/* $Id: isac.h,v 1.9.2.2 2004/01/12 22:52:27 keil Exp $
 *
 * ISAC specific defines
 *
 * Author       Karsten Keil
 * Copyright    by Karsten Keil      <keil@isdn4linux.de>
 * 
 * This software may be used and distributed according to the terms
 * of the GNU General Public License, incorporated herein by reference.
 *
 */

/* All Registers original Siemens Spec  */

#define ISAC_MASK 0x20
#define ISAC_ISTA 0x20
#define ISAC_STAR 0x21
#define ISAC_CMDR 0x21
#define ISAC_EXIR 0x24
#define ISAC_ADF2 0x39
#define ISAC_SPCR 0x30
#define ISAC_ADF1 0x38
#define ISAC_CIR0 0x31
#define ISAC_CIX0 0x31
#define ISAC_CIR1 0x33
#define ISAC_CIX1 0x33
#define ISAC_STCR 0x37
#define ISAC_MODE 0x22
#define ISAC_RSTA 0x27
#define ISAC_RBCL 0x25
#define ISAC_RBCH 0x2A
#define ISAC_TIMR 0x23
#define ISAC_SQXR 0x3b
#define ISAC_MOSR 0x3a
#define ISAC_MOCR 0x3a
#define ISAC_MOR0 0x32
#define ISAC_MOX0 0x32
#define ISAC_MOR1 0x34
#define ISAC_MOX1 0x34

#define ISAC_RBCH_XAC 0x80

#define ISAC_CMD_TIM	0x0
#define ISAC_CMD_RS	0x1
#define ISAC_CMD_SCZ	0x4
#define ISAC_CMD_SSZ	0x2
#define ISAC_CMD_AR8	0x8
#define ISAC_CMD_AR10	0x9
#define ISAC_CMD_ARL	0xA
#define ISAC_CMD_DUI	0xF

#define ISAC_IND_RS	0x1
#define ISAC_IND_PU	0x7
#define ISAC_IND_DR	0x0
#define ISAC_IND_SD	0x2
#define ISAC_IND_DIS	0x3
#define ISAC_IND_EI	0x6
#define ISAC_IND_RSY	0x4
#define ISAC_IND_ARD	0x8
#define ISAC_IND_TI	0xA
#define ISAC_IND_ATI	0xB
#define ISAC_IND_AI8	0xC
#define ISAC_IND_AI10	0xD
#define ISAC_IND_DID	0xF

extern void ISACVersion(struct IsdnCardState *, char *);
extern void setup_isac(struct IsdnCardState *);
extern void initisac(struct IsdnCardState *);
extern void isac_interrupt(struct IsdnCardState *, u_char);
extern void clear_pending_isac_ints(struct IsdnCardState *);
 m68k, and
it's not covered by ALSA yet.

Also, a couple of API header files (linux/sound.h and
linux/soundcard.h) are kept remaining as well, since the OSS API
itself is still supported by ALSA OSS emulation, and applications can
refer to these.

Where we're at it, some help texts in the top-level Kconfig are
adjusted, too (who still needs to specify I/O port in kbuild
nowadays?).

Reviewed-by: Jaroslav Kysela &lt;perex@perex.cz&gt;
Signed-off-by: Takashi Iwai &lt;tiwai@suse.de&gt;
</pre>
</div>
</content>
</entry>