \"\-L\"" + fi + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $wl$libdir' + fi + ;; + esac + ;; + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $2)=no + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + ;; + vxworks*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + *) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +esac +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +# Figure out "hidden" C++ library dependencies from verbose +# compiler output whening linking a shared library. +cat > conftest.$ac_ext <> "$cfgfile" +ifelse([$1], [], +[#! $SHELL + +# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +# NOTE: Changes made to this file will be lost: look at ltmain.sh. +# +# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 +# Free Software Foundation, Inc. +# +# This file is part of GNU Libtool: +# Originally by Gordon Matzigkeit , 1996 +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, but +# WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +# General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# +# As a special exception to the GNU General Public License, if you +# distribute this file as part of a program that contains a +# configuration script generated by Autoconf, you may include it under +# the same distribution terms that you use for the rest of that program. + +# Sed that helps us avoid accidentally triggering echo(1) options like -n. +Xsed="sed -e s/^X//" + +# The HP-UX ksh and POSIX shell print the target directory to stdout +# if CDPATH is set. +if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi + +# The names of the tagged configurations supported by this script. +available_tags= + +# ### BEGIN LIBTOOL CONFIG], +[# ### BEGIN LIBTOOL TAG CONFIG: $tagname]) + +# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +# Shell to use when invoking shell scripts. +SHELL=$lt_SHELL + +# Whether or not to build shared libraries. +build_libtool_libs=$enable_shared + +# Whether or not to build static libraries. +build_old_libs=$enable_static + +# Whether or not to add -lc for building shared libraries. +build_libtool_need_lc=$_LT_AC_TAGVAR(archive_cmds_need_lc, $1) + +# Whether or not to optimize for fast installation. +fast_install=$enable_fast_install + +# The host system. +host_alias=$host_alias +host=$host + +# An echo program that does not interpret backslashes. +echo=$lt_echo + +# The archiver. +AR=$lt_AR +AR_FLAGS=$lt_AR_FLAGS + +# A C compiler. +LTCC=$LTCC + +# A language-specific compiler. +CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +# Is the compiler the GNU C compiler? +with_gcc=$_LT_AC_TAGVAR(GCC, $1) + +# The linker used to build libraries. +LD=$lt_[]_LT_AC_TAGVAR(LD, $1) + +# Whether we need hard or soft links. +LN_S=$lt_LN_S + +# A BSD-compatible nm program. +NM=$lt_NM + +# A symbol stripping program +STRIP=$STRIP + +# Used to examine libraries when file_magic_cmd begins "file" +MAGIC_CMD=$MAGIC_CMD + +# Used on cygwin: DLL creation program. +DLLTOOL="$DLLTOOL" + +# Used on cygwin: object dumper. +OBJDUMP="$OBJDUMP" + +# Used on cygwin: assembler. +AS="$AS" + +# The name of the directory that contains temporary libtool files. +objdir=$objdir + +# How to create reloadable object files. +reload_flag=$lt_reload_flag +reload_cmds=$lt_reload_cmds + +# How to pass a linker flag through the compiler. +wl=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + +# Object file suffix (normally "o"). +objext="$ac_objext" + +# Old archive suffix (normally "a"). +libext="$libext" + +# Executable file suffix (normally ""). +exeext="$exeext" + +# Additional compiler flags for building library objects. +pic_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) +pic_mode=$pic_mode + +# What is the maximum length of a command? +max_cmd_len=$lt_cv_sys_max_cmd_len + +# Does compiler simultaneously support -c and -o options? +compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +# Must we lock files when doing compilation ? +need_locks=$lt_need_locks + +# Do we need the lib prefix for modules? +need_lib_prefix=$need_lib_prefix + +# Do we need a version for libraries? +need_version=$need_version + +# Whether dlopen is supported. +dlopen_support=$enable_dlopen + +# Whether dlopen of programs is supported. +dlopen_self=$enable_dlopen_self + +# Whether dlopen of statically linked programs is supported. +dlopen_self_static=$enable_dlopen_self_static + +# Compiler flag to prevent dynamic linking. +link_static_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_static, $1) + +# Compiler flag to turn off builtin functions. +no_builtin_flag=$lt_[]_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) + +# Compiler flag to allow reflexive dlopens. +export_dynamic_flag_spec=$lt_[]_LT_AC_TAGVAR(export_dynamic_flag_spec, $1) + +# Compiler flag to generate shared objects directly from archives. +whole_archive_flag_spec=$lt_[]_LT_AC_TAGVAR(whole_archive_flag_spec, $1) + +# Compiler flag to generate thread-safe objects. +thread_safe_flag_spec=$lt_[]_LT_AC_TAGVAR(thread_safe_flag_spec, $1) + +# Library versioning type. +version_type=$version_type + +# Format of library name prefix. +libname_spec=$lt_libname_spec + +# List of archive names. First name is the real one, the rest are links. +# The last name is the one that the linker finds with -lNAME. +library_names_spec=$lt_library_names_spec + +# The coded name of the library, if different from the real name. +soname_spec=$lt_soname_spec + +# Commands used to build and install an old-style archive. +RANLIB=$lt_RANLIB +old_archive_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_cmds, $1) +old_postinstall_cmds=$lt_old_postinstall_cmds +old_postuninstall_cmds=$lt_old_postuninstall_cmds + +# Create an old-style archive from a shared archive. +old_archive_from_new_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_new_cmds, $1) + +# Create a temporary old-style archive to link instead of a shared archive. +old_archive_from_expsyms_cmds=$lt_[]_LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1) + +# Commands used to build and install a shared archive. +archive_cmds=$lt_[]_LT_AC_TAGVAR(archive_cmds, $1) +archive_expsym_cmds=$lt_[]_LT_AC_TAGVAR(archive_expsym_cmds, $1) +postinstall_cmds=$lt_postinstall_cmds +postuninstall_cmds=$lt_postuninstall_cmds + +# Commands to strip libraries. +old_striplib=$lt_old_striplib +striplib=$lt_striplib + +# Dependencies to place before the objects being linked to create a +# shared library. +predep_objects=$lt_[]_LT_AC_TAGVAR(predep_objects, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdep_objects=$lt_[]_LT_AC_TAGVAR(postdep_objects, $1) + +# Dependencies to place before the objects being linked to create a +# shared library. +predeps=$lt_[]_LT_AC_TAGVAR(predeps, $1) + +# Dependencies to place after the objects being linked to create a +# shared library. +postdeps=$lt_[]_LT_AC_TAGVAR(postdeps, $1) + +# The library search path used internally by the compiler when linking +# a shared library. +compiler_lib_search_path=$lt_[]_LT_AC_TAGVAR(compiler_lib_search_path, $1) + +# Method to check whether dependent libraries are shared objects. +deplibs_check_method=$lt_deplibs_check_method + +# Command to use when deplibs_check_method == file_magic. +file_magic_cmd=$lt_file_magic_cmd + +# Flag that allows shared libraries with undefined symbols to be built. +allow_undefined_flag=$lt_[]_LT_AC_TAGVAR(allow_undefined_flag, $1) + +# Flag that forces no undefined symbols. +no_undefined_flag=$lt_[]_LT_AC_TAGVAR(no_undefined_flag, $1) + +# Commands used to finish a libtool library installation in a directory. +finish_cmds=$lt_finish_cmds + +# Same as above, but a single script fragment to be evaled but not shown. +finish_eval=$lt_finish_eval + +# Take the output of nm and produce a listing of raw symbols and C names. +global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + +# Transform the output of nm in a proper C declaration +global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +# Transform the output of nm in a C name address pair +global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +# This is the shared library runtime path variable. +runpath_var=$runpath_var + +# This is the shared library path variable. +shlibpath_var=$shlibpath_var + +# Is shlibpath searched before the hard-coded library search path? +shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +# How to hardcode a shared library path into an executable. +hardcode_action=$_LT_AC_TAGVAR(hardcode_action, $1) + +# Whether we should hardcode library paths into libraries. +hardcode_into_libs=$hardcode_into_libs + +# Flag to hardcode \$libdir into a binary during linking. +# This must work even if \$libdir does not exist. +hardcode_libdir_flag_spec=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) + +# Whether we need a single -rpath flag with a separated argument. +hardcode_libdir_separator=$lt_[]_LT_AC_TAGVAR(hardcode_libdir_separator, $1) + +# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the +# resulting binary. +hardcode_direct=$_LT_AC_TAGVAR(hardcode_direct, $1) + +# Set to yes if using the -LDIR flag during linking hardcodes DIR into the +# resulting binary. +hardcode_minus_L=$_LT_AC_TAGVAR(hardcode_minus_L, $1) + +# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into +# the resulting binary. +hardcode_shlibpath_var=$_LT_AC_TAGVAR(hardcode_shlibpath_var, $1) + +# Variables whose values should be saved in libtool wrapper scripts and +# restored at relink time. +variables_saved_for_relink="$variables_saved_for_relink" + +# Whether libtool must link a program against all its dependency libraries. +link_all_deplibs=$_LT_AC_TAGVAR(link_all_deplibs, $1) + +# Compile-time system search path for libraries +sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +# Run-time system search path for libraries +sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +# Fix the shell variable \$srcfile for the compiler. +fix_srcfile_path="$_LT_AC_TAGVAR(fix_srcfile_path, $1)" + +# Set to yes if exported symbols are required. +always_export_symbols=$_LT_AC_TAGVAR(always_export_symbols, $1) + +# The commands to list exported symbols. +export_symbols_cmds=$lt_[]_LT_AC_TAGVAR(export_symbols_cmds, $1) + +# The commands to extract the exported symbol list from a shared archive. +extract_expsyms_cmds=$lt_extract_expsyms_cmds + +# Symbols that should not be listed in the preloaded symbols. +exclude_expsyms=$lt_[]_LT_AC_TAGVAR(exclude_expsyms, $1) + +# Symbols that must always be exported. +include_expsyms=$lt_[]_LT_AC_TAGVAR(include_expsyms, $1) + +ifelse([$1],[], +[# ### END LIBTOOL CONFIG], +[# ### END LIBTOOL TAG CONFIG: $tagname]) + +__EOF__ + +ifelse([$1],[], [ + case $host_os in + aix3*) + cat <<\EOF >> "$cfgfile" + +# AIX sometimes has problems with the GCC collect2 program. For some +# reason, if we set the COLLECT_NAMES environment variable, the problems +# vanish in a puff of smoke. +if test "X${COLLECT_NAMES+set}" != Xset; then + COLLECT_NAMES= + export COLLECT_NAMES +fi +EOF + ;; + + cygwin* | mingw* | pw32* | os2*) + cat <<'EOF' >> "$cfgfile" + # This is a source program that is used to create dlls on Windows + # Don't remove nor modify the starting and closing comments + _LT_AC_FILE_LTDLL_C + # This is a source program that is used to create import libraries + # on Windows for dlls which lack them. Don't remove nor modify the + # starting and closing comments + _LT_AC_FILE_IMPGEN_C +EOF + ;; + esac + + # We use sed instead of cat because bash on DJGPP gets confused if + # if finds mixed CR/LF and LF-only lines. Since sed operates in + # text mode, it properly converts lines to CR/LF. This bash problem + # is reportedly fixed, but why not run on old versions too? + sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) + + mv -f "$cfgfile" "$ofile" || \ + (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") + chmod +x "$ofile" +]) +else + # If there is no Makefile yet, we rely on a make rule to execute + # `config.status --recheck' to rerun these tests and create the + # libtool script then. + test -f Makefile && make "$ltmain" +fi +])# AC_LIBTOOL_CONFIG + + +# AC_LIBTOOL_PROG_COMPILER_NO_RTTI([TAGNAME]) +# ------------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_NO_RTTI], +[AC_REQUIRE([_LT_AC_SYS_COMPILER])dnl + +_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)= + +if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)=' -fno-builtin' + + AC_LIBTOOL_COMPILER_OPTION([if $compiler supports -fno-rtti -fno-exceptions], + lt_cv_prog_compiler_rtti_exceptions, + [-fno-rtti -fno-exceptions -c conftest.$ac_ext], [], + [_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1) -fno-rtti -fno-exceptions"]) +fi +])# AC_LIBTOOL_PROG_COMPILER_NO_RTTI + + +# AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE +# --------------------------------- +AC_DEFUN([AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE], +[AC_REQUIRE([AC_CANONICAL_HOST]) +AC_REQUIRE([AC_PROG_NM]) +AC_REQUIRE([AC_OBJEXT]) +# Check for command to grab the raw symbol name followed by C symbol from nm. +AC_MSG_CHECKING([command to parse $NM output from $compiler object]) +AC_CACHE_VAL([lt_cv_sys_global_symbol_pipe], +[ +# These are sane defaults that work on at least a few old systems. +# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +# Character class describing NM global symbol codes. +[symcode='[BCDEGRST]'] + +# Regexp to match symbols that can be accessed directly from C. +[sympat='\([_A-Za-z][_A-Za-z0-9]*\)'] + +# Transform the above into a raw symbol and a C symbol. +symxfrm='\1 \2\3 \3' + +# Transform an extracted symbol line into a proper C declaration +lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +# Transform an extracted symbol line into symbol name and symbol address +lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +# Define system-specific variables. +case $host_os in +aix*) + [symcode='[BCDT]'] + ;; +cygwin* | mingw* | pw32*) + [symcode='[ABCDGISTW]'] + ;; +hpux*) # Its linker distinguishes data from code symbols + if test "$host_cpu" = ia64; then + [symcode='[ABCDEGRST]'] + fi + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; +irix*) + [symcode='[BCDEGRST]'] + ;; +solaris* | sysv5*) + [symcode='[BDT]'] + ;; +sysv4) + [symcode='[DFNSTU]'] + ;; +esac + +# Handle CRLF in mingw tool chain +opt_cr= +case $host_os in +mingw*) + opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp + ;; +esac + +# If we're using GNU nm, then use its standard symbol codes. +if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then + [symcode='[ABCDGISTW]'] +fi + +# Try without a prefix undercore, then with it. +for ac_symprfx in "" "_"; do + + # Write the raw and C identifiers. +lt_cv_sys_global_symbol_pipe=["sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'"] + + # Check to see that the pipe works correctly. + pipe_works=no + + rm -f conftest* + cat > conftest.$ac_ext < $nlist) && test -s "$nlist"; then + # Try sorting and uniquifying the output. + if sort "$nlist" | uniq > "$nlist"T; then + mv -f "$nlist"T "$nlist" + else + rm -f "$nlist"T + fi + + # Make sure that we snagged all the symbols we need. + if egrep ' nm_test_var$' "$nlist" >/dev/null; then + if egrep ' nm_test_func$' "$nlist" >/dev/null; then + cat < conftest.$ac_ext +#ifdef __cplusplus +extern "C" { +#endif + +EOF + # Now generate the symbol file. + eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' + + cat <> conftest.$ac_ext +#if defined (__STDC__) && __STDC__ +# define lt_ptr_t void * +#else +# define lt_ptr_t char * +# define const +#endif + +/* The mapping between symbol names and symbols. */ +const struct { + const char *name; + lt_ptr_t address; +} +[lt_preloaded_symbols[] =] +{ +EOF + sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" >> conftest.$ac_ext + cat <<\EOF >> conftest.$ac_ext + {0, (lt_ptr_t) 0} +}; + +#ifdef __cplusplus +} +#endif +EOF + # Now try linking the two files. + mv conftest.$ac_objext conftstm.$ac_objext + lt_save_LIBS="$LIBS" + lt_save_CFLAGS="$CFLAGS" + LIBS="conftstm.$ac_objext" + CFLAGS="$CFLAGS$_LT_AC_TAGVAR(lt_prog_compiler_no_builtin_flag, $1)" + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext}; then + pipe_works=yes + fi + LIBS="$lt_save_LIBS" + CFLAGS="$lt_save_CFLAGS" + else + echo "cannot find nm_test_func in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot find nm_test_var in $nlist" >&AS_MESSAGE_LOG_FD + fi + else + echo "cannot run $lt_cv_sys_global_symbol_pipe" >&AS_MESSAGE_LOG_FD + fi + else + echo "$progname: failed program was:" >&AS_MESSAGE_LOG_FD + cat conftest.$ac_ext >&5 + fi + rm -f conftest* conftst* + + # Do not use the global_symbol_pipe unless it works. + if test "$pipe_works" = yes; then + break + else + lt_cv_sys_global_symbol_pipe= + fi +done +]) +if test -z "$lt_cv_sys_global_symbol_pipe"; then + lt_cv_sys_global_symbol_to_cdecl= +fi +if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then + AC_MSG_RESULT(failed) +else + AC_MSG_RESULT(ok) +fi +]) # AC_LIBTOOL_SYS_GLOBAL_SYMBOL_PIPE + + +# AC_LIBTOOL_PROG_COMPILER_PIC([TAGNAME]) +# --------------------------------------- +AC_DEFUN([AC_LIBTOOL_PROG_COMPILER_PIC], +[_LT_AC_TAGVAR(lt_prog_compiler_wl, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +_LT_AC_TAGVAR(lt_prog_compiler_static, $1)= + +ifelse([$1],[CXX],[ + # C++ specific cases for pic, static, wl, etc. + if test "$GXX" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + beos* | irix5* | irix6* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + cygwin* | mingw* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + *djgpp*) + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + hpux*) + # PIC is the default for IA64 HP-UX, but not for PA HP-UX. + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + fi + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + case $host_os in + aix4* | aix5*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + chorus*) + case $cc_basename in + cxch68) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; + dgux*) + case $cc_basename in + ec++) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + ghcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + freebsd*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + aCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; + *) + ;; + esac + ;; + irix5* | irix6*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. + ;; + *) + ;; + esac + ;; + linux*) + case $cc_basename in + KCC) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + cxx) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + lynxos*) + ;; + m88k*) + ;; + mvs*) + case $cc_basename in + cxx) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; + netbsd*) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in + KCC) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; + RCC) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + cxx) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + *) + ;; + esac + ;; + psos*) + ;; + sco*) + case $cc_basename in + CC) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + *) + ;; + esac + ;; + solaris*) + case $cc_basename in + CC) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; + gcx) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; + *) + ;; + esac + ;; + sunos4*) + case $cc_basename in + CC) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + lcc) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; + *) + ;; + esac + ;; + tandem*) + case $cc_basename in + NCC) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; + *) + ;; + esac + ;; + unixware*) + ;; + vxworks*) + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +], +[AC_MSG_CHECKING([for $compiler option to produce PIC]) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + + case $host_os in + aix*) + # All AIX code is PIC. + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + amigaos*) + # FIXME: we need at least 68020 code to build shared libraries, but + # adding the `-m68020' flag to GCC prevents building anything better, + # like `-m68040'. + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-m68020 -resident32 -malways-restore-a4' + ;; + + beos* | irix5* | irix6* | osf3* | osf4* | osf5*) + # PIC is the default for these OSes. + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + darwin* | rhapsody*) + # PIC is the default on this platform + # Common symbols not allowed in MH_DYLIB files + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + enable_shared=no + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic + fi + ;; + + hpux*) + # PIC is the default for IA64 HP-UX, but not for PA HP-UX. + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + fi + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; + esac + else + # PORTME Check for flag to pass linker flags through the system compiler. + case $host_os in + aix*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" = ia64; then + # AIX 5 now supports IA64 processor + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + else + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; + + cygwin* | mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being + # built for inclusion in a dll (and should export symbols for example). + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-DDLL_EXPORT' + ;; + + hpux9* | hpux10* | hpux11*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + # Is there a better lt_prog_compiler_static that works with the bundled CC? + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + ;; + + irix5* | irix6*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC (with -KPIC) is the default. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + newsos6) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + osf3* | osf4* | osf5*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All OSF/1 code is PIC. + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' + ;; + + solaris*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sunos4*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) + if test "x$host_vendor" = xsni; then + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-LD' + else + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + fi + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + sysv4*MP*) + if test -d /usr/nec ;then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kconform_pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + fi + ;; + + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + + *) + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)]) + +# +# Check to make sure the PIC flag actually works. +# +if test -n "$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)"; then + AC_LIBTOOL_COMPILER_OPTION([if $compiler PIC flag $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) works], + _LT_AC_TAGVAR(lt_prog_compiler_pic_works, $1), + [$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC], [], + [case $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) in + "" | " "*) ;; + *) _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=" $_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)" ;; + esac], + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) +fi +case "$host_os" in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; + *) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) -DPIC" + ;; +esac +]) + + +# AC_LIBTOOL_PROG_LD_SHLIBS([TAGNAME]) +# ------------------------------------ +# See if the linker supports building shared libraries. +AC_DEFUN([AC_LIBTOOL_PROG_LD_SHLIBS], +[AC_MSG_CHECKING([whether the $compiler linker ($LD) supports shared libraries]) +ifelse([$1],[CXX],[],[ + runpath_var= + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + + _LT_AC_TAGVAR(archive_cmds, $1)= + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)= + _LT_AC_TAGVAR(archive_expsym_cmds, $1)= + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)= + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)= + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + _LT_AC_TAGVAR(thread_safe_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(link_all_deplibs, $1)=unknown + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' + # include_expsyms should be a list of space-separated symbols to be *always* + # included in the symbol list + _LT_AC_TAGVAR(include_expsyms, $1)= + # exclude_expsyms can be an egrep regular expression of symbols to exclude + # it will be wrapped by ` (' and `)$', so one must not match beginning or + # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', + # as well as any symbol that contains `d'. + _LT_AC_TAGVAR(exclude_expsyms, $1)="_GLOBAL_OFFSET_TABLE_" + # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out + # platforms (ab)use it in PIC code, but their linkers get confused if + # the symbol is explicitly referenced. Since portable code cannot + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= + + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + if test "$GCC" != yes; then + with_gnu_ld=no + fi + ;; + openbsd*) + with_gnu_ld=no + ;; + esac + + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + if test "$with_gnu_ld" = yes; then + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) + # On AIX/PPC, the GNU linker is very broken + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: the GNU linker, at least up to release 2.9.1, is reported +*** to be unable to reliably create shared libraries on AIX. +*** Therefore, libtool is disabling shared libraries support. If you +*** really care for shared libraries, you may want to modify your PATH +*** so that a non-GNU linker is found, and then restart. + +EOF + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + + # Samuel A. Falvo II reports + # that the semantics of dynamic libraries on AmigaOS, at least up + # to version 4, is to share data among multiple programs linked + # with the same dynamic library. Since this doesn't match the + # behavior of shared libraries on other platforms, we can't use + # them. + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + beos*) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Joseph Beckenbach says some releases of gcc + # support --undefined. This deserves some investigation. FIXME + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + cygwin* | mingw* | pw32*) + # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1) is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + + extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ + sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ + test -f $output_objdir/impgen.exe || (cd $output_objdir && \ + if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ + else $CC -o impgen impgen.c ; fi)~ + $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' + + _LT_AC_TAGVAR(old_archive_from_expsyms_cmds, $1)='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' + + # cygwin and mingw dlls have different entry points and sets of symbols + # to exclude. + # FIXME: what about values for MSVC? + dll_entry=__cygwin_dll_entry@12 + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ + case $host_os in + mingw*) + # mingw values + dll_entry=_DllMainCRTStartup@12 + dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ + ;; + esac + + # mingw and cygwin differ, and it's simplest to just exclude the union + # of the two symbol sets. + dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 + + # recent cygwin and mingw systems supply a stub DllMain which the user + # can override, but on older systems we have to supply one (in ltdll.c) + if test "x$lt_cv_need_dllmain" = "xyes"; then + ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " + ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ + test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' + else + ltdll_obj= + ltdll_cmds= + fi + + # Extract the symbol export list from an `--export-all' def file, + # then regenerate the def file from the symbol export list, so that + # the compiled dll only exports the symbol export list. + # Be careful not to strip the DATA tag left by newer dlltools. + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds"' + $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ + [sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//"] < $output_objdir/$soname-def > $export_symbols' + + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is. + # If DATA tags from a recent dlltool are present, honour them! + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`head -1 $export_symbols`" = xEXPORTS; then + cp $export_symbols $output_objdir/$soname-def; + else + echo EXPORTS > $output_objdir/$soname-def; + _lt_hint=1; + cat $export_symbols | while read symbol; do + set dummy \$symbol; + case \[$]# in + 2) echo " \[$]2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; + *) echo " \[$]2 @ \$_lt_hint \[$]3 ; " >> $output_objdir/$soname-def;; + esac; + _lt_hint=`expr 1 + \$_lt_hint`; + done; + fi~ + '"$ltdll_cmds"' + $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ + $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ + $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ + $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' + ;; + + darwin* | rhapsody*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' + # FIXME: Relying on posixy $() will cause problems for + # cross-compilation, but unfortunately the echo tests do not + # yet detect zsh echo's removal of \ escapes. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib $libobjs $deplibs$linkopts -install_name $rpath/$soname $(test -n "$verstring" -a x$verstring != x0.0 && echo $verstring)' + # We need to add '_' to the symbols in $export_symbols first + #_LT_AC_TAGVAR(archive_expsym_cmds, $1)="$_LT_AC_TAGVAR(archive_cmds, $1)"' && strip -s $export_symbols' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + fi + ;; + + solaris* | sysv5*) + if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 + +*** Warning: The releases 2.8.* of the GNU linker cannot reliably +*** create shared libraries on Solaris systems. Therefore, libtool +*** is disabling shared libraries support. We urge you to upgrade GNU +*** binutils to release 2.9.1 or newer. Another option is to modify +*** your PATH or compiler configuration so that the native linker is +*** used, and then restart. + +EOF + elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + esac + + if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then + runpath_var=LD_RUN_PATH + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + case $host_os in + cygwin* | mingw* | pw32*) + # dlltool doesn't understand --whole-archive et. al. + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + ;; + *) + # ancient GNU ld didn't support --whole-archive et. al. + if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' + else + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + ;; + esac + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) + case $host_os in + aix3*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + if test "$GCC" = yes && test -z "$link_static_flag"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + fi + ;; + + aix4* | aix5*) + if test "$host_cpu" = ia64; then + # On IA64, the linker does run time linking by default, so we don't + # have to do anything special. + aix_use_runtimelinking=no + exp_sym_flag='-Bexport' + no_entry_flag="" + else + aix_use_runtimelinking=no + + # Test if we are trying to use run time linking or normal + # AIX style linking. If -brtl is somewhere in LDFLAGS, we + # need to do runtime linking. + case $host_os in aix4.[[23]]|aix4.[[23]].*|aix5*) + for ld_flag in $LDFLAGS; do + if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then + aix_use_runtimelinking=yes + break + fi + done + esac + + exp_sym_flag='-bexport' + no_entry_flag='-bnoentry' + fi + + # When large executables or shared objects are built, AIX ld can + # have problems creating the table of contents. If linking a library + # or program results in "error TOC overflow" add -mminimal-toc to + # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not + # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. + + _LT_AC_TAGVAR(archive_cmds, $1)='' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then + case $host_os in aix4.[012]|aix4.[012].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` + if test -f "$collect2name" && \ + strings "$collect2name" | grep resolve_lib_name >/dev/null + then + # We have reworked collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + else + # We have old collect2 + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported + # It fails to find uninstalled libraries when the uninstalled + # path is not listed in the libpath. Setting hardcode_minus_L + # to unsupported forces relinking + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi + esac + shared_flag='-shared' + else + # not using gcc + if test "$host_cpu" = ia64; then + # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else + if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' + fi + fi + fi + + # It seems that -bexpall does not export symbols beginning with + # underscore (_), so it is better to generate a list of symbols to export. + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + if test "$aix_use_runtimelinking" = yes; then + # Warning - without using the other runtime loading flags (-brtl), + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(allow_undefined_flag, $1)='-berok' + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + # Warning - without using the other run time loading flags, + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' + # -bexpall does not export symbols beginning with underscore (_) + _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + # This is similar to how AIX traditionally builds it's shared libraries. + _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; + + amigaos*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + # see comment about different semantics on the GNU ld section + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + bsdi4*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + + cygwin* | mingw* | pw32*) + # When not using gcc, we currently assume that we are using + # Microsoft Visual C++. + # hardcode_libdir_flag_spec is actually meaningless, as there is + # no search path for DLLs. + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)=' ' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + # Tell ltmain to make .lib files, not .a files. + libext=lib + # FIXME: Setting linknames here is a bad hack. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' + # The linker will automatically build a .lib file if we build a DLL. + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' + fix_srcfile_path='`cygpath -w "$srcfile"`' + ;; + + dgux*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + freebsd1*) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + + # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor + # support. Future versions do this automatically, but an explicit c++rt0.o + # does not break anything, and helps significantly (at the cost of a little + # extra space). + freebsd2.2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # Unfortunately, older versions of FreeBSD 2 do not have this feature. + freebsd2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. + freebsd*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + hpux9* | hpux10* | hpux11*) + if test $GXX = yes; then + case $host_os in + hpux9*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + ;; + *) + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + fi + ;; + esac + else + case $host_os in + hpux9*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + ;; + *) + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' + fi + ;; + esac + fi + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + else + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + fi + # hardcode_minus_L: Not really in the search PATH, + # but as the default location of the library. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + + irix5* | irix6*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + netbsd*) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + newsos6) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linkopts' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + openbsd*) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + + case "$host_os" in + openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + if [ "`echo __ELF__ | $CC -E - | grep __ELF__`" = "" -o "$host_os-$host_cpu" = "openbsd2.8-powerpc" ]; then + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + fi + ;; + esac + ;; + + os2*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(archive_cmds, $1)='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' + ;; + + osf3*) + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + osf4* | osf5*) # as osf3* with the addition of -msym flag + if test "$GCC" = yes; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + else + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ + $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' + fi + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + + sco3.2v5*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + ;; + + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z defs' + if test "$GXX" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + [solaris2.[0-5] | solaris2.[0-5].*]) ;; + *) # Supported since Solaris 2.6 (maybe 2.5.1?) + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + + sunos4*) + if test "x$host_vendor" = xsequent; then + # Use $CC to link under sequent, because it throws in some extra .o + # files that make .init and .fini sections work. + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' + fi + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4) + if test "x$host_vendor" = xsni; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -Bsymbolic -h $soname -o $lib $libobjs $deplibs $linkopts' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes # is this really true??? + else + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=no #Motorola manual says yes, but my tests say they lie + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv4.3*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='-Bexport' + ;; + + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var=LD_RUN_PATH + hardcode_runpath_var=yes + _LT_AC_TAGVAR(ld_shlibs, $1)=yes + fi + ;; + + sysv4.2uw2*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + hardcode_runpath_var=yes + runpath_var=LD_RUN_PATH + ;; + + sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) + _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + fi + runpath_var='LD_RUN_PATH' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + sysv5*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + # $CC -shared without GNU ld will not create a library from C++ + # object files and a static libstdc++, better avoid it by now + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + runpath_var='LD_RUN_PATH' + ;; + + uts4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + + *) + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + esac + fi +]) +AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) +test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +if test "$GCC" = yes; then + variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +fi + +# +# Do we need to explicitly link libc? +# +_LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +if test "$enable_shared" = yes && test "$GCC" = yes; then + case $_LT_AC_TAGVAR(archive_cmds, $1) in + *'~'*) + # FIXME: we may have to deal with multi-command sequences. + ;; + '$CC '*) + # Test whether the compiler implicitly links with -lc since on some + # systems, -lgcc has to come before -lc. If gcc already passes -lc + # to ld, don't add -lc before -lgcc. + AC_MSG_CHECKING([whether -lc should be explicitly linked in]) + $rm conftest* + echo 'static int dummy;' > conftest.$ac_ext + + if AC_TRY_EVAL(ac_compile) 2>conftest.err; then + soname=conftest + lib=conftest + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) + compiler_flags=-v + linker_flags=-v + verstring= + output_objdir=. + libname=conftest + lt_save_allow_undefined_flag=$_LT_AC_TAGVAR(allow_undefined_flag, $1) + _LT_AC_TAGVAR(allow_undefined_flag, $1)= + if AC_TRY_EVAL(_LT_AC_TAGVAR(archive_cmds, $1) 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) + then + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + else + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes + fi + _LT_AC_TAGVAR(allow_undefined_flag, $1)=$lt_save_allow_undefined_flag + else + cat conftest.err 1>&5 + fi + $rm conftest* + AC_MSG_RESULT([$_LT_AC_TAGVAR(archive_cmds_need_lc, $1)]) + ;; + esac +fi +])# AC_LIBTOOL_PROG_LD_SHLIBS + + +# _LT_AC_FILE_LTDLL_C +# ------------------- +AC_DEFUN([_LT_AC_FILE_LTDLL_C], +[# /* ltdll.c starts here */ +# #define WIN32_LEAN_AND_MEAN +# #include +# #undef WIN32_LEAN_AND_MEAN +# #include +# +# #ifndef __CYGWIN__ +# # ifdef __CYGWIN32__ +# # define __CYGWIN__ __CYGWIN32__ +# # endif +# #endif +# +# #ifdef __cplusplus +# extern "C" { +# #endif +# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +# #ifdef __cplusplus +# } +# #endif +# +# #ifdef __CYGWIN__ +# #include +# DECLARE_CYGWIN_DLL( DllMain ); +# #endif +# HINSTANCE __hDllInstance_base; +# +# BOOL APIENTRY +# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +# { +# __hDllInstance_base = hInst; +# return TRUE; +# } +# /* ltdll.c ends here */ +])# _LT_AC_FILE_LTDLL_C + + +# _LT_AC_FILE_IMPGEN_C +# -------------------- +AC_DEFUN([_LT_AC_FILE_IMPGEN_C], +[# /* impgen.c starts here */ +# /* Copyright (C) 1999, 2000, 2001 Free Software Foundation, Inc. +# +# This file is part of GNU libtool. +# +# This program is free software; you can redistribute it and/or modify +# it under the terms of the GNU General Public License as published by +# the Free Software Foundation; either version 2 of the License, or +# (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU General Public License for more details. +# +# You should have received a copy of the GNU General Public License +# along with this program; if not, write to the Free Software +# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +# */ +# +# #include /* for printf() */ +# #include /* for open(), lseek(), read() */ +# #include /* for O_RDONLY, O_BINARY */ +# #include /* for strdup() */ +# +# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +# #ifndef O_BINARY +# #define O_BINARY 0 +# #endif +# +# static unsigned int +# pe_get16 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[2]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 2); +# return b[0] + (b[1]<<8); +# } +# +# static unsigned int +# pe_get32 (fd, offset) +# int fd; +# int offset; +# { +# unsigned char b[4]; +# lseek (fd, offset, SEEK_SET); +# read (fd, b, 4); +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# static unsigned int +# pe_as32 (ptr) +# void *ptr; +# { +# unsigned char *b = ptr; +# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +# } +# +# int +# main (argc, argv) +# int argc; +# char *argv[]; +# { +# int dll; +# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +# unsigned long export_rva, export_size, nsections, secptr, expptr; +# unsigned long name_rvas, nexp; +# unsigned char *expdata, *erva; +# char *filename, *dll_name; +# +# filename = argv[1]; +# +# dll = open(filename, O_RDONLY|O_BINARY); +# if (dll < 1) +# return 1; +# +# dll_name = filename; +# +# for (i=0; filename[i]; i++) +# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +# dll_name = filename + i +1; +# +# pe_header_offset = pe_get32 (dll, 0x3c); +# opthdr_ofs = pe_header_offset + 4 + 20; +# num_entries = pe_get32 (dll, opthdr_ofs + 92); +# +# if (num_entries < 1) /* no exports */ +# return 1; +# +# export_rva = pe_get32 (dll, opthdr_ofs + 96); +# export_size = pe_get32 (dll, opthdr_ofs + 100); +# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +# secptr = (pe_header_offset + 4 + 20 + +# pe_get16 (dll, pe_header_offset + 4 + 16)); +# +# expptr = 0; +# for (i = 0; i < nsections; i++) +# { +# char sname[8]; +# unsigned long secptr1 = secptr + 40 * i; +# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +# lseek(dll, secptr1, SEEK_SET); +# read(dll, sname, 8); +# if (vaddr <= export_rva && vaddr+vsize > export_rva) +# { +# expptr = fptr + (export_rva - vaddr); +# if (export_rva + export_size > vaddr + vsize) +# export_size = vsize - (export_rva - vaddr); +# break; +# } +# } +# +# expdata = (unsigned char*)malloc(export_size); +# lseek (dll, expptr, SEEK_SET); +# read (dll, expdata, export_size); +# erva = expdata - export_rva; +# +# nexp = pe_as32 (expdata+24); +# name_rvas = pe_as32 (expdata+32); +# +# printf ("EXPORTS\n"); +# for (i = 0; i