Import of Linux/MIPS 2.1.14

1 files changed, 103 insertions, 207 deletions

diff --git a/arch/sparc/config.in b/arch/sparc/config.in
index be9336eed..45168ffe6 100644
--- a/arch/sparc/config.in
+++ b/arch/sparc/config.in
@@ -1,246 +1,142 @@
-#
-# arch/sparc/config.in
-#
-# Bare minimum configuration file for the Sparc.
-#
-# Copyright (C) 1994 David S. Miller (davem@caip.rutgers.edu)
-#
+# $Id: config.in,v 1.23 1996/10/28 01:24:40 davem Exp $
 # For a description of the syntax of this configuration file,
 # see the Configure script.
 #
+mainmenu_name "Linux/SPARC Kernel Configuration"
 
-comment 'Sparc Kernel setup'
-
-bool 'Sparc V8 kernel' CONFIG_SPARC_V8 y
-bool 'Sparc SMP support' CONFIG_LINUX_SMP n
-bool 'Sparc SUN4M support' CONFIG_SUN4M n
-bool 'Sparc Reference MMU' CONFIG_SRMMU n
-bool 'Networking support' CONFIG_NET n
-bool 'Limit memory to low 16MB' CONFIG_MAX_16M n
-bool 'System V IPC' CONFIG_SYSVIPC y
-bool 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF y
+mainmenu_option next_comment
+comment 'Code maturity level options'
+bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
+endmenu
 
-if [ "$CONFIG_NET" = "y" ]; then
-comment 'Networking options'
-bool 'TCP/IP networking' CONFIG_INET y
-if [ "$CONFIG_INET" "=" "y" ]; then
-bool 'IP forwarding/gatewaying' CONFIG_IP_FORWARD n
-bool 'IP multicasting (ALPHA)' CONFIG_IP_MULTICAST n
-bool 'IP firewalling' CONFIG_IP_FIREWALL n
-bool 'IP accounting' CONFIG_IP_ACCT n
-comment '(it is safe to leave these untouched)'
-bool 'PC/TCP compatibility mode' CONFIG_INET_PCTCP n
-bool 'Reverse ARP' CONFIG_INET_RARP n
-bool 'Assume subnets are local' CONFIG_INET_SNARL y
-bool 'Disable NAGLE algorithm (normally enabled)' CONFIG_TCP_NAGLE_OFF n
-fi
-bool 'The IPX protocol' CONFIG_IPX n
-#bool 'Amateur Radio AX.25 Level 2' CONFIG_AX25 n
+mainmenu_option next_comment
+comment 'Loadable module support'
+bool 'Enable loadable module support' CONFIG_MODULES
+if [ "$CONFIG_MODULES" = "y" ]; then
+  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
+  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
 fi
+endmenu
 
-comment 'SCSI support'
-
-bool 'SCSI support?' CONFIG_SCSI n
-
-if [ "$CONFIG_SCSI" = "n" ]; then
+mainmenu_option next_comment
+comment 'General setup'
 
-comment 'Skipping SCSI configuration options...'
+bool 'Support for AP1000 multicomputer' CONFIG_AP1000
 
+if [ "$CONFIG_AP1000" = "y" ]; then
+	define_bool CONFIG_NO_KEYBOARD y
+	define_bool CONFIG_APFDDI y
+	define_bool CONFIG_APBLOCK y
+	define_bool CONFIG_APBIF y
+	define_bool CONFIG_DDV y
 else
-
-comment 'SCSI support type (disk, tape, CDrom)'
-
-bool 'SCSI disk support' CONFIG_BLK_DEV_SD y
-bool 'SCSI tape support' CONFIG_CHR_DEV_ST n
-bool 'SCSI CDROM support' CONFIG_BLK_DEV_SR n
-bool 'SCSI generic support' CONFIG_CHR_DEV_SG n
-
-comment 'SCSI low-level drivers'
-
-bool 'Adaptec AHA152X support' CONFIG_SCSI_AHA152X n
-bool 'Adaptec AHA1542 support' CONFIG_SCSI_AHA1542 y
-bool 'Adaptec AHA1740 support' CONFIG_SCSI_AHA1740 n
-bool 'Adaptec AHA274X/284X support' CONFIG_SCSI_AHA274X n
-bool 'BusLogic SCSI support' CONFIG_SCSI_BUSLOGIC n
-bool 'UltraStor 14F/34F support' CONFIG_SCSI_U14_34F n
-bool 'Future Domain 16xx SCSI support' CONFIG_SCSI_FUTURE_DOMAIN n
-bool 'Generic NCR5380 SCSI support' CONFIG_SCSI_GENERIC_NCR5380 n
-if [ "$CONFIG_PCI" = "y" ]; then
-  bool 'NCR53c7,8xx SCSI support'  CONFIG_SCSI_NCR53C7xx n
-fi
-bool 'Always IN2000 SCSI support (test release)' CONFIG_SCSI_IN2000 n
-bool 'PAS16 SCSI support' CONFIG_SCSI_PAS16 n
-bool 'QLOGIC SCSI support' CONFIG_SCSI_QLOGIC n
-bool 'Seagate ST-02 and Future Domain TMC-8xx SCSI support' CONFIG_SCSI_SEAGATE n
-bool 'Trantor T128/T128F/T228 SCSI support' CONFIG_SCSI_T128 n
-bool 'UltraStor SCSI support' CONFIG_SCSI_ULTRASTOR n
-bool '7000FASST SCSI support' CONFIG_SCSI_7000FASST n
-bool 'EATA ISA/EISA (DPT PM2011/021/012/022/122/322) support' CONFIG_SCSI_EATA n
-#bool 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG n
+	# Global things across all Sun machines.
+	define_bool CONFIG_SBUS y
+	define_bool CONFIG_SBUSCHAR y
+	define_bool CONFIG_SUN_MOUSE y
+	define_bool CONFIG_SERIAL y
+	define_bool CONFIG_SUN_SERIAL y
+	define_bool CONFIG_SUN_KEYBOARD y
+	define_bool CONFIG_SUN_CONSOLE y
+	define_bool CONFIG_SUN_AUXIO y
+	define_bool CONFIG_SUN_IO y
+	source drivers/sbus/char/Config.in
 fi
 
+tristate 'Openprom tree appears in /proc/openprom (EXPERIMENTAL)' CONFIG_SUN_OPENPROMFS
+bool 'Networking support' CONFIG_NET
+bool 'System V IPC' CONFIG_SYSVIPC
+tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT
+tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
+if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
+  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
+fi
+endmenu
 
-if [ "$CONFIG_NET" = "y" ]; then
-
-comment 'Network device support'
-
-bool 'Network device support?' CONFIG_NETDEVICES y
-if [ "$CONFIG_NETDEVICES" = "n" ]; then
+mainmenu_option next_comment
+comment 'Floppy, IDE, and other block devices'
 
-comment 'Skipping network driver configuration options...'
+bool 'Normal floppy disk support' CONFIG_BLK_DEV_FD
 
-else
-bool 'Dummy net driver support' CONFIG_DUMMY n
-bool 'SLIP (serial line) support' CONFIG_SLIP n
-if [ "$CONFIG_SLIP" = "y" ]; then
-  bool ' CSLIP compressed headers' SL_COMPRESSED y
-  bool ' 16 channels instead of 4' SL_SLIP_LOTS n
-#  bool ' SLIP debugging on' SL_DUMP y
-fi
-bool 'PPP (point-to-point) support' CONFIG_PPP n
-bool 'PLIP (parallel port) support' CONFIG_PLIP n
-bool 'Load balancing support (experimental)' CONFIG_SLAVE_BALANCING n
-bool 'Do you want to be offered ALPHA test drivers' CONFIG_NET_ALPHA n
-bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC n
-if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then
-	bool 'WD80*3 support' CONFIG_WD80x3 n
-	bool 'SMC Ultra support' CONFIG_ULTRA n
-fi
-bool 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE n
-bool '3COM cards' CONFIG_NET_VENDOR_3COM y
-if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then
-	bool '3c501 support' CONFIG_EL1 n
-	bool '3c503 support' CONFIG_EL2 n
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool '3c505 support' CONFIG_ELPLUS n
-		bool '3c507 support' CONFIG_EL16 n
-	fi
-	bool '3c509/3c579 support' CONFIG_EL3 y
-fi
-bool 'Other ISA cards' CONFIG_NET_ISA n
-if [ "$CONFIG_NET_ISA" = "y" ]; then
-	bool 'Cabletron E21xx support' CONFIG_E2100 n
-	bool 'DEPCA support' CONFIG_DEPCA n
-	bool 'EtherWorks 3 support' CONFIG_EWRK3 n
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-#		bool 'Arcnet support' CONFIG_ARCNET n
-		bool 'AT1700 support' CONFIG_AT1700 n
-#		bool 'EtherExpressPro support' CONFIG_EEXPRESS_PRO n
-		bool 'EtherExpress support' CONFIG_EEXPRESS n
-		bool 'NI5210 support' CONFIG_NI52 n
-		bool 'NI6510 support' CONFIG_NI65 n
-	fi
-	bool 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS n
-	bool 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN n
-	bool 'NE2000/NE1000 support' CONFIG_NE2000 y
-	bool 'SK_G16 support' CONFIG_SK_G16 n
-fi
-bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA n
-if [ "$CONFIG_NET_EISA" = "y" ]; then
-	if [ "$CONFIG_NET_ALPHA" = "y" ]; then
-		bool 'Ansel Communications EISA 3200 support' CONFIG_AC3200 n
-	fi
-	bool 'Apricot Xen-II on board ethernet' CONFIG_APRICOT n
-#	bool 'DEC 21040 PCI support' CONFIG_DEC_ELCP n
-#	bool 'LPL T100V 100Mbs support' CONFIG_LPL_T100 n
-#	bool 'PCnet32 (32 bit VLB and PCI LANCE) support' CONFIG_PCNET32 n
-	bool 'Zenith Z-Note support' CONFIG_ZNET y
-fi
-bool 'Pocket and portable adaptors' CONFIG_NET_POCKET n
-if [ "$CONFIG_NET_POCKET" = "y" ]; then
-	bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP n
-	bool 'D-Link DE600 pocket adaptor support' CONFIG_DE600 n
-	bool 'D-Link DE620 pocket adaptor support' CONFIG_DE620 n
-#	bool 'Silicom pocket adaptor support' CONFIG_SILICOM_PEA n
-#	bool 'WaveLAN PCMCIA support' CONFIG_WaveLAN n
-#	bool '3 Com 3c589 PCMCIA support' CONFIG_3C589 n
-fi
-fi
+bool 'Multiple devices driver support' CONFIG_BLK_DEV_MD
+if [ "$CONFIG_BLK_DEV_MD" = "y" ]; then
+  tristate '   Linear (append) mode' CONFIG_MD_LINEAR
+  tristate '   RAID-0 (striping) mode' CONFIG_MD_STRIPED
 fi
 
-comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'
-
-bool 'Sony CDU31A/CDU33A CDROM driver support' CONFIG_CDU31A n
-bool 'Mitsumi (not IDE/ATAPI) CDROM driver support' CONFIG_MCD n
-bool 'Matsushita/Panasonic CDROM driver support' CONFIG_SBPCD n
-if [ "$CONFIG_SBPCD" = "y" ]; then
-  bool 'Matsushita/Panasonic second CDROM controller support' CONFIG_SBPCD2 n
-  if [ "$CONFIG_SBPCD2" = "y" ]; then
-    bool 'Matsushita/Panasonic third CDROM controller support' CONFIG_SBPCD3 n
-    if [ "$CONFIG_SBPCD3" = "y" ]; then
-      bool 'Matsushita/Panasonic fourth CDROM controller support' CONFIG_SBPCD4 n
-    fi
-  fi
+tristate 'RAM disk support' CONFIG_BLK_DEV_RAM
+if [ "$CONFIG_BLK_DEV_RAM" = "y" ]; then
+  bool '   Initial RAM disk (initrd) support' CONFIG_BLK_DEV_INITRD
 fi
-bool 'Aztech/Orchid/Okano/Wearnes (non IDE) CDROM support' CONFIG_AZTCD n
 
-comment 'Filesystems'
+tristate 'Loopback device support' CONFIG_BLK_DEV_LOOP
 
-bool 'Standard (minix) fs support' CONFIG_MINIX_FS y
-bool 'Extended fs support' CONFIG_EXT_FS y
-bool 'Second extended fs support' CONFIG_EXT2_FS y
-bool 'xiafs filesystem support' CONFIG_XIA_FS y
-bool 'msdos fs support' CONFIG_MSDOS_FS y
-if [ "$CONFIG_MSDOS_FS" = "y" ]; then
-bool 'umsdos: Unix like fs on top of std MSDOS FAT fs' CONFIG_UMSDOS_FS n
-fi
-bool '/proc filesystem support' CONFIG_PROC_FS n
-if [ "$CONFIG_INET" = "y" ]; then
-bool 'NFS filesystem support' CONFIG_NFS_FS n
-fi
-if [ "$CONFIG_BLK_DEV_SR" = "y" -o "$CONFIG_CDU31A" = "y" -o "$CONFIG_MCD" = "y" -o "$CONFIG_SBPCD" = "y" -o "$CONFIG_BLK_DEV_IDECD" = "y" ]; then
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS y
-else
-	bool 'ISO9660 cdrom filesystem support' CONFIG_ISO9660_FS n
+endmenu
+
+if [ "$CONFIG_NET" = "y" ]; then
+	source net/Config.in
 fi
-bool 'OS/2 HPFS filesystem support (read only)' CONFIG_HPFS_FS n
-bool 'System V and Coherent filesystem support' CONFIG_SYSV_FS y
 
+mainmenu_option next_comment
+comment 'SCSI support'
 
-comment 'character devices'
+tristate 'SCSI support' CONFIG_SCSI
 
-bool 'Cyclades async mux support' CONFIG_CYCLADES n
-bool 'Parallel printer support' CONFIG_PRINTER n
-bool 'Logitech busmouse support' CONFIG_BUSMOUSE n
-bool 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE n
-if [ "$CONFIG_PSMOUSE" = "y" ]; then
-bool 'C&T 82C710 mouse port support (as on TI Travelmate)' CONFIG_82C710_MOUSE y
-fi
-bool 'Microsoft busmouse support' CONFIG_MS_BUSMOUSE n
-bool 'ATIXL busmouse support' CONFIG_ATIXL_BUSMOUSE n
+if [ "$CONFIG_SCSI" != "n" ]; then
+	comment 'SCSI support type (disk, tape, CDrom)'
 
+	dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
+	dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
+	dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
+	dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI
 
-bool 'QIC-02 tape support' CONFIG_QIC02_TAPE n
-if [ "$CONFIG_QIC02_TAPE" = "y" ]; then
-bool 'Do you want runtime configuration for QIC-02' CONFIG_QIC02_DYNCONF y
-if [ "$CONFIG_QIC02_DYNCONF" != "y" ]; then
+	comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'
 
-comment '>>> Edit configuration parameters in ./include/linux/tpqic02.h!'
+	bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN
 
-else
+	bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS
 
-comment '>>> Setting runtime QIC-02 configuration is done with qic02conf'
-comment '>>> Which is available from ftp://ftp.funet.fi/pub/OS/Linux/BETA/QIC-02/'
+	mainmenu_option next_comment
+	comment 'SCSI low-level drivers'
 
+	bool 'Sparc ESP Scsi Driver' CONFIG_SCSI_SUNESP $CONFIG_SCSI
+	endmenu
 fi
-fi
+endmenu
 
-bool 'QIC-117 tape support' CONFIG_FTAPE n
-if [ "$CONFIG_FTAPE" = "y" ]; then
-int ' number of ftape buffers' NR_FTAPE_BUFFERS 3
+if [ "$CONFIG_NET" = "y" ]; then
+	mainmenu_option next_comment
+	comment 'Network device support'
+
+	bool 'Network device support' CONFIG_NETDEVICES
+	if [ "$CONFIG_NETDEVICES" = "y" ]; then
+		tristate 'Dummy net driver support' CONFIG_DUMMY
+		tristate 'PPP (point-to-point) support' CONFIG_PPP
+		if [ ! "$CONFIG_PPP" = "n" ]; then
+		   comment 'CCP compressors for PPP are only built as modules.'
+		fi
+		tristate 'SLIP (serial line) support' CONFIG_SLIP
+		if [ "$CONFIG_SLIP" != "n" ]; then
+		  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
+		  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
+		  bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6
+		fi
+		bool 'Sun LANCE support' CONFIG_SUNLANCE
+		bool 'Sun Happy Meal 10/100baseT support' CONFIG_HAPPYMEAL
+#		bool 'FDDI driver support' CONFIG_FDDI
+#		if [ "$CONFIG_FDDI" = "y" ]; then
+#		fi
+	fi
+	endmenu
 fi
 
-comment 'Sound'
-
-bool 'Sound card support' CONFIG_SOUND n
+source fs/Config.in
 
+mainmenu_option next_comment
 comment 'Kernel hacking'
 
-#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC n
-bool 'Kernel profiling support' CONFIG_PROFILE n
+bool 'Kernel profiling support' CONFIG_PROFILE
 if [ "$CONFIG_PROFILE" = "y" ]; then
-  int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
-fi
-if [ "$CONFIG_SCSI" = "y" ]; then
-bool 'Verbose SCSI error reporting (kernel size +=12K)' CONFIG_SCSI_CONSTANTS y
+	int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
 fi
+endmenu