diff options
Diffstat (limited to 'Documentation/m68k/README.buddha')
| -rw-r--r-- | Documentation/m68k/README.buddha | 6 |
1 files changed, 3 insertions, 3 deletions
diff --git a/Documentation/m68k/README.buddha b/Documentation/m68k/README.buddha index d3b7bc73f..bf802ffc9 100644 --- a/Documentation/m68k/README.buddha +++ b/Documentation/m68k/README.buddha @@ -21,7 +21,7 @@ Rom-vector: $1000 The card should be a Z-II board, size 64K, not for freemem list, Rom-Vektor is valid, no second Autoconfig-board on the -same card, no space preferrence, supports "Shutup_forever". +same card, no space preference, supports "Shutup_forever". Setting the base address should be done in two steps, just as the Amiga Kickstart does: The lower nibble of the 8-Bit @@ -29,7 +29,7 @@ address is written to $4a, then the whole Byte is written to $48, while it doesn't matter how often you're writing to $4a as long as $48 is not touched. After $48 has been written, the whole card disappears from $e8 and is mapped to the new -addrress just written. Make shure $4a is written befor $48, +address just written. Make shure $4a is written before $48, otherwise your chance is only 1:16 to find the board :-). The local memory-map is even active when mapped to $e8: @@ -100,7 +100,7 @@ IRQ-lines of the IDE-ports by reading from the three (two for Buddha-only) registers $f00, $f40 and $f80. This way more than one I/O request can be handled and you can easily determine what driver has to serve the INT2. Buddha and -Catweasel expansion boards can issue an INT6. A seperate +Catweasel expansion boards can issue an INT6. A separate memory map is available for the I/O module and the sysop's I/O module. |