diff options
Diffstat (limited to 'arch/parisc/kernel/time.c')
| -rw-r--r-- | arch/parisc/kernel/time.c | 208 |
1 files changed, 139 insertions, 69 deletions
diff --git a/arch/parisc/kernel/time.c b/arch/parisc/kernel/time.c index ab641d67f551..b3496b592a2d 100644 --- a/arch/parisc/kernel/time.c +++ b/arch/parisc/kernel/time.c @@ -32,8 +32,7 @@ #include <linux/timex.h> -static long clocktick __read_mostly; /* timer cycles per tick */ -static long halftick __read_mostly; +static unsigned long clocktick __read_mostly; /* timer cycles per tick */ #ifdef CONFIG_SMP extern void smp_do_timer(struct pt_regs *regs); @@ -41,46 +40,106 @@ extern void smp_do_timer(struct pt_regs *regs); irqreturn_t timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { - long now; - long next_tick; - int nticks; - int cpu = smp_processor_id(); + unsigned long now; + unsigned long next_tick; + unsigned long cycles_elapsed; + unsigned long cycles_remainder; + unsigned int cpu = smp_processor_id(); + + /* gcc can optimize for "read-only" case with a local clocktick */ + unsigned long cpt = clocktick; profile_tick(CPU_PROFILING, regs); - now = mfctl(16); - /* initialize next_tick to time at last clocktick */ + /* Initialize next_tick to the expected tick time. */ next_tick = cpu_data[cpu].it_value; - /* since time passes between the interrupt and the mfctl() - * above, it is never true that last_tick + clocktick == now. If we - * never miss a clocktick, we could set next_tick = last_tick + clocktick - * but maybe we'll miss ticks, hence the loop. - * - * Variables are *signed*. + /* Get current interval timer. + * CR16 reads as 64 bits in CPU wide mode. + * CR16 reads as 32 bits in CPU narrow mode. */ + now = mfctl(16); + + cycles_elapsed = now - next_tick; - nticks = 0; - while((next_tick - now) < halftick) { - next_tick += clocktick; - nticks++; + if ((cycles_elapsed >> 5) < cpt) { + /* use "cheap" math (add/subtract) instead + * of the more expensive div/mul method + */ + cycles_remainder = cycles_elapsed; + while (cycles_remainder > cpt) { + cycles_remainder -= cpt; + } + } else { + cycles_remainder = cycles_elapsed % cpt; } - mtctl(next_tick, 16); + + /* Can we differentiate between "early CR16" (aka Scenario 1) and + * "long delay" (aka Scenario 3)? I don't think so. + * + * We expected timer_interrupt to be delivered at least a few hundred + * cycles after the IT fires. But it's arbitrary how much time passes + * before we call it "late". I've picked one second. + */ +/* aproximate HZ with shifts. Intended math is "(elapsed/clocktick) > HZ" */ +#if HZ == 1000 + if (cycles_elapsed > (cpt << 10) ) +#elif HZ == 250 + if (cycles_elapsed > (cpt << 8) ) +#elif HZ == 100 + if (cycles_elapsed > (cpt << 7) ) +#else +#warn WTF is HZ set to anyway? + if (cycles_elapsed > (HZ * cpt) ) +#endif + { + /* Scenario 3: very long delay? bad in any case */ + printk (KERN_CRIT "timer_interrupt(CPU %d): delayed!" + " cycles %lX rem %lX " + " next/now %lX/%lX\n", + cpu, + cycles_elapsed, cycles_remainder, + next_tick, now ); + } + + /* convert from "division remainder" to "remainder of clock tick" */ + cycles_remainder = cpt - cycles_remainder; + + /* Determine when (in CR16 cycles) next IT interrupt will fire. + * We want IT to fire modulo clocktick even if we miss/skip some. + * But those interrupts don't in fact get delivered that regularly. + */ + next_tick = now + cycles_remainder; + cpu_data[cpu].it_value = next_tick; - while (nticks--) { + /* Skip one clocktick on purpose if we are likely to miss next_tick. + * We want to avoid the new next_tick being less than CR16. + * If that happened, itimer wouldn't fire until CR16 wrapped. + * We'll catch the tick we missed on the tick after that. + */ + if (!(cycles_remainder >> 13)) + next_tick += cpt; + + /* Program the IT when to deliver the next interrupt. */ + /* Only bottom 32-bits of next_tick are written to cr16. */ + mtctl(next_tick, 16); + + + /* Done mucking with unreliable delivery of interrupts. + * Go do system house keeping. + */ #ifdef CONFIG_SMP - smp_do_timer(regs); + smp_do_timer(regs); #else - update_process_times(user_mode(regs)); + update_process_times(user_mode(regs)); #endif - if (cpu == 0) { - write_seqlock(&xtime_lock); - do_timer(1); - write_sequnlock(&xtime_lock); - } + if (cpu == 0) { + write_seqlock(&xtime_lock); + do_timer(regs); + write_sequnlock(&xtime_lock); } - + /* check soft power switch status */ if (cpu == 0 && !atomic_read(&power_tasklet.count)) tasklet_schedule(&power_tasklet); @@ -106,14 +165,12 @@ unsigned long profile_pc(struct pt_regs *regs) EXPORT_SYMBOL(profile_pc); -/*** converted from ia64 ***/ /* * Return the number of micro-seconds that elapsed since the last * update to wall time (aka xtime). The xtime_lock * must be at least read-locked when calling this routine. */ -static inline unsigned long -gettimeoffset (void) +static inline unsigned long gettimeoffset (void) { #ifndef CONFIG_SMP /* @@ -121,21 +178,44 @@ gettimeoffset (void) * Once parisc-linux learns the cr16 difference between processors, * this could be made to work. */ - long last_tick; - long elapsed_cycles; - - /* it_value is the intended time of the next tick */ - last_tick = cpu_data[smp_processor_id()].it_value; - - /* Subtract one tick and account for possible difference between - * when we expected the tick and when it actually arrived. - * (aka wall vs real) - */ - last_tick -= clocktick * (jiffies - wall_jiffies + 1); - elapsed_cycles = mfctl(16) - last_tick; + unsigned long now; + unsigned long prev_tick; + unsigned long next_tick; + unsigned long elapsed_cycles; + unsigned long usec; + unsigned long cpuid = smp_processor_id(); + unsigned long cpt = clocktick; + + next_tick = cpu_data[cpuid].it_value; + now = mfctl(16); /* Read the hardware interval timer. */ + + prev_tick = next_tick - cpt; + + /* Assume Scenario 1: "now" is later than prev_tick. */ + elapsed_cycles = now - prev_tick; + +/* aproximate HZ with shifts. Intended math is "(elapsed/clocktick) > HZ" */ +#if HZ == 1000 + if (elapsed_cycles > (cpt << 10) ) +#elif HZ == 250 + if (elapsed_cycles > (cpt << 8) ) +#elif HZ == 100 + if (elapsed_cycles > (cpt << 7) ) +#else +#warn WTF is HZ set to anyway? + if (elapsed_cycles > (HZ * cpt) ) +#endif + { + /* Scenario 3: clock ticks are missing. */ + printk (KERN_CRIT "gettimeoffset(CPU %ld): missing %ld ticks!" + " cycles %lX prev/now/next %lX/%lX/%lX clock %lX\n", + cpuid, elapsed_cycles / cpt, + elapsed_cycles, prev_tick, now, next_tick, cpt); + } - /* the precision of this math could be improved */ - return elapsed_cycles / (PAGE0->mem_10msec / 10000); + /* FIXME: Can we improve the precision? Not with PAGE0. */ + usec = (elapsed_cycles * 10000) / PAGE0->mem_10msec; + return usec; #else return 0; #endif @@ -146,6 +226,7 @@ do_gettimeofday (struct timeval *tv) { unsigned long flags, seq, usec, sec; + /* Hold xtime_lock and adjust timeval. */ do { seq = read_seqbegin_irqsave(&xtime_lock, flags); usec = gettimeoffset(); @@ -153,25 +234,13 @@ do_gettimeofday (struct timeval *tv) usec += (xtime.tv_nsec / 1000); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); - if (unlikely(usec > LONG_MAX)) { - /* This can happen if the gettimeoffset adjustment is - * negative and xtime.tv_nsec is smaller than the - * adjustment */ - printk(KERN_ERR "do_gettimeofday() spurious xtime.tv_nsec of %ld\n", usec); - usec += USEC_PER_SEC; - --sec; - /* This should never happen, it means the negative - * time adjustment was more than a second, so there's - * something seriously wrong */ - BUG_ON(usec > LONG_MAX); - } - - + /* Move adjusted usec's into sec's. */ while (usec >= USEC_PER_SEC) { usec -= USEC_PER_SEC; ++sec; } + /* Return adjusted result. */ tv->tv_sec = sec; tv->tv_usec = usec; } @@ -223,22 +292,23 @@ unsigned long long sched_clock(void) } +void __init start_cpu_itimer(void) +{ + unsigned int cpu = smp_processor_id(); + unsigned long next_tick = mfctl(16) + clocktick; + + mtctl(next_tick, 16); /* kick off Interval Timer (CR16) */ + + cpu_data[cpu].it_value = next_tick; +} + void __init time_init(void) { - unsigned long next_tick; static struct pdc_tod tod_data; clocktick = (100 * PAGE0->mem_10msec) / HZ; - halftick = clocktick / 2; - /* Setup clock interrupt timing */ - - next_tick = mfctl(16); - next_tick += clocktick; - cpu_data[smp_processor_id()].it_value = next_tick; - - /* kick off Itimer (CR16) */ - mtctl(next_tick, 16); + start_cpu_itimer(); /* get CPU 0 started */ if(pdc_tod_read(&tod_data) == 0) { write_seqlock_irq(&xtime_lock); |