Merge with Linux 2.3.21.

1 files changed, 521 insertions, 0 deletions

diff --git a/arch/ppc/kernel/m8xx_setup.c b/arch/ppc/kernel/m8xx_setup.c
new file mode 100644
index 000000000..f99f5b335
--- /dev/null
+++ b/arch/ppc/kernel/m8xx_setup.c
@@ -0,0 +1,521 @@
+/*
+ * $Id: m8xx_setup.c,v 1.4 1999/09/18 18:40:36 dmalek Exp $
+ *
+ *  linux/arch/ppc/kernel/setup.c
+ *
+ *  Copyright (C) 1995  Linus Torvalds
+ *  Adapted from 'alpha' version by Gary Thomas
+ *  Modified by Cort Dougan (cort@cs.nmt.edu)
+ *  Modified for MBX using prep/chrp/pmac functions by Dan (dmalek@jlc.net)
+ *  Further modified for generic 8xx by Dan.
+ */
+
+/*
+ * bootup setup stuff..
+ */
+
+#include <linux/config.h>
+#include <linux/errno.h>
+#include <linux/sched.h>
+#include <linux/kernel.h>
+#include <linux/mm.h>
+#include <linux/stddef.h>
+#include <linux/unistd.h>
+#include <linux/ptrace.h>
+#include <linux/malloc.h>
+#include <linux/user.h>
+#include <linux/a.out.h>
+#include <linux/tty.h>
+#include <linux/major.h>
+#include <linux/interrupt.h>
+#include <linux/reboot.h>
+#include <linux/init.h>
+#include <linux/blk.h>
+#include <linux/ioport.h>
+#include <linux/ide.h>
+
+#include <asm/mmu.h>
+#include <asm/processor.h>
+#include <asm/residual.h>
+#include <asm/io.h>
+#include <asm/pgtable.h>
+#include <asm/ide.h>
+#include <asm/mpc8xx.h>
+#include <asm/8xx_immap.h>
+#include <asm/machdep.h>
+
+#include "time.h"
+#include "ppc8xx_pic.h"
+
+static int m8xx_set_rtc_time(unsigned long time);
+unsigned long m8xx_get_rtc_time(void);
+void m8xx_calibrate_decr(void);
+
+#if 0
+extern int mackbd_setkeycode(unsigned int scancode, unsigned int keycode);
+extern int mackbd_getkeycode(unsigned int scancode);
+extern int mackbd_pretranslate(unsigned char scancode, char raw_mode);
+extern int mackbd_translate(unsigned char scancode, unsigned char *keycode,
+			   char raw_mode);
+extern char mackbd_unexpected_up(unsigned char keycode);
+extern void mackbd_leds(unsigned char leds);
+extern void mackbd_init_hw(void);
+#endif
+
+extern unsigned long loops_per_sec;
+
+unsigned char __res[sizeof(bd_t)];
+unsigned long empty_zero_page[1024];
+
+#ifdef CONFIG_BLK_DEV_RAM
+extern int rd_doload;		/* 1 = load ramdisk, 0 = don't load */
+extern int rd_prompt;		/* 1 = prompt for ramdisk, 0 = don't prompt */
+extern int rd_image_start;	/* starting block # of image */
+#endif
+
+extern char saved_command_line[256];
+
+extern unsigned long find_available_memory(void);
+extern void m8xx_cpm_reset(uint);
+
+void __init adbdev_init(void)
+{
+}
+
+void __init
+m8xx_setup_arch(unsigned long * memory_start_p, unsigned long * memory_end_p)
+{
+	int	cpm_page;
+	extern char cmd_line[];
+	
+	cpm_page = *memory_start_p;
+	*memory_start_p += PAGE_SIZE;
+	
+	printk("Boot arguments: %s\n", cmd_line);
+
+	/* Reset the Communication Processor Module.
+	*/
+	m8xx_cpm_reset(cpm_page);
+
+#ifdef notdef
+	ROOT_DEV = to_kdev_t(0x0301); /* hda1 */
+#endif
+	
+#ifdef CONFIG_BLK_DEV_INITRD
+#if 0
+	ROOT_DEV = to_kdev_t(0x0200); /* floppy */  
+	rd_prompt = 1;
+	rd_doload = 1;
+	rd_image_start = 0;
+#endif
+	/* initrd_start and size are setup by boot/head.S and kernel/head.S */
+	if ( initrd_start )
+	{
+		if (initrd_end > *memory_end_p)
+		{
+			printk("initrd extends beyond end of memory "
+			       "(0x%08lx > 0x%08lx)\ndisabling initrd\n",
+			       initrd_end,*memory_end_p);
+			initrd_start = 0;
+		}
+	}
+#endif
+}
+
+void
+abort(void)
+{
+#ifdef CONFIG_XMON
+	extern void xmon(void *);
+	xmon(0);
+#endif
+	machine_restart(NULL);
+}
+
+/* The decrementer counts at the system (internal) clock frequency divided by
+ * sixteen, or external oscillator divided by four.  We force the processor
+ * to use system clock divided by sixteen.
+ */
+void __init m8xx_calibrate_decr(void)
+{
+	bd_t	*binfo = (bd_t *)__res;
+	int freq, fp, divisor;
+
+	/* Unlock the SCCR.
+	*/
+	((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_clkrstk.cark_sccrk = KAPWR_KEY;
+
+	/* Force all 8xx processors to use divide by 16 processor clock.
+	*/
+	((volatile immap_t *)IMAP_ADDR)->im_clkrst.car_sccr |= 0x02000000;
+
+	/* Processor frequency is MHz.
+	 * The value 'fp' is the number of decrementer ticks per second.
+	 */
+	fp = (binfo->bi_intfreq * 1000000) / 16;
+	freq = fp*60;	/* try to make freq/1e6 an integer */
+        divisor = 60;
+        printk("time_init: decrementer frequency = %d/%d\n", freq, divisor);
+        decrementer_count = freq / HZ / divisor;
+        count_period_num = divisor;
+        count_period_den = freq / 1000000;
+}
+
+/* A place holder for time base interrupts, if they are ever enabled.
+*/
+void timebase_interrupt(int irq, void * dev, struct pt_regs * regs)
+{
+	printk("timebase_interrupt()\n");
+}
+
+/* The RTC on the MPC8xx is an internal register.
+ * We want to protect this during power down, so we need to unlock,
+ * modify, and re-lock.
+ */
+static int
+m8xx_set_rtc_time(unsigned long time)
+{
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtc = time;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtck = ~KAPWR_KEY;
+	return(0);
+}
+
+unsigned long __init
+m8xx_get_rtc_time(void)
+{
+	/* First, unlock all of the registers we are going to modify.
+	 * To protect them from corruption during power down, registers
+	 * that are maintained by keep alive power are "locked".  To
+	 * modify these registers we have to write the key value to
+	 * the key location associated with the register.
+	 * Some boards power up with these unlocked, while others
+	 * are locked.  Writing anything (including the unlock code?)
+	 * to the unlocked registers will lock them again.  So, here
+	 * we guarantee the registers are locked, then we unlock them
+	 * for our use.
+	 */
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk = ~KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbscrk = KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_rtcsck = KAPWR_KEY;
+	((volatile immap_t *)IMAP_ADDR)->im_sitk.sitk_tbk = KAPWR_KEY;
+
+	/* Disable the RTC one second and alarm interrupts.
+	*/
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_rtcsc &=
+						~(RTCSC_SIE | RTCSC_ALE);
+
+	/* Enabling the decrementer also enables the timebase interrupts
+	 * (or from the other point of view, to get decrementer interrupts
+	 * we have to enable the timebase).  The decrementer interrupt
+	 * is wired into the vector table, nothing to do here for that.
+	 */
+	((volatile immap_t *)IMAP_ADDR)->im_sit.sit_tbscr =
+				((mk_int_int_mask(DEC_INTERRUPT) << 8) |
+					 (TBSCR_TBF | TBSCR_TBE));
+	if (request_8xxirq(DEC_INTERRUPT, timebase_interrupt, 0, "tbint", NULL) != 0)
+		panic("Could not allocate timer IRQ!");
+
+	/* Get time from the RTC.
+	*/
+	return((unsigned long)(((immap_t *)IMAP_ADDR)->im_sit.sit_rtc));
+}
+
+void
+m8xx_restart(char *cmd)
+{
+	extern void m8xx_gorom(void);
+
+	m8xx_gorom();
+}
+
+void
+m8xx_power_off(void)
+{
+   m8xx_restart(NULL);
+}
+
+void
+m8xx_halt(void)
+{
+   m8xx_restart(NULL);
+}
+
+
+int m8xx_setup_residual(char *buffer)
+{
+        int     len = 0;
+	bd_t	*bp;
+
+	bp = (bd_t *)__res;
+			
+	len += sprintf(len+buffer,"clock\t\t: %dMHz\n"
+		       "bus clock\t: %dMHz\n",
+		       bp->bi_intfreq /*/ 1000000*/,
+		       bp->bi_busfreq /*/ 1000000*/);
+
+	return len;
+}
+
+/* Initialize the internal interrupt controller.  The number of
+ * interrupts supported can vary with the processor type, and the
+ * 82xx family can have up to 64.
+ * External interrupts can be either edge or level triggered, and
+ * need to be initialized by the appropriate driver.
+ */
+void __init
+m8xx_init_IRQ(void)
+{
+	int i;
+	void cpm_interrupt_init(void);
+
+        ppc8xx_pic.irq_offset = 0;
+        for ( i = 0 ; i < NR_SIU_INTS ; i++ )
+                irq_desc[i].ctl = &ppc8xx_pic;
+	
+	/* We could probably incorporate the CPM into the multilevel
+	 * interrupt structure.
+	 */
+	cpm_interrupt_init();
+        unmask_irq(CPM_INTERRUPT);
+
+#if defined(CONFIG_PCI)
+        for ( i = NR_SIU_INTS ; i < (NR_SIU_INTS + NR_8259_INTS) ; i++ )
+                irq_desc[i].ctl = &i8259_pic;
+        i8259_pic.irq_offset = NR_SIU_INTS;
+        i8259_init();
+        request_8xxirq(ISA_BRIDGE_INT, mbx_i8259_action, 0, "8259 cascade", NULL);
+        enable_irq(ISA_BRIDGE_INT);
+#endif
+}
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+
+/* Define this to make a PCMCIA ATA Flash card work.
+*/
+#define ATA_FLASH 1
+
+/*
+ * IDE stuff.
+ */
+void
+m8xx_ide_insw(ide_ioreg_t port, void *buf, int ns)
+{
+#ifdef ATA_FLASH
+	ide_insw(port, buf, ns);
+#else
+	ide_insw(port+_IO_BASE, buf, ns);
+#endif
+}
+
+void
+m8xx_ide_outsw(ide_ioreg_t port, void *buf, int ns)
+{
+#ifdef ATA_FLASH
+	ide_outsw(port, buf, ns);
+#else
+	ide_outsw(port+_IO_BASE, buf, ns);
+#endif
+}
+
+int
+m8xx_ide_default_irq(ide_ioreg_t base)
+{
+#ifdef ATA_FLASH
+	return PCMCIA_INTERRUPT;
+#else
+        return 14;
+#endif
+}
+
+ide_ioreg_t
+m8xx_ide_default_io_base(int index)
+{
+        return index;
+}
+
+int
+m8xx_ide_check_region(ide_ioreg_t from, unsigned int extent)
+{
+        return 0;
+}
+
+void
+m8xx_ide_request_region(ide_ioreg_t from,
+			unsigned int extent,
+			const char *name)
+{
+}
+
+void
+m8xx_ide_release_region(ide_ioreg_t from,
+			unsigned int extent)
+{
+}
+
+int
+m8xx_ide_request_irq(unsigned int irq,
+		       void (*handler)(int, void *, struct pt_regs *),
+		       unsigned long flags, 
+		       const char *device,
+		       void *dev_id)
+{
+#ifdef ATA_FLASH
+	return request_8xxirq(irq, handler, flags, device, dev_id);
+#else
+	return request_irq(irq, handler, flags, device, dev_id);
+#endif
+}
+
+void
+m8xx_ide_fix_driveid(struct hd_driveid *id)
+{
+        ppc_generic_ide_fix_driveid(id);
+}
+
+/* We can use an external IDE controller or wire the IDE interface to
+ * the internal PCMCIA controller.
+ */
+void __init m8xx_ide_init_hwif_ports(ide_ioreg_t *p, ide_ioreg_t base, int *irq)
+{
+	ide_ioreg_t port = base;
+	int i;
+#ifdef ATA_FLASH
+	volatile pcmconf8xx_t	*pcmp;
+#endif
+
+#ifdef ATA_FLASH
+	*p = 0;
+	*irq = 0;
+
+	if (base != 0)		/* Only map the first ATA flash drive */
+		return;
+
+	pcmp = (pcmconf8xx_t *)(&(((immap_t *)IMAP_ADDR)->im_pcmcia));
+	if (pcmp->pcmc_pipr & 0x18000000)
+		return;		/* No card in slot */
+
+	base = (unsigned long) ioremap(PCMCIA_MEM_ADDR, 0x200);
+
+	/* For the M-Systems ATA card, the first 8 registers map 1:1.
+	 * The following register, control/Altstatus, is located at 0x0e.
+	 * Following that, the irq offset, is not used, so we place it in
+	 * an unused location, 0x0a.
+	 */
+	*p++ = base + 8;
+	for (i = 1; i < 8; ++i)
+		*p++ = base + i;
+	*p++ = base + 0x0e;		/* control/altstatus */
+	*p = base + 0x0a;		/* IRQ, not used */
+	if (irq)
+		*irq = PCMCIA_INTERRUPT;
+
+	/* Configure the interface for this interrupt.
+	*/
+	pcmp->pcmc_pgcra = (mk_int_int_mask(PCMCIA_INTERRUPT) << 24) |
+		(mk_int_int_mask(PCMCIA_INTERRUPT) << 16);
+
+	/* Enable status change interrupt from slot A.
+	*/
+	pcmp->pcmc_per = 0xff100000;
+	pcmp->pcmc_pscr = ~0;
+#else
+	
+	/* Just a regular IDE drive on some I/O port.
+	*/
+	i = 8;
+	while (i--)
+		*p++ = port++;
+	*p++ = base + 0x206;
+	if (irq != NULL)
+		*irq = 0;
+#endif
+}
+#endif
+
+void __init
+m8xx_init(unsigned long r3, unsigned long r4, unsigned long r5,
+	 unsigned long r6, unsigned long r7)
+{
+
+	if ( r3 )
+		memcpy( (void *)__res,(void *)(r3+KERNELBASE), sizeof(bd_t) );
+	
+#ifdef CONFIG_PCI
+	m8xx_setup_pci_ptrs();
+#endif
+
+#ifdef CONFIG_BLK_DEV_INITRD
+	/* take care of initrd if we have one */
+	if ( r4 )
+	{
+		initrd_start = r4 + KERNELBASE;
+		initrd_end = r5 + KERNELBASE;
+	}
+#endif /* CONFIG_BLK_DEV_INITRD */
+	/* take care of cmd line */
+	if ( r6 )
+	{
+		
+		*(char *)(r7+KERNELBASE) = 0;
+		strcpy(cmd_line, (char *)(r6+KERNELBASE));
+	}
+
+	ppc_md.setup_arch     = m8xx_setup_arch;
+	ppc_md.setup_residual = m8xx_setup_residual;
+	ppc_md.get_cpuinfo    = NULL;
+	ppc_md.irq_cannonicalize = NULL;
+	ppc_md.init_IRQ       = m8xx_init_IRQ;
+	ppc_md.get_irq	      = m8xx_get_irq;
+	ppc_md.init           = NULL;
+
+	ppc_md.restart        = m8xx_restart;
+	ppc_md.power_off      = m8xx_power_off;
+	ppc_md.halt           = m8xx_halt;
+
+	ppc_md.time_init      = NULL;
+	ppc_md.set_rtc_time   = m8xx_set_rtc_time;
+	ppc_md.get_rtc_time   = m8xx_get_rtc_time;
+	ppc_md.calibrate_decr = m8xx_calibrate_decr;
+
+#if 0
+	ppc_md.kbd_setkeycode    = pckbd_setkeycode;
+	ppc_md.kbd_getkeycode    = pckbd_getkeycode;
+	ppc_md.kbd_pretranslate  = pckbd_pretranslate;
+	ppc_md.kbd_translate     = pckbd_translate;
+	ppc_md.kbd_unexpected_up = pckbd_unexpected_up;
+	ppc_md.kbd_leds          = pckbd_leds;
+	ppc_md.kbd_init_hw       = pckbd_init_hw;
+#ifdef CONFIG_MAGIC_SYSRQ
+	ppc_md.kbd_sysrq_xlate	 = pckbd_sysrq_xlate;
+#endif
+#else
+	ppc_md.kbd_setkeycode    = NULL;
+	ppc_md.kbd_getkeycode    = NULL;
+	ppc_md.kbd_translate     = NULL;
+	ppc_md.kbd_unexpected_up = NULL;
+	ppc_md.kbd_leds          = NULL;
+	ppc_md.kbd_init_hw       = NULL;
+#ifdef CONFIG_MAGIC_SYSRQ
+	ppc_md.kbd_sysrq_xlate	 = NULL;
+#endif
+#endif
+
+#if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE)
+        ppc_ide_md.insw = m8xx_ide_insw;
+        ppc_ide_md.outsw = m8xx_ide_outsw;
+        ppc_ide_md.default_irq = m8xx_ide_default_irq;
+        ppc_ide_md.default_io_base = m8xx_ide_default_io_base;
+        ppc_ide_md.check_region = m8xx_ide_check_region;
+        ppc_ide_md.request_region = m8xx_ide_request_region;
+        ppc_ide_md.release_region = m8xx_ide_release_region;
+        ppc_ide_md.fix_driveid = m8xx_ide_fix_driveid;
+        ppc_ide_md.ide_init_hwif = m8xx_ide_init_hwif_ports;
+        ppc_ide_md.ide_request_irq = m8xx_ide_request_irq;
+
+        ppc_ide_md.io_base = _IO_BASE;
+#endif		
+}