Merge with Linux 2.2.8.

1 files changed, 637 insertions, 0 deletions

diff --git a/arch/ppc/mbxboot/misc.c b/arch/ppc/mbxboot/misc.c
new file mode 100644
index 000000000..15bff41dd
--- /dev/null
+++ b/arch/ppc/mbxboot/misc.c
@@ -0,0 +1,637 @@
+/*
+ * misc.c
+ *
+ * $Id: misc.c,v 1.1 1999/02/17 05:00:06 cort Exp $
+ * 
+ * Adapted for PowerPC by Gary Thomas
+ *
+ * Rewritten by Cort Dougan (cort@cs.nmt.edu)
+ * One day to be replaced by a single bootloader for chrp/prep/pmac. -- Cort
+ */
+
+#include <linux/types.h>
+#include "../coffboot/zlib.h"
+#include "asm/residual.h"
+#include <linux/elf.h>
+#include <linux/config.h>
+#include <asm/page.h>
+#include <asm/processor.h>
+#include <asm/mmu.h>
+#ifdef CONFIG_MBX
+#include <asm/mbx.h>
+#endif
+#ifdef CONFIG_FADS
+#include <asm/fads.h>
+#endif
+
+/*
+ * Please send me load/board info and such data for hardware not
+ * listed here so I can keep track since things are getting tricky
+ * with the different load addrs with different firmware.  This will
+ * help to avoid breaking the load/boot process.
+ * -- Cort
+ */
+char *avail_ram;
+char *end_avail;
+
+/* Because of the limited amount of memory on the MBX, it presents
+ * loading problems.  The biggest is that we load this boot program
+ * into a relatively low memory address, and the Linux kernel Bss often
+ * extends into this space when it get loaded.  When the kernel starts
+ * and zeros the BSS space, it also writes over the information we
+ * save here and pass to the kernel (command line and board info).
+ * On the MBX we grab some known memory holes to hold this information.
+ */
+#if defined(CONFIG_SERIAL_CONSOLE)
+char cmd_preset[] = "console=ttyS0,9600n8";
+#else
+char cmd_preset[] = "";
+#endif
+char	cmd_buf[256];
+char	*cmd_line = cmd_buf;
+
+char	*root_string = "root=/dev/nfs";
+char	*nfsaddrs_string = "nfsaddrs=";
+char	*nfsroot_string = "nfsroot=";
+char	*defroot_string = "/sys/mbxroot";
+int	do_ipaddrs(char **cmd_cp, int echo);
+void	do_nfsroot(char **cmd_cp, char *dp);
+int	strncmp(const char * cs,const char * ct,size_t count);
+char	*strrchr(const char * s, int c);
+
+RESIDUAL hold_resid_buf;
+RESIDUAL *hold_residual = &hold_resid_buf;
+unsigned long initrd_start = 0, initrd_end = 0;
+char *zimage_start;
+int zimage_size;
+
+char *vidmem = (char *)0xC00B8000;
+int lines, cols;
+int orig_x, orig_y;
+
+void puts(const char *);
+void putc(const char c);
+void puthex(unsigned long val);
+void _bcopy(char *src, char *dst, int len);
+void * memcpy(void * __dest, __const void * __src,
+			    int __n);
+void gunzip(void *, int, unsigned char *, int *);
+
+void pause()
+{
+	puts("pause\n");
+}
+
+void exit()
+{
+	puts("exit\n");
+	while(1); 
+}
+
+/* The MBX is just the serial port.
+*/
+tstc(void)
+{
+        return (serial_tstc());
+}
+
+getc(void)
+{
+        while (1) {
+                if (serial_tstc()) return (serial_getc());
+        }
+}
+
+void 
+putc(const char c)
+{
+        serial_putchar(c);
+}
+
+void puts(const char *s)
+{
+        char c;
+
+        while ( ( c = *s++ ) != '\0' ) {
+                serial_putchar(c);
+                if ( c == '\n' )
+                        serial_putchar('\r');
+        }
+}
+
+
+void * memcpy(void * __dest, __const void * __src,
+			    int __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++) d[i] = s[i];
+}
+
+int memcmp(__const void * __dest, __const void * __src,
+			    int __n)
+{
+	int i;
+	char *d = (char *)__dest, *s = (char *)__src;
+
+	for (i=0;i<__n;i++, d++, s++)
+	{
+		if (*d != *s)
+		{
+			return (*s - *d);
+		}
+	}
+	return (0);
+}
+
+void error(char *x)
+{
+	puts("\n\n");
+	puts(x);
+	puts("\n\n -- System halted");
+
+	while(1);	/* Halt */
+}
+
+void *zalloc(void *x, unsigned items, unsigned size)
+{
+	void *p = avail_ram;
+	
+	size *= items;
+	size = (size + 7) & -8;
+	avail_ram += size;
+	if (avail_ram > end_avail) {
+		puts("oops... out of memory\n");
+		pause();
+	}
+	return p;
+}
+
+void zfree(void *x, void *addr, unsigned nb)
+{
+}
+
+#define HEAD_CRC	2
+#define EXTRA_FIELD	4
+#define ORIG_NAME	8
+#define COMMENT		0x10
+#define RESERVED	0xe0
+
+#define DEFLATED	8
+
+
+void gunzip(void *dst, int dstlen, unsigned char *src, int *lenp)
+{
+	z_stream s;
+	int r, i, flags;
+	
+	/* skip header */
+	i = 10;
+	flags = src[3];
+	if (src[2] != DEFLATED || (flags & RESERVED) != 0) {
+		puts("bad gzipped data\n");
+		exit();
+	}
+	if ((flags & EXTRA_FIELD) != 0)
+		i = 12 + src[10] + (src[11] << 8);
+	if ((flags & ORIG_NAME) != 0)
+		while (src[i++] != 0)
+			;
+	if ((flags & COMMENT) != 0)
+		while (src[i++] != 0)
+			;
+	if ((flags & HEAD_CRC) != 0)
+		i += 2;
+	if (i >= *lenp) {
+		puts("gunzip: ran out of data in header\n");
+		exit();
+	}
+	
+	s.zalloc = zalloc;
+	s.zfree = zfree;
+	r = inflateInit2(&s, -MAX_WBITS);
+	if (r != Z_OK) {
+		puts("inflateInit2 returned %d\n");
+		exit();
+	}
+	s.next_in = src + i;
+	s.avail_in = *lenp - i;
+	s.next_out = dst;
+	s.avail_out = dstlen;
+	r = inflate(&s, Z_FINISH);
+	if (r != Z_OK && r != Z_STREAM_END) {
+		puts("inflate returned %d\n");
+		exit();
+	}
+	*lenp = s.next_out - (unsigned char *) dst;
+	inflateEnd(&s);
+}
+
+unsigned char sanity[0x2000];
+
+unsigned long
+decompress_kernel(unsigned long load_addr, int num_words, unsigned long cksum, RESIDUAL *residual)
+{
+	int timer;
+	extern unsigned long start;
+	char *cp, ch;
+	unsigned long i, motorola_id = 0;
+	char needs_reloc = 0;
+	BATU *u;
+	BATL *l;
+	char	*dp;
+
+	lines = 25;
+	cols = 80;
+	orig_x = 0;
+	orig_y = 24;
+
+	/* Grab some space for the command line and board info.  Since
+	 * we no longer use the ELF header, but it was loaded, grab
+	 * that space.
+	 */
+	cmd_line = (char *)(load_addr - 0x10000);
+	hold_residual = (RESIDUAL *)(cmd_line + sizeof(cmd_buf));
+	/* copy board data */
+	if (residual)
+		memcpy(hold_residual,residual,sizeof(bd_t));
+
+	/* MBX/prep sometimes put the residual/board info at the end of mem 
+	 * assume 16M for now  -- Cort
+	 * To boot on standard MBX boards with 4M, we can't use initrd,
+	 * and we have to assume less memory.  -- Dan
+	 */
+	if ( INITRD_OFFSET )
+		end_avail = (char *)0x01000000;
+	else
+		end_avail = (char *)0x00400000;
+
+	/* let residual data tell us it's higher */
+	if ( (unsigned long)residual > 0x00800000 )
+		end_avail = (char *)PAGE_ALIGN((unsigned long)residual);
+
+	puts("loaded at:     "); puthex(load_addr);
+	puts(" "); puthex((unsigned long)(load_addr + (4*num_words))); puts("\n");
+	if ( (unsigned long)load_addr != (unsigned long)&start )
+	{
+		puts("relocated to:  "); puthex((unsigned long)&start);
+		puts(" ");
+		puthex((unsigned long)((unsigned long)&start + (4*num_words)));
+		puts("\n");
+	}
+
+	if ( residual )
+	{
+		puts("board data at: "); puthex((unsigned long)residual);
+		puts(" ");
+		puthex((unsigned long)((unsigned long)residual + sizeof(bd_t)));
+		puts("\n");
+		puts("relocated to:  ");
+		puthex((unsigned long)hold_residual);
+		puts(" ");
+		puthex((unsigned long)((unsigned long)hold_residual + sizeof(bd_t)));
+		puts("\n");
+	}
+
+	/* we have to subtract 0x10000 here to correct for objdump including the
+	   size of the elf header which we strip -- Cort */
+	zimage_start = (char *)(load_addr - 0x10000 + ZIMAGE_OFFSET);
+	zimage_size = ZIMAGE_SIZE;
+
+	if ( INITRD_OFFSET )
+		initrd_start = load_addr - 0x10000 + INITRD_OFFSET;
+	else
+		initrd_start = 0;
+	initrd_end = INITRD_SIZE + initrd_start;
+
+	/*
+	 * setup avail_ram - this is the first part of ram usable
+	 * by the uncompress code. -- Cort
+	 */
+	avail_ram = (char *)PAGE_ALIGN((unsigned long)zimage_start+zimage_size);
+	if ( ((load_addr+(num_words*4)) > (unsigned long) avail_ram)
+		&& (load_addr <= 0x01000000) )
+		avail_ram = (char *)(load_addr+(num_words*4));
+	if ( (((unsigned long)&start+(num_words*4)) > (unsigned long) avail_ram)
+		&& (load_addr <= 0x01000000) )
+		avail_ram = (char *)((unsigned long)&start+(num_words*4));
+	
+	/* relocate zimage */
+	puts("zimage at:     "); puthex((unsigned long)zimage_start);
+	puts(" "); puthex((unsigned long)(zimage_size+zimage_start)); puts("\n");
+	/*
+	 * don't relocate the zimage if it was loaded above 16M since
+	 * things get weird if we try to relocate -- Cort
+	 * We don't relocate zimage on a base MBX board because of
+	 * insufficient memory.  In this case we don't have initrd either,
+	 * so use that as an indicator.  -- Dan
+	 */
+	
+	/* Determine if we have a Motorola board */
+	needs_reloc = 0;
+	if ( (( (unsigned long)zimage_start <= 0x01000000 ) && initrd_start)
+		|| needs_reloc)
+	{
+		memcpy ((void *)PAGE_ALIGN(-PAGE_SIZE+(unsigned long)end_avail-zimage_size),
+			(void *)zimage_start, zimage_size );	
+		zimage_start = (char *)PAGE_ALIGN(-PAGE_SIZE+(unsigned long)end_avail-zimage_size);
+		end_avail = (char *)zimage_start;
+		puts("relocated to:  "); puthex((unsigned long)zimage_start);
+		puts(" ");
+		puthex((unsigned long)zimage_size+(unsigned long)zimage_start);
+		puts("\n");
+	}
+
+	/* relocate initrd */
+	if ( initrd_start )
+	{
+		puts("initrd at:     "); puthex(initrd_start);
+		puts(" "); puthex(initrd_end); puts("\n");
+		/*
+		 * Memory is really tight on the MBX (we can assume 4M)
+		 * so put the initrd at the TOP of ram, and set end_avail
+		 * to right after that.
+		 *
+		 * I should do something like this for prep, too and keep
+		 * a variable end_of_DRAM to keep track of what we think the
+		 * max ram is.
+		 * -- Cort
+		 */
+		if (needs_reloc)
+		{
+			memcpy ((void *)PAGE_ALIGN(-PAGE_SIZE+
+				(unsigned long)end_avail-INITRD_SIZE),
+				(void *)initrd_start,
+				INITRD_SIZE );
+			initrd_start = PAGE_ALIGN(-PAGE_SIZE+
+				(unsigned long)end_avail-INITRD_SIZE);
+			initrd_end = initrd_start + INITRD_SIZE;
+			end_avail = (char *)initrd_start;
+			puts("relocated to:  "); puthex(initrd_start);
+			puts(" "); puthex(initrd_end); puts("\n");
+		}
+	}
+
+	puts("avail ram:     "); puthex((unsigned long)avail_ram); puts(" ");
+	puthex((unsigned long)end_avail); puts("\n");
+
+	puts("\nLinux/PPC load: ");
+	timer = 0;
+	cp = cmd_line;
+	memcpy (cmd_line, cmd_preset, sizeof(cmd_preset));
+	while ( *cp ) putc(*cp++);
+	while (timer++ < 5*1000) {
+		if (tstc()) {
+			while ((ch = getc()) != '\n' && ch != '\r') {
+				if (ch == '\b') {
+					if (cp != cmd_line) {
+						cp--;
+						puts("\b \b");
+					}
+				  } else if (ch == '?') {
+					if (!do_ipaddrs(&cp, 1)) {
+						  *cp++ = ch;
+						  putc(ch);
+					}
+				} else {
+					*cp++ = ch;
+					putc(ch);
+				}
+			}
+			break;  /* Exit 'timer' loop */
+		}
+		udelay(1000);  /* 1 msec */
+	}
+	*cp = 0;
+	/* The MBX does not currently have any default boot strategy.
+	 * If the command line is not filled in, we will automatically
+	 * create the default network boot.
+	 */
+	if (cmd_line[0] == 0) {
+		dp = root_string;
+		while (*dp != 0)
+			*cp++ = *dp++;
+		*cp++ = ' ';
+
+		dp = nfsaddrs_string;
+		while (*dp != 0)
+			*cp++ = *dp++;
+		dp = cp;
+		do_ipaddrs(&cp, 0);
+		*cp++ = ' ';
+
+		/* Add the server address to the root file system path.
+		*/
+		dp = strrchr(dp, ':');
+		dp++;
+		do_nfsroot(&cp, dp);
+		*cp = 0;
+	}
+	puts("\n");
+
+	/* mappings on early boot can only handle 16M */
+	if ( (int)(cmd_line[0]) > (16<<20))
+		puts("cmd_line located > 16M\n");
+	if ( (int)hold_residual > (16<<20))
+		puts("hold_residual located > 16M\n");
+	if ( initrd_start > (16<<20))
+		puts("initrd_start located > 16M\n");
+       
+	puts("Uncompressing Linux...");
+
+	gunzip(0, 0x400000, zimage_start, &zimage_size);
+	puts("done.\n");
+	puts("Now booting the kernel\n");
+	return (unsigned long)hold_residual;
+}
+
+int
+do_ipaddrs(char **cmd_cp, int echo)
+{
+	char	*cp, *ip, ch;
+	unsigned char	ipd;
+	int	i, j, retval;
+
+	/* We need to create the string:
+	 *	<my_ip>:<serv_ip>
+	 */
+	cp = *cmd_cp;
+	retval = 0;
+
+	if ((cp - 9) >= cmd_line) {
+		if (strncmp(cp - 9, "nfsaddrs=", 9) == 0) {
+			ip = (char *)0xfa000060;
+			retval = 1;
+			for (j=0; j<2; j++) {
+				for (i=0; i<4; i++) {
+					ipd = *ip++;
+
+					ch = ipd/100;
+					if (ch) {
+						ch += '0';
+						if (echo)
+							putc(ch);
+						*cp++ = ch;
+						ipd -= 100 * (ch - '0');
+					}
+
+					ch = ipd/10;
+					if (ch) {
+						ch += '0';
+						if (echo)
+							putc(ch);
+						*cp++ = ch;
+						ipd -= 10 * (ch - '0');
+					}
+
+					ch = ipd + '0';
+					if (echo)
+						putc(ch);
+					*cp++ = ch;
+
+					ch = '.';
+					if (echo)
+						putc(ch);
+					*cp++ = ch;
+				}
+
+				/* At the end of the string, remove the
+				 * '.' and replace it with a ':'.
+				 */
+				*(cp - 1) = ':';
+				if (echo) {
+					putc('\b'); putc(':');
+				}
+			}
+
+			/* At the end of the second string, remove the
+			 * '.' from both the command line and the
+			 * screen.
+			 */
+			--cp;
+			putc('\b'); putc(' '); putc('\b');
+		}
+	}
+	*cmd_cp = cp;
+	return(retval);
+}
+
+void
+do_nfsroot(char **cmd_cp, char *dp)
+{
+	char	*cp, *rp, *ep;
+
+	/* The boot argument (i.e /sys/mbxroot/zImage) is stored
+	 * at offset 0x0078 in NVRAM.  We use this path name to
+	 * construct the root file system path.
+	 */
+	cp = *cmd_cp;
+
+	/* build command string.
+	*/
+	rp = nfsroot_string;
+	while (*rp != 0)
+		*cp++ = *rp++;
+
+	/* Add the server address to the path.
+	*/
+	while (*dp != ' ')
+		*cp++ = *dp++;
+	*cp++ = ':';
+
+	rp = (char *)0xfa000078;
+	ep = strrchr(rp, '/');
+
+	if (ep != 0) {
+		while (rp < ep)
+			*cp++ = *rp++;
+	}
+	else {
+		rp = defroot_string;
+		while (*rp != 0)
+			*cp++ = *rp++;
+	}
+
+	*cmd_cp = cp;
+}
+
+size_t strlen(const char * s)
+{
+	const char *sc;
+
+	for (sc = s; *sc != '\0'; ++sc)
+		/* nothing */;
+	return sc - s;
+}
+
+int strncmp(const char * cs,const char * ct,size_t count)
+{
+	register signed char __res = 0;
+
+	while (count) {
+		if ((__res = *cs - *ct++) != 0 || !*cs++)
+			break;
+		count--;
+	}
+
+	return __res;
+}
+
+char * strrchr(const char * s, int c)
+{
+       const char *p = s + strlen(s);
+       do {
+           if (*p == (char)c)
+               return (char *)p;
+       } while (--p >= s);
+       return NULL;
+}
+
+void puthex(unsigned long val)
+{
+	unsigned char buf[10];
+	int i;
+	for (i = 7;  i >= 0;  i--)
+	{
+		buf[i] = "0123456789ABCDEF"[val & 0x0F];
+		val >>= 4;
+	}
+	buf[8] = '\0';
+	puts(buf);
+}
+
+/*
+ * PCI/ISA I/O support
+ */
+
+volatile unsigned char *ISA_io  = (unsigned char *)0x80000000;
+volatile unsigned char *ISA_mem = (unsigned char *)0xC0000000;
+
+void
+outb(int port, char val)
+{
+	/* Ensure I/O operations complete */
+	__asm__ volatile("eieio");
+	ISA_io[port] = val;
+}
+
+unsigned char
+inb(int port)
+{
+	/* Ensure I/O operations complete */
+	__asm__ volatile("eieio");
+	return (ISA_io[port]);
+}
+
+unsigned long
+local_to_PCI(unsigned long addr)
+{
+	return ((addr & 0x7FFFFFFF) | 0x80000000);
+}
+
+void
+_bcopy(char *src, char *dst, int len)
+{
+	while (len--) *dst++ = *src++;
+}