diff options
Diffstat (limited to 'arch/m68k/config.in')
| -rw-r--r-- | arch/m68k/config.in | 117 |
1 files changed, 103 insertions, 14 deletions
diff --git a/arch/m68k/config.in b/arch/m68k/config.in index a67227d60..a8dacc904 100644 --- a/arch/m68k/config.in +++ b/arch/m68k/config.in @@ -37,6 +37,7 @@ fi bool 'Apollo support' CONFIG_APOLLO bool 'VME (Motorola and BVM) support' CONFIG_VME if [ "$CONFIG_VME" = "y" ]; then + bool 'MVME147 support' CONFIG_MVME147 bool 'MVME162, 166 and 167 support' CONFIG_MVME16x bool 'BVME4000 and BVME6000 support' CONFIG_BVME6000 fi @@ -44,10 +45,13 @@ bool 'HP9000/300 support' CONFIG_HP300 if [ "$CONFIG_HP300" = "y" ]; then bool 'DIO bus support' CONFIG_DIO fi +bool 'Sun3x support' CONFIG_SUN3X + define_bool CONFIG_SUN3 n if [ "$CONFIG_PCI" = "y" ]; then bool 'Backward-compatible /proc/pci' CONFIG_PCI_OLD_PROC fi +bool 'Q40/Q60 support' CONFIG_Q40 comment 'Processor type' bool '68020 support' CONFIG_M68020 @@ -94,6 +98,29 @@ else fi fi bool '/proc/hardware support' CONFIG_PROC_HARDWARE + +if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate 'Parallel port support (EXPERIMENTAL, disables old lp driver!)' CONFIG_PARPORT + if [ "$CONFIG_PARPORT" != "n" ]; then + if [ "$CONFIG_AMIGA" != "n" ]; then + dep_tristate ' Amiga builtin port' CONFIG_PARPORT_AMIGA $CONFIG_PARPORT + if [ "$CONFIG_ZORRO" != "n" ]; then + dep_tristate ' Multiface III parallel port' CONFIG_PARPORT_MFC3 $CONFIG_PARPORT + fi + fi + if [ "$CONFIG_Q40" != "n" ]; then + tristate ' Q40 Parallel port' CONFIG_PARPORT + if [ "$CONFIG_PARPORT" != "n" ]; then + define_bool CONFIG_PARPORT_PC y + fi + fi + fi + if [ "$CONFIG_ATARI" == "y" ]; then + dep_tristate ' Atari builtin port' CONFIG_PARPORT_ATARI $CONFIG_PARPORT + fi +fi + + endmenu source drivers/block/Config.in @@ -147,6 +174,7 @@ if [ "$CONFIG_ZORRO" = "y" ]; then bool 'A4091 SCSI support' CONFIG_A4091_SCSI bool 'WarpEngine SCSI support' CONFIG_WARPENGINE_SCSI bool 'Blizzard PowerUP 603e+ SCSI' CONFIG_BLZ603EPLUS_SCSI + dep_tristate 'BSC Oktagon SCSI support' CONFIG_OKTAGON_SCSI $CONFIG_SCSI bool 'Cyberstorm Mk III SCSI support' CONFIG_CYBERSTORMIII_SCSI # bool 'GVP Turbo 040/060 SCSI support' CONFIG_GVP_TURBO_SCSI fi @@ -167,6 +195,10 @@ if [ "$CONFIG_MAC" = "y" ]; then fi #dep_tristate 'SCSI debugging host adapter' CONFIG_SCSI_DEBUG $CONFIG_SCSI +if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then + bool 'WD33C93 SCSI driver for MVME147' CONFIG_MVME147_SCSI +fi + if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then bool 'NCR53C710 SCSI driver for MVME16x' CONFIG_MVME16x_SCSI fi @@ -175,6 +207,10 @@ if [ "$CONFIG_VME" = "y" -a "$CONFIG_BVME6000" = "y" ]; then bool 'NCR53C710 SCSI driver for BVME6000' CONFIG_BVME6000_SCSI fi +if [ "$CONFIG_SUN3X" = "y" ]; then + bool 'ESP SCSI driver' CONFIG_SUN3X_ESP +fi + endmenu fi @@ -219,6 +255,9 @@ if [ "$CONFIG_MAC" = "y" ]; then # bool 'Macintosh (AV) onboard MACE ethernet' CONFIG_MACMACE bool 'Macintosh (Quadra) onboard SONIC ethernet' CONFIG_MACSONIC fi +if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME147" = "y" ]; then + tristate 'MVME147 (Lance) Ethernet support' CONFIG_MVME147_NET +fi if [ "$CONFIG_VME" = "y" -a "$CONFIG_MVME16x" = "y" ]; then tristate 'MVME16x Ethernet support' CONFIG_MVME16x_NET fi @@ -232,9 +271,17 @@ if [ "$CONFIG_ATARI" = "y" ]; then tristate 'PAMsNet support' CONFIG_ATARI_PAMSNET fi fi +if [ "$CONFIG_SUN3X" = "y" ]; then + bool 'Sun3x Lance support' CONFIG_SUNLANCE +fi if [ "$CONFIG_HP300" = "y" ]; then bool 'HP on-board LANCE support' CONFIG_HPLANCE fi +if [ "$CONFIG_Q40" = "y" ]; then + if [ ! "$CONFIG_PARPORT" = "n" ]; then + dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT + fi +fi fi endmenu @@ -243,6 +290,23 @@ fi mainmenu_option next_comment comment 'Character devices' +if [ "$CONFIG_Q40" = "y" ]; then + tristate 'Q40 Standard/generic serial support' CONFIG_SERIAL +fi + +if [ "$CONFIG_SERIAL" = "y" ]; then + bool ' Support for console on serial port' CONFIG_SERIAL_CONSOLE + bool 'Extended dumb serial driver options' CONFIG_SERIAL_EXTENDED +fi + +if [ "$CONFIG_SERIAL_EXTENDED" = "y" ]; then + bool ' Support more than 4 serial ports' CONFIG_SERIAL_MANY_PORTS + bool ' Support for sharing serial interrupts' CONFIG_SERIAL_SHARE_IRQ +# bool ' Autodetect IRQ - do not yet enable !!' CONFIG_SERIAL_DETECT_IRQ + bool ' Support special multiport boards' CONFIG_SERIAL_MULTIPORT + bool ' Support the Bell Technologies HUB6 card' CONFIG_HUB6 +fi + if [ "$CONFIG_VME" = "n" ]; then define_bool CONFIG_VT y if [ "$CONFIG_VT" = "y" ]; then @@ -254,10 +318,17 @@ if [ "$CONFIG_ATARI" = "y" ]; then define_bool CONFIG_NVRAM y fi -tristate 'Parallel printer support' CONFIG_M68K_PRINTER -if [ "$CONFIG_ZORRO" = "y" ]; then - dep_tristate 'Multiface Card III parallel support' CONFIG_MULTIFACE_III_LP $CONFIG_M68K_PRINTER -fi +if [ "$CONFIG_PARPORT" = "n" ]; then + tristate 'Parallel printer support' CONFIG_M68K_PRINTER + if [ "$CONFIG_ZORRO" = "y" ]; then + dep_tristate 'Multiface Card III parallel support' CONFIG_MULTIFACE_III_LP $CONFIG_M68K_PRINTER + fi +else + dep_tristate 'Parallel printer support' CONFIG_PRINTER $CONFIG_PARPORT + if [ "$CONFIG_PRINTER" != "n" ]; then + bool ' Support IEEE1284 status readback' CONFIG_PRINTER_READBACK + fi +fi if [ "$CONFIG_AMIGA" = "y" ]; then tristate 'Amiga mouse support' CONFIG_AMIGAMOUSE fi @@ -280,13 +351,17 @@ if [ "$CONFIG_ATARI" = "y" ]; then fi if [ "$CONFIG_AMIGA" = "y" ]; then tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL - bool 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET + if [ "$CONFIG_AMIGA_PCMCIA" = "y" ]; then + tristate 'Hisoft Whippet PCMCIA serial support' CONFIG_WHIPPET_SERIAL + fi fi -if [ "$CONFIG_ZORRO" = "y" ]; then - tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT - dep_tristate 'GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT - dep_tristate 'GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT - tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY +if [ "$CONFIG_PARPORT" = "n" ]; then + if [ "$CONFIG_ZORRO" = "y" ]; then + tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT + dep_tristate 'GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT + dep_tristate 'GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT + tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY + fi fi if [ "$CONFIG_MAC" = "y" ]; then bool 'Mac SCC serial support' CONFIG_MAC_SCC @@ -294,18 +369,32 @@ fi if [ "$CONFIG_HP300" = "y" -a "$CONFIG_DIO" = "y" ]; then tristate 'HP DCA serial support' CONFIG_HPDCA fi +if [ "$CONFIG_SUN3X" = "y" ]; then + bool 'Sun3x builtin serial support' CONFIG_SUN3X_ZS + if [ "$CONFIG_SUN3X_ZS" = "y" ]; then + bool 'Sun keyboard support' CONFIG_SUN_KEYBOARD + bool 'Sun mouse support' CONFIG_SUN_MOUSE + define_bool CONFIG_SBUS y + define_bool CONFIG_SBUSCHAR y + define_bool CONFIG_SUN_SERIAL y + fi +fi if [ "$CONFIG_AMIGA" = "y" -o "$CONFIG_ATARI" = "y" -o \ - "$CONFIG_MAC" = "y" -o "$CONFIG_HP300" = "y" ]; then + "$CONFIG_MAC" = "y" -o "$CONFIG_HP300" = "y" -o \ + "$CONFIG_SUN3X" = "y" ]; then if [ "$CONFIG_ATARI_MFPSER" = "y" -o "$CONFIG_ATARI_SCC" = "y" -o \ "$CONFIG_ATARI_MIDI" = "y" -o "$CONFIG_MAC_SCC" = "y" -o \ "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o \ "$CONFIG_GVPIOEXT" = "y" -o "$CONFIG_MULTIFACE_III_TTY" = "y" -o \ - "$CONFIG_HPDCA" = "y" ]; then + "$CONFIG_HPDCA" = "y" -o "$CONFIG_SUN3X_ZS" = "y" ]; then bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE fi fi if [ "$CONFIG_VME" = "y" ]; then define_bool CONFIG_SERIAL_CONSOLE y + if [ "$CONFIG_MVME147" = "y" ]; then + bool 'SCC support for MVME147 serial ports' CONFIG_MVME147_SCC + fi if [ "$CONFIG_MVME16x" = "y" ]; then bool 'CD2401 support for MVME166/7 serial ports' CONFIG_SERIAL167 bool 'SCC support for MVME162 serial ports' CONFIG_MVME162_SCC @@ -346,13 +435,13 @@ endmenu source fs/Config.in if [ "$CONFIG_VME" = "n" ]; then + mainmenu_option next_comment + comment 'Console drivers' if [ "$CONFIG_HP300" = "y" ]; then bool 'Frame buffer support' CONFIG_FB else define_bool CONFIG_FB y fi - mainmenu_option next_comment - comment 'Console drivers' source drivers/video/Config.in endmenu fi |