Import of Linux/MIPS 2.1.14

1 files changed, 553 insertions, 0 deletions

diff --git a/drivers/block/ide-cd.h b/drivers/block/ide-cd.h
new file mode 100644
index 000000000..4071929ab
--- /dev/null
+++ b/drivers/block/ide-cd.h
@@ -0,0 +1,553 @@
+#ifndef _IDE_CD_H
+#define _IDE_CD_H
+/*
+ *  linux/drivers/block/ide_modes.h
+ *
+ *  Copyright (C) 1996  Erik Andersen
+ */
+
+/* Turn this on to have the driver print out the meanings of the
+   ATAPI error codes.  This will use up additional kernel-space
+   memory, though. */
+
+#ifndef VERBOSE_IDE_CD_ERRORS
+#define VERBOSE_IDE_CD_ERRORS 0
+#endif
+
+
+/* Turn this on to have the driver print out the meanings of the
+   ATAPI error codes.  This will use up additional kernel-space
+   memory, though. */
+
+#ifndef VERBOSE_IDE_CD_ERRORS
+#define VERBOSE_IDE_CD_ERRORS 0
+#endif
+
+
+/* Turning this on will remove code to work around various nonstandard
+   ATAPI implementations.  If you know your drive follows the standard,
+   this will give you a slightly smaller kernel. */
+
+#ifndef STANDARD_ATAPI
+#define STANDARD_ATAPI 0
+#endif
+
+
+/* Turning this on will disable the door-locking functionality.
+   This is apparently needed for supermount. */
+
+#ifndef NO_DOOR_LOCKING
+#define NO_DOOR_LOCKING 0
+#endif
+
+
+/* Size of buffer to allocate, in blocks, for audio reads. */
+
+#ifndef CDROM_NBLOCKS_BUFFER
+#define CDROM_NBLOCKS_BUFFER 8
+#endif
+
+
+/************************************************************************/
+
+#define SECTOR_SIZE 512
+#define SECTOR_BITS 9
+#define SECTORS_PER_FRAME (CD_FRAMESIZE / SECTOR_SIZE)
+
+#define MIN(a,b) ((a) < (b) ? (a) : (b))
+
+/* special command codes for strategy routine. */
+#define PACKET_COMMAND        4315
+#define REQUEST_SENSE_COMMAND 4316
+#define RESET_DRIVE_COMMAND   4317
+
+/*
+ * For controlling drive spindown time.
+ */
+#define CDROMGETSPINDOWN        0x531d
+#define CDROMSETSPINDOWN        0x531e
+ 
+
+/* Some ATAPI command opcodes (just like SCSI).
+   (Some other cdrom-specific codes are in cdrom.h.) */
+#define TEST_UNIT_READY         0x00
+#define REQUEST_SENSE           0x03
+#define START_STOP              0x1b
+#define ALLOW_MEDIUM_REMOVAL    0x1e
+#define READ_CAPACITY		0x25
+#define READ_10                 0x28
+#define MODE_SENSE_10           0x5a
+#define MODE_SELECT_10          0x55
+#define READ_CD                 0xbe
+
+#define LOAD_UNLOAD             0xa6
+#define MECHANISM_STATUS        0xbd
+
+
+/* Page codes for mode sense/set */
+
+#define PAGE_READERR            0x01
+#define PAGE_CDROM              0x0d
+#define PAGE_AUDIO              0x0e
+#define PAGE_CAPABILITIES       0x2a
+#define PAGE_ALL                0x3f
+
+
+/* ATAPI sense keys (mostly copied from scsi.h). */
+
+#define NO_SENSE                0x00
+#define RECOVERED_ERROR         0x01
+#define NOT_READY               0x02
+#define MEDIUM_ERROR            0x03
+#define HARDWARE_ERROR          0x04
+#define ILLEGAL_REQUEST         0x05
+#define UNIT_ATTENTION          0x06
+#define DATA_PROTECT            0x07
+#define ABORTED_COMMAND         0x0b
+#define MISCOMPARE              0x0e
+
+/* We want some additional flags for cd-rom drives.
+   To save space in the ide_drive_t struct, use some fields which
+   doesn't make sense for cd-roms -- `bios_cyl' and `bios_head'. */
+
+/* Configuration flags.  These describe the capabilities of the drive.
+   They generally do not change after initialization, unless we learn
+   more about the drive from stuff failing. */
+struct ide_cd_config_flags {
+	__u8 drq_interrupt    : 1; /* Device sends an interrupt when ready
+				      for a packet command. */
+	__u8 no_doorlock      : 1; /* Drive cannot lock the door. */
+	__u8 nec260           : 1; /* Drive is a pre-1.2 NEC 260 drive. */
+	__u8 playmsf_as_bcd   : 1; /* PLAYMSF command takes BCD args. */
+	__u8 tocaddr_as_bcd   : 1; /* TOC addresses are in BCD. */
+	__u8 toctracks_as_bcd : 1; /* TOC track numbers are in BCD. */
+	__u8 subchan_as_bcd   : 1; /* Subchannel info is in BCD. */
+	__u8 is_changer       : 1; /* Drive is a changer. */
+	__u8 supp_disc_present: 1; /* Changer can report exact contents
+				      of slots. */
+	__u8 reserved         : 7;
+};
+#define CDROM_CONFIG_FLAGS(drive) ((struct ide_cd_config_flags *)&((drive)->bios_cyl))
+
+ 
+/* State flags.  These give information about the current state of the
+   drive, and will change during normal operation. */
+struct ide_cd_state_flags {
+	__u8 media_changed : 1; /* Driver has noticed a media change. */
+	__u8 toc_valid     : 1; /* Saved TOC information is current. */
+	__u8 door_locked   : 1; /* We think that the drive door is locked. */
+	__u8 sanyo_slot    : 2; /* Sanyo 3 CD changer support */
+	__u8 reserved      : 3;
+};
+#define CDROM_STATE_FLAGS(drive)  ((struct ide_cd_state_flags *)&((drive)->bios_head))
+
+
+struct atapi_request_sense {
+	unsigned char error_code : 7;
+	unsigned char valid      : 1;
+	byte reserved1;
+	unsigned char sense_key  : 4;
+	unsigned char reserved2  : 1;
+	unsigned char ili        : 1;
+	unsigned char reserved3  : 2;
+	byte info[4];
+	byte sense_len;
+	byte command_info[4];
+	byte asc;
+	byte ascq;
+	byte fru;
+	byte sense_key_specific[3];
+};
+
+struct packet_command {
+	char *buffer;
+	int buflen;
+	int stat;
+	struct atapi_request_sense *sense_data;
+	unsigned char c[12];
+};
+
+/* Structure of a MSF cdrom address. */
+struct atapi_msf {
+	byte reserved;
+	byte minute;
+	byte second;
+	byte frame;
+};
+
+/* Space to hold the disk TOC. */
+#define MAX_TRACKS 99
+struct atapi_toc_header {
+	unsigned short toc_length;
+	byte first_track;
+	byte last_track;
+};
+
+struct atapi_toc_entry {
+	byte reserved1;
+	unsigned control : 4;
+	unsigned adr     : 4;
+	byte track;
+	byte reserved2;
+	union {
+		unsigned lba;
+		struct atapi_msf msf;
+	} addr;
+};
+
+struct atapi_toc {
+	int    last_session_lba;
+	int    xa_flag;
+	unsigned capacity;
+	struct atapi_toc_header hdr;
+	struct atapi_toc_entry  ent[MAX_TRACKS+1];
+	  /* One extra for the leadout. */
+};
+
+
+/* This structure is annoyingly close to, but not identical with,
+   the cdrom_subchnl structure from cdrom.h. */
+struct atapi_cdrom_subchnl {
+ 	u_char  acdsc_reserved;
+ 	u_char  acdsc_audiostatus;
+ 	u_short acdsc_length;
+	u_char  acdsc_format;
+
+	u_char  acdsc_adr:	4;
+	u_char  acdsc_ctrl:	4;
+	u_char  acdsc_trk;
+	u_char  acdsc_ind;
+	union {
+		struct atapi_msf msf;
+		int	lba;
+	} acdsc_absaddr;
+	union {
+		struct atapi_msf msf;
+		int	lba;
+	} acdsc_reladdr;
+};
+
+
+typedef enum {
+	mechtype_caddy = 0,
+	mechtype_tray  = 1,
+	mechtype_popup = 2,
+	mechtype_individual_changer = 4,
+	mechtype_cartridge_changer  = 5
+} mechtype_t;
+
+
+struct atapi_capabilities_page {
+	unsigned page_code           : 6;
+	unsigned reserved1           : 1;
+	unsigned parameters_saveable : 1;
+
+	byte     page_length;
+
+	/* Drive supports read from CD-R discs (orange book, part II) */
+        unsigned cd_r_read           : 1; /* reserved in 1.2 */
+	/* Drive supports read from CD-E discs (orange book, part III) */
+        unsigned cd_e_read           : 1; /* reserved in 1.2 */
+	/* Drive supports reading CD-R discs with addressing method 2 */
+	unsigned method2             : 1; /* reserved in 1.2 */
+	unsigned reserved2           : 5;
+
+	/* Drive supports write to CD-R discs (orange book, part II) */
+        unsigned cd_r_write          : 1; /* reserved in 1.2 */
+	/* Drive supports write to CD-E discs (orange book, part III) */
+        unsigned cd_e_write          : 1; /* reserved in 1.2 */
+	unsigned reserved3           : 6;
+
+	/* Drive supports audio play operations. */
+	unsigned audio_play          : 1;
+	/* Drive can deliver a composite audio/video data stream. */
+	unsigned composite           : 1;
+	/* Drive supports digital output on port 1. */
+	unsigned digport1            : 1;
+	/* Drive supports digital output on port 2. */
+	unsigned digport2            : 1;
+	/* Drive can read mode 2, form 1 (XA) data. */
+	unsigned mode2_form1         : 1;
+	/* Drive can read mode 2, form 2 data. */
+	unsigned mode2_form2         : 1;
+	/* Drive can read multisession discs. */
+	unsigned multisession        : 1;
+	unsigned reserved4           : 1;
+
+	/* Drive can read Red Book audio data. */
+	unsigned cdda                : 1;
+	/* Drive can continue a read cdda operation from a loss of streaming.*/
+	unsigned cdda_accurate       : 1;
+	/* Subchannel reads can return combined R-W information. */
+	unsigned rw_supported        : 1;
+	/* R-W data will be returned deinterleaved and error corrected. */
+	unsigned rw_corr             : 1;
+	/* Drive supports C2 error pointers. */
+	unsigned c2_pointers         : 1;
+	/* Drive can return International Standard Recording Code info. */
+	unsigned isrc                : 1;
+	/* Drive can return Media Catalog Number (UPC) info. */
+	unsigned upc                 : 1;
+	unsigned reserved5           : 1;
+
+	/* Drive can lock the door. */
+	unsigned lock                : 1;
+	/* Present state of door lock. */
+	unsigned lock_state          : 1;
+	/* State of prevent/allow jumper. */
+	unsigned prevent_jumper      : 1;
+	/* Drive can eject a disc or changer cartridge. */
+	unsigned eject               : 1;
+	unsigned reserved6           : 1;
+	/* Drive mechanism types. */
+	mechtype_t mechtype          : 3;
+
+	/* Audio level for each channel can be controlled independently. */
+	unsigned separate_volume     : 1;
+	/* Audio for each channel can be muted independently. */
+	unsigned separate_mute       : 1;
+	/* Changer can report exact contents of slots. */
+	unsigned disc_present        : 1;  /* reserved in 1.2 */
+	/* Drive supports software slot selection. */
+	unsigned sss                 : 1;  /* reserved in 1.2 */
+	unsigned reserved7           : 4;
+
+	/* Note: the following four fields are returned in big-endian form. */
+	/* Maximum speed (in kB/s). */
+	unsigned short maxspeed;
+	/* Number of discrete volume levels. */
+	unsigned short n_vol_levels;
+	/* Size of cache in drive, in kB. */
+	unsigned short buffer_size;
+	/* Current speed (in kB/s). */
+	unsigned short curspeed;
+
+	/* Truncate the structure here, so we don't have headaches reading
+	   from older drives. */
+};
+
+
+struct atapi_mechstat_header {
+	unsigned curslot       : 5;
+	unsigned changer_state : 2;
+	unsigned fault         : 1;
+
+	unsigned reserved1     : 5;
+	unsigned mech_state    : 3;
+
+	byte     curlba[3];
+	byte     nslots;
+	unsigned short slot_tablelen;
+};
+
+
+struct atapi_slot {
+	unsigned change       : 1;
+	unsigned reserved1    : 6;
+	unsigned disc_present : 1;
+
+	byte reserved2[3];
+};
+
+
+struct atapi_changer_info {
+	struct atapi_mechstat_header hdr;
+	struct atapi_slot slots[0];
+};
+
+
+/* Extra per-device info for cdrom drives. */
+struct cdrom_info {
+
+	/* Buffer for table of contents.  NULL if we haven't allocated
+	   a TOC buffer for this device yet. */
+
+	struct atapi_toc *toc;
+
+	/* Sector buffer.  If a read request wants only the first part
+	   of a cdrom block, we cache the rest of the block here,
+	   in the expectation that that data is going to be wanted soon.
+	   SECTOR_BUFFERED is the number of the first buffered sector,
+	   and NSECTORS_BUFFERED is the number of sectors in the buffer.
+	   Before the buffer is allocated, we should have
+	   SECTOR_BUFFER == NULL and NSECTORS_BUFFERED == 0. */
+
+	unsigned long sector_buffered;
+	unsigned long nsectors_buffered;
+	char *sector_buffer;
+
+	/* The result of the last successful request sense command
+	   on this device. */
+	struct atapi_request_sense sense_data;
+
+	struct request request_sense_request;
+	struct packet_command request_sense_pc;
+	int dma;
+	/* Buffer to hold mechanism status and changer slot table. */
+	struct atapi_changer_info *changer_info;
+
+
+        /* Per-device info needed by cdrom.c generic driver. */
+        struct cdrom_device_info devinfo;
+};
+
+
+#define SECTOR_BUFFER_SIZE CD_FRAMESIZE
+
+
+/****************************************************************************
+ * Descriptions of ATAPI error codes.
+ */
+
+#define ARY_LEN(a) ((sizeof(a) / sizeof(a[0])))
+
+#if VERBOSE_IDE_CD_ERRORS
+
+/* From Table 124 of the ATAPI 1.2 spec.
+   Unchanged in Table 140 of the ATAPI 2.6 draft standard. */
+
+char *sense_key_texts[16] = {
+	"No sense data",
+	"Recovered error",
+	"Not ready",
+	"Medium error",
+	"Hardware error",
+	"Illegal request",
+	"Unit attention",
+	"Data protect",
+	"(reserved)",
+	"(reserved)",
+	"(reserved)",
+	"Aborted command",
+	"(reserved)",
+	"(reserved)",
+	"Miscompare",
+	"(reserved)",
+};
+
+
+/* From Table 125 of the ATAPI 1.2 spec.,
+   with additions from Tables 141 and 142 of the ATAPI 2.6 draft standard. */
+
+struct {
+	short asc_ascq;
+	char *text;
+} sense_data_texts[] = {
+	{ 0x0000, "No additional sense information" },
+
+	{ 0x0011, "Audio play operation in progress" },
+	{ 0x0012, "Audio play operation paused" },
+	{ 0x0013, "Audio play operation successfully completed" },
+	{ 0x0014, "Audio play operation stopped due to error" },
+	{ 0x0015, "No current audio status to return" },
+
+	{ 0x0100, "Mechanical positioning or changer error" },
+
+	{ 0x0200, "No seek complete" },
+
+	{ 0x0400, "Logical unit not ready - cause not reportable" },
+	{ 0x0401,
+	  "Logical unit not ready - in progress (sic) of becoming ready" },
+	{ 0x0402, "Logical unit not ready - initializing command required" },
+	{ 0x0403, "Logical unit not ready - manual intervention required" },
+
+	{ 0x0501, "Media load - eject failed" },
+
+	{ 0x0600, "No reference position found" },
+
+	{ 0x0900, "Track following error" },
+	{ 0x0901, "Tracking servo failure" },
+	{ 0x0902, "Focus servo failure" },
+	{ 0x0903, "Spindle servo failure" },
+
+	{ 0x1100, "Unrecovered read error" },
+	{ 0x1106, "CIRC unrecovered error" },
+
+	{ 0x1500, "Random positioning error" },
+	{ 0x1501, "Mechanical positioning or changer error" },
+	{ 0x1502, "Positioning error detected by read of medium" },
+
+	{ 0x1700, "Recovered data with no error correction applied" },
+	{ 0x1701, "Recovered data with retries" },
+	{ 0x1702, "Recovered data with positive head offset" },
+	{ 0x1703, "Recovered data with negative head offset" },
+	{ 0x1704, "Recovered data with retries and/or CIRC applied" },
+	{ 0x1705, "Recovered data using previous sector ID" },
+
+	{ 0x1800, "Recovered data with error correction applied" },
+	{ 0x1801, "Recovered data with error correction and retries applied" },
+	{ 0x1802, "Recovered data - the data was auto-reallocated" },
+	{ 0x1803, "Recovered data with CIRC" },
+	{ 0x1804, "Recovered data with L-EC" },
+	/* Following two not in 2.6. */
+	{ 0x1805, "Recovered data - recommend reassignment" },
+	{ 0x1806, "Recovered data - recommend rewrite" },
+
+	{ 0x1a00, "Parameter list length error" },
+
+	{ 0x2000, "Invalid command operation code" },
+
+	{ 0x2100, "Logical block address out of range" },
+
+	{ 0x2400, "Invalid field in command packet" },
+
+	{ 0x2600, "Invalid field in parameter list" },
+	{ 0x2601, "Parameter not supported" },
+	{ 0x2602, "Parameter value invalid" },
+	/* Following code not in 2.6. */
+	{ 0x2603, "Threshold parameters not supported" },
+
+	{ 0x2800, "Not ready to ready transition, medium may have changed" },
+
+	{ 0x2900, "Power on, reset or bus device reset occurred" },
+
+	{ 0x2a00, "Parameters changed" },
+	{ 0x2a01, "Mode parameters changed" },
+
+	{ 0x3000, "Incompatible medium installed" },
+	{ 0x3001, "Cannot read medium - unknown format" },
+	{ 0x3002, "Cannot read medium - incompatible format" },
+
+	/* Following code not in 2.6. */
+	{ 0x3700, "Rounded parameter" },
+
+	{ 0x3900, "Saving parameters not supported" },
+
+	{ 0x3a00, "Medium not present" },
+
+	{ 0x3f00, "ATAPI CD-ROM drive operating conditions have changed" },
+	{ 0x3f01, "Microcode has been changed" },
+	/* Following two not in 2.6. */
+	{ 0x3f02, "Changed operating definition" },
+	{ 0x3f03, "Inquiry data has changed" },
+
+	{ 0x4000, "Diagnostic failure on component (ASCQ)" },
+
+	{ 0x4400, "Internal ATAPI CD-ROM drive failure" },
+
+	{ 0x4e00, "Overlapped commands attempted" },
+
+	{ 0x5300, "Media load or eject failed" },
+	{ 0x5302, "Medium removal prevented" },
+
+	{ 0x5700, "Unable to recover table of contents" },
+
+	{ 0x5a00, "Operator request or state change input (unspecified)" },
+	{ 0x5a01, "Operator medium removal request" },
+
+	/* Following two not in 2.6. */
+	{ 0x5b00, "Threshold condition met" },
+	{ 0x5c00, "Status change" },
+
+	{ 0x6300, "End of user area encountered on this track" },
+
+	{ 0x6400, "Illegal mode for this track" },
+
+	{ 0xb900, "Play operation oborted (sic)" },
+
+	{ 0xbf00, "Loss of streaming" },
+};
+#endif
+
+
+#endif /* _IDE_CD_H */