diff options
Diffstat (limited to 'arch/mips/ddb5xxx/ddb5477/setup.c')
-rw-r--r-- | arch/mips/ddb5xxx/ddb5477/setup.c | 251 |
1 files changed, 251 insertions, 0 deletions
diff --git a/arch/mips/ddb5xxx/ddb5477/setup.c b/arch/mips/ddb5xxx/ddb5477/setup.c new file mode 100644 index 000000000..c236295f3 --- /dev/null +++ b/arch/mips/ddb5xxx/ddb5477/setup.c @@ -0,0 +1,251 @@ +/*********************************************************************** + * + * Copyright 2001 MontaVista Software Inc. + * Author: jsun@mvista.com or jsun@junsun.net + * + * arch/mips/ddb5xxx/ddb5477/setup.c + * Setup file for DDB5477. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + *********************************************************************** + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel.h> +#include <linux/kdev_t.h> +#include <linux/types.h> +#include <linux/console.h> +#include <linux/sched.h> +#include <linux/pci.h> +#include <linux/ide.h> +#include <linux/fs.h> /* for ROOT_DEV */ +#include <linux/ioport.h> +#include <linux/param.h> /* for HZ */ + +#include <asm/addrspace.h> +#include <asm/time.h> +#include <asm/bcache.h> +#include <asm/irq.h> +#include <asm/reboot.h> +#include <asm/gdb-stub.h> + +#include <asm/ddb5xxx/ddb5xxx.h> + + + +#define USE_CPU_COUNTER_TIMER /* whether we use cpu counter */ + +#ifdef USE_CPU_COUNTER_TIMER +#define CPU_COUNTER_FREQUENCY 83000000 +#else +/* otherwise we use special timer 1 */ +#define SP_TIMER_FREQUENCY 83000000 +#define SP_TIMER_BASE DDB_SPT1CTRL_L +#define SP_TIMER_IRQ (8 + 6) +#endif + +static void ddb_machine_restart(char *command) +{ + static void (*back_to_prom) (void) = (void (*)(void)) 0xbfc00000; + + u32 t; + + /* PCI cold reset */ + ddb_pci_reset_bus(); + + /* CPU cold reset */ + t = ddb_in32(DDB_CPUSTAT); + MIPS_ASSERT((t&1)); + ddb_out32(DDB_CPUSTAT, t); + + /* Call the PROM */ + back_to_prom(); +} + +static void ddb_machine_halt(void) +{ + printk("DDB Vrc-5477 halted.\n"); + while (1); +} + +static void ddb_machine_power_off(void) +{ + printk("DDB Vrc-5477 halted. Please turn off the power.\n"); + while (1); +} + +extern void rtc_ds1386_init(unsigned long base); +static void __init ddb_time_init(void) +{ +#if defined(USE_CPU_COUNTER_TIMER) + mips_counter_frequency = CPU_COUNTER_FREQUENCY; +#endif + + /* we have ds1396 RTC chip */ + rtc_ds1386_init(KSEG1ADDR(DDB_LCS1_BASE)); +} + +#if defined(CONFIG_LL_DEBUG) +int board_init_done_flag = 0; +#endif + +extern int setup_irq(unsigned int irq, struct irqaction *irqaction); +static void __init ddb_timer_setup(struct irqaction *irq) +{ +#if defined(USE_CPU_COUNTER_TIMER) + unsigned int count; + + /* we are using the cpu counter for timer interrupts */ + setup_irq(7, irq); + + /* to generate the first timer interrupt */ + count = read_32bit_cp0_register(CP0_COUNT); + write_32bit_cp0_register(CP0_COMPARE, count + 1000); + +#else + + /* if we don't use Special purpose timer 1 */ + ddb_out32(SP_TIMER_BASE, SP_TIMER_FREQUENCY/HZ); + ddb_out32(SP_TIMER_BASE+4, 0x1); + setup_irq(SP_TIMER_IRQ, irq); + +#endif + + /* this is the last board dependent code */ + MIPS_DEBUG(board_init_done_flag = 1); +} + +static void ddb5477_board_init(void); +extern void ddb5477_irq_setup(void); + +#if defined(CONFIG_BLK_DEV_INITRD) +extern unsigned long __rd_start, __rd_end, initrd_start, initrd_end; +#endif + +void __init ddb_setup(void) +{ + extern int panic_timeout; + + irq_setup = ddb5477_irq_setup; + mips_io_port_base = KSEG1ADDR(DDB_PCI_IO_BASE); + + board_time_init = ddb_time_init; + board_timer_setup = ddb_timer_setup; + + _machine_restart = ddb_machine_restart; + _machine_halt = ddb_machine_halt; + _machine_power_off = ddb_machine_power_off; + + /* setup resource limits */ + ioport_resource.end = DDB_PCI0_IO_SIZE + DDB_PCI1_IO_SIZE - 1; + iomem_resource.end = 0xffffffff; + + /* Reboot on panic */ + panic_timeout = 180; + + /* initialize board - we don't trust the loader */ + ddb5477_board_init(); + +#if defined(CONFIG_BLK_DEV_INITRD) + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); + initrd_start = (unsigned long)&__rd_start; + initrd_end = (unsigned long)&__rd_end; +#endif + +} + +static void __init ddb5477_board_init() +{ + /* ----------- setup PDARs ------------ */ + + /* SDRAM should have been set */ + MIPS_ASSERT(ddb_in32(DDB_SDRAM0) == + ddb_calc_pdar(DDB_SDRAM_BASE, DDB_SDRAM_SIZE, 32, 0, 1)); + + /* SDRAM1 should be turned off. What is this for anyway ? */ + MIPS_ASSERT( (ddb_in32(DDB_SDRAM1) & 0xf) == 0); + + /* Set LDCSs */ + /* flash */ + ddb_set_pdar(DDB_LCS0, DDB_LCS0_BASE, DDB_LCS0_SIZE, 16, 0, 0); + /* misc */ + ddb_set_pdar(DDB_LCS1, DDB_LCS1_BASE, DDB_LCS1_SIZE, 8, 0, 0); + /* mezzanie (?) */ + ddb_set_pdar(DDB_LCS2, DDB_LCS2_BASE, DDB_LCS2_SIZE, 16, 0, 0); + + /* verify VRC5477 base addr */ + MIPS_ASSERT(ddb_in32(DDB_VRC5477) == + ddb_calc_pdar(DDB_VRC5477_BASE, DDB_VRC5477_SIZE, 32, 0, 1)); + + /* verify BOOT ROM addr */ + MIPS_ASSERT(ddb_in32(DDB_BOOTCS) == + ddb_calc_pdar(DDB_BOOTCS_BASE, DDB_BOOTCS_SIZE, 8, 0, 0)); + + /* setup PCI windows - window0 for MEM/config, window1 for IO */ + ddb_set_pdar(DDB_PCIW0, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1); + ddb_set_pdar(DDB_PCIW1, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1); + ddb_set_pdar(DDB_IOPCIW0, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1); + ddb_set_pdar(DDB_IOPCIW1, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1); + + /* ------------ reset PCI bus and BARs ----------------- */ + ddb_pci_reset_bus(); + + ddb_out32(DDB_BARM010, 0x00000008); + ddb_out32(DDB_BARM011, 0x00000008); + + ddb_out32(DDB_BARC0, 0xffffffff); + ddb_out32(DDB_BARM230, 0xffffffff); + ddb_out32(DDB_BAR00, 0xffffffff); + ddb_out32(DDB_BAR10, 0xffffffff); + ddb_out32(DDB_BAR20, 0xffffffff); + ddb_out32(DDB_BAR30, 0xffffffff); + ddb_out32(DDB_BAR40, 0xffffffff); + ddb_out32(DDB_BAR50, 0xffffffff); + ddb_out32(DDB_BARB0, 0xffffffff); + + ddb_out32(DDB_BARC1, 0xffffffff); + ddb_out32(DDB_BARM231, 0xffffffff); + ddb_out32(DDB_BAR01, 0xffffffff); + ddb_out32(DDB_BAR11, 0xffffffff); + ddb_out32(DDB_BAR21, 0xffffffff); + ddb_out32(DDB_BAR31, 0xffffffff); + ddb_out32(DDB_BAR41, 0xffffffff); + ddb_out32(DDB_BAR51, 0xffffffff); + ddb_out32(DDB_BARB1, 0xffffffff); + + /* + * We use pci master register 0 for memory space / config space + * And we use register 1 for IO space. + * Note that for memory space, we bump up the pci base address + * so that we have 1:1 mapping between PCI memory and cpu physical. + * For PCI IO space, it starts from 0 in PCI IO space but with + * DDB_xx_IO_BASE in CPU physical address space. + */ + ddb_set_pmr(DDB_PCIINIT00, DDB_PCICMD_MEM, DDB_PCI0_MEM_BASE, + DDB_PCI_ACCESS_32); + ddb_set_pmr(DDB_PCIINIT10, DDB_PCICMD_IO, 0, DDB_PCI_ACCESS_32); + + ddb_set_pmr(DDB_PCIINIT01, DDB_PCICMD_MEM, DDB_PCI1_MEM_BASE, + DDB_PCI_ACCESS_32); + ddb_set_pmr(DDB_PCIINIT11, DDB_PCICMD_IO, DDB_PCI0_IO_SIZE, + DDB_PCI_ACCESS_32); + + + /* PCI cross window should be set properly */ + ddb_set_pdar(DDB_BARP00, DDB_PCI1_MEM_BASE, DDB_PCI1_MEM_SIZE, 32, 0, 1); + ddb_set_pdar(DDB_BARP10, DDB_PCI1_IO_BASE, DDB_PCI1_IO_SIZE, 32, 0, 1); + ddb_set_pdar(DDB_BARP01, DDB_PCI0_MEM_BASE, DDB_PCI0_MEM_SIZE, 32, 0, 1); + ddb_set_pdar(DDB_BARP11, DDB_PCI0_IO_BASE, DDB_PCI0_IO_SIZE, 32, 0, 1); + + /* enable USB input buffers */ + ddb_out32(DDB_PIBMISC, 0x00000007); + + /* For dual-function pins, make them all non-GPIO */ + ddb_out32(DDB_GIUFUNSEL, 0x0); + // ddb_out32(DDB_GIUFUNSEL, 0xfe0fcfff); /* NEC recommanded value */ +} |