summaryrefslogtreecommitdiffstats
path: root/Documentation/isdn/README.teles
diff options
context:
space:
mode:
Diffstat (limited to 'Documentation/isdn/README.teles')
-rw-r--r--Documentation/isdn/README.teles73
1 files changed, 73 insertions, 0 deletions
diff --git a/Documentation/isdn/README.teles b/Documentation/isdn/README.teles
new file mode 100644
index 000000000..904a55925
--- /dev/null
+++ b/Documentation/isdn/README.teles
@@ -0,0 +1,73 @@
+This is my Linux hardware level driver for Teles compatible ISDN cards. It is
+meant to be used with isdn4isdn4linux, an ISDN Link-level module for Linux written
+by Fritz Elfert.
+
+Isdn4linux can be obtained from ftp.franken.de:/pub/isdn4linux. The most recent
+Teles driver can be found on my homepage, http://www.xs4all.nl:/~jdo.
+
+Warning
+-------
+Teles4isdn4linux is a work in progress and may crash your machine. It has not
+been certified and therefore operation on your PTT's ISDN network is probably
+illegal.
+
+Limitations
+-----------
+Teles4isdn4linux only works on Euro ISDN lines and german 1TR6-lines.
+
+For the B channel transparent (HDLC) protocol and X.75 have been implemented.
+
+Running
+-------
+When you insmod isdn.o and teles.o (or with the kernel-version, during boottime)
+a few lines should appear in your syslog. Look for something like:
+
+Oct 11 16:53:30 jedi kernel: channels 2
+Oct 11 16:53:31 jedi kernel: Teles module installed
+
+Remember, that according to the new strategy for accessing Low-level-drivers
+from within isdn4linux you should also define a driver-id while doing
+insmod: Simply append teles_id=<SomeString> to the insmod-commandline. This
+string MUST NOT start with a digit or a small 'x'!
+
+At this point you can run a 'cat /dev/isdnctrl0' and view debugging
+messages. Debugging messages are enabled with the telesctrl tool:
+
+ teles/telesctrl <DriverId> 1 <debugging_flags>
+
+where <debugging_flags> is the integer sum of the following debugging
+options you wish enabled:
+
+ 1 Link-level <--> Hardware-level communication
+ 2 Top state machine
+ 4 D channel Q.931 (call control messages)
+ 8 D channel Q.921
+ 16 B channel X.75
+ 32 Lowlevel (irq and Layer1 stuff)
+
+For example 'teles/telesctrl MyTeles 1 63' enables full
+debugging.
+
+Questions
+---------
+Check out the FAQ (ftp.franken.de).
+
+Bugs
+----
+If you find any please let me know.
+
+Thanks
+------
+Special thanks to:
+
+ Erik Bos,Beat Doebeli,Fritz Elfert,
+ Pauline Middelink,Paula de Nie,
+ Bernd Oerding,Stephan Seidl,Matthias Urlichs,
+ Rogier Wolff
+
+
+
+Enjoy,
+
+Jan den Ouden denouden@groovin.xs4all.nl
+