diff options
Diffstat (limited to 'arch/mips/ddb5xxx/common/nile4.c')
| -rw-r--r-- | arch/mips/ddb5xxx/common/nile4.c | 135 |
1 files changed, 135 insertions, 0 deletions
diff --git a/arch/mips/ddb5xxx/common/nile4.c b/arch/mips/ddb5xxx/common/nile4.c new file mode 100644 index 000000000..e8a8d013b --- /dev/null +++ b/arch/mips/ddb5xxx/common/nile4.c @@ -0,0 +1,135 @@ +/*********************************************************************** + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * arch/mips/ddb5xxx/common/nile4.c + * misc low-level routines for vrc-5xxx controllers. + * + * derived from original code by Geert Uytterhoeven <geert@sonycom.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + *********************************************************************** + */ + +#include <linux/config.h> +#include <linux/types.h> +#include <linux/kernel.h> + +#include <asm/ddb5xxx/ddb5xxx.h> +#include <asm/ddb5xxx/debug.h> + +u32 +ddb_calc_pdar(u32 phys, u32 size, int width, + int on_memory_bus, int pci_visible) +{ + u32 maskbits; + u32 widthbits; + + switch (size) { +#if 0 /* We don't support 4 GB yet */ + case 0x100000000: /* 4 GB */ + maskbits = 4; + break; +#endif + case 0x80000000: /* 2 GB */ + maskbits = 5; + break; + case 0x40000000: /* 1 GB */ + maskbits = 6; + break; + case 0x20000000: /* 512 MB */ + maskbits = 7; + break; + case 0x10000000: /* 256 MB */ + maskbits = 8; + break; + case 0x08000000: /* 128 MB */ + maskbits = 9; + break; + case 0x04000000: /* 64 MB */ + maskbits = 10; + break; + case 0x02000000: /* 32 MB */ + maskbits = 11; + break; + case 0x01000000: /* 16 MB */ + maskbits = 12; + break; + case 0x00800000: /* 8 MB */ + maskbits = 13; + break; + case 0x00400000: /* 4 MB */ + maskbits = 14; + break; + case 0x00200000: /* 2 MB */ + maskbits = 15; + break; + case 0: /* OFF */ + maskbits = 0; + break; + default: + panic("nile4_set_pdar: unsupported size %p\n", (void *) size); + } + switch (width) { + case 8: + widthbits = 0; + break; + case 16: + widthbits = 1; + break; + case 32: + widthbits = 2; + break; + case 64: + widthbits = 3; + break; + default: + panic("nile4_set_pdar: unsupported width %d\n", width); + } + + return maskbits | (on_memory_bus ? 0x10 : 0) | + (pci_visible ? 0x20 : 0) | (widthbits << 6) | + (phys & 0xffe00000); +} + +void +ddb_set_pdar(u32 pdar, u32 phys, u32 size, int width, + int on_memory_bus, int pci_visible) +{ + u32 temp= ddb_calc_pdar(phys, size, width, on_memory_bus, pci_visible); + ddb_out32(pdar, temp); + ddb_out32(pdar + 4, 0); + + /* + * When programming a PDAR, the register should be read immediately + * after writing it. This ensures that address decoders are properly + * configured. + * [jsun] is this really necesary? + */ + ddb_in32(pdar); + ddb_in32(pdar + 4); +} + +/* + * routines that mess with PCIINITx registers + */ + +void ddb_set_pmr(u32 pmr, u32 type, u32 addr, u32 options) +{ + switch (type) { + case DDB_PCICMD_IACK: /* PCI Interrupt Acknowledge */ + case DDB_PCICMD_IO: /* PCI I/O Space */ + case DDB_PCICMD_MEM: /* PCI Memory Space */ + case DDB_PCICMD_CFG: /* PCI Configuration Space */ + break; + default: + panic("nile4_set_pmr: invalid type %d\n", type); + } + ddb_out32(pmr, (type << 1) | (addr & 0xffe00000) | options ); + ddb_out32(pmr + 4, 0); +} |