diff options
author | Ralf Baechle <ralf@linux-mips.org> | 2000-05-12 21:05:59 +0000 |
---|---|---|
committer | Ralf Baechle <ralf@linux-mips.org> | 2000-05-12 21:05:59 +0000 |
commit | ba2dacab305c598cd4c34a604f8e276bf5bab5ff (patch) | |
tree | 78670a0139bf4d5ace617b29b7eba82bbc74d602 /drivers/net/8139too.c | |
parent | b77bf69998121e689c5e86cc5630d39a0a9ee6ca (diff) |
Merge with Linux 2.3.99-pre7 and various other bits.
Diffstat (limited to 'drivers/net/8139too.c')
-rw-r--r-- | drivers/net/8139too.c | 582 |
1 files changed, 358 insertions, 224 deletions
diff --git a/drivers/net/8139too.c b/drivers/net/8139too.c index ce573e312..9a5b25038 100644 --- a/drivers/net/8139too.c +++ b/drivers/net/8139too.c @@ -84,10 +84,11 @@ an MMIO register read. #include <linux/ioport.h> #include <linux/netdevice.h> #include <linux/etherdevice.h> +#include <linux/delay.h> #include <asm/io.h> -#define RTL8139_VERSION "0.9.4" +#define RTL8139_VERSION "0.9.4.1" #define RTL8139_MODULE_NAME "8139too" #define RTL8139_DRIVER_NAME RTL8139_MODULE_NAME " Fast Ethernet driver " RTL8139_VERSION #define PFX RTL8139_MODULE_NAME ": " @@ -122,6 +123,9 @@ an MMIO register read. /* A few user-configurable values. */ +/* media options */ +static int media[] = {-1, -1, -1, -1, -1, -1, -1, -1}; + /* Maximum events (Rx packets, etc.) to handle at each interrupt. */ static int max_interrupt_work = 20; @@ -132,17 +136,24 @@ static int multicast_filter_limit = 32; /* Size of the in-memory receive ring. */ #define RX_BUF_LEN_IDX 2 /* 0==8K, 1==16K, 2==32K, 3==64K */ #define RX_BUF_LEN (8192 << RX_BUF_LEN_IDX) +#define RX_BUF_PAD 16 +#define RX_BUF_TOT_LEN (RX_BUF_LEN + RX_BUF_PAD) + +/* Number of Tx descriptor registers. */ +#define NUM_TX_DESC 4 + /* Size of the Tx bounce buffers -- must be at least (dev->mtu+14+4). */ #define TX_BUF_SIZE 1536 +#define TX_BUF_TOT_LEN (TX_BUF_SIZE * NUM_TX_DESC) /* PCI Tuning Parameters Threshold is bytes transferred to chip before transmission starts. */ #define TX_FIFO_THRESH 256 /* In bytes, rounded down to 32 byte units. */ -/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024. */ +/* The following settings are log_2(bytes)-4: 0 == 16 bytes .. 6==1024, 7==end of packet. */ #define RX_FIFO_THRESH 4 /* Rx buffer level before first PCI xfer. */ -#define RX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 bytes */ -#define TX_DMA_BURST 4 /* Calculate as 16<<val. */ +#define RX_DMA_BURST 4 /* Maximum PCI burst, '7' is unlimited */ +#define TX_DMA_BURST 4 /* Maximum PCI burst, '4' is 256 */ /* Operational parameters that usually are not changed. */ @@ -156,7 +167,7 @@ enum { }; #define RTL_MIN_IO_SIZE 0x80 -#define RTL8139B_IO_SIZE 0xFF +#define RTL8139B_IO_SIZE 256 #define RTL8139_CAPS HAS_CHIP_XCVR|HAS_LNK_CHNG @@ -167,13 +178,13 @@ typedef enum { /*MPX5030,*/ DELTA8139, ADDTRON8139, -} chip_t; +} board_t; -/* indexed by chip_t, above */ +/* indexed by board_t, above */ static struct { const char *name; -} chip_info[] __devinitdata = { +} board_info[] __devinitdata = { { "RealTek RTL8139 Fast Ethernet" }, { "RealTek RTL8139B PCI/CardBus" }, { "SMC1211TX EZCard 10/100 (RealTek RTL8139)" }, @@ -196,7 +207,6 @@ MODULE_DEVICE_TABLE (pci, rtl8139_pci_tbl); /* The rest of these values should never change. */ -#define NUM_TX_DESC 4 /* Number of Tx descriptor registers. */ /* Symbolic offsets to registers. */ enum RTL8139_registers { @@ -220,8 +230,8 @@ enum RTL8139_registers { Config0 = 0x51, Config1 = 0x52, FlashReg = 0x54, - GPPinData = 0x58, - GPPinDir = 0x59, + MediaStatus = 0x58, + Config3 = 0x59, Config4 = 0x5A, /* absent on RTL-8139A */ HltClk = 0x5B, MultiIntr = 0x5C, @@ -236,6 +246,13 @@ enum RTL8139_registers { CSCR = 0x74, /* Chip Status and Configuration Register. */ PARA78 = 0x78, PARA7c = 0x7c, /* Magic transceiver parameter register. */ + Config5 = 0xD8, /* absent on RTL-8139A */ +}; + +enum ClearBitMasks { + MultiIntrClear = 0xF000, + ChipCmdClear = 0xE2, + Config1Clear = (1<<7)|(1<<6)|(1<<3)|(1<<2)|(1<<1), }; enum ChipCmdBits { @@ -300,6 +317,19 @@ enum Config1Bits { }; enum RxConfigBits { + /* Early Rx threshold, none or X/16 */ + RxCfgEarlyRxNone = 0, + RxCfgEarlyRxShift = 24, + + /* rx fifo threshold */ + RxCfgFIFOShift = 13, + RxCfgFIFONone = (7 << RxCfgFIFOShift), + + /* Max DMA burst */ + RxCfgDMAShift = 8, + RxCfgDMAUnlimited = (7 << RxCfgDMAShift), + + /* rx ring buffer length */ RxCfgRcv8K = 0, RxCfgRcv16K = (1 << 11), RxCfgRcv32K = (1 << 12), @@ -339,10 +369,33 @@ struct ring_info { dma_addr_t mapping; }; +typedef enum { + CH_8139 = 0, + CH_8139A, + CH_8139B, +} chip_t; + +/* directly indexed by chip_t, above */ +const static struct { + const char *name; + u32 RxConfigMask; /* should clear the bits supported by this chip */ +} rtl_chip_info[] = { + { "RTL-8139", + 0xf0fe0040, /* XXX copied from RTL8139A, verify */ + }, + + { "RTL-8139A", + 0xf0fe0040, + }, + + { "RTL-8139B(L)", + 0xf0fc0040 + }, +}; + -#define PRIV_ALIGN 15 /* Required alignment mask */ struct rtl8139_private { - chip_t chip; + board_t board; void *mmio_addr; int drv_flags; struct pci_dev *pci_dev; @@ -350,7 +403,9 @@ struct rtl8139_private { struct timer_list timer; /* Media selection timer. */ unsigned char *rx_ring; unsigned int cur_rx; /* Index into the Rx buffer of next Rx pkt. */ - unsigned int cur_tx, dirty_tx, tx_flag; + unsigned int tx_flag; + atomic_t cur_tx; + atomic_t dirty_tx; /* The saved address of a sent-in-place packet/buffer, for skfree(). */ struct ring_info tx_info[NUM_TX_DESC]; unsigned char *tx_buf[NUM_TX_DESC]; /* Tx bounce buffers */ @@ -365,8 +420,8 @@ struct rtl8139_private { unsigned int media2:4; /* Secondary monitored media port. */ unsigned int medialock:1; /* Don't sense media type. */ unsigned int mediasense:1; /* Media sensing in progress. */ - int extended_regs; /* bool: supports regs > 0x80 ? */ spinlock_t lock; + chip_t chipset; }; MODULE_AUTHOR ("Jeff Garzik <jgarzik@mandrakesoft.com>"); @@ -374,6 +429,7 @@ MODULE_DESCRIPTION ("RealTek RTL-8139 Fast Ethernet driver"); MODULE_PARM (multicast_filter_limit, "i"); MODULE_PARM (max_interrupt_work, "i"); MODULE_PARM (debug, "i"); +MODULE_PARM (media, "1-" __MODULE_STRING(8) "i"); static int read_eeprom (void *ioaddr, int location, int addr_len); static int rtl8139_open (struct net_device *dev); @@ -429,17 +485,21 @@ static const u16 rtl8139_intr_mask = TxErr | TxOK | RxErr | RxOK; static const unsigned int rtl8139_rx_config = - (RX_FIFO_THRESH << 13) | (RxCfgRcv32K) | - (RX_DMA_BURST << 8); + RxCfgEarlyRxNone | RxCfgFIFONone | RxCfgRcv32K | RxCfgDMAUnlimited; -static int __devinit rtl8139_init_pci (struct pci_dev *pdev, void **ioaddr_out) +static int __devinit rtl8139_init_board (struct pci_dev *pdev, + struct net_device **dev_out, + void **ioaddr_out) { void *ioaddr = NULL; + struct net_device *dev; + struct rtl8139_private *tp; u8 tmp8; - int rc; + int rc, i; u32 pio_start, pio_end, pio_flags, pio_len; unsigned long mmio_start, mmio_end, mmio_flags, mmio_len; + u32 tmp; DPRINTK ("ENTER\n"); @@ -447,6 +507,16 @@ static int __devinit rtl8139_init_pci (struct pci_dev *pdev, void **ioaddr_out) assert (ioaddr_out != NULL); *ioaddr_out = NULL; + *dev_out = NULL; + + /* dev zeroed in init_etherdev */ + dev = init_etherdev (NULL, sizeof (*tp)); + if (dev == NULL) { + printk (KERN_ERR PFX "unable to alloc new ethernet\n"); + DPRINTK ("EXIT, returning -ENOMEM\n"); + return -ENOMEM; + } + tp = dev->priv; pio_start = pci_resource_start (pdev, 0); pio_end = pci_resource_end (pdev, 0); @@ -458,6 +528,13 @@ static int __devinit rtl8139_init_pci (struct pci_dev *pdev, void **ioaddr_out) mmio_flags = pci_resource_flags (pdev, 1); mmio_len = pci_resource_len (pdev, 1); + /* set this immediately, we need to know before + * we talk to the chip directly */ + DPRINTK("PIO region size == 0x%02X\n", pio_len); + DPRINTK("MMIO region size == 0x%02X\n", mmio_len); + if (pio_len == RTL8139B_IO_SIZE) + tp->chipset = CH_8139B; + /* make sure PCI base addr 0 is PIO */ if (!(pio_flags & IORESOURCE_IO)) { printk (KERN_ERR PFX "region #0 not a PIO resource, aborting\n"); @@ -482,14 +559,14 @@ static int __devinit rtl8139_init_pci (struct pci_dev *pdev, void **ioaddr_out) } /* make sure our PIO region in PCI space is available */ - if (!request_region (pio_start, pio_len, RTL8139_MODULE_NAME)) { + if (!request_region (pio_start, pio_len, dev->name)) { printk (KERN_ERR PFX "no I/O resource available, aborting\n"); rc = -EBUSY; goto err_out; } /* make sure our MMIO region in PCI space is available */ - if (!request_mem_region (mmio_start, mmio_len, RTL8139_MODULE_NAME)) { + if (!request_mem_region (mmio_start, mmio_len, dev->name)) { printk (KERN_ERR PFX "no mem resource available, aborting\n"); rc = -EBUSY; goto err_out_free_pio; @@ -514,9 +591,32 @@ static int __devinit rtl8139_init_pci (struct pci_dev *pdev, void **ioaddr_out) goto err_out_free_mmio; } + /* Soft reset the chip. */ + RTL_W8 (ChipCmd, (RTL_R8 (ChipCmd) & ChipCmdClear) | CmdReset); + + /* Check that the chip has finished the reset. */ + for (i = 1000; i > 0; i--) + if ((RTL_R8 (ChipCmd) & CmdReset) == 0) + break; + else + udelay (10); + /* Bring the chip out of low-power mode. */ - RTL_W8 (Config1, 0x00); + if (tp->chipset == CH_8139B) { + RTL_W8 (Config1, RTL_R8 (Config1) & ~(1<<4)); + RTL_W8 (Config4, RTL_R8 (Config4) & ~(1<<2)); + } else { + /* handle RTL8139A and RTL8139 cases */ + /* XXX from becker driver. is this right?? */ + RTL_W8 (Config1, 0); + } + /* sanity checks -- ensure PIO and MMIO registers agree */ + assert (inb (pio_start+Config0) == readb (ioaddr+Config0)); + assert (inb (pio_start+Config1) == readb (ioaddr+Config1)); + assert (inb (pio_start+TxConfig) == readb (ioaddr+TxConfig)); + assert (inb (pio_start+RxConfig) == readb (ioaddr+RxConfig)); + /* make sure chip thinks PIO and MMIO are enabled */ tmp8 = RTL_R8 (Config1); if ((tmp8 & Cfg1_PIO) == 0) { @@ -530,14 +630,26 @@ static int __devinit rtl8139_init_pci (struct pci_dev *pdev, void **ioaddr_out) goto err_out_iounmap; } - /* sanity checks -- ensure PIO and MMIO registers agree */ - assert (inb (pio_start+Config0) == RTL_R8 (Config0)); - assert (inb (pio_start+Config1) == RTL_R8 (Config1)); - assert (inb (pio_start+TxConfig) == RTL_R8 (TxConfig)); - assert (inb (pio_start+RxConfig) == RTL_R8 (RxConfig)); - + /* identify chip attached to board */ + tmp = RTL_R32 (TxConfig); + if (((tmp >> 28) & 7) == 7) { + if (pio_len == RTL8139B_IO_SIZE) + tp->chipset = CH_8139B; + else + tp->chipset = CH_8139A; + } else { + tp->chipset = CH_8139; + } + DPRINTK ("chipset id (%d/%d/%d) == %d, '%s'\n", + CH_8139, + CH_8139A, + CH_8139B, + tp->chipset, + rtl_chip_info[tp->chipset].name); + DPRINTK ("EXIT, returning 0\n"); *ioaddr_out = ioaddr; + *dev_out = dev; return 0; err_out_iounmap: @@ -548,6 +660,8 @@ err_out_free_mmio: err_out_free_pio: release_region (pio_start, pio_len); err_out: + unregister_netdev (dev); + kfree (dev); DPRINTK ("EXIT, returning %d\n", rc); return rc; } @@ -556,10 +670,12 @@ err_out: static int __devinit rtl8139_init_one (struct pci_dev *pdev, const struct pci_device_id *ent) { - struct net_device *dev; + struct net_device *dev = NULL; struct rtl8139_private *tp; - int i, addr_len, option = -1; + int i, addr_len, option; void *ioaddr = NULL; + static int board_idx = -1; + u8 tmp; #ifndef RTL8139_NDEBUG static int printed_version = 0; @@ -570,29 +686,24 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, assert (pdev != NULL); assert (ent != NULL); -#ifndef RTL8139_NDEBUG + board_idx++; + if (!printed_version) { printk (KERN_INFO RTL8139_DRIVER_NAME " loaded\n"); printed_version = 1; } -#endif /* RTL8139_NDEBUG */ - i = rtl8139_init_pci (pdev, &ioaddr); + i = rtl8139_init_board (pdev, &dev, &ioaddr); if (i < 0) { DPRINTK ("EXIT, returning %d\n", i); return i; } + tp = dev->priv; + assert (ioaddr != NULL); - - /* dev zeroed in init_etherdev */ - dev = init_etherdev (NULL, sizeof (*tp) + PRIV_ALIGN); - if (dev == NULL) { - iounmap (ioaddr); - printk (KERN_ERR PFX "unable to alloc new ethernet\n"); - DPRINTK ("EXIT, returning -ENOMEM\n"); - return -ENOMEM; - } + assert (dev != NULL); + assert (tp != NULL); addr_len = read_eeprom (ioaddr, 0, 8) == 0x8129 ? 8 : 6; for (i = 0; i < 3; i++) @@ -612,38 +723,47 @@ static int __devinit rtl8139_init_one (struct pci_dev *pdev, dev->irq = pdev->irq; dev->base_addr = pci_resource_start (pdev, 1); - /* dev->priv/tp zeroed in init_etherdev */ - dev->priv = tp = (void *) - (((long)dev->priv + PRIV_ALIGN) & ~PRIV_ALIGN); + /* dev->priv/tp zeroed and aligned in init_etherdev */ + tp = dev->priv; + /* note: tp->chipset set in rtl8139_init_board */ tp->drv_flags = PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER | RTL8139_CAPS; tp->pci_dev = pdev; - tp->chip = ent->driver_data; + tp->board = ent->driver_data; tp->mmio_addr = ioaddr; - tp->extended_regs = - (pci_resource_len (pdev, 0) == RTL8139B_IO_SIZE) ? 1 : 0; tp->lock = SPIN_LOCK_UNLOCKED; PCI_SET_DRIVER_DATA (pdev, dev); tp->phys[0] = 32; - printk (KERN_INFO "%s: %s at 0x%lx, IRQ %d,%s " + printk (KERN_INFO "%s: '%s' board found at 0x%lx, IRQ %d\n", + dev->name, board_info[ent->driver_data].name, + dev->base_addr, dev->irq); + + printk (KERN_INFO "%s: Chip is '%s'\n", + dev->name, + rtl_chip_info[tp->chipset].name); + + printk (KERN_INFO "%s: MAC address " "%2.2x:%2.2x:%2.2x:%2.2x:%2.2x:%2.2x.\n", - dev->name, chip_info[ent->driver_data].name, - dev->base_addr, dev->irq, - tp->extended_regs ? " 8139B regs," : "", + dev->name, dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2], dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5]); /* Put the chip into low-power mode. */ - RTL_W8 (Cfg9346, Cfg9346_Unlock); - RTL_W8 (Config1, 0x03); /* Enable PM & PCI VPD */ - RTL_W8 (HltClk, 'H'); /* 'R' would leave the clock running. */ + RTL_W8_F (Cfg9346, Cfg9346_Unlock); + + tmp = RTL_R8 (Config1) & Config1Clear; + tmp |= (tp->chipset == CH_8139B) ? 3 : 1; /* Enable PM/VPD */ + RTL_W8_F (Config1, tmp); + + RTL_W8_F (HltClk, 'H'); /* 'R' would leave the clock running. */ /* The lower four bits are the media type. */ + option = (board_idx > 7) ? 0 : media[board_idx]; if (option > 0) { tp->full_duplex = (option & 0x200) ? 1 : 0; tp->default_port = option & 15; @@ -686,10 +806,9 @@ static void __devexit rtl8139_remove_one (struct pci_dev *pdev) #ifndef RTL8139_NDEBUG /* poison memory before freeing */ - memset (dev, 0xC0, + memset (dev, 0xBC, sizeof (struct net_device) + - sizeof (struct rtl8139_private) + - PRIV_ALIGN); + sizeof (struct rtl8139_private)); #endif /* RTL8139_NDEBUG */ kfree (dev); @@ -911,18 +1030,18 @@ static int rtl8139_open (struct net_device *dev) return -EBUSY; } - tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_SIZE * NUM_TX_DESC, + tp->tx_bufs = pci_alloc_consistent(tp->pci_dev, TX_BUF_TOT_LEN, &tp->tx_bufs_dma); - tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_LEN + 16, + tp->rx_ring = pci_alloc_consistent(tp->pci_dev, RX_BUF_TOT_LEN, &tp->rx_ring_dma); if (tp->tx_bufs == NULL || tp->rx_ring == NULL) { free_irq(dev->irq, dev); if (tp->tx_bufs) - pci_free_consistent(tp->pci_dev, TX_BUF_SIZE * NUM_TX_DESC, + pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN, tp->tx_bufs, tp->tx_bufs_dma); if (tp->rx_ring) - pci_free_consistent(tp->pci_dev, RX_BUF_LEN + 16, + pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN, tp->rx_ring, tp->rx_ring_dma); DPRINTK ("EXIT, returning -ENOMEM\n"); @@ -931,16 +1050,16 @@ static int rtl8139_open (struct net_device *dev) } - rtl8139_init_ring (dev); tp->full_duplex = tp->duplex_lock; tp->tx_flag = (TX_FIFO_THRESH << 11) & 0x003f0000; + rtl8139_init_ring (dev); rtl8139_hw_start (dev); DPRINTK ("%s: rtl8139_open() ioaddr %#lx IRQ %d" " GP Pins %2.2x %s-duplex.\n", dev->name, pci_resource_start (tp->pci_dev, 1), - dev->irq, RTL_R8 (GPPinData), + dev->irq, RTL_R8 (MediaStatus), tp->full_duplex ? "full" : "half"); /* Set the timer to switch to check for link beat and perhaps switch @@ -961,15 +1080,14 @@ static void rtl8139_hw_start (struct net_device *dev) { struct rtl8139_private *tp = (struct rtl8139_private *) dev->priv; void *ioaddr = tp->mmio_addr; - int i; - unsigned long flags; + u32 i; + u8 tmp; DPRINTK ("ENTER\n"); - spin_lock_irqsave (&tp->lock, flags); - /* Soft reset the chip. */ - RTL_W8 (ChipCmd, CmdReset); + RTL_W8 (ChipCmd, (RTL_R8 (ChipCmd) & ChipCmdClear) | CmdReset); + udelay (100); /* Check that the chip has finished the reset. */ for (i = 1000; i > 0; i--) @@ -981,53 +1099,100 @@ static void rtl8139_hw_start (struct net_device *dev) RTL_W32_F (MAC0 + 4, cpu_to_le32 (*(u32 *) (dev->dev_addr + 4))); /* unlock Config[01234] and BMCR register writes */ - RTL_W8 (Cfg9346, Cfg9346_Unlock); + RTL_W8_F (Cfg9346, Cfg9346_Unlock); + udelay (100); tp->cur_rx = 0; + /* init Rx ring buffer DMA address */ + RTL_W32_F (RxBuf, tp->rx_ring_dma); + + /* init Tx buffer DMA addresses */ + for (i = 0; i < NUM_TX_DESC; i++) + RTL_W32_F (TxAddr0 + (i * 4), tp->tx_bufs_dma + (tp->tx_buf[i] - tp->tx_bufs)); + /* Must enable Tx/Rx before setting transfer thresholds! */ - RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); - RTL_W32 (RxConfig, rtl8139_rx_config); - /* Check this value: the documentation contradicts ifself. Is the - IFG correct with bit 28:27 zero, or with |0x03000000 ? */ - RTL_W32 (TxConfig, (TX_DMA_BURST << 8) | 0x00000000); - - /* Reset N-Way to chipset defaults */ - RTL_W16 (BasicModeCtrl, (1<<15)|(1<<12)|(1<<9)); - for (i = 1000; i > 0; i--) - if ((RTL_R8 (BasicModeCtrl) & (1<<15)) == 0) - break; + RTL_W8_F (ChipCmd, (RTL_R8 (ChipCmd) & ChipCmdClear) | + CmdRxEnb | CmdTxEnb); + + i = rtl8139_rx_config | + (RTL_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); + RTL_W32_F (RxConfig, i); + + /* Check this value: the documentation for IFG contradicts ifself. */ + RTL_W32 (TxConfig, (TX_DMA_BURST << 8)); + + /* if link status not ok... */ + if ((RTL_R16 (BasicModeStatus) & (1<<2)) == 0) { + printk (KERN_INFO "%s: no link, starting NWay\n", dev->name); + + /* Reset N-Way to chipset defaults */ + RTL_W16 (BasicModeCtrl, RTL_R16 (BasicModeCtrl) | (1<<15)); + for (i = 1000; i > 0; i--) + if ((RTL_R8 (BasicModeCtrl) & (1<<15)) == 0) + break; - /* Set N-Way to sane defaults */ - RTL_W16 (FIFOTMS, 0x0000); - RTL_W16 (NWayAdvert, (1<<13)|(1<<8)|(1<<7)|(1<<6)|(1<<5)|0x1); - RTL_W16 (BasicModeCtrl, (1<<13)|(1<<12)|(1<<9)|(1<<8)); + /* Set N-Way to sane defaults */ + RTL_W16_F (FIFOTMS, RTL_R16 (FIFOTMS) & ~(1<<7)); + RTL_W16_F (NWayAdvert, RTL_R16 (NWayAdvert) | + (1<<13)|(1<<8)|(1<<7)|(1<<6)|(1<<5)|(1<<0)); + RTL_W16_F (BasicModeCtrl, RTL_R16 (BasicModeCtrl) | + (1<<13)|(1<<12)|(1<<9)|(1<<8)); + RTL_W8_F (MediaStatus, RTL_R8 (MediaStatus) | (1<<7) | (1<<6)); - /* check_duplex() here. */ - RTL_W8 (Config1, tp->full_duplex ? 0x60 : 0x20); + /* check_duplex() here. */ + /* XXX writing Config1 here is flat out wrong */ + /* RTL_W8 (Config1, tp->full_duplex ? 0x60 : 0x20); */ + } - /* lock Config[01234] and BMCR register writes */ - RTL_W8 (Cfg9346, Cfg9346_Lock); + tmp = RTL_R8 (Config1) & Config1Clear; + tmp |= (tp->chipset == CH_8139B) ? 3 : 1; /* Enable PM/VPD */ + RTL_W8_F (Config1, tmp); - RTL_W32 (RxBuf, tp->rx_ring_dma); + if (tp->chipset == CH_8139B) { + tmp = RTL_R8 (Config4) & ~(1<<2); + /* chip will clear Rx FIFO overflow automatically */ + tmp |= (1<<7); + RTL_W8 (Config4, tmp); + } + + /* disable magic packet scanning, which is enabled + * when PM is enabled above (Config1) */ + RTL_W8 (Config3, RTL_R8 (Config3) & ~(1<<5)); - /* Start the chip's Tx and Rx process. */ - RTL_W32 (RxMissed, 0); + RTL_W32_F (RxMissed, 0); - /* release lock cuz set_rx_mode wants it */ - spin_unlock_irqrestore (&tp->lock, flags); rtl8139_set_rx_mode (dev); - spin_lock_irqsave (&tp->lock, flags); - RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); + /* no early-rx interrupts */ + RTL_W16 (MultiIntr, RTL_R16 (MultiIntr) & MultiIntrClear); /* Enable all known interrupts by setting the interrupt mask. */ - RTL_W16 (IntrMask, rtl8139_intr_mask); + RTL_W16_F (IntrMask, rtl8139_intr_mask); - if (netif_queue_stopped (dev)) - netif_start_queue (dev); + netif_start_queue (dev); - spin_unlock_irqrestore (&tp->lock, flags); + DPRINTK ("EXIT\n"); +} + + +/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ +static void rtl8139_init_ring (struct net_device *dev) +{ + struct rtl8139_private *tp = (struct rtl8139_private *) dev->priv; + int i; + + DPRINTK ("ENTER\n"); + + tp->cur_rx = 0; + atomic_set (&tp->cur_tx, 0); + atomic_set (&tp->dirty_tx, 0); + + for (i = 0; i < NUM_TX_DESC; i++) { + tp->tx_info[i].skb = NULL; + tp->tx_info[i].mapping = 0; + tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; + } DPRINTK ("EXIT\n"); } @@ -1134,11 +1299,8 @@ static void rtl8139_timer (unsigned long data) void *ioaddr = tp->mmio_addr; int next_tick = 60 * HZ; int mii_reg5; - unsigned long flags; - DPRINTK ("ENTER\n"); - - spin_lock_irqsave (&tp->lock, flags); + spin_lock_irq (&tp->lock); mii_reg5 = mdio_read (dev, tp->phys[0], 5); @@ -1154,7 +1316,6 @@ static void rtl8139_timer (unsigned long data) tp->phys[0], mii_reg5); RTL_W8 (Cfg9346, Cfg9346_Unlock); RTL_W8 (Config1, tp->full_duplex ? 0x60 : 0x20); - RTL_W8 (Cfg9346, Cfg9346_Lock); } } @@ -1171,12 +1332,10 @@ static void rtl8139_timer (unsigned long data) dev->name, RTL_R8 (Config0), RTL_R8 (Config1)); - spin_unlock_irqrestore (&tp->lock, flags); + spin_unlock_irq (&tp->lock); tp->timer.expires = jiffies + next_tick; add_timer (&tp->timer); - - DPRINTK ("EXIT\n"); } @@ -1184,38 +1343,37 @@ static void rtl8139_tx_timeout (struct net_device *dev) { struct rtl8139_private *tp = (struct rtl8139_private *) dev->priv; void *ioaddr = tp->mmio_addr; - int mii_reg, i; - unsigned long flags; - - DPRINTK ("ENTER\n"); - - spin_lock_irqsave (&tp->lock, flags); + int i; DPRINTK ("%s: Transmit timeout, status %2.2x %4.4x " "media %2.2x.\n", dev->name, RTL_R8 (ChipCmd), RTL_R16 (IntrStatus), - RTL_R8 (GPPinData)); + RTL_R8 (MediaStatus)); + + spin_lock_irq (&tp->lock); /* Disable interrupts by clearing the interrupt mask. */ RTL_W16 (IntrMask, 0x0000); + + spin_unlock_irq (&tp->lock); + /* Emit info to figure out what went wrong. */ printk (KERN_DEBUG "%s: Tx queue start entry %d dirty entry %d.\n", - dev->name, tp->cur_tx, tp->dirty_tx); + dev->name, atomic_read (&tp->cur_tx), + atomic_read (&tp->dirty_tx)); for (i = 0; i < NUM_TX_DESC; i++) printk (KERN_DEBUG "%s: Tx descriptor %d is %8.8x.%s\n", dev->name, i, RTL_R32 (TxStatus0 + (i * 4)), i == - tp->dirty_tx % NUM_TX_DESC ? " (queue head)" : ""); - printk (KERN_DEBUG "%s: MII #%d registers are:", dev->name, - tp->phys[0]); - for (mii_reg = 0; mii_reg < 8; mii_reg++) - printk (" %4.4x", mdio_read (dev, tp->phys[0], mii_reg)); - printk (".\n"); + atomic_read (&tp->dirty_tx) % NUM_TX_DESC ? " (queue head)" : ""); + + spin_lock_irq (&tp->lock); /* Stop a shared interrupt from scavenging while we are. */ - tp->dirty_tx = tp->cur_tx = 0; + atomic_set (&tp->cur_tx, 0); + atomic_set (&tp->dirty_tx, 0); /* Dump the unsent Tx packets. */ for (i = 0; i < NUM_TX_DESC; i++) { @@ -1230,79 +1388,43 @@ static void rtl8139_tx_timeout (struct net_device *dev) rp->mapping = 0; } } - - spin_unlock_irqrestore (&tp->lock, flags); + + spin_unlock_irq (&tp->lock); rtl8139_hw_start (dev); - - DPRINTK ("EXIT\n"); } -/* Initialize the Rx and Tx rings, along with various 'dev' bits. */ -static void rtl8139_init_ring (struct net_device *dev) -{ - struct rtl8139_private *tp = (struct rtl8139_private *) dev->priv; - int i; - - DPRINTK ("ENTER\n"); - - tp->cur_rx = 0; - tp->dirty_tx = tp->cur_tx = 0; - - for (i = 0; i < NUM_TX_DESC; i++) { - tp->tx_info[i].skb = NULL; - tp->tx_info[i].mapping = 0; - tp->tx_buf[i] = &tp->tx_bufs[i * TX_BUF_SIZE]; - } - - DPRINTK ("EXIT\n"); -} - static int rtl8139_start_xmit (struct sk_buff *skb, struct net_device *dev) { struct rtl8139_private *tp = (struct rtl8139_private *) dev->priv; void *ioaddr = tp->mmio_addr; int entry; - unsigned long flags; - - DPRINTK ("ENTER\n"); - - spin_lock_irqsave (&tp->lock, flags); /* Calculate the next Tx descriptor entry. */ - entry = tp->cur_tx % NUM_TX_DESC; + entry = atomic_read (&tp->cur_tx) % NUM_TX_DESC; tp->tx_info[entry].skb = skb; - if ((long) skb->data & 3) { /* Must use alignment buffer. */ - tp->tx_info[entry].mapping = 0; - memcpy (tp->tx_buf[entry], skb->data, skb->len); + tp->tx_info[entry].mapping = 0; + memcpy (tp->tx_buf[entry], skb->data, skb->len); - assert (tp->tx_bufs_dma > 0); - RTL_W32 (TxAddr0 + entry * 4, tp->tx_bufs_dma + (tp->tx_buf[entry] - tp->tx_bufs)); - } else { - tp->tx_info[entry].mapping = - pci_map_single(tp->pci_dev, skb->data, skb->len, PCI_DMA_TODEVICE); + spin_lock_irq (&tp->lock); - assert (tp->tx_info[entry].mapping > 0); - RTL_W32 (TxAddr0 + entry * 4, tp->tx_info[entry].mapping); - } - /* Note: the chip doesn't have auto-pad! */ - RTL_W32 (TxStatus0 + entry * 4, + RTL_W32 (TxStatus0 + (entry * sizeof(u32)), tp->tx_flag | (skb->len >= ETH_ZLEN ? skb->len : ETH_ZLEN)); + spin_unlock_irq (&tp->lock); + dev->trans_start = jiffies; - if (++tp->cur_tx - tp->dirty_tx >= NUM_TX_DESC) + atomic_inc (&tp->cur_tx); + if ((atomic_read (&tp->cur_tx) - atomic_read (&tp->dirty_tx)) >= NUM_TX_DESC) netif_stop_queue (dev); - spin_unlock_irqrestore (&tp->lock, flags); - DPRINTK ("%s: Queued Tx packet at %p size %u to slot %d.\n", dev->name, skb->data, skb->len, entry); - DPRINTK ("EXIT\n"); return 0; } @@ -1317,12 +1439,19 @@ static inline void rtl8139_tx_interrupt (struct net_device *dev, assert (tp != NULL); assert (ioaddr != NULL); - dirty_tx = tp->dirty_tx; + /* drop lock held in rtl8139_interrupt */ + spin_unlock (&tp->lock); + + dirty_tx = atomic_read (&tp->dirty_tx); - while (tp->cur_tx - dirty_tx > 0) { + while ((atomic_read (&tp->cur_tx) - dirty_tx) > 0) { int entry = dirty_tx % NUM_TX_DESC; - int txstatus = RTL_R32 (TxStatus0 + (entry * 4)); + int txstatus; + spin_lock (&tp->lock); + txstatus = RTL_R32 (TxStatus0 + (entry * 4)); + spin_unlock (&tp->lock); + if (!(txstatus & (TxStatOK | TxUnderrun | TxAborted))) break; /* It still hasn't been Txed */ @@ -1334,7 +1463,9 @@ static inline void rtl8139_tx_interrupt (struct net_device *dev, tp->stats.tx_errors++; if (txstatus & TxAborted) { tp->stats.tx_aborted_errors++; - RTL_W32 (TxConfig, (TX_DMA_BURST << 8) | 0x03000001); + spin_lock (&tp->lock); + RTL_W32 (TxConfig, (TX_DMA_BURST << 8)); + spin_unlock (&tp->lock); } if (txstatus & TxCarrierLost) tp->stats.tx_carrier_errors++; @@ -1356,39 +1487,36 @@ static inline void rtl8139_tx_interrupt (struct net_device *dev, tp->stats.tx_packets++; } - if (tp->tx_info[entry].mapping != 0) { - pci_unmap_single (tp->pci_dev, - tp->tx_info[entry].mapping, - tp->tx_info[entry].skb->len, - PCI_DMA_TODEVICE); - tp->tx_info[entry].mapping = 0; - } /* Free the original skb. */ dev_kfree_skb_irq (tp->tx_info[entry].skb); tp->tx_info[entry].skb = NULL; dirty_tx++; - if (tp->cur_tx - dirty_tx < NUM_TX_DESC) + if (netif_queue_stopped (dev) && + (atomic_read (&tp->cur_tx) - dirty_tx < NUM_TX_DESC)) netif_wake_queue (dev); } #ifndef RTL8139_NDEBUG - if (tp->cur_tx - dirty_tx > NUM_TX_DESC) { + if (atomic_read (&tp->cur_tx) - dirty_tx > NUM_TX_DESC) { printk (KERN_ERR "%s: Out-of-sync dirty pointer, %d vs. %d.\n", - dev->name, dirty_tx, tp->cur_tx); + dev->name, dirty_tx, atomic_read (&tp->cur_tx)); dirty_tx += NUM_TX_DESC; } #endif /* RTL8139_NDEBUG */ - tp->dirty_tx = dirty_tx; + atomic_set (&tp->dirty_tx, dirty_tx); + + /* obtain lock need for rtl8139_interrupt */ + spin_lock (&tp->lock); } /* The data sheet doesn't describe the Rx ring at all, so I'm guessing at the field alignments and semantics. */ -static inline void rtl8139_rx_interrupt (struct net_device *dev, - struct rtl8139_private *tp, - void *ioaddr) +static void rtl8139_rx_interrupt (struct net_device *dev, + struct rtl8139_private *tp, + void *ioaddr) { unsigned char *rx_ring; u16 cur_rx; @@ -1440,6 +1568,9 @@ static inline void rtl8139_rx_interrupt (struct net_device *dev, if (rx_status & (RxBadSymbol | RxRunt | RxTooLong | RxCRCErr | RxBadAlign)) { + u8 tmp8; + int tmp_work = 1000; + DPRINTK ("%s: Ethernet frame had errors," " status %8.8x.\n", dev->name, rx_status); @@ -1457,10 +1588,23 @@ static inline void rtl8139_rx_interrupt (struct net_device *dev, tp->stats.rx_crc_errors++; /* Reset the receiver, based on RealTek recommendation. (Bug?) */ tp->cur_rx = 0; - RTL_W8 (ChipCmd, CmdTxEnb); + + /* disable receive */ + tmp8 = RTL_R8 (ChipCmd) & ChipCmdClear; + RTL_W8_F (ChipCmd, tmp8 | CmdTxEnb); + /* A.C.: Reset the multicast list. */ rtl8139_set_rx_mode (dev); - RTL_W8 (ChipCmd, CmdRxEnb | CmdTxEnb); + + while (--tmp_work > 0) { + tmp8 = RTL_R8 (ChipCmd) & ChipCmdClear; + if ((tmp8 & CmdRxEnb) && (tmp8 & CmdTxEnb)) + break; + RTL_W8_F (ChipCmd, tmp8 | CmdRxEnb | CmdTxEnb); + } + + if (tmp_work <= 0) + printk (KERN_WARNING PFX "tx/rx enable wait too long\n"); } else { /* Malloc up new buffer, compatible with net-2e. */ /* Omit the four octet CRC from the length. */ @@ -1478,6 +1622,7 @@ static inline void rtl8139_rx_interrupt (struct net_device *dev, } skb->dev = dev; skb_reserve (skb, 2); /* 16 byte align the IP fields. */ + if (ring_offset + rx_size + 4 > RX_BUF_LEN) { int semi_count = RX_BUF_LEN - ring_offset - 4; @@ -1485,27 +1630,24 @@ static inline void rtl8139_rx_interrupt (struct net_device *dev, memcpy (skb_put (skb, semi_count), &rx_ring[ring_offset + 4], semi_count); - memcpy (skb_put - (skb, rx_size - semi_count), + memcpy (skb_put (skb, rx_size - semi_count), rx_ring, rx_size - semi_count); #ifdef RTL8139_DEBUG { int i; - printk (KERN_DEBUG - "%s: Frame wrap @%d", + printk (KERN_DEBUG "%s: Frame wrap @%d", dev->name, semi_count); for (i = 0; i < 16; i++) - printk (" %2.2x", - rx_ring[i]); - printk (".\n"); + printk (" %2.2x", rx_ring[i]); + printk ("\n"); memset (rx_ring, 0xcc, 16); } #endif /* RTL8139_DEBUG */ } else { eth_copy_and_sum (skb, - &rx_ring[ring_offset + - 4], rx_size, 0); + &rx_ring[ring_offset + 4], + rx_size, 0); skb_put (skb, rx_size); } skb->protocol = eth_type_trans (skb, dev); @@ -1526,10 +1668,10 @@ static inline void rtl8139_rx_interrupt (struct net_device *dev, } -static inline int rtl8139_weird_interrupt (struct net_device *dev, - struct rtl8139_private *tp, - void *ioaddr, - int status, int link_changed) +static int rtl8139_weird_interrupt (struct net_device *dev, + struct rtl8139_private *tp, + void *ioaddr, + int status, int link_changed) { DPRINTK ("%s: Abnormal interrupt, status %8.8x.\n", dev->name, status); @@ -1552,7 +1694,6 @@ static inline int rtl8139_weird_interrupt (struct net_device *dev, tp->full_duplex = duplex; RTL_W8 (Cfg9346, Cfg9346_Unlock); RTL_W8 (Config1, tp->full_duplex ? 0x60 : 0x20); - RTL_W8 (Cfg9346, Cfg9346_Lock); } status &= ~RxUnderrun; } @@ -1594,9 +1735,6 @@ static void rtl8139_interrupt (int irq, void *dev_instance, spin_lock (&tp->lock); - /* disable interrupt generation while handling this interrupt */ - RTL_W16 (IntrMask, 0x0000); - do { status = RTL_R16 (IntrStatus); @@ -1628,7 +1766,7 @@ static void rtl8139_interrupt (int irq, void *dev_instance, CPU speed, lower CPU speed --> more errors). After clearing the RxOverflow bit the transfer of the packet was repeated and all data are error free transfered */ - RTL_W16 (IntrStatus, (status & RxFIFOOver) ? (status | RxOverflow) : status); + RTL_W16_F (IntrStatus, (status & RxFIFOOver) ? (status | RxOverflow) : status); DPRINTK ("%s: interrupt status=%#4.4x new intstat=%#4.4x.\n", dev->name, status, @@ -1664,14 +1802,10 @@ static void rtl8139_interrupt (int irq, void *dev_instance, RTL_W16 (IntrStatus, 0xffff); } - /* Enable all known interrupts by setting the interrupt mask. */ - RTL_W16 (IntrMask, rtl8139_intr_mask); - spin_unlock (&tp->lock); DPRINTK ("%s: exiting interrupt, intr_status=%#4.4x.\n", dev->name, RTL_R16 (IntrStatus)); - } @@ -1695,7 +1829,7 @@ static int rtl8139_close (struct net_device *dev) RTL_W16 (IntrMask, 0x0000); /* Stop the chip's Tx and Rx DMA processes. */ - RTL_W8 (ChipCmd, 0x00); + RTL_W8 (ChipCmd, (RTL_R8 (ChipCmd) & ChipCmdClear)); /* Update the error counts. */ tp->stats.rx_missed_errors += RTL_R32 (RxMissed); @@ -1724,9 +1858,9 @@ static int rtl8139_close (struct net_device *dev) tp->tx_info[i].mapping = 0; } - pci_free_consistent(tp->pci_dev, RX_BUF_LEN + 16, + pci_free_consistent(tp->pci_dev, RX_BUF_TOT_LEN, tp->rx_ring, tp->rx_ring_dma); - pci_free_consistent(tp->pci_dev, TX_BUF_SIZE * NUM_TX_DESC, + pci_free_consistent(tp->pci_dev, TX_BUF_TOT_LEN, tp->tx_bufs, tp->tx_bufs_dma); tp->rx_ring = NULL; tp->tx_bufs = NULL; @@ -1838,6 +1972,7 @@ static void rtl8139_set_rx_mode (struct net_device *dev) void *ioaddr = tp->mmio_addr; u32 mc_filter[2]; /* Multicast hash filter */ int i, rx_mode; + u32 tmp; unsigned long flags=0; DPRINTK ("ENTER\n"); @@ -1863,13 +1998,10 @@ static void rtl8139_set_rx_mode (struct net_device *dev) struct dev_mc_list *mclist; rx_mode = AcceptBroadcast | AcceptMulticast | AcceptMyPhys; mc_filter[1] = mc_filter[0] = 0; - for (i = 0, mclist = dev->mc_list; - mclist && i < dev->mc_count; - i++, mclist = - mclist->next) set_bit (ether_crc (ETH_ALEN, - mclist-> - dmi_addr) >> 26, - mc_filter); + for (i = 0, mclist = dev->mc_list; mclist && i < dev->mc_count; + i++, mclist = mclist->next) + set_bit (ether_crc (ETH_ALEN, mclist->dmi_addr) >> 26, + mc_filter); } /* if called from irq handler, lock already acquired */ @@ -1877,7 +2009,9 @@ static void rtl8139_set_rx_mode (struct net_device *dev) spin_lock_irqsave (&tp->lock, flags); /* We can safely update without stopping the chip. */ - RTL_W32 (RxConfig, rtl8139_rx_config | rx_mode); + tmp = rtl8139_rx_config | rx_mode | + (RTL_R32 (RxConfig) & rtl_chip_info[tp->chipset].RxConfigMask); + RTL_W32_F (RxConfig, tmp); RTL_W32_F (MAR0 + 0, mc_filter[0]); RTL_W32_F (MAR0 + 4, mc_filter[1]); @@ -1901,7 +2035,7 @@ static void rtl8139_suspend (struct pci_dev *pdev) /* Disable interrupts, stop Tx and Rx. */ RTL_W16 (IntrMask, 0x0000); - RTL_W8 (ChipCmd, 0x00); + RTL_W8 (ChipCmd, (RTL_R8 (ChipCmd) & ChipCmdClear)); /* Update the error counts. */ tp->stats.rx_missed_errors += RTL_R32 (RxMissed); |