ACPICA: create acpica/ directory

also, delete sleep/ and delete ACPI_CFLAGS from Makefile

Signed-off-by: Len Brown <len.brown@intel.com>

1 files changed, 0 insertions, 1469 deletions

diff --git a/drivers/acpi/dispatcher/dsopcode.c b/drivers/acpi/dispatcher/dsopcode.c
deleted file mode 100644
index cb8a0d3109f0..000000000000
--- a/drivers/acpi/dispatcher/dsopcode.c
+++ /dev/null
@@ -1,1469 +0,0 @@
-/******************************************************************************
- *
- * Module Name: dsopcode - Dispatcher Op Region support and handling of
- *                         "control" opcodes
- *
- *****************************************************************************/
-
-/*
- * Copyright (C) 2000 - 2008, Intel Corp.
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without
- * modification, are permitted provided that the following conditions
- * are met:
- * 1. Redistributions of source code must retain the above copyright
- *    notice, this list of conditions, and the following disclaimer,
- *    without modification.
- * 2. Redistributions in binary form must reproduce at minimum a disclaimer
- *    substantially similar to the "NO WARRANTY" disclaimer below
- *    ("Disclaimer") and any redistribution must be conditioned upon
- *    including a substantially similar Disclaimer requirement for further
- *    binary redistribution.
- * 3. Neither the names of the above-listed copyright holders nor the names
- *    of any contributors may be used to endorse or promote products derived
- *    from this software without specific prior written permission.
- *
- * Alternatively, this software may be distributed under the terms of the
- * GNU General Public License ("GPL") version 2 as published by the Free
- * Software Foundation.
- *
- * NO WARRANTY
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
- * "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
- * LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR
- * A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
- * HOLDERS OR CONTRIBUTORS BE LIABLE FOR SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
- * DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS
- * OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION)
- * HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING
- * IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
- * POSSIBILITY OF SUCH DAMAGES.
- */
-
-#include <acpi/acpi.h>
-#include <acpi/accommon.h>
-#include <acpi/acparser.h>
-#include <acpi/amlcode.h>
-#include <acpi/acdispat.h>
-#include <acpi/acinterp.h>
-#include <acpi/acnamesp.h>
-#include <acpi/acevents.h>
-#include <acpi/actables.h>
-
-#define _COMPONENT          ACPI_DISPATCHER
-ACPI_MODULE_NAME("dsopcode")
-
-/* Local prototypes */
-static acpi_status
-acpi_ds_execute_arguments(struct acpi_namespace_node *node,
-			  struct acpi_namespace_node *scope_node,
-			  u32 aml_length, u8 * aml_start);
-
-static acpi_status
-acpi_ds_init_buffer_field(u16 aml_opcode,
-			  union acpi_operand_object *obj_desc,
-			  union acpi_operand_object *buffer_desc,
-			  union acpi_operand_object *offset_desc,
-			  union acpi_operand_object *length_desc,
-			  union acpi_operand_object *result_desc);
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_execute_arguments
- *
- * PARAMETERS:  Node                - Object NS node
- *              scope_node          - Parent NS node
- *              aml_length          - Length of executable AML
- *              aml_start           - Pointer to the AML
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Late (deferred) execution of region or field arguments
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ds_execute_arguments(struct acpi_namespace_node *node,
-			  struct acpi_namespace_node *scope_node,
-			  u32 aml_length, u8 * aml_start)
-{
-	acpi_status status;
-	union acpi_parse_object *op;
-	struct acpi_walk_state *walk_state;
-
-	ACPI_FUNCTION_TRACE(ds_execute_arguments);
-
-	/*
-	 * Allocate a new parser op to be the root of the parsed tree
-	 */
-	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
-	if (!op) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	/* Save the Node for use in acpi_ps_parse_aml */
-
-	op->common.node = scope_node;
-
-	/* Create and initialize a new parser state */
-
-	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
-	if (!walk_state) {
-		status = AE_NO_MEMORY;
-		goto cleanup;
-	}
-
-	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
-				       aml_length, NULL, ACPI_IMODE_LOAD_PASS1);
-	if (ACPI_FAILURE(status)) {
-		acpi_ds_delete_walk_state(walk_state);
-		goto cleanup;
-	}
-
-	/* Mark this parse as a deferred opcode */
-
-	walk_state->parse_flags = ACPI_PARSE_DEFERRED_OP;
-	walk_state->deferred_node = node;
-
-	/* Pass1: Parse the entire declaration */
-
-	status = acpi_ps_parse_aml(walk_state);
-	if (ACPI_FAILURE(status)) {
-		goto cleanup;
-	}
-
-	/* Get and init the Op created above */
-
-	op->common.node = node;
-	acpi_ps_delete_parse_tree(op);
-
-	/* Evaluate the deferred arguments */
-
-	op = acpi_ps_alloc_op(AML_INT_EVAL_SUBTREE_OP);
-	if (!op) {
-		return_ACPI_STATUS(AE_NO_MEMORY);
-	}
-
-	op->common.node = scope_node;
-
-	/* Create and initialize a new parser state */
-
-	walk_state = acpi_ds_create_walk_state(0, NULL, NULL, NULL);
-	if (!walk_state) {
-		status = AE_NO_MEMORY;
-		goto cleanup;
-	}
-
-	/* Execute the opcode and arguments */
-
-	status = acpi_ds_init_aml_walk(walk_state, op, NULL, aml_start,
-				       aml_length, NULL, ACPI_IMODE_EXECUTE);
-	if (ACPI_FAILURE(status)) {
-		acpi_ds_delete_walk_state(walk_state);
-		goto cleanup;
-	}
-
-	/* Mark this execution as a deferred opcode */
-
-	walk_state->deferred_node = node;
-	status = acpi_ps_parse_aml(walk_state);
-
-      cleanup:
-	acpi_ps_delete_parse_tree(op);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_buffer_field_arguments
- *
- * PARAMETERS:  obj_desc        - A valid buffer_field object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get buffer_field Buffer and Index. This implements the late
- *              evaluation of these field attributes.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_get_buffer_field_arguments(union acpi_operand_object *obj_desc)
-{
-	union acpi_operand_object *extra_desc;
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_field_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the AML pointer (method object) and buffer_field node */
-
-	extra_desc = acpi_ns_get_secondary_object(obj_desc);
-	node = obj_desc->buffer_field.node;
-
-	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
-			(ACPI_TYPE_BUFFER_FIELD, node, NULL));
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BufferField Arg Init\n",
-			  acpi_ut_get_node_name(node)));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
-					   extra_desc->extra.aml_length,
-					   extra_desc->extra.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_bank_field_arguments
- *
- * PARAMETERS:  obj_desc        - A valid bank_field object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get bank_field bank_value. This implements the late
- *              evaluation of these field attributes.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_get_bank_field_arguments(union acpi_operand_object *obj_desc)
-{
-	union acpi_operand_object *extra_desc;
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_bank_field_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the AML pointer (method object) and bank_field node */
-
-	extra_desc = acpi_ns_get_secondary_object(obj_desc);
-	node = obj_desc->bank_field.node;
-
-	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
-			(ACPI_TYPE_LOCAL_BANK_FIELD, node, NULL));
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] BankField Arg Init\n",
-			  acpi_ut_get_node_name(node)));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
-					   extra_desc->extra.aml_length,
-					   extra_desc->extra.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_buffer_arguments
- *
- * PARAMETERS:  obj_desc        - A valid Buffer object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get Buffer length and initializer byte list.  This implements
- *              the late evaluation of these attributes.
- *
- ******************************************************************************/
-
-acpi_status acpi_ds_get_buffer_arguments(union acpi_operand_object *obj_desc)
-{
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_buffer_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the Buffer node */
-
-	node = obj_desc->buffer.node;
-	if (!node) {
-		ACPI_ERROR((AE_INFO,
-			    "No pointer back to NS node in buffer obj %p",
-			    obj_desc));
-		return_ACPI_STATUS(AE_AML_INTERNAL);
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Buffer Arg Init\n"));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, node,
-					   obj_desc->buffer.aml_length,
-					   obj_desc->buffer.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_get_package_arguments
- *
- * PARAMETERS:  obj_desc        - A valid Package object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get Package length and initializer byte list.  This implements
- *              the late evaluation of these attributes.
- *
- ******************************************************************************/
-
-acpi_status acpi_ds_get_package_arguments(union acpi_operand_object *obj_desc)
-{
-	struct acpi_namespace_node *node;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_package_arguments, obj_desc);
-
-	if (obj_desc->common.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	/* Get the Package node */
-
-	node = obj_desc->package.node;
-	if (!node) {
-		ACPI_ERROR((AE_INFO,
-			    "No pointer back to NS node in package %p",
-			    obj_desc));
-		return_ACPI_STATUS(AE_AML_INTERNAL);
-	}
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "Package Arg Init\n"));
-
-	/* Execute the AML code for the term_arg arguments */
-
-	status = acpi_ds_execute_arguments(node, node,
-					   obj_desc->package.aml_length,
-					   obj_desc->package.aml_start);
-	return_ACPI_STATUS(status);
-}
-
-/*****************************************************************************
- *
- * FUNCTION:    acpi_ds_get_region_arguments
- *
- * PARAMETERS:  obj_desc        - A valid region object
- *
- * RETURN:      Status.
- *
- * DESCRIPTION: Get region address and length.  This implements the late
- *              evaluation of these region attributes.
- *
- ****************************************************************************/
-
-acpi_status acpi_ds_get_region_arguments(union acpi_operand_object *obj_desc)
-{
-	struct acpi_namespace_node *node;
-	acpi_status status;
-	union acpi_operand_object *extra_desc;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_get_region_arguments, obj_desc);
-
-	if (obj_desc->region.flags & AOPOBJ_DATA_VALID) {
-		return_ACPI_STATUS(AE_OK);
-	}
-
-	extra_desc = acpi_ns_get_secondary_object(obj_desc);
-	if (!extra_desc) {
-		return_ACPI_STATUS(AE_NOT_EXIST);
-	}
-
-	/* Get the Region node */
-
-	node = obj_desc->region.node;
-
-	ACPI_DEBUG_EXEC(acpi_ut_display_init_pathname
-			(ACPI_TYPE_REGION, node, NULL));
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "[%4.4s] OpRegion Arg Init at AML %p\n",
-			  acpi_ut_get_node_name(node),
-			  extra_desc->extra.aml_start));
-
-	/* Execute the argument AML */
-
-	status = acpi_ds_execute_arguments(node, acpi_ns_get_parent_node(node),
-					   extra_desc->extra.aml_length,
-					   extra_desc->extra.aml_start);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Validate the region address/length via the host OS */
-
-	status = acpi_os_validate_address(obj_desc->region.space_id,
-					  obj_desc->region.address,
-					  (acpi_size) obj_desc->region.length,
-					  acpi_ut_get_node_name(node));
-
-	if (ACPI_FAILURE(status)) {
-		/*
-		 * Invalid address/length. We will emit an error message and mark
-		 * the region as invalid, so that it will cause an additional error if
-		 * it is ever used. Then return AE_OK.
-		 */
-		ACPI_EXCEPTION((AE_INFO, status,
-				"During address validation of OpRegion [%4.4s]",
-				node->name.ascii));
-		obj_desc->common.flags |= AOPOBJ_INVALID;
-		status = AE_OK;
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_initialize_region
- *
- * PARAMETERS:  obj_handle      - Region namespace node
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Front end to ev_initialize_region
- *
- ******************************************************************************/
-
-acpi_status acpi_ds_initialize_region(acpi_handle obj_handle)
-{
-	union acpi_operand_object *obj_desc;
-	acpi_status status;
-
-	obj_desc = acpi_ns_get_attached_object(obj_handle);
-
-	/* Namespace is NOT locked */
-
-	status = acpi_ev_initialize_region(obj_desc, FALSE);
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_init_buffer_field
- *
- * PARAMETERS:  aml_opcode      - create_xxx_field
- *              obj_desc        - buffer_field object
- *              buffer_desc     - Host Buffer
- *              offset_desc     - Offset into buffer
- *              length_desc     - Length of field (CREATE_FIELD_OP only)
- *              result_desc     - Where to store the result
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Perform actual initialization of a buffer field
- *
- ******************************************************************************/
-
-static acpi_status
-acpi_ds_init_buffer_field(u16 aml_opcode,
-			  union acpi_operand_object *obj_desc,
-			  union acpi_operand_object *buffer_desc,
-			  union acpi_operand_object *offset_desc,
-			  union acpi_operand_object *length_desc,
-			  union acpi_operand_object *result_desc)
-{
-	u32 offset;
-	u32 bit_offset;
-	u32 bit_count;
-	u8 field_flags;
-	acpi_status status;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_init_buffer_field, obj_desc);
-
-	/* Host object must be a Buffer */
-
-	if (ACPI_GET_OBJECT_TYPE(buffer_desc) != ACPI_TYPE_BUFFER) {
-		ACPI_ERROR((AE_INFO,
-			    "Target of Create Field is not a Buffer object - %s",
-			    acpi_ut_get_object_type_name(buffer_desc)));
-
-		status = AE_AML_OPERAND_TYPE;
-		goto cleanup;
-	}
-
-	/*
-	 * The last parameter to all of these opcodes (result_desc) started
-	 * out as a name_string, and should therefore now be a NS node
-	 * after resolution in acpi_ex_resolve_operands().
-	 */
-	if (ACPI_GET_DESCRIPTOR_TYPE(result_desc) != ACPI_DESC_TYPE_NAMED) {
-		ACPI_ERROR((AE_INFO,
-			    "(%s) destination not a NS Node [%s]",
-			    acpi_ps_get_opcode_name(aml_opcode),
-			    acpi_ut_get_descriptor_name(result_desc)));
-
-		status = AE_AML_OPERAND_TYPE;
-		goto cleanup;
-	}
-
-	offset = (u32) offset_desc->integer.value;
-
-	/*
-	 * Setup the Bit offsets and counts, according to the opcode
-	 */
-	switch (aml_opcode) {
-	case AML_CREATE_FIELD_OP:
-
-		/* Offset is in bits, count is in bits */
-
-		field_flags = AML_FIELD_ACCESS_BYTE;
-		bit_offset = offset;
-		bit_count = (u32) length_desc->integer.value;
-
-		/* Must have a valid (>0) bit count */
-
-		if (bit_count == 0) {
-			ACPI_ERROR((AE_INFO,
-				    "Attempt to CreateField of length zero"));
-			status = AE_AML_OPERAND_VALUE;
-			goto cleanup;
-		}
-		break;
-
-	case AML_CREATE_BIT_FIELD_OP:
-
-		/* Offset is in bits, Field is one bit */
-
-		bit_offset = offset;
-		bit_count = 1;
-		field_flags = AML_FIELD_ACCESS_BYTE;
-		break;
-
-	case AML_CREATE_BYTE_FIELD_OP:
-
-		/* Offset is in bytes, field is one byte */
-
-		bit_offset = 8 * offset;
-		bit_count = 8;
-		field_flags = AML_FIELD_ACCESS_BYTE;
-		break;
-
-	case AML_CREATE_WORD_FIELD_OP:
-
-		/* Offset is in bytes, field is one word */
-
-		bit_offset = 8 * offset;
-		bit_count = 16;
-		field_flags = AML_FIELD_ACCESS_WORD;
-		break;
-
-	case AML_CREATE_DWORD_FIELD_OP:
-
-		/* Offset is in bytes, field is one dword */
-
-		bit_offset = 8 * offset;
-		bit_count = 32;
-		field_flags = AML_FIELD_ACCESS_DWORD;
-		break;
-
-	case AML_CREATE_QWORD_FIELD_OP:
-
-		/* Offset is in bytes, field is one qword */
-
-		bit_offset = 8 * offset;
-		bit_count = 64;
-		field_flags = AML_FIELD_ACCESS_QWORD;
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO,
-			    "Unknown field creation opcode %02x", aml_opcode));
-		status = AE_AML_BAD_OPCODE;
-		goto cleanup;
-	}
-
-	/* Entire field must fit within the current length of the buffer */
-
-	if ((bit_offset + bit_count) > (8 * (u32) buffer_desc->buffer.length)) {
-		ACPI_ERROR((AE_INFO,
-			    "Field [%4.4s] at %d exceeds Buffer [%4.4s] size %d (bits)",
-			    acpi_ut_get_node_name(result_desc),
-			    bit_offset + bit_count,
-			    acpi_ut_get_node_name(buffer_desc->buffer.node),
-			    8 * (u32) buffer_desc->buffer.length));
-		status = AE_AML_BUFFER_LIMIT;
-		goto cleanup;
-	}
-
-	/*
-	 * Initialize areas of the field object that are common to all fields
-	 * For field_flags, use LOCK_RULE = 0 (NO_LOCK),
-	 * UPDATE_RULE = 0 (UPDATE_PRESERVE)
-	 */
-	status = acpi_ex_prep_common_field_object(obj_desc, field_flags, 0,
-						  bit_offset, bit_count);
-	if (ACPI_FAILURE(status)) {
-		goto cleanup;
-	}
-
-	obj_desc->buffer_field.buffer_obj = buffer_desc;
-
-	/* Reference count for buffer_desc inherits obj_desc count */
-
-	buffer_desc->common.reference_count = (u16)
-	    (buffer_desc->common.reference_count +
-	     obj_desc->common.reference_count);
-
-      cleanup:
-
-	/* Always delete the operands */
-
-	acpi_ut_remove_reference(offset_desc);
-	acpi_ut_remove_reference(buffer_desc);
-
-	if (aml_opcode == AML_CREATE_FIELD_OP) {
-		acpi_ut_remove_reference(length_desc);
-	}
-
-	/* On failure, delete the result descriptor */
-
-	if (ACPI_FAILURE(status)) {
-		acpi_ut_remove_reference(result_desc);	/* Result descriptor */
-	} else {
-		/* Now the address and length are valid for this buffer_field */
-
-		obj_desc->buffer_field.flags |= AOPOBJ_DATA_VALID;
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_eval_buffer_field_operands
- *
- * PARAMETERS:  walk_state      - Current walk
- *              Op              - A valid buffer_field Op object
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get buffer_field Buffer and Index
- *              Called from acpi_ds_exec_end_op during buffer_field parse tree walk
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_eval_buffer_field_operands(struct acpi_walk_state *walk_state,
-				   union acpi_parse_object *op)
-{
-	acpi_status status;
-	union acpi_operand_object *obj_desc;
-	struct acpi_namespace_node *node;
-	union acpi_parse_object *next_op;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_eval_buffer_field_operands, op);
-
-	/*
-	 * This is where we evaluate the address and length fields of the
-	 * create_xxx_field declaration
-	 */
-	node = op->common.node;
-
-	/* next_op points to the op that holds the Buffer */
-
-	next_op = op->common.value.arg;
-
-	/* Evaluate/create the address and length operands */
-
-	status = acpi_ds_create_operands(walk_state, next_op);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	obj_desc = acpi_ns_get_attached_object(node);
-	if (!obj_desc) {
-		return_ACPI_STATUS(AE_NOT_EXIST);
-	}
-
-	/* Resolve the operands */
-
-	status = acpi_ex_resolve_operands(op->common.aml_opcode,
-					  ACPI_WALK_OPERANDS, walk_state);
-	if (ACPI_FAILURE(status)) {
-		ACPI_ERROR((AE_INFO, "(%s) bad operand(s) (%X)",
-			    acpi_ps_get_opcode_name(op->common.aml_opcode),
-			    status));
-
-		return_ACPI_STATUS(status);
-	}
-
-	/* Initialize the Buffer Field */
-
-	if (op->common.aml_opcode == AML_CREATE_FIELD_OP) {
-
-		/* NOTE: Slightly different operands for this opcode */
-
-		status =
-		    acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
-					      walk_state->operands[0],
-					      walk_state->operands[1],
-					      walk_state->operands[2],
-					      walk_state->operands[3]);
-	} else {
-		/* All other, create_xxx_field opcodes */
-
-		status =
-		    acpi_ds_init_buffer_field(op->common.aml_opcode, obj_desc,
-					      walk_state->operands[0],
-					      walk_state->operands[1], NULL,
-					      walk_state->operands[2]);
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_eval_region_operands
- *
- * PARAMETERS:  walk_state      - Current walk
- *              Op              - A valid region Op object
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get region address and length
- *              Called from acpi_ds_exec_end_op during op_region parse tree walk
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_eval_region_operands(struct acpi_walk_state *walk_state,
-			     union acpi_parse_object *op)
-{
-	acpi_status status;
-	union acpi_operand_object *obj_desc;
-	union acpi_operand_object *operand_desc;
-	struct acpi_namespace_node *node;
-	union acpi_parse_object *next_op;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_eval_region_operands, op);
-
-	/*
-	 * This is where we evaluate the address and length fields of the
-	 * op_region declaration
-	 */
-	node = op->common.node;
-
-	/* next_op points to the op that holds the space_iD */
-
-	next_op = op->common.value.arg;
-
-	/* next_op points to address op */
-
-	next_op = next_op->common.next;
-
-	/* Evaluate/create the address and length operands */
-
-	status = acpi_ds_create_operands(walk_state, next_op);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Resolve the length and address operands to numbers */
-
-	status = acpi_ex_resolve_operands(op->common.aml_opcode,
-					  ACPI_WALK_OPERANDS, walk_state);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	obj_desc = acpi_ns_get_attached_object(node);
-	if (!obj_desc) {
-		return_ACPI_STATUS(AE_NOT_EXIST);
-	}
-
-	/*
-	 * Get the length operand and save it
-	 * (at Top of stack)
-	 */
-	operand_desc = walk_state->operands[walk_state->num_operands - 1];
-
-	obj_desc->region.length = (u32) operand_desc->integer.value;
-	acpi_ut_remove_reference(operand_desc);
-
-	/*
-	 * Get the address and save it
-	 * (at top of stack - 1)
-	 */
-	operand_desc = walk_state->operands[walk_state->num_operands - 2];
-
-	obj_desc->region.address = (acpi_physical_address)
-	    operand_desc->integer.value;
-	acpi_ut_remove_reference(operand_desc);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
-			  obj_desc,
-			  ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
-			  obj_desc->region.length));
-
-	/* Now the address and length are valid for this opregion */
-
-	obj_desc->region.flags |= AOPOBJ_DATA_VALID;
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_eval_table_region_operands
- *
- * PARAMETERS:  walk_state      - Current walk
- *              Op              - A valid region Op object
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get region address and length
- *              Called from acpi_ds_exec_end_op during data_table_region parse tree walk
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_eval_table_region_operands(struct acpi_walk_state *walk_state,
-				   union acpi_parse_object *op)
-{
-	acpi_status status;
-	union acpi_operand_object *obj_desc;
-	union acpi_operand_object **operand;
-	struct acpi_namespace_node *node;
-	union acpi_parse_object *next_op;
-	u32 table_index;
-	struct acpi_table_header *table;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_eval_table_region_operands, op);
-
-	/*
-	 * This is where we evaluate the signature_string and oem_iDString
-	 * and oem_table_iDString of the data_table_region declaration
-	 */
-	node = op->common.node;
-
-	/* next_op points to signature_string op */
-
-	next_op = op->common.value.arg;
-
-	/*
-	 * Evaluate/create the signature_string and oem_iDString
-	 * and oem_table_iDString operands
-	 */
-	status = acpi_ds_create_operands(walk_state, next_op);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/*
-	 * Resolve the signature_string and oem_iDString
-	 * and oem_table_iDString operands
-	 */
-	status = acpi_ex_resolve_operands(op->common.aml_opcode,
-					  ACPI_WALK_OPERANDS, walk_state);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	operand = &walk_state->operands[0];
-
-	/* Find the ACPI table */
-
-	status = acpi_tb_find_table(operand[0]->string.pointer,
-				    operand[1]->string.pointer,
-				    operand[2]->string.pointer, &table_index);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	acpi_ut_remove_reference(operand[0]);
-	acpi_ut_remove_reference(operand[1]);
-	acpi_ut_remove_reference(operand[2]);
-
-	status = acpi_get_table_by_index(table_index, &table);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	obj_desc = acpi_ns_get_attached_object(node);
-	if (!obj_desc) {
-		return_ACPI_STATUS(AE_NOT_EXIST);
-	}
-
-	obj_desc->region.address =
-	    (acpi_physical_address) ACPI_TO_INTEGER(table);
-	obj_desc->region.length = table->length;
-
-	ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "RgnObj %p Addr %8.8X%8.8X Len %X\n",
-			  obj_desc,
-			  ACPI_FORMAT_NATIVE_UINT(obj_desc->region.address),
-			  obj_desc->region.length));
-
-	/* Now the address and length are valid for this opregion */
-
-	obj_desc->region.flags |= AOPOBJ_DATA_VALID;
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_eval_data_object_operands
- *
- * PARAMETERS:  walk_state      - Current walk
- *              Op              - A valid data_object Op object
- *              obj_desc        - data_object
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get the operands and complete the following data object types:
- *              Buffer, Package.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_eval_data_object_operands(struct acpi_walk_state *walk_state,
-				  union acpi_parse_object *op,
-				  union acpi_operand_object *obj_desc)
-{
-	acpi_status status;
-	union acpi_operand_object *arg_desc;
-	u32 length;
-
-	ACPI_FUNCTION_TRACE(ds_eval_data_object_operands);
-
-	/* The first operand (for all of these data objects) is the length */
-
-	/*
-	 * Set proper index into operand stack for acpi_ds_obj_stack_push
-	 * invoked inside acpi_ds_create_operand.
-	 */
-	walk_state->operand_index = walk_state->num_operands;
-
-	status = acpi_ds_create_operand(walk_state, op->common.value.arg, 1);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	status = acpi_ex_resolve_operands(walk_state->opcode,
-					  &(walk_state->
-					    operands[walk_state->num_operands -
-						     1]), walk_state);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	/* Extract length operand */
-
-	arg_desc = walk_state->operands[walk_state->num_operands - 1];
-	length = (u32) arg_desc->integer.value;
-
-	/* Cleanup for length operand */
-
-	status = acpi_ds_obj_stack_pop(1, walk_state);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	acpi_ut_remove_reference(arg_desc);
-
-	/*
-	 * Create the actual data object
-	 */
-	switch (op->common.aml_opcode) {
-	case AML_BUFFER_OP:
-
-		status =
-		    acpi_ds_build_internal_buffer_obj(walk_state, op, length,
-						      &obj_desc);
-		break;
-
-	case AML_PACKAGE_OP:
-	case AML_VAR_PACKAGE_OP:
-
-		status =
-		    acpi_ds_build_internal_package_obj(walk_state, op, length,
-						       &obj_desc);
-		break;
-
-	default:
-		return_ACPI_STATUS(AE_AML_BAD_OPCODE);
-	}
-
-	if (ACPI_SUCCESS(status)) {
-		/*
-		 * Return the object in the walk_state, unless the parent is a package -
-		 * in this case, the return object will be stored in the parse tree
-		 * for the package.
-		 */
-		if ((!op->common.parent) ||
-		    ((op->common.parent->common.aml_opcode != AML_PACKAGE_OP) &&
-		     (op->common.parent->common.aml_opcode !=
-		      AML_VAR_PACKAGE_OP)
-		     && (op->common.parent->common.aml_opcode != AML_NAME_OP))) {
-			walk_state->result_obj = obj_desc;
-		}
-	}
-
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_eval_bank_field_operands
- *
- * PARAMETERS:  walk_state      - Current walk
- *              Op              - A valid bank_field Op object
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Get bank_field bank_value
- *              Called from acpi_ds_exec_end_op during bank_field parse tree walk
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_eval_bank_field_operands(struct acpi_walk_state *walk_state,
-				 union acpi_parse_object *op)
-{
-	acpi_status status;
-	union acpi_operand_object *obj_desc;
-	union acpi_operand_object *operand_desc;
-	struct acpi_namespace_node *node;
-	union acpi_parse_object *next_op;
-	union acpi_parse_object *arg;
-
-	ACPI_FUNCTION_TRACE_PTR(ds_eval_bank_field_operands, op);
-
-	/*
-	 * This is where we evaluate the bank_value field of the
-	 * bank_field declaration
-	 */
-
-	/* next_op points to the op that holds the Region */
-
-	next_op = op->common.value.arg;
-
-	/* next_op points to the op that holds the Bank Register */
-
-	next_op = next_op->common.next;
-
-	/* next_op points to the op that holds the Bank Value */
-
-	next_op = next_op->common.next;
-
-	/*
-	 * Set proper index into operand stack for acpi_ds_obj_stack_push
-	 * invoked inside acpi_ds_create_operand.
-	 *
-	 * We use walk_state->Operands[0] to store the evaluated bank_value
-	 */
-	walk_state->operand_index = 0;
-
-	status = acpi_ds_create_operand(walk_state, next_op, 0);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	status = acpi_ex_resolve_to_value(&walk_state->operands[0], walk_state);
-	if (ACPI_FAILURE(status)) {
-		return_ACPI_STATUS(status);
-	}
-
-	ACPI_DUMP_OPERANDS(ACPI_WALK_OPERANDS,
-			   acpi_ps_get_opcode_name(op->common.aml_opcode), 1);
-	/*
-	 * Get the bank_value operand and save it
-	 * (at Top of stack)
-	 */
-	operand_desc = walk_state->operands[0];
-
-	/* Arg points to the start Bank Field */
-
-	arg = acpi_ps_get_arg(op, 4);
-	while (arg) {
-
-		/* Ignore OFFSET and ACCESSAS terms here */
-
-		if (arg->common.aml_opcode == AML_INT_NAMEDFIELD_OP) {
-			node = arg->common.node;
-
-			obj_desc = acpi_ns_get_attached_object(node);
-			if (!obj_desc) {
-				return_ACPI_STATUS(AE_NOT_EXIST);
-			}
-
-			obj_desc->bank_field.value =
-			    (u32) operand_desc->integer.value;
-		}
-
-		/* Move to next field in the list */
-
-		arg = arg->common.next;
-	}
-
-	acpi_ut_remove_reference(operand_desc);
-	return_ACPI_STATUS(status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_exec_begin_control_op
- *
- * PARAMETERS:  walk_list       - The list that owns the walk stack
- *              Op              - The control Op
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Handles all control ops encountered during control method
- *              execution.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_exec_begin_control_op(struct acpi_walk_state *walk_state,
-			      union acpi_parse_object *op)
-{
-	acpi_status status = AE_OK;
-	union acpi_generic_state *control_state;
-
-	ACPI_FUNCTION_NAME(ds_exec_begin_control_op);
-
-	ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "Op=%p Opcode=%2.2X State=%p\n", op,
-			  op->common.aml_opcode, walk_state));
-
-	switch (op->common.aml_opcode) {
-	case AML_WHILE_OP:
-
-		/*
-		 * If this is an additional iteration of a while loop, continue.
-		 * There is no need to allocate a new control state.
-		 */
-		if (walk_state->control_state) {
-			if (walk_state->control_state->control.aml_predicate_start
-				== (walk_state->parser_state.aml - 1)) {
-
-				/* Reset the state to start-of-loop */
-
-				walk_state->control_state->common.state =
-				    ACPI_CONTROL_CONDITIONAL_EXECUTING;
-				break;
-			}
-		}
-
-		/*lint -fallthrough */
-
-	case AML_IF_OP:
-
-		/*
-		 * IF/WHILE: Create a new control state to manage these
-		 * constructs. We need to manage these as a stack, in order
-		 * to handle nesting.
-		 */
-		control_state = acpi_ut_create_control_state();
-		if (!control_state) {
-			status = AE_NO_MEMORY;
-			break;
-		}
-		/*
-		 * Save a pointer to the predicate for multiple executions
-		 * of a loop
-		 */
-		control_state->control.aml_predicate_start =
-		    walk_state->parser_state.aml - 1;
-		control_state->control.package_end =
-		    walk_state->parser_state.pkg_end;
-		control_state->control.opcode = op->common.aml_opcode;
-
-		/* Push the control state on this walk's control stack */
-
-		acpi_ut_push_generic_state(&walk_state->control_state,
-					   control_state);
-		break;
-
-	case AML_ELSE_OP:
-
-		/* Predicate is in the state object */
-		/* If predicate is true, the IF was executed, ignore ELSE part */
-
-		if (walk_state->last_predicate) {
-			status = AE_CTRL_TRUE;
-		}
-
-		break;
-
-	case AML_RETURN_OP:
-
-		break;
-
-	default:
-		break;
-	}
-
-	return (status);
-}
-
-/*******************************************************************************
- *
- * FUNCTION:    acpi_ds_exec_end_control_op
- *
- * PARAMETERS:  walk_list       - The list that owns the walk stack
- *              Op              - The control Op
- *
- * RETURN:      Status
- *
- * DESCRIPTION: Handles all control ops encountered during control method
- *              execution.
- *
- ******************************************************************************/
-
-acpi_status
-acpi_ds_exec_end_control_op(struct acpi_walk_state * walk_state,
-			    union acpi_parse_object * op)
-{
-	acpi_status status = AE_OK;
-	union acpi_generic_state *control_state;
-
-	ACPI_FUNCTION_NAME(ds_exec_end_control_op);
-
-	switch (op->common.aml_opcode) {
-	case AML_IF_OP:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[IF_OP] Op=%p\n", op));
-
-		/*
-		 * Save the result of the predicate in case there is an
-		 * ELSE to come
-		 */
-		walk_state->last_predicate =
-		    (u8) walk_state->control_state->common.value;
-
-		/*
-		 * Pop the control state that was created at the start
-		 * of the IF and free it
-		 */
-		control_state =
-		    acpi_ut_pop_generic_state(&walk_state->control_state);
-		acpi_ut_delete_generic_state(control_state);
-		break;
-
-	case AML_ELSE_OP:
-
-		break;
-
-	case AML_WHILE_OP:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH, "[WHILE_OP] Op=%p\n", op));
-
-		control_state = walk_state->control_state;
-		if (control_state->common.value) {
-
-			/* Predicate was true, the body of the loop was just executed */
-
-			/*
-			 * This loop counter mechanism allows the interpreter to escape
-			 * possibly infinite loops. This can occur in poorly written AML
-			 * when the hardware does not respond within a while loop and the
-			 * loop does not implement a timeout.
-			 */
-			control_state->control.loop_count++;
-			if (control_state->control.loop_count >
-				ACPI_MAX_LOOP_ITERATIONS) {
-				status = AE_AML_INFINITE_LOOP;
-				break;
-			}
-
-			/*
-			 * Go back and evaluate the predicate and maybe execute the loop
-			 * another time
-			 */
-			status = AE_CTRL_PENDING;
-			walk_state->aml_last_while =
-			    control_state->control.aml_predicate_start;
-			break;
-		}
-
-		/* Predicate was false, terminate this while loop */
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "[WHILE_OP] termination! Op=%p\n", op));
-
-		/* Pop this control state and free it */
-
-		control_state =
-		    acpi_ut_pop_generic_state(&walk_state->control_state);
-		acpi_ut_delete_generic_state(control_state);
-		break;
-
-	case AML_RETURN_OP:
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "[RETURN_OP] Op=%p Arg=%p\n", op,
-				  op->common.value.arg));
-
-		/*
-		 * One optional operand -- the return value
-		 * It can be either an immediate operand or a result that
-		 * has been bubbled up the tree
-		 */
-		if (op->common.value.arg) {
-
-			/* Since we have a real Return(), delete any implicit return */
-
-			acpi_ds_clear_implicit_return(walk_state);
-
-			/* Return statement has an immediate operand */
-
-			status =
-			    acpi_ds_create_operands(walk_state,
-						    op->common.value.arg);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
-
-			/*
-			 * If value being returned is a Reference (such as
-			 * an arg or local), resolve it now because it may
-			 * cease to exist at the end of the method.
-			 */
-			status =
-			    acpi_ex_resolve_to_value(&walk_state->operands[0],
-						     walk_state);
-			if (ACPI_FAILURE(status)) {
-				return (status);
-			}
-
-			/*
-			 * Get the return value and save as the last result
-			 * value.  This is the only place where walk_state->return_desc
-			 * is set to anything other than zero!
-			 */
-			walk_state->return_desc = walk_state->operands[0];
-		} else if (walk_state->result_count) {
-
-			/* Since we have a real Return(), delete any implicit return */
-
-			acpi_ds_clear_implicit_return(walk_state);
-
-			/*
-			 * The return value has come from a previous calculation.
-			 *
-			 * If value being returned is a Reference (such as
-			 * an arg or local), resolve it now because it may
-			 * cease to exist at the end of the method.
-			 *
-			 * Allow references created by the Index operator to return unchanged.
-			 */
-			if ((ACPI_GET_DESCRIPTOR_TYPE
-			     (walk_state->results->results.obj_desc[0]) ==
-			     ACPI_DESC_TYPE_OPERAND)
-			    &&
-			    (ACPI_GET_OBJECT_TYPE
-			     (walk_state->results->results.obj_desc[0]) ==
-			     ACPI_TYPE_LOCAL_REFERENCE)
-			    && ((walk_state->results->results.obj_desc[0])->
-				reference.class != ACPI_REFCLASS_INDEX)) {
-				status =
-				    acpi_ex_resolve_to_value(&walk_state->
-							     results->results.
-							     obj_desc[0],
-							     walk_state);
-				if (ACPI_FAILURE(status)) {
-					return (status);
-				}
-			}
-
-			walk_state->return_desc =
-			    walk_state->results->results.obj_desc[0];
-		} else {
-			/* No return operand */
-
-			if (walk_state->num_operands) {
-				acpi_ut_remove_reference(walk_state->
-							 operands[0]);
-			}
-
-			walk_state->operands[0] = NULL;
-			walk_state->num_operands = 0;
-			walk_state->return_desc = NULL;
-		}
-
-		ACPI_DEBUG_PRINT((ACPI_DB_DISPATCH,
-				  "Completed RETURN_OP State=%p, RetVal=%p\n",
-				  walk_state, walk_state->return_desc));
-
-		/* End the control method execution right now */
-
-		status = AE_CTRL_TERMINATE;
-		break;
-
-	case AML_NOOP_OP:
-
-		/* Just do nothing! */
-		break;
-
-	case AML_BREAK_POINT_OP:
-
-		/* Call up to the OS service layer to handle this */
-
-		status =
-		    acpi_os_signal(ACPI_SIGNAL_BREAKPOINT,
-				   "Executed AML Breakpoint opcode");
-
-		/* If and when it returns, all done. */
-
-		break;
-
-	case AML_BREAK_OP:
-	case AML_CONTINUE_OP:	/* ACPI 2.0 */
-
-		/* Pop and delete control states until we find a while */
-
-		while (walk_state->control_state &&
-		       (walk_state->control_state->control.opcode !=
-			AML_WHILE_OP)) {
-			control_state =
-			    acpi_ut_pop_generic_state(&walk_state->
-						      control_state);
-			acpi_ut_delete_generic_state(control_state);
-		}
-
-		/* No while found? */
-
-		if (!walk_state->control_state) {
-			return (AE_AML_NO_WHILE);
-		}
-
-		/* Was: walk_state->aml_last_while = walk_state->control_state->Control.aml_predicate_start; */
-
-		walk_state->aml_last_while =
-		    walk_state->control_state->control.package_end;
-
-		/* Return status depending on opcode */
-
-		if (op->common.aml_opcode == AML_BREAK_OP) {
-			status = AE_CTRL_BREAK;
-		} else {
-			status = AE_CTRL_CONTINUE;
-		}
-		break;
-
-	default:
-
-		ACPI_ERROR((AE_INFO, "Unknown control opcode=%X Op=%p",
-			    op->common.aml_opcode, op));
-
-		status = AE_AML_BAD_OPCODE;
-		break;
-	}
-
-	return (status);
-}