Merge with Linux 2.3.99-pre4.

1 files changed, 209 insertions, 0 deletions

diff --git a/drivers/usb/serial/visor.c b/drivers/usb/serial/visor.c
new file mode 100644
index 000000000..6832814da
--- /dev/null
+++ b/drivers/usb/serial/visor.c
@@ -0,0 +1,209 @@
+/*
+ * USB HandSpring Visor driver
+ *
+ *	(C) Copyright (C) 1999, 2000
+ *	    Greg Kroah-Hartman (greg@kroah.com)
+ *
+ *	This program is free software; you can redistribute it and/or modify
+ *	it under the terms of the GNU General Public License as published by
+ *	the Free Software Foundation; either version 2 of the License, or
+ *	(at your option) any later version.
+ *
+ * See Documentation/usb/usb-serial.txt for more information on using this driver
+ * 
+ * (03/26/2000) gkh
+ *	Split driver up into device specific pieces.
+ * 
+ */
+
+#include <linux/config.h>
+
+#ifdef CONFIG_USB_SERIAL_VISOR
+
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/signal.h>
+#include <linux/errno.h>
+#include <linux/poll.h>
+#include <linux/init.h>
+#include <linux/malloc.h>
+#include <linux/fcntl.h>
+#include <linux/tty_driver.h>
+#include <linux/tty_flip.h>
+#include <linux/tty.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+
+#ifdef CONFIG_USB_SERIAL_DEBUG
+	#define DEBUG
+#else
+	#undef DEBUG
+#endif
+#include <linux/usb.h>
+
+#include "usb-serial.h"
+
+#include "visor.h"
+
+
+/* function prototypes for a handspring visor */
+static int  visor_open		(struct usb_serial_port *port, struct file *filp);
+static void visor_close		(struct usb_serial_port *port, struct file *filp);
+static void visor_throttle	(struct usb_serial_port *port);
+static void visor_unthrottle	(struct usb_serial_port *port);
+static int  visor_startup	(struct usb_serial *serial);
+
+/* All of the device info needed for the Handspring Visor */
+static __u16	handspring_vendor_id	= HANDSPRING_VENDOR_ID;
+static __u16	handspring_product_id	= HANDSPRING_VISOR_ID;
+struct usb_serial_device_type handspring_device = {
+	name:			"Handspring Visor",
+	idVendor:		&handspring_vendor_id,	/* the Handspring vendor ID */
+	idProduct:		&handspring_product_id,	/* the Handspring Visor product id */
+	needs_interrupt_in:	MUST_HAVE_NOT,		/* this device must not have an interrupt in endpoint */
+	needs_bulk_in:		MUST_HAVE,		/* this device must have a bulk in endpoint */
+	needs_bulk_out:		MUST_HAVE,		/* this device must have a bulk out endpoint */
+	num_interrupt_in:	0,
+	num_bulk_in:		2,
+	num_bulk_out:		2,
+	num_ports:		2,
+	open:			visor_open,
+	close:			visor_close,
+	throttle:		visor_throttle,
+	unthrottle:		visor_unthrottle,
+	startup:		visor_startup,
+};
+
+
+/******************************************************************************
+ * Handspring Visor specific driver functions
+ ******************************************************************************/
+static int visor_open (struct usb_serial_port *port, struct file *filp)
+{
+	dbg("visor_open port %d", port->number);
+
+	if (port->active) {
+		dbg ("device already open");
+		return -EINVAL;
+	}
+
+	port->active = 1;
+
+	/*Start reading from the device*/
+	if (usb_submit_urb(port->read_urb))
+		dbg("usb_submit_urb(read bulk) failed");
+
+	return (0);
+}
+
+
+static void visor_close (struct usb_serial_port *port, struct file * filp)
+{
+	struct usb_serial *serial = port->serial;
+	unsigned char *transfer_buffer =  kmalloc (0x12, GFP_KERNEL);
+	
+	dbg("visor_close port %d", port->number);
+			 
+	if (!transfer_buffer) {
+		err("visor_close: kmalloc(%d) failed.", 0x12);
+	} else {
+		/* send a shutdown message to the device */
+		usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_CLOSE_NOTIFICATION,
+				0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300);
+	}
+
+	/* shutdown our bulk reads and writes */
+	usb_unlink_urb (port->write_urb);
+	usb_unlink_urb (port->read_urb);
+	port->active = 0;
+}
+
+
+static void visor_throttle (struct usb_serial_port *port)
+{
+	dbg("visor_throttle port %d", port->number);
+
+	usb_unlink_urb (port->read_urb);
+
+	return;
+}
+
+
+static void visor_unthrottle (struct usb_serial_port *port)
+{
+	dbg("visor_unthrottle port %d", port->number);
+
+	if (usb_unlink_urb (port->read_urb))
+		dbg("usb_submit_urb(read bulk) failed");
+
+	return;
+}
+
+
+static int  visor_startup (struct usb_serial *serial)
+{
+	int response;
+	int i;
+	unsigned char *transfer_buffer =  kmalloc (256, GFP_KERNEL);
+
+	if (!transfer_buffer) {
+		err("visor_startup: kmalloc(%d) failed.", 256);
+		return -ENOMEM;
+	}
+
+	dbg("visor_startup");
+
+	dbg("visor_setup: Set config to 1");
+	usb_set_configuration (serial->dev, 1);
+
+	/* send a get connection info request */
+	response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_GET_CONNECTION_INFORMATION,
+					0xc2, 0x0000, 0x0000, transfer_buffer, 0x12, 300);
+	if (response < 0) {
+		err("visor_startup: error getting connection information");
+	} else {
+		struct visor_connection_info *connection_info = (struct visor_connection_info *)transfer_buffer;
+		char *string;
+		info("%s: Number of ports: %d", serial->type->name, connection_info->num_ports);
+		for (i = 0; i < connection_info->num_ports; ++i) {
+			switch (connection_info->connections[i].port_function_id) {
+				case VISOR_FUNCTION_GENERIC:
+					string = "Generic";
+					break;
+				case VISOR_FUNCTION_DEBUGGER:
+					string = "Debugger";
+					break;
+				case VISOR_FUNCTION_HOTSYNC:
+					string = "HotSync";
+					break;
+				case VISOR_FUNCTION_CONSOLE:
+					string = "Console";
+					break;
+				case VISOR_FUNCTION_REMOTE_FILE_SYS:
+					string = "Remote File System";
+					break;
+				default:
+					string = "unknown";
+					break;	
+			}
+			info("%s: port %d, is for %s use and is bound to ttyUSB%d", serial->type->name, connection_info->connections[i].port, string, serial->minor + i);
+		}
+	}
+
+	/* ask for the number of bytes available, but ignore the response as it is broken */
+	response = usb_control_msg (serial->dev, usb_rcvctrlpipe(serial->dev, 0), VISOR_REQUEST_BYTES_AVAILABLE,
+					0xc2, 0x0000, 0x0005, transfer_buffer, 0x02, 300);
+	if (response < 0) {
+		err("visor_startup: error getting bytes available request");
+	}
+
+	kfree (transfer_buffer);
+
+	/* continue on with initialization */
+	return (0);
+}
+
+
+#endif	/* CONFIG_USB_SERIAL_VISOR*/
+
+