diff options
Diffstat (limited to 'arch/mips/ddb5xxx/ddb5477/irq.c')
| -rw-r--r-- | arch/mips/ddb5xxx/ddb5477/irq.c | 193 |
1 files changed, 193 insertions, 0 deletions
diff --git a/arch/mips/ddb5xxx/ddb5477/irq.c b/arch/mips/ddb5xxx/ddb5477/irq.c new file mode 100644 index 000000000..5b4ca0673 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5477/irq.c @@ -0,0 +1,193 @@ +/*********************************************************************** + * Copyright 2001 MontaVista Software Inc. + * Author: Jun Sun, jsun@mvista.com or jsun@junsun.net + * + * arch/mips/ddb5xxx/ddb5477/irq.c + * The irq setup and misc routines for DDB5476. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + *********************************************************************** + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/irq.h> +#include <linux/types.h> +#include <linux/ptrace.h> + +#include <asm/system.h> +#include <asm/mipsregs.h> +#include <asm/ddb5xxx/ddb5xxx.h> + +/* [jsun] sooner or later we should move this debug stuff to MIPS common */ +#include <asm/ddb5xxx/debug.h> + +/* + * IRQ mapping + * + * 0-7: 8 CPU interrupts + * 0 - software interrupt 0 + * 1 - software interrupt 1 + * 2 - most Vrc5477 interrupts are routed to this pin + * 3 - (optional) some other interrupts routed to this pin for debugg + * 4 - not used + * 5 - not used + * 6 - not used + * 7 - cpu timer (used by default) + * + * 8-39: 32 Vrc5477 interrupt sources + * (refer to the Vrc5477 manual) + */ + +#define PCI0 DDB_INTPPES0 +#define PCI1 DDB_INTPPES1 + +#define ACTIVE_LOW 1 +#define ACTIVE_HIGH 0 + +#define LEVEL_SENSE 2 +#define EDGE_TRIGGER 0 + +#define INTA 0 +#define INTB 1 +#define INTC 2 +#define INTD 3 +#define INTE 4 + +static inline void +set_pci_int_attr(u32 pci, u32 intn, u32 active, u32 trigger) +{ + u32 reg_value; + u32 reg_bitmask; + + reg_value = ddb_in32(pci); + reg_bitmask = 0x3 << (intn * 2); + + reg_value &= ~reg_bitmask; + reg_value |= (active | trigger) << (intn * 2); + ddb_out32(pci, reg_value); +} + +extern void vrc5477_irq_init(u32 base); +extern void mips_cpu_irq_init(u32 base); +extern asmlinkage void ddb5477_handle_int(void); + +#if defined(CONFIG_LL_DEBUG) +extern int setup_irq(unsigned int irq, struct irqaction *irqaction); +extern struct irqaction heartbeat_irqaction; +#endif + +void +ddb5477_irq_setup(void) +{ + MIPS_DEBUG(printk("ddb5477_irq_setup invoked.\n")); + + /* by default, we disable all interrupts and route all vrc5477 + * interrupts to pin 0 (irq 2) */ + ddb_out32(DDB_INTCTRL0, 0); + ddb_out32(DDB_INTCTRL1, 0); + ddb_out32(DDB_INTCTRL2, 0); + ddb_out32(DDB_INTCTRL3, 0); + + clear_cp0_status(0xff00); + set_cp0_status(0x0400); + + /* setup PCI interrupt attributes */ + set_pci_int_attr(PCI0, INTA, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI0, INTB, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI0, INTC, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI0, INTD, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI0, INTE, ACTIVE_LOW, LEVEL_SENSE); + + set_pci_int_attr(PCI1, INTA, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI1, INTB, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI1, INTC, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI1, INTD, ACTIVE_LOW, LEVEL_SENSE); + set_pci_int_attr(PCI1, INTE, ACTIVE_LOW, LEVEL_SENSE); + + /* + * for debugging purpose, we enable several error interrupts + * and route them to pin 1. (IP3) + */ + /* cpu parity check - 0 */ + ll_vrc5477_irq_route(0, 1); ll_vrc5477_irq_enable(0); + /* cpu no-target decode - 1 */ + ll_vrc5477_irq_route(1, 1); ll_vrc5477_irq_enable(1); + /* local bus read time-out - 7 */ + ll_vrc5477_irq_route(7, 1); ll_vrc5477_irq_enable(7); + /* PCI SERR# - 14 */ + ll_vrc5477_irq_route(14, 1); ll_vrc5477_irq_enable(14); + /* PCI internal error - 15 */ + ll_vrc5477_irq_route(15, 1); ll_vrc5477_irq_enable(15); + /* IOPCI SERR# - 30 */ + ll_vrc5477_irq_route(30, 1); ll_vrc5477_irq_enable(30); + /* IOPCI internal error - 31 */ + ll_vrc5477_irq_route(31, 1); ll_vrc5477_irq_enable(31); + + /* init all controllers */ + mips_cpu_irq_init(0); + vrc5477_irq_init(8); + + /* hook up the first-level interrupt handler */ + set_except_vector(0, ddb5477_handle_int); + +#if defined(CONFIG_LL_DEBUG) + setup_irq(0, &heartbeat_irqaction); +#endif +} + +/* + * the first level int-handler will jump here if it is a vrc5477 irq + */ +#define NUM_5477_IRQS 32 +asmlinkage void +vrc5477_irq_dispatch(struct pt_regs *regs) +{ + extern unsigned int do_IRQ(int irq, struct pt_regs *regs); + + u32 intStatus; + u32 bitmask; + u32 i; + + MIPS_ASSERT(ddb_in32(DDB_INT2STAT) == 0); + MIPS_ASSERT(ddb_in32(DDB_INT3STAT) == 0); + MIPS_ASSERT(ddb_in32(DDB_INT4STAT) == 0); + MIPS_ASSERT(ddb_in32(DDB_NMISTAT) == 0); + + if (ddb_in32(DDB_INT1STAT) != 0) { +#if defined(CONFIG_LL_DEBUG) + vrc5477_show_int_regs(); +#endif + panic("error interrupt has happened.\n"); + } + + intStatus = ddb_in32(DDB_INT0STAT); + for (i=0, bitmask=1; i<= NUM_5477_IRQS; bitmask <<=1, i++) { + /* do we need to "and" with the int mask? */ + if (intStatus & bitmask) { + do_IRQ(8 + i, regs); + } + } +} + +void (*irq_setup)(void); + +void __init init_IRQ(void) +{ + +#ifdef CONFIG_REMOTE_DEBUG + extern void breakpoint(void); + extern void set_debug_traps(void); + + printk("Wait for gdb client connection ...\n"); + set_debug_traps(); + breakpoint(); +#endif + + /* invoke board-specific irq setup */ + irq_setup(); +} + |