summaryrefslogtreecommitdiffstats
path: root/arch/powerpc
Commit message (Collapse)AuthorAgeFilesLines
* ppc64: make sure to align stack pointer to 16 bytes at bootLinus Torvalds2006-03-041-0/+3
| | | | | | | | | yaboot is scrogged and calls us with an invalid stack alignment, it seems. Thanks to David Woodhouse to pointing me to the problem. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] Add mm->task_size and fix powerpc vdsoBenjamin Herrenschmidt2006-02-281-2/+2
| | | | | | | | | | | | | | | This patch adds mm->task_size to keep track of the task size of a given mm and uses that to fix the powerpc vdso so that it uses the mm task size to decide what pages to fault in instead of the current thread flags (which broke when ptracing). (akpm: I expect that mm_struct.task_size will become the way in which we finally sort out the confusion between 32-bit processes and 32-bit mm's. It may need tweaks, but at this stage this patch is powerpc-only.) Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc/iseries: Fix double phys_to_abs bug in htab_bolt_mappingMichael Ellerman2006-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | Before the merge I updated create_pte_mapping() to work for iSeries, by calling iSeries_hpte_bolt_or_insert. (4c55130b2aa93370f1bf52d2304394e91cf8ee39) Later we changed iSeries_hpte_insert to cope with the bolting case, and called that instead from create_pte_mapping() (which was renamed to htab_bolt_mapping) (3c726f8dee6f55e96475574e9f645327e461884c). Unfortunately that change introduced a subtle bug, where we pass an absolute address to iSeries_hpte_insert() where it expects a physical address. This leads to us calling phys_to_abs() twice on the physical address, which is seriously bogus. This only causes a problem if the absolute address from the first translation can be looked up again in the chunk_map, which depends on the size and layout of memory. I've seen it fail on one box, but not others. The minimal fix is to pass the physical address to iSeries_hpte_insert(). For 2.6.17 we should make phys_to_abs() BUG if we try to double-translate an address. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: fix NULL pointer in handle_eeh_eventsOlaf Hering2006-02-281-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This patch fixes a crash in handle_eeh_events, but ethtool -t still doesnt work right. ... pepino:~ # cpu 0x3: Vector: 300 (Data Access) at [c00000005192bbe0] pc: c00000000004a380: .handle_eeh_events+0xe0/0x23c lr: c00000000004a374: .handle_eeh_events+0xd4/0x23c sp: c00000005192be60 msr: 9000000000009032 dar: 268 dsisr: 40000000 current = 0xc0000001fe7bf1a0 paca = 0xc00000000048b280 pid = 16322, comm = eehd enter ? for help [c00000005192bf00] c00000000004a808 .eeh_event_handler+0xcc/0x130 [c00000005192bf90] c000000000025e00 .kernel_thread+0x4c/0x68 ... (none):/# /usr/sbin/ethtool -i eth0 driver: e100 version: 3.5.10-k2-NAPI firmware-version: N/A bus-info: 0000:21:01.0 (none):/# /usr/sbin/ethtool -t eth0 Call Trace: [C00000000F8DEFF0] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000F8DF0A0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000F8DF150] [C000000000049E58] .eeh_check_failure+0x10c/0x138 [C00000000F8DF1E0] [C0000000002DFDB0] .e100_hw_reset+0x70/0xf4 [C00000000F8DF270] [C0000000002E1BBC] .e100_hw_init+0x2c/0x260 [C00000000F8DF310] [C0000000002E2464] .e100_loopback_test+0x8c/0x220 [C00000000F8DF3C0] [C0000000002E28DC] .e100_diag_test+0xdc/0x16c [C00000000F8DF490] [C000000000420BE0] .dev_ethtool+0xf24/0x14f8 [C00000000F8DF8F0] [C00000000041F4A8] .dev_ioctl+0x5cc/0x740 [C00000000F8DFA20] [C00000000040FEFC] .sock_ioctl+0x3d0/0x404 [C00000000F8DFAC0] [C0000000000D513C] .do_ioctl+0x68/0x108 [C00000000F8DFB50] [C0000000000D56B0] .vfs_ioctl+0x4d4/0x510 [C00000000F8DFC10] [C0000000000D5740] .sys_ioctl+0x54/0x94 [C00000000F8DFCC0] [C0000000000FB6EC] .ethtool_ioctl+0x11c/0x150 [C00000000F8DFD60] [C0000000000F7E40] .compat_sys_ioctl+0x338/0x3bc [C00000000F8DFE30] [C00000000000871C] syscall_exit+0x0/0x40 EEH: Detected PCI bus error on device 0000:21:01.0 EEH: This PCI device has failed 1 times since last reboot: <NULL> - modprobe: FATAL: Could not load /lib/modules/2.6.16-rc4-git7/modules.dep: No such file or directory Cannot get strings: No such device (none):/# (none):/# EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 (none):/# Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> EEH: This PCI device has failed 1 times since last reboot: <NULL> - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> EEH: This PCI device has failed 1 times since last reboot: <NULL> - EEH: Unable to configure device bridge (-3) for /pci@400000000110/pci@2,2 Call Trace: [C00000000FA17940] [C00000000000F270] .show_stack+0x74/0x1b4 (unreliable) [C00000000FA179F0] [C000000000049D04] .eeh_dn_check_failure+0x290/0x2d8 [C00000000FA17AA0] [C00000000001E114] .rtas_read_config+0x120/0x154 [C00000000FA17B40] [C000000000049664] .early_enable_eeh+0x274/0x2bc [C00000000FA17C00] [C000000000049708] .eeh_add_device_early+0x5c/0x6c [C00000000FA17C90] [C000000000049748] .eeh_add_device_tree_early+0x30/0x5c [C00000000FA17D20] [C000000000046568] .pcibios_add_pci_devices+0x8c/0x1f8 [C00000000FA17DD0] [C00000000004A528] .eeh_reset_device+0xe0/0x110 [C00000000FA17E60] [C00000000004A698] .handle_eeh_events+0x140/0x250 [C00000000FA17F00] [C00000000004AC7C] .eeh_event_handler+0xe8/0x140 [C00000000FA17F90] [C000000000025784] .kernel_thread+0x4c/0x68 EEH: Detected PCI bus error on device <NULL> and so on Signed-off-by: Olaf Hering <olh@suse.de> Acked-by: Linas Vepstas <linas@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: vdso 64bits gettimeofday bugBenjamin Herrenschmidt2006-02-281-2/+2
| | | | | | | | | | A bug in the assembly code of the vdso can cause gettimeofday() to hang or to return incorrect results. The wrong register was used to test for pending updates of the calibration variables and to create a dependency for subsequent loads. This fixes it. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: fix dynamic PCI probe regressionJohn Rose2006-02-282-16/+34
| | | | | | | | | | | | | | | | Some hotplug driver functions were migrated to the kernel for use by EEH in commit 2bf6a8fa21570f37fd1789610da30f70a05ac5e3. Previously, the PCI Hotplug module had been changed to use the new OFDT-based PCI probe when appropriate: 5fa80fcdca9d20d30c9ecec30d4dbff4ed93a5c6 When rpaphp_pci_config_slot() was moved from the rpaphp driver to the new kernel function pcibios_add_pci_devices(), the OFDT-based probe stuff was dropped. This patch restores it. Signed-off-by: John Rose <johnrose@austin.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Make Kprobes depend on modulesLinus Torvalds2006-02-261-1/+1
| | | | | | | | | Commit 9ec4b1f356b3bad928ae8e2aa9caebfa737d52df made kprobes not compile without module support, so just make that clear in the Kconfig file. Also, since it's marked EXPERIMENTAL, make that dependency explicit too. Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: Fix mem= cmdline handling on arch/powerpc for !MULTIPLATFORMKumar Gala2006-02-241-16/+38
| | | | | | | | | | | | | mem= command line option was being ignored in arch/powerpc if we were not a CONFIG_MULTIPLATFORM (which is handled via prom_init stub). The initial command line extraction and parsing needed to be moved earlier in the boot process and have code to actual parse mem= and do something about it. Also, fixed a compile warning in the file. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Acked-by: Segher Boessenkool <segher@kernel.crashing.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] powerpc: Don't re-assign PCI resources on MapleSegher Boessenkool2006-02-241-2/+2
| | | | | | | | | Maple firmware does not need PCI resource allocation, and in fact, it can cause problems in some strange cases. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Fix some MPIC + HT APIC bugletsSegher Boessenkool2006-02-241-4/+5
| | | | | | | | | | | Do disable, not enable, the HT APIC IRQ in the function that is supposed to. Enable the MPIC IRQ before enabling the downstream APIC IRQ, avoids potentially losing an interrupt. Signed-off-by: Segher Boessenkool <segher@kernel.crashing.org> Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Update {g5,pseries,ppc64}_defconfigOlof Johansson2006-02-243-285/+189
| | | | | | | | | | | | Update defconfigs for g5, pseries and generic ppc64. Default choices for everything, with the following exceptions: * Enable WINDFARM_PM112 on g5 and ppc64. * Increase CONFIG_NR_CPUS to 4 in g5_defconfig * CONFIG_TIGON3=y instead of =m in g5_defconfig Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc64: remove broken/bitrotted HMT supportAnton Blanchard2006-02-243-138/+4
| | | | | | | | | | | HMT support is currently broken and needs to be reworked to play nicely with the SMT scheduler. Remove the bit rotten bits for the time being. I also updated an incorrect comment, we enter __secondary_hold with the physical cpu id in r3. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Fix runlatch performance issuesAnton Blanchard2006-02-243-10/+35
| | | | | | | | | | | | | | The runlatch SPR can take a lot of time to write. My original runlatch code would set it on every exception entry even though most of the time this was not required. It would also continually set it in the idle loop, which is an issue on an SMT capable processor. Now we cache the runlatch value in a threadinfo bit, and only check for it in decrementer and hardware interrupt exceptions as well as the idle loop. Boot on POWER3, POWER5 and iseries, and compile tested on pmac32. Signed-off-by: Anton Blanchard <anton@samba.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc64: fix spinlock recursion in native_hpte_clearR Sharada2006-02-241-1/+6
| | | | | | | | | | native_hpte_clear has a spinlock recursion problem with the native_tlbie_lock being called twice, once in native_hpte_clear() and once within tlbie(). Fix the problem by changing the call to tlbie() in native_hpte_clear() to __tlbie(). It still supports only 4k pages for now. Signed-off-by: R Sharada <sharada@in.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: disable OProfile for iSeriesKelly Daly2006-02-241-0/+1
| | | | | | | | Disable OProfile in Kconfig for iSeries to prevent hangs. OProfile was not originally intended to work with legacy iSeries. Signed-off-by: Kelly Daly <kelly@au.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: fix altivec_unavailable_exception OopsesAlan Curry2006-02-241-0/+1
| | | | | | | | | | | | | altivec_unavailable_exception is called without setting r3... it looks like the r3 that actually gets passed in as struct pt_regs *regs is the undisturbed value of r3 at the time the altivec instruction was encountered. The user actually gets to choose the pt_regs printed in the Oops! This fixes the oops by passing the correct pt_regs pointer to altivec_unavailable_exception. Signed-off-by: Alan Curry <pacman@TheWorld.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Trivial fix to set the proper timeout value for kdumpHaren Myneni2006-02-241-1/+3
| | | | | | | | | | The panic CPU is waiting forever due to some large timeout value if some CPU is not responding to an IPI. This patch fixes the problem - the maximum waiting period will be 10 seconds and then the kdump boot will go ahead. Signed-off-by: Haren Myneni <haren@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Only calculate htab_size in one place for kexecMichael Ellerman2006-02-242-8/+5
| | | | | | | | | | | | | | | | | For kexec we need to know the size of the MMU hash table. Currently we calculate the size once in the htab code, and then twice more in the kexec code, once using htab_hash_mask and once using ppc64_pft_size. On some machines the ppc64_pft_size calculation is broken because ppc64_pft_size is not set. So we need to fix the second calculation, but better still we should just calculate the size once and use it everywhere else. Tested on Power5 LPAR, Power4 non-LPAR and Power3. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* [PATCH] powerpc: Initialise hvlpevent_queue.lock correctlyMichael Ellerman2006-02-231-0/+2
| | | | | | | | | When I changed the hvlpevent_queue code to use a spinlock instead of a custom atomic (719d1cd86780c156f954fc34f34481adac197aec) I didn't initialise the lock anywhere, oops. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-02-207-211/+107
|\
| * [PATCH] powerpc: Fix bug in spinup of renumbered secondary threadsMichael Ellerman2006-02-201-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | If the logical and physical cpu ids of a secondary thread don't match, we will fail to spin the thread up on pSeries machines due to a bug in pseries/smp.c We call the RTAS "start-cpu" method with the physical cpu id, the address of pSeries_secondary_smp_init and the value to pass that function in r3. Currently we pass "lcpu", the logical cpu id, but pSeries_secondary_smp_init expects the physical cpu id in r3. We should be passing pcpu instead. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Make UP -> SMP kexec work againMichael Ellerman2006-02-201-3/+1
| | | | | | | | | | | | | | | | | | For UP to SMP kexec to work we need to jump into pSeries_secondary_smp_init event on a UP + KEXEC kernel. The secondary cpus will not find their hw_cpu_id in the paca and so they'll jump into kexec_wait, ready for a kexec. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Don't start secondary CPUs in a UP && KEXEC kernelMichael Ellerman2006-02-201-2/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | Because smp_release_cpus() is built for SMP || KEXEC, it's not safe to unconditionally call it from setup_system(). On a UP && KEXEC kernel we'll start up the secondary CPUs which will then go beserk and we die. Simple fix is to conditionally call smp_release_cpus() in setup_system(). With that in place we don't need the dummy definition of smp_release_cpus() because all call sites are #ifdef'ed either SMP or KEXEC. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Fix OOPS in lparcfg on G5Olof Johansson2006-02-201-2/+4
| | | | | | | | | | | | | | | | Fallback gracefully when reading /proc/ppc64/lparcfg when the /rtas device node can't be found. Signed-off-by: Olof Johansson <olof@lixom.net> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: remove duplicate exportsOlaf Hering2006-02-201-16/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | A few symbols are exported twice, remove them from ppc_ksyms.c Remove users of sys_ctrler in arch/ppc/ WARNING: vmlinux: duplicate symbol '__delay' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__up' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__down' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol '__down_interruptible' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'sys_ctrler' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strncat' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strncmp' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strchr' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strrchr' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strnlen' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strpbrk' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'memscan' previous definition was in vmlinux WARNING: vmlinux: duplicate symbol 'strstr' previous definition was in vmlinux Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * powerpc: Keep xtime and gettimeofday in syncPaul Mackerras2006-02-202-187/+99
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | This fixes a regression which was introduced by moving ppc32 to use the same sort of lockless gettimeofday as ppc64 has been using for some time. This involves getting the timebase and performing some simple arithmetic to convert it to seconds and microseconds. However, the factor and offset used there weren't being updated when NTP varied the tick length using adjtimex. 64-bit didn't notice the problem because it had a hook in the 32-bit adjtimex compat routine that attempted to work out what the generic timekeeping code would do and alter the factor and offset to match. However, that code was very complex and it wasn't clear that it still matched what the generic code would do. Now we use the generic current_tick_length() routine that was recently added to check that the current tick will be as long as we expect; if not we recompute the factor and offset. This keeps gettimeofday and xtime in sync. In addition we check that gettimeofday hasn't got ahead of xtime on each timer interrupt; if it has, we resync. Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] powermac: Fix loss of ethernet PHY on sleepBenjamin Herrenschmidt2006-02-201-5/+5
|/ | | | | | | | | | | | | Some recent PowerBook models tend to lose the ethernet PHY on suspend/resume. It -seems- that they use a combo ethernet-firewire PHY chip and the firewire PHY seems to die the same way when that happens. Not trying to toggle the firewire cable power appears to fix it. So this patch disables changes to the firewire cable power control GPIO on those models. Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-02-104-5/+11
|\
| * [PATCH] powerpc: Add CONFIG_DEFAULT_UIMAGE for embedded boardsKumar Gala2006-02-102-0/+7
| | | | | | | | | | | | | | | | | | | | | | Embedded boards that u-boot require a kernel image in the uImage format. This allows a given board to specify it wants a uImage built by default. This also fixes a warning at config time, as this symbol is referred to in arch/powerpc/platforms/83xx/Kconfig. Signed-off-by: Kumar Gala <galak@kernel.crashing.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: unshare system call registrationJANAK DESAI2006-02-101-0/+1
| | | | | | | | | | | | | | | | | | | | | | | | | | Registers system call for the powerpc architecture. Signed-off-by: Janak Desai <janak@us.ibm.com> Cc: Al Viro <viro@ftp.linux.org.uk> Cc: Christoph Hellwig <hch@lst.de> Cc: Michael Kerrisk <mtk-manpages@gmx.net> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Andi Kleen <ak@muc.de> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * ppc: Use the system call table from arch/powerpc/kernel/systbl.SPaul Mackerras2006-02-102-5/+3
| | | | | | | | | | | | | | With this, new system calls only have to be wired up in one place for ARCH=ppc and ARCH=powerpc, rather than 2. Signed-off-by: Paul Mackerras <paulus@samba.org>
* | [PATCH] Fix building external modules on ppc32Andreas Gruenbacher2006-02-101-0/+2
|/ | | | | | | | | | | | | | | | | | | | | | | | | We are setting up sources for building external modules like this: /usr/src/linux-obj> # create a .config file /usr/src/linux-obj> make -C /usr/src/linux O=$PWD oldconfig /usr/src/linux-obj> make -C /usr/src/linux O=$PWD prepare /usr/src/linux-obj> make -C /usr/src/linux O=$PWD scripts /usr/src/linux-obj> make -C /usr/src/linux O=$PWD clean After that, external modules can be built with: /usr/src/module> make -C /usr/src/linux-obj M=$PWD This fails for ppc32 because the `make clean' removes the arch/powerpc/include directory. This should be done in archmrproper instead of in archclean. Signed-off-by: Andreas Gruenbacher <agruen@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Sam Ravnborg <sam@ravnborg.org> Signed-off-by: Andrew Morton <akpm@osdl.org> Signed-off-by: Linus Torvalds <torvalds@osdl.org>
* [PATCH] fix iomem annotations in dart_iommuAl Viro2006-02-081-1/+1
| | | | | | it's int __iomem *, not int * __iomem... Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] powerpc signal __user annotationsAl Viro2006-02-082-13/+9
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* [PATCH] powermac pci iomem annotationsAl Viro2006-02-081-46/+43
| | | | Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
* Merge git://git.kernel.org/pub/scm/linux/kernel/git/paulus/powerpc-mergeLinus Torvalds2006-02-0720-60/+81
|\
| * [PATCH] powerpc: avoid timer interrupt replay effect when onlining cpuNathan Lynch2006-02-071-0/+3
| | | | | | | | | | | | | | | | | | | | | | | | When a cpu is hotplug-onlined, if we don't set per_cpu(last_jiffy) to something sane, timer_interrupt will execute its while loop for every tick missed since the cpu was last online (or since the system was booted, if we're adding a new cpu). This can cause weird hangs, ssh sessions dropping, and we can even go xmon if we take a global IPI at the wrong time. Signed-off-by: Nathan Lynch <ntl@pobox.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: hypervisor check in pseries_kexec_cpu_downMichael Neuling2006-02-071-1/+1
| | | | | | | | | | | | | | | | | | | | | | | | We call unregister_vpa but we don't check to see if the hypervisor supports this. Signed-off-by: Michael Neuling <mikey@neuling.org> Acked-by: Anton Blanchard <anton@samba.org> -- arch/powerpc/platforms/pseries/setup.c | 2 +- 1 files changed, 1 insertion(+), 1 deletion(-) Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Don't use toc in decrementer_iSeries_maskedMichael Ellerman2006-02-071-2/+3
| | | | | | | | | | | | | | | | | | | | | | Since 404849bbd2bfd62e05b36f4753f6e1af6050a824 we've been using LOAD_REG_ADDRBASE, which uses the toc pointer, in decrementer_iSeries_masked. This can explode if we take the decrementer interrupt while we're in a module, because the toc pointer in r2 will be the module's toc pointer. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Cleanup, consolidating icache dirtying logicDavid Gibson2006-02-071-12/+2
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | The code to mark a page as icache dirty (so that it will later be icache-dcache flushed when we try to execute from it) is duplicated in three places: flush_dcache_page() does this marking and nothing else, but clear_user_page() and copy_user_page() duplicate it, since those functions make the page icache dirty themselves. This patch makes those other functions call flush_dcache_page() instead, so the logic's all in one place. This will make life less confusing if we ever need to tweak the details of the the lazy icache flush mechanism. arch/powerpc/mm/mem.c | 14 ++------------ 1 file changed, 2 insertions(+), 12 deletions(-) Signed-off-by: David Gibson <dwg@au1.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] Don't check pointer for NULL before passing it to kfree ↵Jesper Juhl2006-02-071-2/+1
| | | | | | | | | | | | | | | | | | | | [arch/powerpc/kernel/rtas_flash.c] Checking a pointer for NULL before passing it to kfree is pointless, kfree does its own NULL checking of input. Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: fix compile warning in udbg_init_maple_realmodeOlaf Hering2006-02-071-1/+1
| | | | | | | | | | | | | | | | arch/powerpc/kernel/udbg_16550.c: In function `udbg_init_maple_realmode': arch/powerpc/kernel/udbg_16550.c:162: warning: assignment from incompatible pointer type Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: add refcounting to setup_peg2 and of_get_pci_addressOlaf Hering2006-02-072-1/+5
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | setup_peg2 must do some refcounting. of_get_pci_address may need to drop the node Pegasos l2cr : L2 cache was not active, activating PCI bus 0 controlled by pci at 80000000 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BD00] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BD30] [C000E068] program_check_exception+0x184/0x584 [C037BD90] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BE50] [C004FD94] __pte_alloc_kernel+0x64/0x80 (unreliable) [C037BE70] [C000CA18] of_get_parent+0x34/0x58 [C037BE90] [C0009B18] of_get_address+0x24/0x174 [C037BED0] [C000A108] of_address_to_resource+0x24/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 Badness in kref_get at /home/olaf/kernel/olh/ppc64/linux-2.6.16-rc2-olh/lib/kref.c:32 Call Trace: [C037BC90] [C0007934] show_stack+0x5c/0x184 (unreliable) [C037BCC0] [C000E068] program_check_exception+0x184/0x584 [C037BD20] [C000F5F0] ret_from_except_full+0x0/0x4c --- Exception: 700 at kref_get+0xc/0x24 LR = of_node_get+0x24/0x3c [C037BDE0] [00000000] 0x0 (unreliable) [C037BE00] [C000CA18] of_get_parent+0x34/0x58 [C037BE20] [C0009CE8] of_translate_address+0x2c/0x2fc [C037BEA0] [C0009FE8] __of_address_to_resource+0x30/0xc4 [C037BED0] [C000A130] of_address_to_resource+0x4c/0x68 [C037BF00] [C038B128] chrp_find_bridges+0x114/0x470 [C037BF90] [C038AE48] chrp_setup_arch+0x1fc/0x32c [C037BFB0] [C03849B0] setup_arch+0x144/0x188 [C037BFD0] [C037C45C] start_kernel+0x34/0x1a8 [C037BFF0] [000037A0] 0x37a0 PCI bus 0 controlled by pci at c0000000 Top of RAM: 0x10000000, Total RAM: 0x10000000 Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: remove pointer/integer confusion in of_find_node_by_nameOlaf Hering2006-02-071-2/+2
| | | | | | | | | | | | | | remove pointer/integer confusion Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: restore clock speed in /proc/cpuinfoOlaf Hering2006-02-073-23/+1
| | | | | | | | | | | | | | Use generic_calibrate_decr to restore missing clock: speed in /proc/cpuinfo Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: remove pointer/integer confusion in generic_calibrate_decrOlaf Hering2006-02-071-4/+4
| | | | | | | | | | | | | | remove pointer/integer confusion Signed-off-by: Olaf Hering <olh@suse.de> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: Don't overwrite flat device tree with kdump kernelMichael Ellerman2006-02-072-0/+30
| | | | | | | | | | | | | | | | | | | | | | | | | | | | It's possible for prom_init to allocate the flat device tree inside the kdump crash kernel region. If this happens, when we load the kdump kernel we overwrite the flattened device tree, which is bad. We could make prom_init try and avoid allocating inside the crash kernel region, but then we run into issues if the crash kernel region uses all the space inside the RMO. The easiest solution is to move the flat device tree once we're running in the kernel. Signed-off-by: Michael Ellerman <michael@ellerman.id.au> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: remove useless call to touch_softlockup_watchdogDave C Boutcher2006-02-071-4/+0
| | | | | | | | | | | | | | | | | | | | | | | | | | It turns out that we can't stop the watchdog from triggering here. If we touch the timer (which just uses the current jiffie value) before we enable interrupts, it does nothing because jiffies are not mass-updated until after we enable interrupts. If we touch the timer after we enable interrupts, its too late because the softlockup watchdog will already have triggered. The touch_softlockup_watchdog call removed below does nothing. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: prod all processors after ibm,suspend-meDave C Boutcher2006-02-071-0/+3
| | | | | | | | | | | | | | | | We need to prod everyone here since this is the only CPU that is guaranteed to be running after the ibm,suspend-me RTAS call returns. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
| * [PATCH] powerpc: return correct rtas status from ibm,suspend-meDave C Boutcher2006-02-071-2/+2
| | | | | | | | | | | | | | | | Correctly return the status from the RTAS call. rtas_call expects to return the status as a return value. Signed-off-by: Dave Boutcher <sleddog@us.ibm.com> Signed-off-by: Paul Mackerras <paulus@samba.org>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 19:24:14 +0000