diff options
Diffstat (limited to 'arch/m68k/amiga/retz3fb.c')
-rw-r--r-- | arch/m68k/amiga/retz3fb.c | 1754 |
1 files changed, 2 insertions, 1752 deletions
diff --git a/arch/m68k/amiga/retz3fb.c b/arch/m68k/amiga/retz3fb.c index 4885e48f7..49a0853bc 100644 --- a/arch/m68k/amiga/retz3fb.c +++ b/arch/m68k/amiga/retz3fb.c @@ -30,1762 +30,12 @@ #include <linux/malloc.h> #include <linux/delay.h> #include <linux/fb.h> -#include <asm/uaccess.h> -#include <asm/system.h> -#include <asm/irq.h> #include <linux/zorro.h> -#include <asm/pgtable.h> - -#include "retz3fb.h" - -/* #define DEBUG if(1) */ -#define DEBUG if(0) - -/* - * Reserve space for one pattern line. - * - * For the time being we only support 4MB boards! - */ - -#define PAT_MEM_SIZE 16*3 -#define PAT_MEM_OFF (4*1024*1024 - PAT_MEM_SIZE) - -#define arraysize(x) (sizeof(x)/sizeof(*(x))) - -struct retz3_fb_par { - int xres; - int yres; - int xres_vir; - int yres_vir; - int xoffset; - int yoffset; - int bpp; - - struct fb_bitfield red; - struct fb_bitfield green; - struct fb_bitfield blue; - struct fb_bitfield transp; - - int pixclock; - int left_margin; /* time from sync to picture */ - int right_margin; /* time from picture to sync */ - int upper_margin; /* time from sync to picture */ - int lower_margin; - int hsync_len; /* length of horizontal sync */ - int vsync_len; /* length of vertical sync */ - int vmode; -}; - -struct display_data { - long h_total; /* Horizontal Total */ - long h_sstart; /* Horizontal Sync Start */ - long h_sstop; /* Horizontal Sync Stop */ - long h_bstart; /* Horizontal Blank Start */ - long h_bstop; /* Horizontal Blank Stop */ - long h_dispend; /* Horizontal Display End */ - long v_total; /* Vertical Total */ - long v_sstart; /* Vertical Sync Start */ - long v_sstop; /* Vertical Sync Stop */ - long v_bstart; /* Vertical Blank Start */ - long v_bstop; /* Vertical Blank Stop */ - long v_dispend; /* Horizontal Display End */ -}; - -static struct retz3_fb_par current_par; - -static int current_par_valid = 0; -static int currcon = 0; - -static struct display disp[MAX_NR_CONSOLES]; -static struct fb_info fb_info; - -static int node; /* node of the /dev/fb?current file */ - - -/* - * Switch for Chipset Independency - */ - -static struct fb_hwswitch { - - /* Initialisation */ - - int (*init)(void); - - /* Display Control */ - - int (*encode_fix)(struct fb_fix_screeninfo *fix, struct retz3_fb_par *par); - int (*decode_var)(struct fb_var_screeninfo *var, struct retz3_fb_par *par); - int (*encode_var)(struct fb_var_screeninfo *var, struct retz3_fb_par *par); - int (*getcolreg)(unsigned int regno, unsigned int *red, unsigned - int *green, unsigned int *blue, unsigned int *transp); - int (*setcolreg)(unsigned int regno, unsigned int red, unsigned int - green, unsigned int blue, unsigned int transp); - void (*blank)(int blank); -} *fbhw; - - -/* - * Frame Buffer Name - */ - -static char retz3_fb_name[16] = "RetinaZ3"; - - -static int z3_key = 0; -static unsigned char retz3_color_table [256][4]; -static unsigned long z3_mem; -static unsigned long z3_fbmem; -static unsigned long z3_size; -static volatile unsigned char *z3_regs; - -static long *memstart; - - -/* - * Predefined Video Mode Names - */ - -static char *retz3_fb_modenames[] = { - - /* - * Autodetect (Default) Video Mode - */ - - "default", - - /* - * Predefined Video Modes - */ - - "640x480", /* RetinaZ3 8 bpp */ - "800x600", /* RetinaZ3 8 bpp */ - "1024x768i", - "640x480-16", /* RetinaZ3 16 bpp */ - "640x480-24", /* RetinaZ3 24 bpp */ - - /* - * Dummy Video Modes - */ - - "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", - "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", - "dummy", "dummy", "dummy", "dummy", "dummy", "dummy", - - /* - * User Defined Video Modes - * - * This doesn't work yet!! - */ - - "user0", "user1", "user2", "user3", - "user4", "user5", "user6", "user7" -}; - -/* - * A small info on how to convert XFree86 timing values into fb - * timings - by Frank Neumann: - * -An XFree86 mode line consists of the following fields: - "800x600" 50 800 856 976 1040 600 637 643 666 - < name > DCF HR SH1 SH2 HFL VR SV1 SV2 VFL - -The fields in the fb_var_screeninfo structure are: - unsigned long pixclock; * pixel clock in ps (pico seconds) * - unsigned long left_margin; * time from sync to picture * - unsigned long right_margin; * time from picture to sync * - unsigned long upper_margin; * time from sync to picture * - unsigned long lower_margin; - unsigned long hsync_len; * length of horizontal sync * - unsigned long vsync_len; * length of vertical sync * - -1) Pixelclock: - xfree: in MHz - fb: In Picoseconds (ps) - - pixclock = 1000000 / DCF - -2) horizontal timings: - left_margin = HFL - SH2 - right_margin = SH1 - HR - hsync_len = SH2 - SH1 - -3) vertical timings: - upper_margin = VFL - SV2 - lower_margin = SV1 - VR - vsync_len = SV2 - SV1 - -Good examples for VESA timings can be found in the XFree86 source tree, -under "programs/Xserver/hw/xfree86/doc/modeDB.txt". -*/ - -/* - * Predefined Video Mode Definitions - */ - -static struct fb_var_screeninfo retz3_fb_predefined[] = { - - /* - * Autodetect (Default) Video Mode - */ - - { 0, }, - - /* - * Predefined Video Modes - */ - - /* - * NB: it is very important to adjust the pixel-clock to the color-depth. - */ - - { - 640, 480, 640, 480, 0, 0, 8, 0, - {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, - 0, 0, -1, -1, FB_ACCEL_RETINAZ3, 38461, 28, 32, 12, 10, 96, 2, - FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED - }, - /* - ModeLine "800x600" 36 800 824 896 1024 600 601 603 625 - < name > DCF HR SH1 SH2 HFL VR SV1 SV2 VFL - */ - { - /* 800 x 600, 8 bpp */ - 800, 600, 800, 600, 0, 0, 8, 0, - {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, - 0, 0, -1, -1, FB_ACCEL_RETINAZ3, 27778, 64, 24, 22, 1, 120, 2, - FB_SYNC_COMP_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED - }, - /* - ModeLine "1024x768i" 45 1024 1064 1224 1264 768 777 785 817 interlace - < name > DCF HR SH1 SH2 HFL VR SV1 SV2 VFL - */ - { - /* 1024 x 768, 8 bpp, interlaced */ - 1024, 768, 1024, 768, 0, 0, 8, 0, - {0, 8, 0}, {0, 8, 0}, {0, 8, 0}, {0, 0, 0}, - 0, 0, -1, -1, FB_ACCEL_RETINAZ3, 22222, 40, 40, 32, 9, 160, 8, - FB_SYNC_COMP_HIGH_ACT|FB_SYNC_VERT_HIGH_ACT, FB_VMODE_INTERLACED - }, - { - 640, 480, 640, 480, 0, 0, 16, 0, - {11, 5, 0}, {5, 6, 0}, {0, 5, 0}, {0, 0, 0}, - 0, 0, -1, -1, FB_ACCEL_RETINAZ3, 38461/2, 28, 32, 12, 10, 96, 2, - FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED - }, - { - 640, 480, 640, 480, 0, 0, 24, 0, - {8, 8, 8}, {8, 8, 8}, {8, 8, 8}, {0, 0, 0}, - 0, 0, -1, -1, FB_ACCEL_RETINAZ3, 38461/3, 28, 32, 12, 10, 96, 2, - FB_SYNC_HOR_HIGH_ACT | FB_SYNC_VERT_HIGH_ACT, FB_VMODE_NONINTERLACED - }, - - /* - * Dummy Video Modes - */ - - { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, - { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, - { 0, }, { 0, }, - - /* - * User Defined Video Modes - */ - - { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, }, { 0, } -}; - - -#define NUM_TOTAL_MODES arraysize(retz3_fb_predefined) -#define NUM_PREDEF_MODES (5) - - -static int z3fb_inverse = 0; -static int z3fb_mode = 0; - - -/* - * Interface used by the world - */ - -int retz3_probe(void); -void retz3_video_setup(char *options, int *ints); - -static int retz3_fb_get_fix(struct fb_fix_screeninfo *fix, int con); -static int retz3_fb_get_var(struct fb_var_screeninfo *var, int con); -static int retz3_fb_set_var(struct fb_var_screeninfo *var, int con); -static int retz3_fb_get_cmap(struct fb_cmap *cmap, int kspc, int con); -static int retz3_fb_set_cmap(struct fb_cmap *cmap, int kspc, int con); -static int retz3_fb_pan_display(struct fb_var_screeninfo *var, int con); -static int retz3_fb_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg, int con); - - -/* - * Interface to the low level console driver - */ - -struct fb_info *retz3_fb_init(long *mem_start); /* Through amiga_fb_init() */ -static int z3fb_switch(int con); -static int z3fb_updatevar(int con); -static void z3fb_blank(int blank); -static int z3fb_setcmap(struct fb_cmap *cmap, int con); - - -/* - * Accelerated Functions used by the low level console driver - */ - -void retz3_bitblt(struct fb_var_screeninfo *scr, - unsigned short curx, unsigned short cury, unsigned - short destx, unsigned short desty, unsigned short - width, unsigned short height, unsigned short cmd, - unsigned short mask); -void retz3_fill(unsigned short x, unsigned short y, unsigned short - width, unsigned short height, unsigned short mode, - unsigned short color); - -/* - * Hardware Specific Routines - */ - -static int retz3_init(void); -static int retz3_encode_fix(struct fb_fix_screeninfo *fix, - struct retz3_fb_par *par); -static int retz3_decode_var(struct fb_var_screeninfo *var, - struct retz3_fb_par *par); -static int retz3_encode_var(struct fb_var_screeninfo *var, - struct retz3_fb_par *par); -static int retz3_getcolreg(unsigned int regno, unsigned int *red, - unsigned int *green, unsigned int *blue, - unsigned int *transp); -static int retz3_setcolreg(unsigned int regno, unsigned int red, - unsigned int green, unsigned int blue, - unsigned int transp); -static void retz3_blank(int blank); - - -/* - * Internal routines - */ - -static void retz3_fb_get_par(struct retz3_fb_par *par); -static void retz3_fb_set_par(struct retz3_fb_par *par); -static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive); -static struct fb_cmap *get_default_colormap(int bpp); -static int do_fb_get_cmap(struct fb_cmap *cmap, struct fb_var_screeninfo *var, - int kspc); -static int do_fb_set_cmap(struct fb_cmap *cmap, struct fb_var_screeninfo *var, - int kspc); -static void do_install_cmap(int con); -static void memcpy_fs(int fsfromto, void *to, void *from, int len); -static void copy_cmap(struct fb_cmap *from, struct fb_cmap *to, int fsfromto); -static int alloc_cmap(struct fb_cmap *cmap, int len, int transp); -static void retz3_fb_set_disp(int con); -static int get_video_mode(const char *name); - - -/* -------------------- Hardware specific routines -------------------------- */ - -static unsigned short find_fq(unsigned int freq) -{ - unsigned long f; - long tmp; - long prev = 0x7fffffff; - long n2, n1 = 3; - unsigned long m; - unsigned short res = 0; - - if (freq <= 31250000) - n2 = 3; - else if (freq <= 62500000) - n2 = 2; - else if (freq <= 125000000) - n2 = 1; - else if (freq <= 250000000) - n2 = 0; - else - return(0); - - - do { - f = freq >> (10 - n2); - - m = (f * n1) / (14318180/1024); - - if (m > 129) - break; - - tmp = (((m * 14318180) >> n2) / n1) - freq; - if (tmp < 0) - tmp = -tmp; - - if (tmp < prev) { - prev = tmp; - res = (((n2 << 5) | (n1-2)) << 8) | (m-2); - } - - } while ( (++n1) <= 21); - - return res; -} - - -static int retz3_set_video(struct fb_var_screeninfo *var, - struct retz3_fb_par *par) -{ - float freq_f; - long freq; - - int xres, hfront, hsync, hback; - int yres, vfront, vsync, vback; - unsigned char tmp; - unsigned short best_freq; - struct display_data data; - - short clocksel = 0; /* Apparantly this is always zero */ - - int bpp = var->bits_per_pixel; - - /* - * XXX - */ - if (bpp == 24) - return 0; - - if ((bpp != 8) && (bpp != 16) && (bpp != 24)) - return -EFAULT; - - par->xoffset = 0; - par->yoffset = 0; - - xres = var->xres * bpp / 4; - hfront = var->right_margin * bpp / 4; - hsync = var->hsync_len * bpp / 4; - hback = var->left_margin * bpp / 4; - - if (var->vmode & FB_VMODE_DOUBLE) - { - yres = var->yres * 2; - vfront = var->lower_margin * 2; - vsync = var->vsync_len * 2; - vback = var->upper_margin * 2; - } - else if (var->vmode & FB_VMODE_INTERLACED) - { - yres = (var->yres + 1) / 2; - vfront = (var->lower_margin + 1) / 2; - vsync = (var->vsync_len + 1) / 2; - vback = (var->upper_margin + 1) / 2; - } - else - { - yres = var->yres; /* -1 ? */ - vfront = var->lower_margin; - vsync = var->vsync_len; - vback = var->upper_margin; - } - - data.h_total = (hback / 8) + (xres / 8) - + (hfront / 8) + (hsync / 8) - 1 /* + 1 */; - data.h_dispend = ((xres + bpp - 1)/ 8) - 1; - data.h_bstart = xres / 8 /* + 1 */; - - data.h_bstop = data.h_total+1 + 2 + 1; - data.h_sstart = (xres / 8) + (hfront / 8) + 1; - data.h_sstop = (xres / 8) + (hfront / 8) + (hsync / 8) + 1; - - data.v_total = yres + vfront + vsync + vback - 1; - - data.v_dispend = yres - 1; - data.v_bstart = yres; - - data.v_bstop = data.v_total; - data.v_sstart = yres + vfront - 1 - 2; - data.v_sstop = yres + vfront + vsync - 1; - -#if 0 /* testing */ - - printk("HBS: %i\n", data.h_bstart); - printk("HSS: %i\n", data.h_sstart); - printk("HSE: %i\n", data.h_sstop); - printk("HBE: %i\n", data.h_bstop); - printk("HT: %i\n", data.h_total); - - printk("hsync: %i\n", hsync); - printk("hfront: %i\n", hfront); - printk("hback: %i\n", hback); - - printk("VBS: %i\n", data.v_bstart); - printk("VSS: %i\n", data.v_sstart); - printk("VSE: %i\n", data.v_sstop); - printk("VBE: %i\n", data.v_bstop); - printk("VT: %i\n", data.v_total); - - printk("vsync: %i\n", vsync); - printk("vfront: %i\n", vfront); - printk("vback: %i\n", vback); -#endif - - if (data.v_total >= 1024) - printk("MAYDAY: v_total >= 1024; bailing out!\n"); - - reg_w(GREG_MISC_OUTPUT_W, 0xe3 | ((clocksel & 3) * 0x04)); - reg_w(GREG_FEATURE_CONTROL_W, 0x00); - - seq_w(SEQ_RESET, 0x00); - seq_w(SEQ_RESET, 0x03); /* reset sequencer logic */ - - /* - * CLOCKING_MODE bits: - * 2: This one is only set for certain text-modes, wonder if - * it may be for EGA-lines? (it was referred to as CLKDIV2) - * (The CL drivers sets it to 0x21 with the comment: - * FullBandwidth (video off) and 8/9 dot clock) - */ - seq_w(SEQ_CLOCKING_MODE, 0x01 | 0x00 /* 0x08 */); - - seq_w(SEQ_MAP_MASK, 0x0f); /* enable writing to plane 0-3 */ - seq_w(SEQ_CHAR_MAP_SELECT, 0x00); /* doesn't matter in gfx-mode */ - seq_w(SEQ_MEMORY_MODE, 0x06); /* CL driver says 0x0e for 256 col mode*/ - seq_w(SEQ_RESET, 0x01); - seq_w(SEQ_RESET, 0x03); - - seq_w(SEQ_EXTENDED_ENABLE, 0x05); - - seq_w(SEQ_CURSOR_CONTROL, 0x00); /* disable cursor */ - seq_w(SEQ_PRIM_HOST_OFF_HI, 0x00); - seq_w(SEQ_PRIM_HOST_OFF_HI, 0x00); - seq_w(SEQ_LINEAR_0, 0x4a); - seq_w(SEQ_LINEAR_1, 0x00); - - seq_w(SEQ_SEC_HOST_OFF_HI, 0x00); - seq_w(SEQ_SEC_HOST_OFF_LO, 0x00); - seq_w(SEQ_EXTENDED_MEM_ENA, 0x3 | 0x4 | 0x10 | 0x40); - - /* - * The lower 4 bits (0-3) are used to set the font-width for - * text-mode - DON'T try to set this for gfx-mode. - */ - seq_w(SEQ_EXT_CLOCK_MODE, 0x10); - seq_w(SEQ_EXT_VIDEO_ADDR, 0x03); - - /* - * Extended Pixel Control: - * bit 0: text-mode=0, gfx-mode=1 (Graphics Byte ?) - * bit 1: (Packed/Nibble Pixel Format ?) - * bit 4-5: depth, 0=1-8bpp, 1=9-16bpp, 2=17-24bpp - */ - seq_w(SEQ_EXT_PIXEL_CNTL, 0x01 | (((bpp / 8) - 1) << 4)); - - seq_w(SEQ_BUS_WIDTH_FEEDB, 0x04); - seq_w(SEQ_COLOR_EXP_WFG, 0x01); - seq_w(SEQ_COLOR_EXP_WBG, 0x00); - seq_w(SEQ_EXT_RW_CONTROL, 0x00); - seq_w(SEQ_MISC_FEATURE_SEL, (0x51 | (clocksel & 8))); - seq_w(SEQ_COLOR_KEY_CNTL, 0x40); - seq_w(SEQ_COLOR_KEY_MATCH0, 0x00); - seq_w(SEQ_COLOR_KEY_MATCH1, 0x00); - seq_w(SEQ_COLOR_KEY_MATCH2, 0x00); - seq_w(SEQ_CRC_CONTROL, 0x00); - seq_w(SEQ_PERF_SELECT, 0x10); - seq_w(SEQ_ACM_APERTURE_1, 0x00); - seq_w(SEQ_ACM_APERTURE_2, 0x30); - seq_w(SEQ_ACM_APERTURE_3, 0x00); - seq_w(SEQ_MEMORY_MAP_CNTL, 0x03); - - - /* unlock register CRT0..CRT7 */ - crt_w(CRT_END_VER_RETR, (data.v_sstop & 0x0f) | 0x20); - - /* Zuerst zu schreibende Werte nur per printk ausgeben */ - DEBUG printk("CRT_HOR_TOTAL: %ld\n", data.h_total); - crt_w(CRT_HOR_TOTAL, data.h_total & 0xff); - - DEBUG printk("CRT_HOR_DISP_ENA_END: %ld\n", data.h_dispend); - crt_w(CRT_HOR_DISP_ENA_END, (data.h_dispend) & 0xff); - - DEBUG printk("CRT_START_HOR_BLANK: %ld\n", data.h_bstart); - crt_w(CRT_START_HOR_BLANK, data.h_bstart & 0xff); - - DEBUG printk("CRT_END_HOR_BLANK: 128+%ld\n", data.h_bstop % 32); - crt_w(CRT_END_HOR_BLANK, 0x80 | (data.h_bstop & 0x1f)); - - DEBUG printk("CRT_START_HOR_RETR: %ld\n", data.h_sstart); - crt_w(CRT_START_HOR_RETR, data.h_sstart & 0xff); - - tmp = (data.h_sstop & 0x1f); - if (data.h_bstop & 0x20) - tmp |= 0x80; - DEBUG printk("CRT_END_HOR_RETR: %d\n", tmp); - crt_w(CRT_END_HOR_RETR, tmp); - - DEBUG printk("CRT_VER_TOTAL: %ld\n", data.v_total & 0xff); - crt_w(CRT_VER_TOTAL, (data.v_total & 0xff)); - - tmp = 0x10; /* LineCompare bit #9 */ - if (data.v_total & 256) - tmp |= 0x01; - if (data.v_dispend & 256) - tmp |= 0x02; - if (data.v_sstart & 256) - tmp |= 0x04; - if (data.v_bstart & 256) - tmp |= 0x08; - if (data.v_total & 512) - tmp |= 0x20; - if (data.v_dispend & 512) - tmp |= 0x40; - if (data.v_sstart & 512) - tmp |= 0x80; - DEBUG printk("CRT_OVERFLOW: %d\n", tmp); - crt_w(CRT_OVERFLOW, tmp); - - crt_w(CRT_PRESET_ROW_SCAN, 0x00); /* not CL !!! */ - - tmp = 0x40; /* LineCompare bit #8 */ - if (data.v_bstart & 512) - tmp |= 0x20; - if (var->vmode & FB_VMODE_DOUBLE) - tmp |= 0x80; - DEBUG printk("CRT_MAX_SCAN_LINE: %d\n", tmp); - crt_w(CRT_MAX_SCAN_LINE, tmp); - - crt_w(CRT_CURSOR_START, 0x00); - crt_w(CRT_CURSOR_END, 8 & 0x1f); /* font height */ - - crt_w(CRT_START_ADDR_HIGH, 0x00); - crt_w(CRT_START_ADDR_LOW, 0x00); - - crt_w(CRT_CURSOR_LOC_HIGH, 0x00); - crt_w(CRT_CURSOR_LOC_LOW, 0x00); - - DEBUG printk("CRT_START_VER_RETR: %ld\n", data.v_sstart & 0xff); - crt_w(CRT_START_VER_RETR, (data.v_sstart & 0xff)); - -#if 1 - /* 5 refresh cycles per scanline */ - DEBUG printk("CRT_END_VER_RETR: 64+32+%ld\n", data.v_sstop % 16); - crt_w(CRT_END_VER_RETR, ((data.v_sstop & 0x0f) | 0x40 | 0x20)); -#else - DEBUG printk("CRT_END_VER_RETR: 128+32+%ld\n", data.v_sstop % 16); - crt_w(CRT_END_VER_RETR, ((data.v_sstop & 0x0f) | 128 | 32)); -#endif - DEBUG printk("CRT_VER_DISP_ENA_END: %ld\n", data.v_dispend & 0xff); - crt_w(CRT_VER_DISP_ENA_END, (data.v_dispend & 0xff)); - - DEBUG printk("CRT_START_VER_BLANK: %ld\n", data.v_bstart & 0xff); - crt_w(CRT_START_VER_BLANK, (data.v_bstart & 0xff)); - - DEBUG printk("CRT_END_VER_BLANK: %ld\n", data.v_bstop & 0xff); - crt_w(CRT_END_VER_BLANK, (data.v_bstop & 0xff)); - - DEBUG printk("CRT_MODE_CONTROL: 0xe3\n"); - crt_w(CRT_MODE_CONTROL, 0xe3); - - DEBUG printk("CRT_LINE_COMPARE: 0xff\n"); - crt_w(CRT_LINE_COMPARE, 0xff); - - tmp = (var->xres_virtual / 8) * (bpp / 8); - crt_w(CRT_OFFSET, tmp); - - crt_w(CRT_UNDERLINE_LOC, 0x07); /* probably font-height - 1 */ - - tmp = 0x20; /* Enable extended end bits */ - if (data.h_total & 0x100) - tmp |= 0x01; - if ((data.h_dispend) & 0x100) - tmp |= 0x02; - if (data.h_bstart & 0x100) - tmp |= 0x04; - if (data.h_sstart & 0x100) - tmp |= 0x08; - if (var->vmode & FB_VMODE_INTERLACED) - tmp |= 0x10; - DEBUG printk("CRT_EXT_HOR_TIMING1: %d\n", tmp); - crt_w(CRT_EXT_HOR_TIMING1, tmp); - - tmp = 0x00; - if (((var->xres_virtual / 8) * (bpp / 8)) & 0x100) - tmp |= 0x10; - crt_w(CRT_EXT_START_ADDR, tmp); - - tmp = 0x00; - if (data.h_total & 0x200) - tmp |= 0x01; - if ((data.h_dispend) & 0x200) - tmp |= 0x02; - if (data.h_bstart & 0x200) - tmp |= 0x04; - if (data.h_sstart & 0x200) - tmp |= 0x08; - tmp |= ((data.h_bstop & 0xc0) >> 2); - tmp |= ((data.h_sstop & 0x60) << 1); - crt_w(CRT_EXT_HOR_TIMING2, tmp); - DEBUG printk("CRT_EXT_HOR_TIMING2: %d\n", tmp); - - tmp = 0x10; /* Line compare bit 10 */ - if (data.v_total & 0x400) - tmp |= 0x01; - if ((data.v_dispend) & 0x400) - tmp |= 0x02; - if (data.v_bstart & 0x400) - tmp |= 0x04; - if (data.v_sstart & 0x400) - tmp |= 0x08; - tmp |= ((data.v_bstop & 0x300) >> 3); - if (data.v_sstop & 0x10) - tmp |= 0x80; - crt_w(CRT_EXT_VER_TIMING, tmp); - DEBUG printk("CRT_EXT_VER_TIMING: %d\n", tmp); - - crt_w(CRT_MONITOR_POWER, 0x00); - - /* - * Convert from ps to Hz. - */ - freq_f = (1.0/(float)var->pixclock) * 1000000000; - freq = ((long)freq_f) * 1000; - - best_freq = find_fq(freq); - pll_w(0x02, best_freq); - best_freq = find_fq(61000000); - pll_w(0x0a, best_freq); - pll_w(0x0e, 0x22); - - gfx_w(GFX_SET_RESET, 0x00); - gfx_w(GFX_ENABLE_SET_RESET, 0x00); - gfx_w(GFX_COLOR_COMPARE, 0x00); - gfx_w(GFX_DATA_ROTATE, 0x00); - gfx_w(GFX_READ_MAP_SELECT, 0x00); - gfx_w(GFX_GRAPHICS_MODE, 0x00); - gfx_w(GFX_MISC, 0x05); - gfx_w(GFX_COLOR_XCARE, 0x0f); - gfx_w(GFX_BITMASK, 0xff); - - reg_r(ACT_ADDRESS_RESET); - attr_w(ACT_PALETTE0 , 0x00); - attr_w(ACT_PALETTE1 , 0x01); - attr_w(ACT_PALETTE2 , 0x02); - attr_w(ACT_PALETTE3 , 0x03); - attr_w(ACT_PALETTE4 , 0x04); - attr_w(ACT_PALETTE5 , 0x05); - attr_w(ACT_PALETTE6 , 0x06); - attr_w(ACT_PALETTE7 , 0x07); - attr_w(ACT_PALETTE8 , 0x08); - attr_w(ACT_PALETTE9 , 0x09); - attr_w(ACT_PALETTE10, 0x0a); - attr_w(ACT_PALETTE11, 0x0b); - attr_w(ACT_PALETTE12, 0x0c); - attr_w(ACT_PALETTE13, 0x0d); - attr_w(ACT_PALETTE14, 0x0e); - attr_w(ACT_PALETTE15, 0x0f); - reg_r(ACT_ADDRESS_RESET); - - attr_w(ACT_ATTR_MODE_CNTL, 0x09); /* 0x01 for CL */ - - attr_w(ACT_OVERSCAN_COLOR, 0x00); - attr_w(ACT_COLOR_PLANE_ENA, 0x0f); - attr_w(ACT_HOR_PEL_PANNING, 0x00); - attr_w(ACT_COLOR_SELECT, 0x00); - - reg_r(ACT_ADDRESS_RESET); - reg_w(ACT_DATA, 0x20); - - reg_w(VDAC_MASK, 0xff); - - /* - * Extended palette adressing ??? - */ - switch (bpp){ - case 8: - reg_w(0x83c6, 0x00); - break; - case 16: - reg_w(0x83c6, 0x60); - break; - case 24: - reg_w(0x83c6, 0xe0); - break; - default: - printk("Illegal color-depth: %i\n", bpp); - } - - reg_w(VDAC_ADDRESS, 0x00); - - seq_w(SEQ_MAP_MASK, 0x0f ); - - return 0; -} - -/* - * Initialization - * - * Set the default video mode for this chipset. If a video mode was - * specified on the command line, it will override the default mode. - */ - -static int retz3_init(void) -{ - int i; -#if 0 - volatile unsigned long *CursorBase; -#endif - unsigned long board_addr, board_size; - struct ConfigDev *cd; - - cd = zorro_get_board (z3_key); - zorro_config_board (z3_key, 0); - board_addr = (unsigned long)cd->cd_BoardAddr; - board_size = (unsigned long)cd->cd_BoardSize; - - for (i = 0; i < 256; i++){ - for (i = 0; i < 256; i++){ - retz3_color_table [i][0] = i; - retz3_color_table [i][1] = i; - retz3_color_table [i][2] = i; - retz3_color_table [i][3] = 0; - } - } - - *memstart = (*memstart + PAGE_SIZE - 1) & ~(PAGE_SIZE - 1); - - z3_mem = kernel_map (board_addr, board_size, - KERNELMAP_NOCACHE_SER, memstart); - - z3_regs = (char*) z3_mem; - z3_fbmem = z3_mem + VIDEO_MEM_OFFSET; - - /* Get memory size - for now we asume its a 4MB board */ - - z3_size = 0x00400000; /* 4 MB */ - - memset ((char*)z3_fbmem, 0, z3_size); - - /* Disable hardware cursor */ - - seq_w(SEQ_CURSOR_Y_INDEX, 0x00); - - -#if 0 - /* Initialize hardware cursor */ - CursorBase = (unsigned long *)((char *)(z3_mem) + z3_size - 0x400); - for (i=0; i < 8; i++){ - *(CursorBase +(i*4)) = 0xffffff00; - *(CursorBase+1+(i*4)) = 0xffff0000; - *(CursorBase+2+(i*4)) = 0xffff0000; - *(CursorBase+3+(i*4)) = 0xffff0000; - } - for (i=8; i < 64; i++){ - *(CursorBase +(i*4)) = 0xffff0000; - *(CursorBase+1+(i*4)) = 0xffff0000; - *(CursorBase+2+(i*4)) = 0xffff0000; - *(CursorBase+3+(i*4)) = 0xffff0000; - } -#endif - - retz3_setcolreg (255, 56, 100, 160, 0); - retz3_setcolreg (254, 0, 0, 0, 0); - - return 0; -} - - -/* - * This function should fill in the `fix' structure based on the - * values in the `par' structure. - */ - -static int retz3_encode_fix(struct fb_fix_screeninfo *fix, - struct retz3_fb_par *par) -{ - int i; - - strcpy(fix->id, retz3_fb_name); - fix->smem_start = z3_fbmem; - fix->smem_len = z3_size; - - fix->type = FB_TYPE_PACKED_PIXELS; - fix->type_aux = 0; - if (par->bpp == 8) - fix->visual = FB_VISUAL_PSEUDOCOLOR; - else - fix->visual = FB_VISUAL_DIRECTCOLOR; - - fix->xpanstep = 0; - fix->ypanstep = 0; - fix->ywrapstep = 0; - fix->line_length = 0; - - for (i = 0; i < arraysize(fix->reserved); i++) - fix->reserved[i] = 0; - - return 0; -} - - -/* - * Get the video params out of `var'. If a value doesn't fit, round - * it up, if it's too big, return -EINVAL. - */ - -static int retz3_decode_var(struct fb_var_screeninfo *var, - struct retz3_fb_par *par) -{ - par->xres = var->xres; - par->yres = var->yres; - par->xres_vir = var->xres_virtual; - par->yres_vir = var->yres_virtual; - par->bpp = var->bits_per_pixel; - par->pixclock = var->pixclock; - par->vmode = var->vmode; - - par->red = var->red; - par->green = var->green; - par->blue = var->blue; - par->transp = var->transp; - - par->left_margin = var->left_margin; - par->right_margin = var->right_margin; - par->upper_margin = var->upper_margin; - par->lower_margin = var->lower_margin; - par->hsync_len = var->hsync_len; - par->vsync_len = var->vsync_len; - - return 0; -} - - -/* - * Fill the `var' structure based on the values in `par' and maybe - * other values read out of the hardware. - */ - -static int retz3_encode_var(struct fb_var_screeninfo *var, - struct retz3_fb_par *par) -{ - int i; - - var->xres = par->xres; - var->yres = par->yres; - var->xres_virtual = par->xres_vir; - var->yres_virtual = par->yres_vir; - var->xoffset = 0; - var->yoffset = 0; - - var->bits_per_pixel = par->bpp; - var->grayscale = 0; - - var->red = par->red; - var->green = par->green; - var->blue = par->blue; - var->transp = par->transp; - - var->nonstd = 0; - var->activate = 0; - - var->height = -1; - var->width = -1; - - var->accel = FB_ACCEL_RETINAZ3; - - var->pixclock = par->pixclock; - - var->sync = 0; /* ??? */ - var->left_margin = par->left_margin; - var->right_margin = par->right_margin; - var->upper_margin = par->upper_margin; - var->lower_margin = par->lower_margin; - var->hsync_len = par->hsync_len; - var->vsync_len = par->vsync_len; - - for (i = 0; i < arraysize(var->reserved); i++) - var->reserved[i] = 0; - - var->vmode = par->vmode; - return 0; -} - - -/* - * Set a single color register. The values supplied are already - * rounded down to the hardware's capabilities (according to the - * entries in the var structure). Return != 0 for invalid regno. - */ - -static int retz3_setcolreg(unsigned int regno, unsigned int red, - unsigned int green, unsigned int blue, - unsigned int transp) -{ - /* We'll get to this */ - - if (regno > 255) - return 1; - - retz3_color_table [regno][0] = red & 0xff; - retz3_color_table [regno][1] = green & 0xff; - retz3_color_table [regno][2] = blue & 0xff; - retz3_color_table [regno][3] = transp; - - reg_w(VDAC_ADDRESS_W, regno); - reg_w(VDAC_DATA, (red & 0xff) >> 2); - reg_w(VDAC_DATA, (green & 0xff) >> 2); - reg_w(VDAC_DATA, (blue & 0xff) >> 2); - - return 0; -} - - -/* - * Read a single color register and split it into - * colors/transparent. Return != 0 for invalid regno. - */ - -static int retz3_getcolreg(unsigned int regno, unsigned int *red, - unsigned int *green, unsigned int *blue, - unsigned int *transp) -{ - if (regno > 255) - return 1; - *red = retz3_color_table [regno][0]; - *green = retz3_color_table [regno][1]; - *blue = retz3_color_table [regno][2]; - *transp = retz3_color_table [regno][3]; - return 0; -} - - -/* - * (Un)Blank the screen - */ - -void retz3_blank(int blank) -{ - int i; - - if (blank) - for (i = 0; i < 256; i++){ - reg_w(VDAC_ADDRESS_W, i); - reg_w(VDAC_DATA, 0); - reg_w(VDAC_DATA, 0); - reg_w(VDAC_DATA, 0); - } - else - for (i = 0; i < 256; i++){ - reg_w(VDAC_ADDRESS_W, i); - reg_w(VDAC_DATA, retz3_color_table [i][0] >> 2); - reg_w(VDAC_DATA, retz3_color_table [i][1] >> 2); - reg_w(VDAC_DATA, retz3_color_table [i][2] >> 2); - } -} - - -void retz3_bitblt (struct fb_var_screeninfo *var, - unsigned short srcx, unsigned short srcy, unsigned - short destx, unsigned short desty, unsigned short - width, unsigned short height, unsigned short cmd, - unsigned short mask) -{ - - volatile unsigned long *acm = (unsigned long *) (z3_mem + ACM_OFFSET); - unsigned long *pattern = (unsigned long *)(z3_fbmem + PAT_MEM_OFF); - - unsigned short mod; - unsigned long tmp; - unsigned long pat, src, dst; - unsigned char blt_status; - - int i, xres_virtual = var->xres_virtual; - short bpp = (var->bits_per_pixel & 0xff); - - if (bpp < 8) - bpp = 8; - - tmp = mask | (mask << 16); - -#if 0 - /* - * Check for blitter finished before we start messing with the - * pattern. - */ - do{ - blt_status = *(((volatile unsigned char *)acm) + - (ACM_START_STATUS + 2)); - }while ((blt_status & 1) == 0); -#endif - - i = 0; - do{ - *pattern++ = tmp; - }while(i++ < bpp/4); - - tmp = cmd << 8; - *(acm + ACM_RASTEROP_ROTATION/4) = tmp; - - mod = 0xc0c2; - - pat = 8 * PAT_MEM_OFF; - dst = bpp * (destx + desty * xres_virtual); - - /* - * Source is not set for clear. - */ - if ((cmd != Z3BLTclear) && (cmd != Z3BLTset)) { - src = bpp * (srcx + srcy * xres_virtual); - - if (destx > srcx) { - mod &= ~0x8000; - src += bpp * (width - 1); - dst += bpp * (width - 1); - pat += bpp * 2; - } - if (desty > srcy) { - mod &= ~0x4000; - src += bpp * (height - 1) * xres_virtual; - dst += bpp * (height - 1) * xres_virtual; - pat += bpp * 4; - } - - *(acm + ACM_SOURCE/4) = cpu_to_le32(src); - } - - *(acm + ACM_PATTERN/4) = cpu_to_le32(pat); - - *(acm + ACM_DESTINATION/4) = cpu_to_le32(dst); - - tmp = mod << 16; - *(acm + ACM_CONTROL/4) = tmp; - - tmp = width | (height << 16); - - *(acm + ACM_BITMAP_DIMENSION/4) = cpu_to_le32(tmp); - - *(((volatile unsigned char *)acm) + ACM_START_STATUS) = 0x00; - *(((volatile unsigned char *)acm) + ACM_START_STATUS) = 0x01; - - /* - * No reason to wait for the blitter to finish, it is better - * just to check if it has finished before we use it again. - */ -#if 1 -#if 0 - while ((*(((volatile unsigned char *)acm) + - (ACM_START_STATUS + 2)) & 1) == 0); -#else - do{ - blt_status = *(((volatile unsigned char *)acm) + - (ACM_START_STATUS + 2)); - } - while ((blt_status & 1) == 0); -#endif -#endif -} +#include <linux/init.h> -#if 0 -void retz3_fill (unsigned short x, unsigned short y, unsigned - short width, unsigned short height, - unsigned short mode, unsigned short color) -{ - -} -#endif - - -/************************************************************** - * Move cursor to x, y - */ -void retz3_MoveCursor (unsigned short x, unsigned short y) -{ - /* Guess we gotta deal with the cursor at some point */ -} - - -/* -------------------- Interfaces to hardware functions -------------------- */ - - -static struct fb_hwswitch retz3_switch = { - retz3_init, retz3_encode_fix, retz3_decode_var, retz3_encode_var, - retz3_getcolreg, retz3_setcolreg, retz3_blank -}; - - -/* -------------------- Generic routines ------------------------------------ */ - - -/* - * Fill the hardware's `par' structure. - */ - -static void retz3_fb_get_par(struct retz3_fb_par *par) -{ - if (current_par_valid) - *par = current_par; - else - fbhw->decode_var(&retz3_fb_predefined[z3fb_mode], par); -} - - -static void retz3_fb_set_par(struct retz3_fb_par *par) -{ - current_par = *par; - current_par_valid = 1; -} - - -static int do_fb_set_var(struct fb_var_screeninfo *var, int isactive) -{ - int err, activate; - struct retz3_fb_par par; - - if ((err = fbhw->decode_var(var, &par))) - return err; - activate = var->activate; - if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW && isactive) - retz3_fb_set_par(&par); - fbhw->encode_var(var, &par); - var->activate = activate; - -#if 1 - retz3_set_video(var, ¤t_par); -#endif - return 0; -} - - -/* - * Default Colormaps - */ - -static unsigned short red16[] = - { 0x0000, 0x0000, 0x0000, 0x0000, 0xc000, 0xc000, 0xc000, 0xc000, - 0x8000, 0x0000, 0x0000, 0x0000, 0xffff, 0xffff, 0xffff, 0xffff }; -static unsigned short green16[] = - { 0x0000, 0x0000, 0xc000, 0xc000, 0x0000, 0x0000, 0xc000, 0xc000, - 0x8000, 0x0000, 0xffff, 0xffff, 0x0000, 0x0000, 0xffff, 0xffff }; -static unsigned short blue16[] = - { 0x0000, 0xc000, 0x0000, 0xc000, 0x0000, 0xc000, 0x0000, 0xc000, - 0x8000, 0xffff, 0x0000, 0xffff, 0x0000, 0xffff, 0x0000, 0xffff }; - - -static struct fb_cmap default_16_colors = - { 0, 16, red16, green16, blue16, NULL }; - - -static struct fb_cmap *get_default_colormap(int bpp) -{ - return &default_16_colors; -} - - -#define CNVT_TOHW(val,width) ((((val)<<(width))+0x7fff-(val))>>16) -#define CNVT_FROMHW(val,width) (((width) ? ((((val)<<16)-(val)) / \ - ((1<<(width))-1)) : 0)) - -static int do_fb_get_cmap(struct fb_cmap *cmap, struct fb_var_screeninfo *var, - int kspc) -{ - int i, start; - unsigned short *red, *green, *blue, *transp; - unsigned int hred, hgreen, hblue, htransp; - - red = cmap->red; - green = cmap->green; - blue = cmap->blue; - transp = cmap->transp; - start = cmap->start; - - if (start < 0) - return -EINVAL; - for (i = 0; i < cmap->len; i++) { - if (fbhw->getcolreg(start++, &hred, &hgreen, &hblue, &htransp)) - return 0; - hred = CNVT_FROMHW(hred, var->red.length); - hgreen = CNVT_FROMHW(hgreen, var->green.length); - hblue = CNVT_FROMHW(hblue, var->blue.length); - htransp = CNVT_FROMHW(htransp, var->transp.length); - if (kspc) { - *red = hred; - *green = hgreen; - *blue = hblue; - if (transp) - *transp = htransp; - } else { - put_user(hred, red); - put_user(hgreen, green); - put_user(hblue, blue); - if (transp) - put_user(htransp, transp); - } - red++; - green++; - blue++; - if (transp) - transp++; - } - return 0; -} - - -static int do_fb_set_cmap(struct fb_cmap *cmap, struct fb_var_screeninfo *var, - int kspc) -{ - int i, start; - unsigned short *red, *green, *blue, *transp; - unsigned int hred, hgreen, hblue, htransp; - - red = cmap->red; - green = cmap->green; - blue = cmap->blue; - transp = cmap->transp; - start = cmap->start; - - if (start < 0) - return -EINVAL; - for (i = 0; i < cmap->len; i++) { - if (kspc) { - hred = *red; - hgreen = *green; - hblue = *blue; - htransp = transp ? *transp : 0; - } else { - get_user(hred, red); - get_user(hgreen, green); - get_user(hblue, blue); - if (transp) - get_user(htransp, transp); - else - htransp = 0; - } - hred = CNVT_TOHW(hred, var->red.length); - hgreen = CNVT_TOHW(hgreen, var->green.length); - hblue = CNVT_TOHW(hblue, var->blue.length); - htransp = CNVT_TOHW(htransp, var->transp.length); - red++; - green++; - blue++; - if (transp) - transp++; - if (fbhw->setcolreg(start++, hred, hgreen, hblue, htransp)) - return 0; - } - return 0; -} - - -static void do_install_cmap(int con) -{ - if (con != currcon) - return; - if (disp[con].cmap.len) - do_fb_set_cmap(&disp[con].cmap, &disp[con].var, 1); - else - do_fb_set_cmap(get_default_colormap(disp[con].var.bits_per_pixel), - &disp[con].var, 1); -} - - -static void memcpy_fs(int fsfromto, void *to, void *from, int len) -{ - switch (fsfromto) { - case 0: - memcpy(to, from, len); - return; - case 1: - copy_from_user(to, from, len); - return; - case 2: - copy_to_user(to, from, len); - return; - } -} - - -static void copy_cmap(struct fb_cmap *from, struct fb_cmap *to, int fsfromto) -{ - int size; - int tooff = 0, fromoff = 0; - - if (to->start > from->start) - fromoff = to->start-from->start; - else - tooff = from->start-to->start; - size = to->len-tooff; - if (size > from->len-fromoff) - size = from->len-fromoff; - if (size < 0) - return; - size *= sizeof(unsigned short); - memcpy_fs(fsfromto, to->red+tooff, from->red+fromoff, size); - memcpy_fs(fsfromto, to->green+tooff, from->green+fromoff, size); - memcpy_fs(fsfromto, to->blue+tooff, from->blue+fromoff, size); - if (from->transp && to->transp) - memcpy_fs(fsfromto, to->transp+tooff, - from->transp+fromoff, size); -} - - -static int alloc_cmap(struct fb_cmap *cmap, int len, int transp) -{ - int size = len*sizeof(unsigned short); - - if (cmap->len != len) { - if (cmap->red) - kfree(cmap->red); - if (cmap->green) - kfree(cmap->green); - if (cmap->blue) - kfree(cmap->blue); - if (cmap->transp) - kfree(cmap->transp); - cmap->red = cmap->green = cmap->blue = cmap->transp = NULL; - cmap->len = 0; - if (!len) - return 0; - if (!(cmap->red = kmalloc(size, GFP_ATOMIC))) - return -1; - if (!(cmap->green = kmalloc(size, GFP_ATOMIC))) - return -1; - if (!(cmap->blue = kmalloc(size, GFP_ATOMIC))) - return -1; - if (transp) { - if (!(cmap->transp = kmalloc(size, GFP_ATOMIC))) - return -1; - } else - cmap->transp = NULL; - } - cmap->start = 0; - cmap->len = len; - copy_cmap(get_default_colormap(len), cmap, 0); - return 0; -} - - -/* - * Get the Fixed Part of the Display - */ - -static int retz3_fb_get_fix(struct fb_fix_screeninfo *fix, int con) -{ - struct retz3_fb_par par; - int error = 0; - - if (con == -1) - retz3_fb_get_par(&par); - else - error = fbhw->decode_var(&disp[con].var, &par); - return(error ? error : fbhw->encode_fix(fix, &par)); -} - - -/* - * Get the User Defined Part of the Display - */ - -static int retz3_fb_get_var(struct fb_var_screeninfo *var, int con) -{ - struct retz3_fb_par par; - int error = 0; - - if (con == -1) { - retz3_fb_get_par(&par); - error = fbhw->encode_var(var, &par); - } else - *var = disp[con].var; - return error; -} - - -static void retz3_fb_set_disp(int con) -{ - struct fb_fix_screeninfo fix; - - retz3_fb_get_fix(&fix, con); - if (con == -1) - con = 0; - disp[con].screen_base = (unsigned char *)fix.smem_start; - disp[con].visual = fix.visual; - disp[con].type = fix.type; - disp[con].type_aux = fix.type_aux; - disp[con].ypanstep = fix.ypanstep; - disp[con].ywrapstep = fix.ywrapstep; - disp[con].can_soft_blank = 1; - disp[con].inverse = z3fb_inverse; -} - - -/* - * Set the User Defined Part of the Display - */ - -static int retz3_fb_set_var(struct fb_var_screeninfo *var, int con) -{ - int err, oldxres, oldyres, oldvxres, oldvyres, oldbpp; - - if ((err = do_fb_set_var(var, con == currcon))) - return err; - if ((var->activate & FB_ACTIVATE_MASK) == FB_ACTIVATE_NOW) { - oldxres = disp[con].var.xres; - oldyres = disp[con].var.yres; - oldvxres = disp[con].var.xres_virtual; - oldvyres = disp[con].var.yres_virtual; - oldbpp = disp[con].var.bits_per_pixel; - disp[con].var = *var; - if (oldxres != var->xres || oldyres != var->yres || - oldvxres != var->xres_virtual || - oldvyres != var->yres_virtual || - oldbpp != var->bits_per_pixel) { - retz3_fb_set_disp(con); - (*fb_info.changevar)(con); - alloc_cmap(&disp[con].cmap, 0, 0); - do_install_cmap(con); - } - } - var->activate = 0; - return 0; -} - - -/* - * Get the Colormap - */ - -static int retz3_fb_get_cmap(struct fb_cmap *cmap, int kspc, int con) -{ - if (con == currcon) /* current console? */ - return(do_fb_get_cmap(cmap, &disp[con].var, kspc)); - else if (disp[con].cmap.len) /* non default colormap? */ - copy_cmap(&disp[con].cmap, cmap, kspc ? 0 : 2); - else - copy_cmap(get_default_colormap(disp[con].var.bits_per_pixel), - cmap, kspc ? 0 : 2); - return 0; -} - - -/* - * Set the Colormap - */ - -static int retz3_fb_set_cmap(struct fb_cmap *cmap, int kspc, int con) -{ - int err; - - if (!disp[con].cmap.len) { /* no colormap allocated? */ - if ((err = alloc_cmap(&disp[con].cmap, - 1<<disp[con].var.bits_per_pixel, 0))) - return err; - } - if (con == currcon) /* current console? */ - return(do_fb_set_cmap(cmap, &disp[con].var, kspc)); - else - copy_cmap(cmap, &disp[con].cmap, kspc ? 0 : 1); - return 0; -} - - -/* - * Pan or Wrap the Display - * - * This call looks only at xoffset, yoffset and the FB_VMODE_YWRAP flag - */ - -static int retz3_fb_pan_display(struct fb_var_screeninfo *var, int con) -{ - return -EINVAL; -} - - -/* - * RetinaZ3 Frame Buffer Specific ioctls - */ - -static int retz3_fb_ioctl(struct inode *inode, struct file *file, - unsigned int cmd, unsigned long arg, int con) -{ - return -EINVAL; -} - - -static struct fb_ops retz3_fb_ops = { - retz3_fb_get_fix, retz3_fb_get_var, retz3_fb_set_var, retz3_fb_get_cmap, - retz3_fb_set_cmap, retz3_fb_pan_display, retz3_fb_ioctl -}; - - -int retz3_probe(void) -{ - z3_key = zorro_find(MANUF_MACROSYSTEMS2, PROD_RETINA_Z3, 0, 0); - return(z3_key); -} - - -void retz3_video_setup(char *options, int *ints) -{ - char *this_opt; - int i; - - fb_info.fontname[0] = '\0'; - - if (!options || !*options) - return; - - for (this_opt = strtok(options, ","); this_opt; - this_opt = strtok(NULL, ",")){ - if (!strcmp(this_opt, "inverse")) { - z3fb_inverse = 1; - for (i = 0; i < 16; i++) { - red16[i] = ~red16[i]; - green16[i] = ~green16[i]; - blue16[i] = ~blue16[i]; - } - } else if (!strncmp(this_opt, "font:", 5)) - strcpy(fb_info.fontname, this_opt+5); - else - z3fb_mode = get_video_mode(this_opt); - } -} - - -/* - * Initialization - */ - -struct fb_info *retz3_fb_init(long *mem_start) -{ - int err; - struct retz3_fb_par par; - - memstart = mem_start; - - fbhw = &retz3_switch; - - err = register_framebuffer(retz3_fb_name, &node, &retz3_fb_ops, - NUM_TOTAL_MODES, retz3_fb_predefined); - if (err < 0) - panic("Cannot register frame buffer\n"); - - fbhw->init(); - - if (z3fb_mode == -1) - z3fb_mode = 1; - - fbhw->decode_var(&retz3_fb_predefined[z3fb_mode], &par); - fbhw->encode_var(&retz3_fb_predefined[0], &par); - - strcpy(fb_info.modename, retz3_fb_name); - fb_info.disp = disp; - fb_info.switch_con = &z3fb_switch; - fb_info.updatevar = &z3fb_updatevar; - fb_info.blank = &z3fb_blank; - fb_info.setcmap = &z3fb_setcmap; - - do_fb_set_var(&retz3_fb_predefined[0], 0); - retz3_fb_get_var(&disp[0].var, -1); - retz3_fb_set_disp(-1); - do_install_cmap(0); - - return &fb_info; -} - - -static int z3fb_switch(int con) -{ - /* Do we have to save the colormap? */ - if (disp[currcon].cmap.len) - do_fb_get_cmap(&disp[currcon].cmap, &disp[currcon].var, 1); - - do_fb_set_var(&disp[con].var, 1); - currcon = con; - /* Install new colormap */ - do_install_cmap(con); - return 0; -} - - -/* - * Update the `var' structure (called by fbcon.c) - * - * This call looks only at yoffset and the FB_VMODE_YWRAP flag in `var'. - * Since it's called by a kernel driver, no range checking is done. - */ - -static int z3fb_updatevar(int con) -{ - return 0; -} - - -/* - * Blank the display. - */ - -static void z3fb_blank(int blank) -{ - fbhw->blank(blank); -} - - -/* - * Set the colormap - */ - -static int z3fb_setcmap(struct fb_cmap *cmap, int con) -{ - return(retz3_fb_set_cmap(cmap, 1, con)); -} - - -/* - * Get a Video Mode - */ - -static int get_video_mode(const char *name) -{ - int i; - - for (i = 1; i <= NUM_PREDEF_MODES; i++) - if (!strcmp(name, retz3_fb_modenames[i])){ - retz3_fb_predefined[0] = retz3_fb_predefined[i]; - return i; - } - return -1; -} -/* - * Linux/arch/m68k/amiga/retz3fb.c -- Low level implementation of the - * RetinaZ3 frame buffer device - * - * Copyright (C) 1997 Jes Sorensen - * - * This file is based on the CyberVision64 frame buffer device and - * the generic Cirrus Logic driver. - * - * cyberfb.c: Copyright (C) 1996 Martin Apel, - * Geert Uytterhoeven - * clgen.c: Copyright (C) 1996 Frank Neumann - * - * History: - * - 22 Jan 97: Initial work - * - 14 Feb 97: Screen initialization works somewhat, still only - * 8-bit packed pixel is supported. - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file COPYING in the main directory of this archive - * for more details. - */ - - -#include <linux/kernel.h> -#include <linux/errno.h> -#include <linux/string.h> -#include <linux/mm.h> -#include <linux/tty.h> -#include <linux/malloc.h> -#include <linux/delay.h> -#include <linux/fb.h> #include <asm/uaccess.h> #include <asm/system.h> #include <asm/irq.h> -#include <linux/zorro.h> #include <asm/pgtable.h> #include "retz3fb.h" @@ -3402,7 +1652,7 @@ void retz3_video_setup(char *options, int *ints) * Initialization */ -struct fb_info *retz3_fb_init(long *mem_start) +__initfunc(struct fb_info *retz3_fb_init(long *mem_start)) { int err; struct retz3_fb_par par; |