Start of an attempt to unify support for GT64120 based boards.

9 files changed, 656 insertions, 0 deletions

diff --git a/arch/mips/gt64120/momenco_ocelot/.cvsignore b/arch/mips/gt64120/momenco_ocelot/.cvsignore
new file mode 100644
index 000000000..857dd22e9
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/.cvsignore
@@ -0,0 +1,2 @@
+.depend
+.*.flags
diff --git a/arch/mips/gt64120/momenco_ocelot/Makefile b/arch/mips/gt64120/momenco_ocelot/Makefile
new file mode 100644
index 000000000..ff7ee4a21
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/Makefile
@@ -0,0 +1,20 @@
+#
+# Makefile for Momentum's Ocelot board.
+#
+# Note! Dependencies are done automagically by 'make dep', which also
+# removes any old dependencies. DON'T put your own dependencies here
+# unless it's something special (ie not a .c file).
+#
+
+.S.s:
+	$(CPP) $(CFLAGS) $< -o $*.s
+.S.o:
+	$(CC) $(CFLAGS) -c $< -o $*.o
+
+O_TARGET:= momenco_ocelot.o
+
+obj-y	 += int-handler.o irq.o pci.o prom.o reset.o setup.o
+
+obj-$(CONFIG_REMOTE_DEBUG) += dbg_io.o
+
+include $(TOPDIR)/Rules.make
diff --git a/arch/mips/gt64120/momenco_ocelot/dbg_io.c b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
new file mode 100644
index 000000000..68dfb17e0
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/dbg_io.c
@@ -0,0 +1,124 @@
+#include <linux/config.h>
+
+#if defined(CONFIG_REMOTE_DEBUG)
+
+/* --- CONFIG --- */
+
+typedef unsigned char uint8;
+typedef unsigned int uint32;
+
+/* --- END OF CONFIG --- */
+
+#define         UART16550_BAUD_2400             2400
+#define         UART16550_BAUD_4800             4800
+#define         UART16550_BAUD_9600             9600
+#define         UART16550_BAUD_19200            19200
+#define         UART16550_BAUD_38400            38400
+#define         UART16550_BAUD_57600            57600
+#define         UART16550_BAUD_115200           115200
+
+#define         UART16550_PARITY_NONE           0
+#define         UART16550_PARITY_ODD            0x08
+#define         UART16550_PARITY_EVEN           0x18
+#define         UART16550_PARITY_MARK           0x28
+#define         UART16550_PARITY_SPACE          0x38
+
+#define         UART16550_DATA_5BIT             0x0
+#define         UART16550_DATA_6BIT             0x1
+#define         UART16550_DATA_7BIT             0x2
+#define         UART16550_DATA_8BIT             0x3
+
+#define         UART16550_STOP_1BIT             0x0
+#define         UART16550_STOP_2BIT             0x4
+
+/* ----------------------------------------------------- */
+
+/* === CONFIG === */
+
+/* [jsun] we use the second serial port for kdb */
+#define         BASE                    0xbd000020
+#define         MAX_BAUD                115200
+
+/* === END OF CONFIG === */
+
+#define         REG_OFFSET              4
+
+/* register offset */
+#define         OFS_RCV_BUFFER          0
+#define         OFS_TRANS_HOLD          0
+#define         OFS_SEND_BUFFER         0
+#define         OFS_INTR_ENABLE         (1*REG_OFFSET)
+#define         OFS_INTR_ID             (2*REG_OFFSET)
+#define         OFS_DATA_FORMAT         (3*REG_OFFSET)
+#define         OFS_LINE_CONTROL        (3*REG_OFFSET)
+#define         OFS_MODEM_CONTROL       (4*REG_OFFSET)
+#define         OFS_RS232_OUTPUT        (4*REG_OFFSET)
+#define         OFS_LINE_STATUS         (5*REG_OFFSET)
+#define         OFS_MODEM_STATUS        (6*REG_OFFSET)
+#define         OFS_RS232_INPUT         (6*REG_OFFSET)
+#define         OFS_SCRATCH_PAD         (7*REG_OFFSET)
+
+#define         OFS_DIVISOR_LSB         (0*REG_OFFSET)
+#define         OFS_DIVISOR_MSB         (1*REG_OFFSET)
+
+
+/* memory-mapped read/write of the port */
+#define         UART16550_READ(y)    (*((volatile uint8*)(BASE + y)))
+#define         UART16550_WRITE(y, z)  ((*((volatile uint8*)(BASE + y))) = z)
+
+void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop)
+{
+	/* disable interrupts */
+	UART16550_WRITE(OFS_INTR_ENABLE, 0);
+
+	/* set up buad rate */
+	{
+		uint32 divisor;
+
+		/* set DIAB bit */
+		UART16550_WRITE(OFS_LINE_CONTROL, 0x80);
+
+		/* set divisor */
+		divisor = MAX_BAUD / baud;
+		UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff);
+		UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00) >> 8);
+
+		/* clear DIAB bit */
+		UART16550_WRITE(OFS_LINE_CONTROL, 0x0);
+	}
+
+	/* set data format */
+	UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop);
+}
+
+static int remoteDebugInitialized = 0;
+
+uint8 getDebugChar(void)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_38400,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0);
+	return UART16550_READ(OFS_RCV_BUFFER);
+}
+
+
+int putDebugChar(uint8 byte)
+{
+	if (!remoteDebugInitialized) {
+		remoteDebugInitialized = 1;
+		debugInit(UART16550_BAUD_9600,
+			  UART16550_DATA_8BIT,
+			  UART16550_PARITY_NONE, UART16550_STOP_1BIT);
+	}
+
+	while ((UART16550_READ(OFS_LINE_STATUS) & 0x20) == 0);
+	UART16550_WRITE(OFS_SEND_BUFFER, byte);
+	return 1;
+}
+
+#endif
diff --git a/arch/mips/gt64120/momenco_ocelot/int-handler.S b/arch/mips/gt64120/momenco_ocelot/int-handler.S
new file mode 100644
index 000000000..df0525833
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/int-handler.S
@@ -0,0 +1,89 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * First-level interrupt dispatcher for ocelot board.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/config.h>
+#include <asm/asm.h>
+#include <asm/mipsregs.h>
+#include <asm/addrspace.h>
+#include <asm/regdef.h>
+#include <asm/stackframe.h>
+
+/*
+ * first level interrupt dispatcher for ocelot board -
+ * We check for the timer first, then check PCI ints A and D.
+ * Then check for serial IRQ and fall through.
+ */
+		.align	5
+		NESTED(ocelot_handle_int, PT_SIZE, sp)
+		SAVE_ALL
+		CLI
+		.set	at
+		mfc0	t0, CP0_CAUSE  
+		mfc0	t2, CP0_STATUS
+
+		and	t0, t2
+        
+		 andi	t1, t0, STATUSF_IP2	/* int0 hardware line */
+		bnez	t1, ll_pri_enet_irq
+		 andi	t1, t0, STATUSF_IP3	/* int1 hardware line */
+		bnez	t1, ll_sec_enet_irq
+		 andi	t1, t0, STATUSF_IP4	/* int2 hardware line */
+		bnez	t1, ll_uart1_irq
+		 andi	t1, t0, STATUSF_IP5	/* int3 hardware line */
+		bnez	t1, ll_cpci_irq
+		 andi	t1, t0, STATUSF_IP6	/* int4 hardware line */
+		bnez	t1, ll_galileo_irq
+		 andi	t1, t0, STATUSF_IP7	/* cpu timer */
+		bnez	t1, ll_cputimer_irq
+		.set	reorder
+
+		/* wrong alarm or masked ... */
+		j	spurious_interrupt
+		nop
+		END(ocelot_handle_int)
+
+		.align	5
+ll_pri_enet_irq:
+		li	a0, 2
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_sec_enet_irq:
+		li	a0, 3
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_uart1_irq:
+		li	a0, 4
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+	
+ll_cpci_irq:
+		li	a0, 5
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_galileo_irq:
+		li	a0, 6
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+
+ll_cputimer_irq:
+		li	a0, 7
+		move	a1, sp
+		jal	do_IRQ
+		j	ret_from_irq
+	
diff --git a/arch/mips/gt64120/momenco_ocelot/irq.c b/arch/mips/gt64120/momenco_ocelot/irq.c
new file mode 100644
index 000000000..8d832aadb
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/irq.c
@@ -0,0 +1,160 @@
+/*
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/kernel_stat.h>
+#include <linux/module.h>
+#include <linux/signal.h>
+#include <linux/sched.h>
+#include <linux/types.h>
+#include <linux/interrupt.h>
+#include <linux/ioport.h>
+#include <linux/timex.h>
+#include <linux/malloc.h>
+#include <linux/random.h>
+#include <linux/irq.h>
+#include <asm/bitops.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/mipsregs.h>
+#include <asm/system.h>
+
+
+#undef IRQ_DEBUG
+
+#ifdef IRQ_DEBUG
+#define DBG(x...) printk(x)
+#else
+#define DBG(x...)
+#endif
+
+
+/* Function for careful CP0 interrupt mask access */
+static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask)
+{
+	unsigned long status = read_32bit_cp0_register(CP0_STATUS);
+	DBG(KERN_INFO "modify_cp0_intmask clr %x, set %x\n", clr_mask,
+	    set_mask);
+	DBG(KERN_INFO "modify_cp0_intmask status %x\n", status);
+	status &= ~((clr_mask & 0xFF) << 8);
+	status |= (set_mask & 0xFF) << 8;
+	DBG(KERN_INFO "modify_cp0_intmask status %x\n", status);
+	write_32bit_cp0_register(CP0_STATUS, status);
+}
+
+static inline void mask_irq(unsigned int irq_nr)
+{
+	modify_cp0_intmask(irq_nr, 0);
+}
+
+static inline void unmask_irq(unsigned int irq_nr)
+{
+	modify_cp0_intmask(0, irq_nr);
+}
+
+void disable_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	DBG(KERN_INFO "disable_irq, irq %d\n", irq_nr);
+	save_and_cli(flags);
+	/* we don't support higher interrupts, nor cascaded interrupts */
+	if (irq_nr >= 8)
+		panic("irq_nr is greater than 8");
+	
+	mask_irq(1 << irq_nr);
+	restore_flags(flags);
+}
+
+void enable_irq(unsigned int irq_nr)
+{
+	unsigned long flags;
+
+	save_and_cli(flags);
+	
+	if ( irq_nr >= 8 )
+		panic("irq_nr is greater than 8");
+	
+	unmask_irq( 1 << irq_nr );
+	restore_flags(flags);
+}
+
+/*
+ * Ocelot irq setup -
+ *
+ * Initializes CPU interrupts
+ *
+ *
+ * Inputs :
+ *
+ * Outpus :
+ *
+ */
+void momenco_ocelot_irq_setup(void)
+{
+	extern asmlinkage void ocelot_handle_int(void);
+	extern void gt64120_irq_init(void);
+
+	DBG(KERN_INFO "rr: momenco_ocelot_irq_setup entry\n");
+
+	gt64120_irq_init();
+
+	/*
+	 * Clear all of the interrupts while we change the able around a bit.
+	 */
+	set_cp0_status(ST0_IM, 0);
+	set_cp0_status(ST0_BEV, 1);	/* int-handler is not on bootstrap */
+
+	/* Sets the first-level interrupt dispatcher. */
+	set_except_vector(0, ocelot_handle_int);
+
+	cli();
+
+	/*
+	 * Enable timer.  Other interrupts will be enabled as they are
+	 * registered.
+	 */
+	// set_cp0_status(ST0_IM, IE_IRQ4);
+
+
+#ifdef CONFIG_REMOTE_DEBUG
+	{
+		/*
+		extern int DEBUG_CHANNEL;
+		serial_init(DEBUG_CHANNEL);
+		serial_set(DEBUG_CHANNEL, 115200);
+		*/
+		printk("start kgdb ...\n");
+		set_debug_traps();
+		breakpoint();	/* you may move this line to whereever you want :-) */
+	}
+#endif
+}
diff --git a/arch/mips/gt64120/momenco_ocelot/pci.c b/arch/mips/gt64120/momenco_ocelot/pci.c
new file mode 100644
index 000000000..0c1d0a7b0
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/pci.c
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net
+ *
+ * arch/mips/gt64120/momenco_ocelot/pci.c
+ *     Board-specific PCI routines for gt64120 controller.
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/kernel.h>
+#include <linux/version.h>
+#include <linux/init.h>
+#include <asm/pci.h>
+
+
+void __init gt64120_board_pcibios_fixup_bus(struct pci_bus *bus)
+{
+	struct pci_bus *current_bus = bus;
+	struct pci_dev *devices;
+	struct list_head *devices_link;
+	u16 cmd;
+
+	list_for_each(devices_link, &(current_bus->devices)) {
+
+		devices = pci_dev_b(devices_link);
+		if (devices == NULL)
+			continue;
+
+		if (PCI_SLOT(devices->devfn) == 1) {
+			/*
+			 * Slot 1 is primary ether port, i82559
+			 * we double-check against that assumption
+			 /
+			if ((devices->vendor != 0x8086) ||
+			    (devices->device != 0x1209) ) {
+				panic("gt64120_board_pcibios_fixup_bus: found "
+				      "unexpected PCI device in slot 1.");
+			}
+			devices->irq = 2;       /* irq_nr is 2 for INT0 */
+		} else if (PCI_SLOT(devices->devfn) == 2) {
+			/*
+			 * Slot 2 is secondary ether port, i21143 
+			 * we double-check against that assumption
+			 */
+			if ((devices->vendor != 0x1011) ||
+			    (devices->device != 0x19) ) {
+				panic("galileo_pcibios_fixup_bus: "
+				      "found unexpected PCI device in slot 2.");
+			}
+			devices->irq = 3;       /* irq_nr is 3 for INT1 */
+		} else {
+			/* We don't have assign interrupts for other devices. */
+			devices->irq = 0;       /* irq_nr is 3 for INT1 */
+		}
+
+		/* Assign an interrupt number for the device */
+		bus->ops->write_byte(devices, PCI_INTERRUPT_LINE, devices->irq);
+
+		/* enable master */
+		bus->ops->read_word(devices, PCI_COMMAND, &cmd);
+		cmd |= PCI_COMMAND_MASTER;
+		bus->ops->write_word(devices, PCI_COMMAND, cmd);
+	}
+}
diff --git a/arch/mips/gt64120/momenco_ocelot/prom.c b/arch/mips/gt64120/momenco_ocelot/prom.c
new file mode 100644
index 000000000..6dfadf1fe
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/prom.c
@@ -0,0 +1,49 @@
+/*
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ */
+#include <linux/init.h>
+#include <linux/mm.h>
+#include <linux/sched.h>
+#include <linux/bootmem.h>
+
+#include <asm/addrspace.h>
+#include <asm/bootinfo.h>
+
+
+char arcs_cmdline[COMMAND_LINE_SIZE];
+
+/* [jsun@junsun.net] PMON passes arguments in C main() style */
+void __init prom_init(int argc, const char **arg)
+{
+	int i;
+
+	/* arg[0] is "g", the rest is boot parameters */
+	arcs_cmdline[0] = '\0';
+	for (i = 1; i < argc; i++) {
+		if (strlen(arcs_cmdline) + strlen(arg[i] + 1)
+		    >= sizeof(arcs_cmdline))
+			break;
+		strcat(arcs_cmdline, arg[i]);
+		strcat(arcs_cmdline, " ");
+	}
+
+	mips_machgroup = MACH_GROUP_MOMENCO;
+	mips_machtype = MACH_MOMENCO_OCELOT;
+
+	/* 128MB - we should detect this through ocelot board status register */
+	add_memory_region(0, 128 << 20, BOOT_MEM_RAM);
+}
+
+void __init prom_free_prom_memory(void)
+{
+}
+
+void __init prom_fixup_mem_map(unsigned long start, unsigned long end)
+{
+}
diff --git a/arch/mips/gt64120/momenco_ocelot/reset.c b/arch/mips/gt64120/momenco_ocelot/reset.c
new file mode 100644
index 000000000..0f4c7fee6
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/reset.c
@@ -0,0 +1,48 @@
+/*
+ * This program is free software; you can redistribute  it and/or modify it
+ * under  the terms of  the GNU General  Public License as published by the
+ * Free Software Foundation;  either version 2 of the  License, or (at your
+ * option) any later version.
+ *
+ * Copyright (C) 1997, 2001 Ralf Baechle
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ */
+#include <linux/sched.h>
+#include <linux/mm.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/processor.h>
+#include <asm/reboot.h>
+#include <asm/system.h>
+
+void momenco_ocelot_restart(char *command)
+{
+	*(volatile char *) 0xbc000000 = 0x0f;
+
+	/*
+	 * Ouch, we're still alive ... This time we take the silver bullet ...
+	 * ... and find that we leave the hardware in a state in which the
+	 * kernel in the flush locks up somewhen during of after the PCI
+	 * detection stuff.
+	 */
+	set_cp0_status((ST0_BEV | ST0_ERL), (ST0_BEV | ST0_ERL));
+	set_cp0_config(CONF_CM_CMASK, CONF_CM_UNCACHED);
+	flush_cache_all();
+	write_32bit_cp0_register(CP0_WIRED, 0);
+	__asm__ __volatile__("jr\t%0"::"r"(0xbfc00000));
+}
+
+void momenco_ocelot_halt(void)
+{
+	printk(KERN_NOTICE "\n** You can safely turn off the power\n");
+	while (1)
+		__asm__(".set\tmips3\n\t"
+	                "wait\n\t"
+			".set\tmips0");
+}
+
+void momenco_ocelot_power_off(void)
+{
+	momenco_ocelot_halt();
+}
diff --git a/arch/mips/gt64120/momenco_ocelot/setup.c b/arch/mips/gt64120/momenco_ocelot/setup.c
new file mode 100644
index 000000000..0ffc8c317
--- /dev/null
+++ b/arch/mips/gt64120/momenco_ocelot/setup.c
@@ -0,0 +1,95 @@
+/*
+ * setup.c
+ *
+ * BRIEF MODULE DESCRIPTION
+ * Galileo Evaluation Boards - board dependent boot routines
+ *
+ * Copyright (C) 1996, 1997, 2001  Ralf Baechle
+ * Copyright (C) 2000 RidgeRun, Inc.
+ * Author: RidgeRun, Inc.
+ *   glonnon@ridgerun.com, skranz@ridgerun.com, stevej@ridgerun.com
+ *
+ * Copyright 2001 MontaVista Software Inc.
+ * Author: jsun@mvista.com or jsun@junsun.net
+ *
+ *  This program is free software; you can redistribute  it and/or modify it
+ *  under  the terms of  the GNU General  Public License as published by the
+ *  Free Software Foundation;  either version 2 of the  License, or (at your
+ *  option) any later version.
+ *
+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ *  You should have received a copy of the  GNU General Public License along
+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
+ *  675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/mm.h>
+#include <linux/swap.h>
+#include <linux/ioport.h>
+#include <linux/sched.h>
+#include <linux/interrupt.h>
+#include <linux/pci.h>
+#include <linux/timex.h>
+#include <asm/bootinfo.h>
+#include <asm/page.h>
+#include <asm/bootinfo.h>
+#include <asm/io.h>
+#include <asm/irq.h>
+#include <asm/pci.h>
+#include <asm/processor.h>
+#include <asm/ptrace.h>
+#include <asm/reboot.h>
+#include <asm/mc146818rtc.h>
+#include <linux/version.h>
+#include <linux/bootmem.h>
+#include <linux/blk.h>
+#include <asm/gt64120/gt64120.h>
+
+extern struct rtc_ops no_rtc_ops;
+struct rtc_ops *rtc_ops;
+
+/* These functions are used for rebooting or halting the machine*/
+extern void momenco_ocelot_restart(char *command);
+extern void momenco_ocelot_halt(void);
+extern void momenco_ocelot_power_off(void);
+
+char arcs_cmdline[COMMAND_LINE_SIZE]= { ""/*console=ttyS0,9600"*/ };
+
+void (*board_time_init) (struct irqaction * irq);
+
+extern void gt64120_time_init(void);
+extern void momenco_ocelot_irq_setup(void);
+
+void momenco_ocelot_setup(void)
+{
+	unsigned int i, j;
+
+	irq_setup = momenco_ocelot_irq_setup;
+	board_time_init = gt64120_time_init;
+
+	mips_io_port_base = KSEG1;
+
+	_machine_restart = momenco_ocelot_restart;
+	_machine_halt = momenco_ocelot_halt;
+	_machine_power_off = momenco_ocelot_power_off;
+
+	/*
+	 * initrd_start = (ulong)ocelot_initrd_start;
+	 * initrd_end = (ulong)ocelot_initrd_start + (ulong)ocelot_initrd_size;
+	 * initrd_below_start_ok = 1;
+	 */
+	rtc_ops = &no_rtc_ops;
+}