[SCSI] qlogicpti: Some cosmetic changes

Change a printk sequencing issue where <6> ... was coming up in the middle
of a line when scsi_add_host was being called.
Reduce the length of some printk messages and make the messages
more consistant. All cosmetic but it makes it easier to read as it
scrolles off the screen during boot.

Signed-off-by: Mark Fortescue <mark@mtfhpc.demon.co.uk>
Acked-by: David S. Miller <davem@davemloft.net>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

1 files changed, 29 insertions, 21 deletions

diff --git a/drivers/scsi/qlogicpti.c b/drivers/scsi/qlogicpti.c
index c4195ea869e9..594887205b0f 100644
--- a/drivers/scsi/qlogicpti.c
+++ b/drivers/scsi/qlogicpti.c
@@ -193,7 +193,8 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
 		cpu_relax();
 	}
 	if (!loop_count)
-		printk(KERN_EMERG "qlogicpti: mbox_command loop timeout #1\n");
+		printk(KERN_EMERG "qlogicpti%d: mbox_command loop timeout #1\n",
+		       qpti->qpti_id);
 
 	/* Write mailbox command registers. */
 	switch (mbox_param[param[0]] >> 4) {
@@ -224,8 +225,8 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
 	       (sbus_readw(qpti->qregs + HCCTRL) & HCCTRL_CRIRQ))
 		udelay(20);
 	if (!loop_count)
-		printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #2\n",
-		       param[0]);
+		printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #2\n",
+		       qpti->qpti_id, param[0]);
 
 	/* Wait for SBUS semaphore to get set. */
 	loop_count = DEFAULT_LOOP_COUNT;
@@ -238,16 +239,16 @@ static int qlogicpti_mbox_command(struct qlogicpti *qpti, u_short param[], int f
 			break;
 	}
 	if (!loop_count)
-		printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #3\n",
-		       param[0]);
+		printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #3\n",
+		       qpti->qpti_id, param[0]);
 
 	/* Wait for MBOX busy condition to go away. */
 	loop_count = DEFAULT_LOOP_COUNT;
 	while (--loop_count && (sbus_readw(qpti->qregs + MBOX0) == 0x04))
 		udelay(20);
 	if (!loop_count)
-		printk(KERN_EMERG "qlogicpti: mbox_command[%04x] loop timeout #4\n",
-		       param[0]);
+		printk(KERN_EMERG "qlogicpti%d: mbox_command[%04x] loop timeout #4\n",
+		       qpti->qpti_id, param[0]);
 
 	/* Read back output parameters. */
 	switch (mbox_param[param[0]] & 0xf) {
@@ -342,7 +343,8 @@ static int qlogicpti_reset_hardware(struct Scsi_Host *host)
 	while (--loop_count && ((sbus_readw(qpti->qregs + MBOX0) & 0xff) == 0x04))
 		udelay(20);
 	if (!loop_count)
-		printk(KERN_EMERG "qlogicpti: reset_hardware loop timeout\n");
+		printk(KERN_EMERG "qlogicpti%d: reset_hardware loop timeout\n",
+		       qpti->qpti_id);
 
 	sbus_writew(HCCTRL_PAUSE, qpti->qregs + HCCTRL);
 	set_sbus_cfg1(qpti);
@@ -721,12 +723,12 @@ static int __init qpti_register_irq(struct qlogicpti *qpti)
 			IRQF_SHARED, "Qlogic/PTI", qpti))
 		goto fail;
 
-	printk("qpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
+	printk("qlogicpti%d: IRQ %d ", qpti->qpti_id, qpti->irq);
 
 	return 0;
 
 fail:
-	printk("qpti%d: Cannot acquire irq line\n", qpti->qpti_id);
+	printk("qlogicpti%d: Cannot acquire irq line\n", qpti->qpti_id);
 	return -1;
 }
 
@@ -1210,7 +1212,7 @@ static int qlogicpti_return_status(struct Status_Entry *sts, int id)
 		host_status = DID_OK;
 		break;
 	      default:
-		printk(KERN_EMERG "qpti%d: unknown completion status 0x%04x\n",
+		printk(KERN_EMERG "qlogicpti%d: unknown completion status 0x%04x\n",
 		       id, sts->completion_status);
 		host_status = DID_ERROR;
 		break;
@@ -1329,8 +1331,8 @@ static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
 	u32 cmd_cookie;
 	int i;
 
-	printk(KERN_WARNING "qlogicpti : Aborting cmd for tgt[%d] lun[%d]\n",
-	       (int)Cmnd->device->id, (int)Cmnd->device->lun);
+	printk(KERN_WARNING "qlogicpti%d: Aborting cmd for tgt[%d] lun[%d]\n",
+	       qpti->qpti_id, (int)Cmnd->device->id, (int)Cmnd->device->lun);
 
 	qlogicpti_disable_irqs(qpti);
 
@@ -1348,7 +1350,8 @@ static int qlogicpti_abort(struct scsi_cmnd *Cmnd)
 	param[3] = cmd_cookie & 0xffff;
 	if (qlogicpti_mbox_command(qpti, param, 0) ||
 	    (param[0] != MBOX_COMMAND_COMPLETE)) {
-		printk(KERN_EMERG "qlogicpti : scsi abort failure: %x\n", param[0]);
+		printk(KERN_EMERG "qlogicpti%d: scsi abort failure: %x\n",
+		       qpti->qpti_id, param[0]);
 		return_status = FAILED;
 	}
 
@@ -1364,7 +1367,8 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
 	struct qlogicpti *qpti = (struct qlogicpti *) host->hostdata;
 	int return_status = SUCCESS;
 
-	printk(KERN_WARNING "qlogicpti : Resetting SCSI bus!\n");
+	printk(KERN_WARNING "qlogicpti%d: Resetting SCSI bus!\n",
+	       qpti->qpti_id);
 
 	qlogicpti_disable_irqs(qpti);
 
@@ -1372,7 +1376,8 @@ static int qlogicpti_reset(struct scsi_cmnd *Cmnd)
 	param[1] = qpti->host_param.bus_reset_delay;
 	if (qlogicpti_mbox_command(qpti, param, 0) ||
 	   (param[0] != MBOX_COMMAND_COMPLETE)) {
-		printk(KERN_EMERG "qlogicisp : scsi bus reset failure: %x\n", param[0]);
+		printk(KERN_EMERG "qlogicisp%d: scsi bus reset failure: %x\n",
+		       qpti->qpti_id, param[0]);
 		return_status = FAILED;
 	}
 
@@ -1454,22 +1459,25 @@ static int __devinit qpti_sbus_probe(struct of_device *dev, const struct of_devi
 	if (qlogicpti_reset_hardware(host))
 		goto fail_unmap_queues;
 
-	if (scsi_add_host(host, &dev->dev))
-		goto fail_unmap_queues;
-
 	printk("(Firmware v%d.%d.%d)", qpti->fware_majrev,
 	       qpti->fware_minrev, qpti->fware_micrev);
 
 	fcode = of_get_property(dp, "isp-fcode", NULL);
 	if (fcode && fcode[0])
-		printk("(Firmware %s)", fcode);
+		printk("(FCode %s)", fcode);
 	if (of_find_property(dp, "differential", NULL) != NULL)
 		qpti->differential = 1;
 			
-	printk (" [%s Wide, using %s interface]\n",
+	printk("\nqlogicpti%d: [%s Wide, using %s interface]\n",
+		qpti->qpti_id,
 		(qpti->ultra ? "Ultra" : "Fast"),
 		(qpti->differential ? "differential" : "single ended"));
 
+	if (scsi_add_host(host, &dev->dev)) {
+		printk("qlogicpti%d: Failed scsi_add_host\n", qpti->qpti_id);
+		goto fail_unmap_queues;
+	}
+
 	dev_set_drvdata(&sdev->ofdev.dev, qpti);
 
 	qpti_chain_add(qpti);