summaryrefslogtreecommitdiffstats
path: root/fs/dlm/user.c
Commit message (Collapse)AuthorAgeFilesLines
* dlm: improve how bast mode handlingDavid Teigland2008-12-231-1/+3
| | | | | | | | | | | The lkb bastmode value is set in the context of processing the lock, and read by the dlm_astd thread. Because it's accessed in these two separate contexts, the writing/reading ought to be done under a lock. This is simple to do by setting it and reading it when the lkb is added to and removed from dlm_astd's callback list which is properly locked. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: remove bklDavid Teigland2008-09-041-8/+1
| | | | | | BLK from recent pushdown is not needed. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: detect available userspace daemonDavid Teigland2008-08-281-1/+60
| | | | | | | | | | | | | | | If dlm_controld (the userspace daemon that controls the setup and recovery of the dlm) fails, the kernel should shut down the lockspaces in the kernel rather than leaving them running. This is detected by having dlm_controld hold a misc device open while running, and if the kernel detects a close while the daemon is still needed, it stops the lockspaces in the kernel. Knowing that the userspace daemon isn't running also allows the lockspace create/remove routines to avoid waiting on the daemon for join/leave operations. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: allow multiple lockspace createsDavid Teigland2008-08-281-21/+33
| | | | | | | | | | Add a count for lockspace create and release so that create can be called multiple times to use the lockspace from different places. Also add the new flag DLM_LSFL_NEWEXCL to create a lockspace with the previous behavior of returning -EEXIST if the lockspace already exists. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: add missing kfreesDavid Teigland2008-08-131-3/+7
| | | | | | | | A couple of unlikely error conditions were missing a kfree on the error exit path. Reported-by: Juha Leppanen <juha_motorsportcom@luukku.com> Signed-off-by: David Teigland <teigland@redhat.com>
* Merge branch 'for-linus' of ↵Linus Torvalds2008-07-281-1/+1
|\ | | | | | | | | | | | | | | | | | | git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm * 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/teigland/dlm: dlm: fix uninitialized variable for search_rsb_list callers dlm: release socket on error dlm: fix basts for granted CW waiting PR/CW dlm: check for null in device_write
| * dlm: check for null in device_writeMasatake YAMATO2008-07-141-1/+1
| | | | | | | | | | | | | | | | | | If `device_write' method is called via "dlm-control", file->private_data is NULL. (See ctl_device_open() in user.c. ) Through proc->flags is read. Signed-off-by: Masatake YAMATO <yamato@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
* | dlm-user: BKL pushdownArnd Bergmann2008-06-201-1/+8
|/ | | | Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* dlm: add __init and __exit marks to init and exit functionsDenis Cheng2008-02-061-1/+1
| | | | | | | | it moves 365 bytes from .text to .init.text, and 30 bytes from .text to .exit.text, saves memory. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: eliminate astparam type castingDavid Teigland2008-02-061-5/+3
| | | | | | | Put lkb_astparam in a union with a dlm_user_args pointer to eliminate a lot of type casting. Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: dlm/user.c input validation fixesAl Viro2008-02-041-11/+8
| | | | | | | | | a) in device_write(): add sentinel NUL byte, making sure that lspace.name will be NUL-terminated b) in compat_input() be keep it simple about the amounts of data we are copying. Signed-off-by: Al Viro <viro@zeniv.linux.org.uk> Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: static initialization improvementsDenis Cheng2008-01-301-6/+7
| | | | | | | also change name_prefix from char pointer to char array. Signed-off-by: Denis Cheng <crquan@gmail.com> Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: Sanity check namelen before copying itPatrick Caulfeld2008-01-301-3/+9
| | | | | | | | | | | | | The 32/64 compatibility code in the DLM does not check the validity of the lock name length passed into it, so it can easily overwrite memory if the value is rubbish (as early versions of libdlm can cause with unlock calls, it doesn't zero the field). This patch restricts the length of the name to the amount of data actually passed into the call. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com>
* dlm: fix possible use-after-freeDavid Teigland2008-01-301-2/+2
| | | | | | | The dlm_put_lkb() can free the lkb and its associated ua structure, so we can't depend on using the ua struct after the put. Signed-off-by: David Teigland <teigland@redhat.com>
* Use helpers to obtain task pid in printksPavel Emelyanov2007-10-191-1/+1
| | | | | | | | | | | | | | | | The task_struct->pid member is going to be deprecated, so start using the helpers (task_pid_nr/task_pid_vnr/task_pid_nr_ns) in the kernel. The first thing to start with is the pid, printed to dmesg - in this case we may safely use task_pid_nr(). Besides, printks produce more (much more) than a half of all the explicit pid usage. [akpm@linux-foundation.org: git-drm went and changed lots of stuff] Signed-off-by: Pavel Emelyanov <xemul@openvz.org> Cc: Dave Airlie <airlied@linux.ie> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [DLM] canceling deadlocked lockDavid Teigland2007-07-091-0/+25
| | | | | | | | | Add a function that can be used through libdlm by a system daemon to cancel another process's deadlocked lock. A completion ast with EDEADLK is returned to the process waiting for the lock. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] timeout fixesDavid Teigland2007-07-091-19/+30
| | | | | | | | | | | | | | | | | | Various fixes related to the new timeout feature: - add_timeout() missed setting TIMEWARN flag on lkb's when the TIMEOUT flag was already set - clear_proc_locks should remove a dead process's locks from the timeout list - the end-of-life calculation for user locks needs to consider that ETIMEDOUT is equivalent to -DLM_ECANCEL - make initial default timewarn_cs config value visible in configfs - change bit position of TIMEOUT_CANCEL flag so it's not copied to a remote master node - set timestamp on remote lkb's so a lock dump will display the time they've been waiting Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] dlm_device interface changes [3/6]David Teigland2007-07-091-10/+43
| | | | | | | | | | | | | | | | | | | | Change the user/kernel device interface used by libdlm: - Add ability for userspace to check the version of the interface. libdlm can now adapt to different versions of the kernel interface. - Increase the size of the flags passed in a lock request so all possible flags can be used from userspace. - Add an opaque "xid" value for each lock. This "transaction id" will be used later to associate locks with each other during deadlock detection. - Add a "timeout" value for each lock. This is used along with the DLM_LKF_TIMEOUT flag. Also, remove a fragment of unused code in device_read(). This patch requires updating libdlm which is backward compatible with older kernels. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] add lock timeouts and warnings [2/6]David Teigland2007-07-091-1/+1
| | | | | | | | | | | | | | | | | New features: lock timeouts and time warnings. If the DLM_LKF_TIMEOUT flag is set, then the request/conversion will be canceled after waiting the specified number of centiseconds (specified per lock). This feature is only available for locks requested through libdlm (can be enabled for kernel dlm users if there's a use for it.) If the new DLM_LSFL_TIMEWARN flag is set when creating the lockspace, then a warning message will be sent to userspace (using genetlink) after a request/conversion has been waiting for a given number of centiseconds (configurable per node). The time warnings will be used in the future to do deadlock detection in userspace. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] Remove redundant assignmentPatrick Caulfield2007-05-011-2/+0
| | | | | | | This patch removes a redundant (and incorrect) assignment from compat_output Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] interface for purge (2/2)David Teigland2007-05-011-0/+28
| | | | | | | Add code to accept purge commands from userland. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] overlapping cancel and unlockDavid Teigland2007-05-011-33/+44
| | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | | Full cancel and force-unlock support. In the past, cancel and force-unlock wouldn't work if there was another operation in progress on the lock. Now, both cancel and unlock-force can overlap an operation on a lock, meaning there may be 2 or 3 operations in progress on a lock in parallel. This support is important not only because cancel and force-unlock are explicit operations that an app can use, but both are used implicitly when a process exits while holding locks. Summary of changes: - add-to and remove-from waiters functions were rewritten to handle situations with more than one remote operation outstanding on a lock - validate_unlock_args detects when an overlapping cancel/unlock-force can be sent and when it needs to be delayed until a request/lookup reply is received - processing request/lookup replies detects when cancel/unlock-force occured during the op, and carries out the delayed cancel/unlock-force - manipulation of the "waiters" (remote operation) state of a lock moved under the standard rsb mutex that protects all the other lock state - the two recovery routines related to locks on the waiters list changed according to the way lkb's are now locked before accessing waiters state - waiters recovery detects when lkb's being recovered have overlapping cancel/unlock-force, and may not recover such locks - revert_lock (cancel) returns a value to distinguish cases where it did nothing vs cases where it actually did a cancel; the cancel completion ast should only be done when cancel did something - orphaned locks put on new list so they can be found later for purging - cancel must be called on a lock when making it an orphan - flag user locks (ENDOFLIFE) at the end of their useful life (to the application) so we can return an error for any further cancel/unlock-force - we weren't setting COMP/BAST ast flags if one was already set, so we'd lose either a completion or blocking ast - clear an unread bast on a lock that's become unlocked Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] Don't delete misc device if lockspace removal failsPatrick Caulfield2007-05-011-22/+36
| | | | | | | | | | | | | | | | Currently if the lockspace removal fails the misc device associated with a lockspace is left deleted. After that there is no way to access the orphaned lockspace from userland. This patch recreates the misc device if th dlm_release_lockspace fails. I believe this is better than attempting to remove the lockspace first because that leaves an unattached device lying around. The potential gap in which there is no access to the lockspace between removing the misc device and recreating it is acceptable ... after all the application is trying to remove it, and only new users of the lockspace will be affected. Signed-Off-By: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fs/dlm/user.c should #include "user.h"Adrian Bunk2007-03-071-0/+1
| | | | | | | | Every file should include the headers containing the prototypes for it's global functions. Signed-off-by: Adrian Bunk <bunk@stusta.de> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [PATCH] mark struct file_operations const 6Arjan van de Ven2007-02-121-3/+3
| | | | | | | | | | | Many struct file_operations in the kernel can be "const". Marking them const moves these to the .rodata section, which avoids false sharing with potential dirty data. In addition it'll catch accidental writes at compile time to these shared resources. Signed-off-by: Arjan van de Ven <arjan@linux.intel.com> Signed-off-by: Andrew Morton <akpm@linux-foundation.org> Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
* [DLM] fix user unlockingDavid Teigland2007-02-051-0/+9
| | | | | | | | | | | | | | When a user process exits, we clear all the locks it holds. There is a problem, though, with locks that the process had begun unlocking before it exited. We couldn't find the lkb's that were in the process of being unlocked remotely, to flag that they are DEAD. To solve this, we move lkb's being unlocked onto a new list in the per-process structure that tracks what locks the process is holding. We can then go through this list to flag the necessary lkb's when clearing locks for a process when it exits. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] force removal of user lockspaceDavid Teigland2006-08-311-3/+6
| | | | | | | | | Check if the FORCEFREE flag has been provided from user space. If so, set the force option to dlm_release_lockspace() so that any remaining locks will be freed. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix whitespace damageDavid Teigland2006-07-211-1/+1
| | | | | | | My previous dlm patch added trailing whitespace damage, fix that. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] fix leaking user locksDavid Teigland2006-07-201-0/+16
| | | | | | | | User NOQUEUE lock requests to a remote node that failed with -EAGAIN were never being removed from a process's list of locks. Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
* [DLM] dlm: user locksDavid Teigland2006-07-131-0/+769
This changes the way the dlm handles user locks. The core dlm is now aware of user locks so they can be dealt with more efficiently. There is no more dlm_device module which previously managed its own duplicate copy of every user lock. Signed-off-by: Patrick Caulfield <pcaulfie@redhat.com> Signed-off-by: David Teigland <teigland@redhat.com> Signed-off-by: Steven Whitehouse <swhiteho@redhat.com>
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 09:54:16 +0000