diff options
Diffstat (limited to 'arch')
26 files changed, 3402 insertions, 2 deletions
diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 23a56b044..cfcc8ab64 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -218,6 +218,17 @@ LOADADDR += 0x80100000 endif # +# ITE 8172 eval board with QED 5231 CPU +# +ifdef CONFIG_MIPS_ITE8172 +LIBS += arch/mips/ite-boards/qed-4n-s01b/ite.o \ + arch/mips/ite-boards/generic/it8172.o +SUBDIRS += arch/mips/ite-boards/generic \ + arch/mips/ite-boards/qed-4n-s01b +LOADADDR += 0x80100000 +endif + +# # Choosing incompatible machines durings configuration will result in # error messages during linking. Select a default linkscript if # none has been choosen above. diff --git a/arch/mips/config.in b/arch/mips/config.in index 6a349f691..5b98968a0 100644 --- a/arch/mips/config.in +++ b/arch/mips/config.in @@ -38,6 +38,26 @@ bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476 bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700 bool 'Support for SGI IP22' CONFIG_SGI_IP22 bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI +bool 'Support for ITE 8172G board' CONFIG_MIPS_ITE8172 + if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then + bool ' Support for older IT8172 (Rev C)' CONFIG_IT8172_REVC + bool ' Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD + if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then + define_bool CONFIG_IT8172_CIR y + else + bool ' Enable PS2 Keyboard Support ' CONFIG_PC_KEYB + fi + bool ' Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 + bool ' Enable Smart Card Reader 1 Support ' CONFIG_IT8172_SCR1 + fi + bool 'Support for Globespan IVR board' CONFIG_MIPS_IVR + if [ "$CONFIG_MIPS_IVR" = "y" ]; then + bool ' Enable Qtronix 990P Keyboard Support' CONFIG_QTRONIX_KEYBOARD + if [ "$CONFIG_QTRONIX_KEYBOARD" = "y" ]; then + define_bool CONFIG_IT8172_CIR y + fi + bool ' Enable Smart Card Reader 0 Support ' CONFIG_IT8172_SCR0 + fi # # Select some configuration options automatically for certain systems. @@ -126,6 +146,14 @@ if [ "$CONFIG_DDB5074" = "y" -o "$CONFIG_DDB5476" = "y" ]; then define_bool CONFIG_PC_KEYB y define_bool CONFIG_ROTTEN_IRQ y fi +if [ "$CONFIG_MIPS_ITE8172" = "y" ]; then + define_bool CONFIG_PCI y + define_bool CONFIG_IT8712 y + define_bool CONFIG_PC_KEYB y +fi +if [ "$CONFIG_MIPS_IVR" = "y" ]; then + define_bool CONFIG_PCI y +fi if [ "$CONFIG_ISA" != "y" ]; then define_bool CONFIG_ISA n diff --git a/arch/mips/defconfig-it8172 b/arch/mips/defconfig-it8172 new file mode 100644 index 000000000..3fef74c3f --- /dev/null +++ b/arch/mips/defconfig-it8172 @@ -0,0 +1,566 @@ +# +# Automatically generated make config: don't edit +# +CONFIG_MIPS=y +# CONFIG_SMP is not set + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y + +# +# Machine selection +# +# CONFIG_ACER_PICA_61 is not set +# CONFIG_ALGOR_P4032 is not set +# CONFIG_BAGET_MIPS is not set +# CONFIG_DECSTATION is not set +# CONFIG_DDB5074 is not set +# CONFIG_MIPS_EV96100 is not set +# CONFIG_MIPS_EV64120 is not set +# CONFIG_MIPS_ATLAS is not set +# CONFIG_MIPS_MALTA is not set +# CONFIG_MIPS_MAGNUM_4000 is not set +# CONFIG_MOMENCO_OCELOT is not set +# CONFIG_DDB5476 is not set +# CONFIG_OLIVETTI_M700 is not set +# CONFIG_SGI_IP22 is not set +# CONFIG_SNI_RM200_PCI is not set +CONFIG_MIPS_ITE8172=y +# CONFIG_IT8172_REVC is not set +CONFIG_QTRONIX_KEYBOARD=y +CONFIG_IT8172_CIR=y +# CONFIG_IT8172_SCR0 is not set +# CONFIG_IT8172_SCR1 is not set +# CONFIG_MIPS_IVR is not set +# CONFIG_MCA is not set +# CONFIG_SBUS is not set +CONFIG_PCI=y +CONFIG_IT8712=y +CONFIG_PC_KEYB=y +# CONFIG_ISA is not set +# CONFIG_EISA is not set +# CONFIG_I8259 is not set + +# +# Loadable module support +# +CONFIG_MODULES=y +# CONFIG_MODVERSIONS is not set +# CONFIG_KMOD is not set + +# +# CPU selection +# +# CONFIG_CPU_R3000 is not set +# CONFIG_CPU_R6000 is not set +# CONFIG_CPU_R4300 is not set +# CONFIG_CPU_R4X00 is not set +# CONFIG_CPU_R5000 is not set +# CONFIG_CPU_R5432 is not set +# CONFIG_CPU_RM7000 is not set +CONFIG_CPU_NEVADA=y +# CONFIG_CPU_R8000 is not set +# CONFIG_CPU_R10000 is not set +# CONFIG_CPU_MIPS32 is not set +# CONFIG_CPU_ADVANCED is not set +CONFIG_CPU_HAS_LLSC=y +# CONFIG_CPU_HAS_WB is not set + +# +# General setup +# +CONFIG_CPU_LITTLE_ENDIAN=y +CONFIG_MIPS_FPU_EMULATOR=y +CONFIG_KCORE_ELF=y +CONFIG_ELF_KERNEL=y +# CONFIG_BINFMT_AOUT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_NET=y +CONFIG_PCI_NAMES=y +CONFIG_SYSVIPC=y +CONFIG_BSD_PROCESS_ACCT=y +CONFIG_SYSCTL=y + +# +# Parallel port support +# +# CONFIG_PARPORT is not set +# CONFIG_PCMCIA is not set + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC1000 is not set +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOCPROBE is not set + +# +# RAM/ROM Device Drivers +# +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_MTDRAM is not set + +# +# Linearly Mapped Flash Device Drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_CFI_INTELEXT=y +# CONFIG_MTD_CFI_AMDSTD is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_JEDEC is not set +CONFIG_MTD_PHYSMAP=y +CONFIG_MTD_PHYSMAP_START=8000000 +CONFIG_MTD_PHYSMAP_LEN=2000000 +CONFIG_MTD_PHYSMAP_BUSWIDTH=4 + +# +# Drivers for chip mappings +# +# CONFIG_MTD_MIXMEM is not set +# CONFIG_MTD_NORA is not set +# CONFIG_MTD_OCTAGON is not set +# CONFIG_MTD_PNC2000 is not set +# CONFIG_MTD_RPXLITE is not set +# CONFIG_MTD_VMAX is not set + +# +# User modules and translation layers for MTD devices +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLOCK is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_PARIDE is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_RAM is not set +# CONFIG_BLK_DEV_INITRD is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set +# CONFIG_BLK_DEV_MD is not set +# CONFIG_MD_LINEAR is not set +# CONFIG_MD_RAID0 is not set +# CONFIG_MD_RAID1 is not set +# CONFIG_MD_RAID5 is not set +# CONFIG_BLK_DEV_LVM is not set + +# +# Networking options +# +# CONFIG_PACKET is not set +# CONFIG_NETLINK is not set +# CONFIG_NETFILTER is not set +# CONFIG_FILTER is not set +# CONFIG_UNIX is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_PNP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_INET_ECN is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_IPV6 is not set +# CONFIG_KHTTPD is not set +# CONFIG_ATM is not set + +# +# +# +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_DECNET is not set +# CONFIG_BRIDGE is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_LLC is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_FASTROUTE is not set +# CONFIG_NET_HW_FLOWCONTROL is not set + +# +# QoS and/or fair queueing +# +# CONFIG_NET_SCHED is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set +# CONFIG_PHONE_IXJ is not set + +# +# ATA/IDE/MFM/RLL support +# +CONFIG_IDE=y + +# +# IDE, ATA and ATAPI Block devices +# +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_HD_IDE is not set +# CONFIG_BLK_DEV_HD is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDEDISK_VENDOR is not set +# CONFIG_BLK_DEV_IDEDISK_FUJITSU is not set +# CONFIG_BLK_DEV_IDEDISK_IBM is not set +# CONFIG_BLK_DEV_IDEDISK_MAXTOR is not set +# CONFIG_BLK_DEV_IDEDISK_QUANTUM is not set +# CONFIG_BLK_DEV_IDEDISK_SEAGATE is not set +# CONFIG_BLK_DEV_IDEDISK_WD is not set +# CONFIG_BLK_DEV_COMMERIAL is not set +# CONFIG_BLK_DEV_TIVO is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_CMD640_ENHANCED is not set +# CONFIG_BLK_DEV_ISAPNP is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_OFFBOARD is not set +CONFIG_IDEDMA_PCI_AUTO=y +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_PCI_WIP is not set +# CONFIG_IDEDMA_NEW_DRIVE_LISTINGS is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_AEC62XX_TUNING is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_WDC_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD7409 is not set +# CONFIG_AMD7409_OVERRIDE is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_HPT34X_AUTODMA is not set +# CONFIG_BLK_DEV_HPT366 is not set +CONFIG_BLK_DEV_IT8172=y +CONFIG_IT8172_TUNING=y +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_PDC202XX is not set +# CONFIG_PDC202XX_BURST is not set +# CONFIG_BLK_DEV_OSB4 is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +CONFIG_IDE_CHIPSETS=y + +# +# Note: most of these also require special kernel boot parameters +# +# CONFIG_BLK_DEV_4DRIVES is not set +# CONFIG_BLK_DEV_ALI14XX is not set +# CONFIG_BLK_DEV_DTC2278 is not set +# CONFIG_BLK_DEV_HT6560B is not set +# CONFIG_BLK_DEV_PDC4030 is not set +# CONFIG_BLK_DEV_QD6580 is not set +# CONFIG_BLK_DEV_UMC8672 is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_IDEDMA_IVB is not set +# CONFIG_DMA_NONPCI is not set +CONFIG_BLK_DEV_IDE_MODES=y + +# +# SCSI support +# +# CONFIG_SCSI is not set + +# +# I2O device support +# +# CONFIG_I2O is not set +# CONFIG_I2O_PCI is not set +# CONFIG_I2O_BLOCK is not set +# CONFIG_I2O_LAN is not set +# CONFIG_I2O_SCSI is not set +# CONFIG_I2O_PROC is not set + +# +# Network device support +# +CONFIG_NETDEVICES=y + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_NET_SB1000 is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_APRICOT is not set +# CONFIG_CS89x0 is not set +CONFIG_TULIP=y +# CONFIG_DE4X5 is not set +# CONFIG_DGRS is not set +# CONFIG_DM9102 is not set +# CONFIG_EEPRO100 is not set +# CONFIG_EEPRO100_PM is not set +# CONFIG_LNE390 is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_NE3210 is not set +# CONFIG_ES3210 is not set +CONFIG_8139TOO=y +# CONFIG_RTL8129 is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_WINBOND_840 is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_LAN_SAA9730 is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_SK98LIN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set + +# +# Wireless LAN (non-hamradio) +# +# CONFIG_NET_RADIO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set +# CONFIG_NET_FC is not set +# CONFIG_RCPCI is not set +# CONFIG_SHAPER is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Character devices +# +# CONFIG_VT is not set +CONFIG_SERIAL=y +CONFIG_SERIAL_CONSOLE=y +# CONFIG_SERIAL_EXTENDED is not set +# CONFIG_SERIAL_NONSTANDARD is not set +# CONFIG_UNIX98_PTYS is not set + +# +# I2C support +# +# CONFIG_I2C is not set + +# +# Mice +# +# CONFIG_BUSMOUSE is not set +# CONFIG_MOUSE is not set + +# +# Joysticks +# +# CONFIG_JOYSTICK is not set + +# +# Input core support is needed for joysticks +# +# CONFIG_QIC02_TAPE is not set + +# +# Watchdog Cards +# +# CONFIG_WATCHDOG is not set +# CONFIG_INTEL_RNG is not set +# CONFIG_NVRAM is not set +# CONFIG_RTC is not set +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set + +# +# File systems +# +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_REISERFS_CHECK is not set +# CONFIG_ADFS_FS is not set +# CONFIG_ADFS_FS_RW is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_FAT_FS is not set +# CONFIG_MSDOS_FS is not set +# CONFIG_UMSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_RAMFS is not set +# CONFIG_ISO9660_FS is not set +# CONFIG_JOLIET is not set +# CONFIG_MINIX_FS is not set +# CONFIG_NTFS_FS is not set +# CONFIG_NTFS_RW is not set +# CONFIG_HPFS_FS is not set +CONFIG_PROC_FS=y +# CONFIG_DEVFS_FS is not set +# CONFIG_DEVFS_MOUNT is not set +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_QNX4FS_RW is not set +# CONFIG_ROMFS_FS is not set +CONFIG_EXT2_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_SYSV_FS_WRITE is not set +# CONFIG_UDF_FS is not set +# CONFIG_UDF_RW is not set +# CONFIG_UFS_FS is not set +# CONFIG_UFS_FS_WRITE is not set + +# +# Network File Systems +# +# CONFIG_CODA_FS is not set +CONFIG_NFS_FS=y +# CONFIG_NFS_V3 is not set +CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set +# CONFIG_NFSD_V3 is not set +CONFIG_SUNRPC=y +CONFIG_LOCKD=y +# CONFIG_SMB_FS is not set +# CONFIG_NCP_FS is not set +# CONFIG_NCPFS_PACKET_SIGNING is not set +# CONFIG_NCPFS_IOCTL_LOCKING is not set +# CONFIG_NCPFS_STRONG is not set +# CONFIG_NCPFS_NFS_NS is not set +# CONFIG_NCPFS_OS2_NS is not set +# CONFIG_NCPFS_SMALLDOS is not set +# CONFIG_NCPFS_NLS is not set +# CONFIG_NCPFS_EXTRAS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_SMB_NLS is not set +# CONFIG_NLS is not set + +# +# Sound +# +# CONFIG_SOUND is not set + +# +# USB support +# +# CONFIG_USB is not set + +# +# Input core support +# +# CONFIG_INPUT is not set + +# +# Kernel hacking +# +CONFIG_CROSSCOMPILE=y +# CONFIG_MIPS_FPE_MODULE is not set +# CONFIG_REMOTE_DEBUG is not set +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_MIPS_UNCACHED is not set diff --git a/arch/mips/ite-boards/generic/.cvsignore b/arch/mips/ite-boards/generic/.cvsignore new file mode 100644 index 000000000..857dd22e9 --- /dev/null +++ b/arch/mips/ite-boards/generic/.cvsignore @@ -0,0 +1,2 @@ +.depend +.*.flags diff --git a/arch/mips/ite-boards/generic/Makefile b/arch/mips/ite-boards/generic/Makefile new file mode 100644 index 000000000..71d61ead8 --- /dev/null +++ b/arch/mips/ite-boards/generic/Makefile @@ -0,0 +1,36 @@ +# +# Copyright 2000 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# ppopov@mvista.com or support@mvista.com +# +# Makefile for the ITE 8172 (qed-4n-s01b) board, generic files. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +.S.s: + $(CPP) $(CFLAGS) $< -o $*.s +.S.o: + $(CC) $(CFLAGS) -c $< -o $*.o + +all: it8172.o + +O_TARGET := it8172.o + +obj-y := it8172_rtc.o it8172_setup.o irq.o int-handler.o pmon_prom.o time.o lpc.o puts.o reset.o + +ifdef CONFIG_PCI +obj-y += it8172_pci.o +endif + +ifdef CONFIG_IT8172_CIR +obj-y += it8172_cir.o +endif + +ifdef CONFIG_REMOTE_DEBUG + obj-y += dbg_io.o +endif + +include $(TOPDIR)/Rules.make diff --git a/arch/mips/ite-boards/generic/dbg_io.c b/arch/mips/ite-boards/generic/dbg_io.c new file mode 100644 index 000000000..76b0c1f70 --- /dev/null +++ b/arch/mips/ite-boards/generic/dbg_io.c @@ -0,0 +1,127 @@ + +#include <linux/config.h> + +#ifdef CONFIG_REMOTE_DEBUG + +/* --- CONFIG --- */ + +/* we need uint32 uint8 */ +/* #include "types.h" */ +typedef unsigned char uint8; +typedef unsigned int uint32; + +/* --- END OF CONFIG --- */ + +#define UART16550_BAUD_2400 2400 +#define UART16550_BAUD_4800 4800 +#define UART16550_BAUD_9600 9600 +#define UART16550_BAUD_19200 19200 +#define UART16550_BAUD_38400 38400 +#define UART16550_BAUD_57600 57600 +#define UART16550_BAUD_115200 115200 + +#define UART16550_PARITY_NONE 0 +#define UART16550_PARITY_ODD 0x08 +#define UART16550_PARITY_EVEN 0x18 +#define UART16550_PARITY_MARK 0x28 +#define UART16550_PARITY_SPACE 0x38 + +#define UART16550_DATA_5BIT 0x0 +#define UART16550_DATA_6BIT 0x1 +#define UART16550_DATA_7BIT 0x2 +#define UART16550_DATA_8BIT 0x3 + +#define UART16550_STOP_1BIT 0x0 +#define UART16550_STOP_2BIT 0x4 + +/* ----------------------------------------------------- */ + +/* === CONFIG === */ + +/* [stevel] we use the IT8712 serial port for kgdb */ +#define DEBUG_BASE 0xB40003F8 /* 8712 serial port 1 base address */ +#define MAX_BAUD 115200 + +/* === END OF CONFIG === */ + +/* register offset */ +#define OFS_RCV_BUFFER 0 +#define OFS_TRANS_HOLD 0 +#define OFS_SEND_BUFFER 0 +#define OFS_INTR_ENABLE 1 +#define OFS_INTR_ID 2 +#define OFS_DATA_FORMAT 3 +#define OFS_LINE_CONTROL 3 +#define OFS_MODEM_CONTROL 4 +#define OFS_RS232_OUTPUT 4 +#define OFS_LINE_STATUS 5 +#define OFS_MODEM_STATUS 6 +#define OFS_RS232_INPUT 6 +#define OFS_SCRATCH_PAD 7 + +#define OFS_DIVISOR_LSB 0 +#define OFS_DIVISOR_MSB 1 + + +/* memory-mapped read/write of the port */ +#define UART16550_READ(y) (*((volatile uint8*)(DEBUG_BASE + y))) +#define UART16550_WRITE(y,z) ((*((volatile uint8*)(DEBUG_BASE + y))) = z) + +void debugInit(uint32 baud, uint8 data, uint8 parity, uint8 stop) +{ + /* disable interrupts */ + UART16550_WRITE(OFS_INTR_ENABLE, 0); + + /* set up buad rate */ + { + uint32 divisor; + + /* set DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x80); + + /* set divisor */ + divisor = MAX_BAUD / baud; + UART16550_WRITE(OFS_DIVISOR_LSB, divisor & 0xff); + UART16550_WRITE(OFS_DIVISOR_MSB, (divisor & 0xff00)>>8); + + /* clear DIAB bit */ + UART16550_WRITE(OFS_LINE_CONTROL, 0x0); + } + + /* set data format */ + UART16550_WRITE(OFS_DATA_FORMAT, data | parity | stop); +} + +static int remoteDebugInitialized = 0; + +uint8 getDebugChar(void) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(UART16550_BAUD_115200, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, + UART16550_STOP_1BIT); + } + + while((UART16550_READ(OFS_LINE_STATUS) & 0x1) == 0); + return UART16550_READ(OFS_RCV_BUFFER); +} + + +int putDebugChar(uint8 byte) +{ + if (!remoteDebugInitialized) { + remoteDebugInitialized = 1; + debugInit(UART16550_BAUD_115200, + UART16550_DATA_8BIT, + UART16550_PARITY_NONE, + UART16550_STOP_1BIT); + } + + while ((UART16550_READ(OFS_LINE_STATUS) &0x20) == 0); + UART16550_WRITE(OFS_SEND_BUFFER, byte); + return 1; +} + +#endif diff --git a/arch/mips/ite-boards/generic/int-handler.S b/arch/mips/ite-boards/generic/int-handler.S new file mode 100644 index 000000000..2997b7f3d --- /dev/null +++ b/arch/mips/ite-boards/generic/int-handler.S @@ -0,0 +1,61 @@ +#include <asm/asm.h> +#include <asm/mipsregs.h> +#include <asm/regdef.h> +#include <asm/stackframe.h> + + .text + .set macro + .set noat + .align 5 + +NESTED(it8172_IRQ, PT_SIZE, sp) + SAVE_ALL + CLI # Important: mark KERNEL mode ! + + /* We're working with 'reorder' set at this point. */ + /* + * Get pending interrupts + */ + + mfc0 t0,CP0_CAUSE # get pending interrupts + mfc0 t1,CP0_STATUS # get enabled interrupts + and t0,t1 # isolate allowed ones + + andi t0,0xff00 # isolate pending bits + beqz t0, 3f # spurious interrupt + + andi a0, t0, CAUSEF_IP7 + beq a0, zero, 1f + move a0, sp + jal mips_timer_interrupt + j ret_from_irq + nop + +1: + andi a0, t0, CAUSEF_IP2 # the only int we expect at this time + beq a0, zero, 3f + move a0,sp + jal it8172_hw0_irqdispatch + + mfc0 t0,CP0_STATUS # disable interrupts + ori t0,1 + xori t0,1 + mtc0 t0,CP0_STATUS + nop + nop + nop + + la a1, ret_from_irq + jr a1 + nop + +3: + move a0, sp + jal mips_spurious_interrupt + nop + la a1, ret_from_irq + jr a1 + nop + +END(it8172_IRQ) + diff --git a/arch/mips/ite-boards/generic/irq.c b/arch/mips/ite-boards/generic/irq.c new file mode 100644 index 000000000..4a10e0b47 --- /dev/null +++ b/arch/mips/ite-boards/generic/irq.c @@ -0,0 +1,539 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * ITE 8172G interrupt/setup routines. + * + * Copyright 2000,2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * Part of this file was derived from Carsten Langgaard's + * arch/mips/mips-boards/atlas/atlas_int.c. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/module.h> +#include <linux/signal.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/timex.h> +#include <linux/malloc.h> +#include <linux/random.h> +#include <linux/serial_reg.h> + +#include <asm/bitops.h> +#include <asm/bootinfo.h> +#include <asm/io.h> +#include <asm/mipsregs.h> +#include <asm/system.h> +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_int.h> +#include <asm/it8172/it8172_dbg.h> + +#undef DEBUG_IRQ +#ifdef DEBUG_IRQ +/* note: prints function name for you */ +#define DPRINTK(fmt, args...) printk("%s: " fmt, __FUNCTION__ , ## args) +#else +#define DPRINTK(fmt, args...) +#endif + +#ifdef CONFIG_REMOTE_DEBUG +extern void breakpoint(void); +#endif + +/* revisit */ +#define EXT_IRQ0_TO_IP 2 /* IP 2 */ +#define EXT_IRQ5_TO_IP 7 /* IP 7 */ + +extern void set_debug_traps(void); +extern void mips_timer_interrupt(int irq, struct pt_regs *regs); +extern asmlinkage void it8172_IRQ(void); +irq_cpustat_t irq_stat [NR_CPUS]; +unsigned int local_bh_count[NR_CPUS]; +unsigned int local_irq_count[NR_CPUS]; +unsigned long spurious_count = 0; +irq_desc_t irq_desc[NR_IRQS]; +irq_desc_t *irq_desc_base=&irq_desc[0]; + +struct it8172_intc_regs volatile *it8172_hw0_icregs + = (struct it8172_intc_regs volatile *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_INTC_BASE)); + +/* Function for careful CP0 interrupt mask access */ +static inline void modify_cp0_intmask(unsigned clr_mask, unsigned set_mask) +{ + unsigned long status = read_32bit_cp0_register(CP0_STATUS); + status &= ~((clr_mask & 0xFF) << 8); + status |= (set_mask & 0xFF) << 8; + write_32bit_cp0_register(CP0_STATUS, status); +} + +static inline void mask_irq(unsigned int irq_nr) +{ + modify_cp0_intmask(irq_nr, 0); +} + +static inline void unmask_irq(unsigned int irq_nr) +{ + modify_cp0_intmask(0, irq_nr); +} + +void disable_irq(unsigned int irq_nr) +{ + unsigned long flags; + + save_and_cli(flags); + mask_irq(irq_nr); + restore_flags(flags); +} + +void enable_irq(unsigned int irq_nr) +{ + unsigned long flags; + + save_and_cli(flags); + unmask_irq(irq_nr); + restore_flags(flags); +} + + +void disable_it8172_irq(unsigned int irq_nr) +{ + unsigned short mask; + + DPRINTK("disable_it8172_irq %d\n", irq_nr); + + if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) { + /* LPC interrupt */ + DPRINTK("disable, before lpc_mask %x\n", it8172_hw0_icregs->lpc_mask); + it8172_hw0_icregs->lpc_mask |= (1 << (irq_nr - IT8172_LPC_IRQ_BASE)); + DPRINTK("disable, after lpc_mask %x\n", it8172_hw0_icregs->lpc_mask); + } + else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) { + /* Local Bus interrupt */ + DPRINTK("before lb_mask %x\n", it8172_hw0_icregs->lb_mask); + it8172_hw0_icregs->lb_mask |= (1 << (irq_nr - IT8172_LB_IRQ_BASE)); + DPRINTK("after lb_mask %x\n", it8172_hw0_icregs->lb_mask); + } + else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) { + /* PCI and other interrupts */ + DPRINTK("before pci_mask %x\n", it8172_hw0_icregs->pci_mask); + it8172_hw0_icregs->pci_mask |= (1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE)); + DPRINTK("after pci_mask %x\n", it8172_hw0_icregs->pci_mask); + } + else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) { + /* NMI interrupts */ + DPRINTK("before nmi_mask %x\n", it8172_hw0_icregs->nmi_mask); + it8172_hw0_icregs->nmi_mask |= (1 << (irq_nr - IT8172_NMI_IRQ_BASE)); + DPRINTK("after nmi_mask %x\n", it8172_hw0_icregs->nmi_mask); + } + else { + panic("disable_it8172_irq: bad irq %d\n", irq_nr); + } +} + + +void enable_it8172_irq(unsigned int irq_nr) +{ + DPRINTK("enable_it8172_irq %d\n", irq_nr); + if ( (irq_nr >= IT8172_LPC_IRQ_BASE) && (irq_nr <= IT8172_SERIRQ_15)) { + /* LPC interrupt */ + DPRINTK("enable, before lpc_mask %x\n", it8172_hw0_icregs->lpc_mask); + it8172_hw0_icregs->lpc_mask &= ~(1 << (irq_nr - IT8172_LPC_IRQ_BASE)); + DPRINTK("enable, after lpc_mask %x\n", it8172_hw0_icregs->lpc_mask); + } + else if ( (irq_nr >= IT8172_LB_IRQ_BASE) && (irq_nr <= IT8172_IOCHK_IRQ)) { + /* Local Bus interrupt */ + DPRINTK("before lb_mask %x\n", it8172_hw0_icregs->lb_mask); + it8172_hw0_icregs->lb_mask &= ~(1 << (irq_nr - IT8172_LB_IRQ_BASE)); + DPRINTK("after lb_mask %x\n", it8172_hw0_icregs->lb_mask); + } + else if ( (irq_nr >= IT8172_PCI_DEV_IRQ_BASE) && (irq_nr <= IT8172_DMA_IRQ)) { + /* PCI and other interrupts */ + DPRINTK("before pci_mask %x\n", it8172_hw0_icregs->pci_mask); + it8172_hw0_icregs->pci_mask &= ~(1 << (irq_nr - IT8172_PCI_DEV_IRQ_BASE)); + DPRINTK("after pci_mask %x\n", it8172_hw0_icregs->pci_mask); + } + else if ( (irq_nr >= IT8172_NMI_IRQ_BASE) && (irq_nr <= IT8172_POWER_NMI_IRQ)) { + /* NMI interrupts */ + DPRINTK("before nmi_mask %x\n", it8172_hw0_icregs->nmi_mask); + it8172_hw0_icregs->nmi_mask &= ~(1 << (irq_nr - IT8172_NMI_IRQ_BASE)); + DPRINTK("after nmi_mask %x\n", it8172_hw0_icregs->nmi_mask); + } + else { + panic("enable_it8172_irq: bad irq %d\n", irq_nr); + } +} + +static unsigned int startup_ite_irq(unsigned int irq) +{ + enable_it8172_irq(irq); + return 0; +} + +#define shutdown_ite_irq disable_it8172_irq +#define mask_and_ack_ite_irq disable_it8172_irq + +static void end_ite_irq(unsigned int irq) +{ + if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) + enable_it8172_irq(irq); +} + +static struct hw_interrupt_type it8172_irq_type = { + "ITE8172", + startup_ite_irq, + shutdown_ite_irq, + enable_it8172_irq, + disable_it8172_irq, + mask_and_ack_ite_irq, + end_ite_irq, + NULL +}; + + +int get_irq_list(char *buf) +{ + int i, len = 0, j; + struct irqaction * action; + + len += sprintf(buf+len, " "); + for (j=0; j<smp_num_cpus; j++) + len += sprintf(buf+len, "CPU%d ",j); + *(char *)(buf+len++) = '\n'; + + for (i = 0 ; i < NR_IRQS ; i++) { + action = irq_desc[i].action; + if ( !action || !action->handler ) + continue; + len += sprintf(buf+len, "%3d: ", i); + len += sprintf(buf+len, "%10u ", kstat_irqs(i)); + if ( irq_desc[i].handler ) + len += sprintf(buf+len, " %s ", irq_desc[i].handler->typename ); + else + len += sprintf(buf+len, " None "); + len += sprintf(buf+len, " %s",action->name); + for (action=action->next; action; action = action->next) { + len += sprintf(buf+len, ", %s", action->name); + } + len += sprintf(buf+len, "\n"); + } + len += sprintf(buf+len, "BAD: %10lu\n", spurious_count); + return len; +} + +asmlinkage void do_IRQ(int irq, struct pt_regs *regs) +{ + struct irqaction *action; + int cpu; + + cpu = smp_processor_id(); + irq_enter(cpu, irq); + + kstat.irqs[cpu][irq]++; +#if 0 + if (irq_desc[irq].handler && irq_desc[irq].handler->ack) { + // printk("invoking ack handler\n"); + irq_desc[irq].handler->ack(irq); + } +#endif + + action = irq_desc[irq].action; + + if (action && action->handler) + { + //mask_irq(1<<irq); + //printk("action->handler %x\n", action->handler); + disable_it8172_irq(irq); + //if (!(action->flags & SA_INTERRUPT)) __sti(); /* reenable ints */ + do { + action->handler(irq, action->dev_id, regs); + action = action->next; + } while ( action ); + //__cli(); /* disable ints */ + if (irq_desc[irq].handler) + { + } + //unmask_irq(1<<irq); + enable_it8172_irq(irq); + } + else + { + spurious_count++; + printk("Unhandled interrupt %d, cause %x, disabled\n", + (unsigned)irq, (unsigned)regs->cp0_cause); + disable_it8172_irq(irq); + //disable_irq(1<<irq); + } + irq_exit(cpu, irq); +} + +int request_irq(unsigned int irq, void (*handler)(int, void *, struct pt_regs *), + unsigned long irqflags, const char * devname, void *dev_id) +{ + struct irqaction *old, **p, *action; + unsigned long flags; + + /* + * IP0 and IP1 are software interrupts. IP7 is typically the timer interrupt. + * + * The ITE QED-4N-S01B board has one single interrupt line going from + * the system controller to the CPU. It's connected to the CPU external + * irq pin 1, which is IP2. The interrupt numbers are listed in it8172_int.h; + * the ISA interrupts are numbered from 0 to 15, and the rest go from + * there. + */ + + //printk("request_irq: %d handler %x\n", irq, handler); + if (irq >= NR_IRQS) + return -EINVAL; + + if (!handler) + { + /* Free */ + for (p = &irq_desc[irq].action; (action = *p) != NULL; p = &action->next) + { + /* Found it - now free it */ + save_flags(flags); + cli(); + *p = action->next; + disable_it8172_irq(irq); + //disable_irq(1<<irq); + restore_flags(flags); + kfree(action); + return 0; + } + return -ENOENT; + } + + action = (struct irqaction *) + kmalloc(sizeof(struct irqaction), GFP_KERNEL); + if (!action) + return -ENOMEM; + memset(action, 0, sizeof(struct irqaction)); + + save_flags(flags); + cli(); + + action->handler = handler; + action->flags = irqflags; + action->mask = 0; + action->name = devname; + action->dev_id = dev_id; + action->next = NULL; + + p = &irq_desc[irq].action; + + if ((old = *p) != NULL) { + /* Can't share interrupts unless both agree to */ + if (!(old->flags & action->flags & SA_SHIRQ)) + return -EBUSY; + /* add new interrupt at end of irq queue */ + do { + p = &old->next; + old = *p; + } while (old); + } + *p = action; + enable_it8172_irq(irq); + restore_flags(flags); +#if 0 + printk("request_irq: status %x cause %x\n", + read_32bit_cp0_register(CP0_STATUS), read_32bit_cp0_register(CP0_CAUSE)); +#endif + return 0; +} + +void free_irq(unsigned int irq, void *dev_id) +{ + request_irq(irq, NULL, 0, NULL, dev_id); +} + +void enable_cpu_timer(void) +{ + enable_irq(1<<EXT_IRQ5_TO_IP); /* timer interrupt */ +} + +unsigned long probe_irq_on (void) +{ + return 0; +} + +int probe_irq_off (unsigned long irqs) +{ + return 0; +} + + +void __init init_IRQ(void) +{ + int i; + + memset(irq_desc, 0, sizeof(irq_desc)); + set_except_vector(0, it8172_IRQ); + + /* mask all interrupts */ + it8172_hw0_icregs->lb_mask = 0xffff; + it8172_hw0_icregs->lpc_mask = 0xffff; + it8172_hw0_icregs->pci_mask = 0xffff; + it8172_hw0_icregs->nmi_mask = 0xffff; + + /* make all interrupts level triggered */ + it8172_hw0_icregs->lb_trigger = 0; + it8172_hw0_icregs->lpc_trigger = 0; + it8172_hw0_icregs->pci_trigger = 0; + it8172_hw0_icregs->nmi_trigger = 0; + + /* active level setting */ + /* uart, keyboard, and mouse are active high */ + it8172_hw0_icregs->lpc_level = (0x10 | 0x2 | 0x1000); + it8172_hw0_icregs->lb_level |= 0x20; + + /* keyboard and mouse are edge triggered */ + it8172_hw0_icregs->lpc_trigger |= (0x2 | 0x1000); + + +#if 0 + // Enable this piece of code to make internal USB interrupt + // edge triggered. + it8172_hw0_icregs->pci_trigger |= + (1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE)); + it8172_hw0_icregs->pci_level &= + ~(1 << (IT8172_USB_IRQ - IT8172_PCI_DEV_IRQ_BASE)); +#endif + + for (i = 0; i <= IT8172_INT_END; i++) { + irq_desc[i].status = IRQ_DISABLED; + irq_desc[i].action = 0; + irq_desc[i].depth = 1; + irq_desc[i].handler = &it8172_irq_type; + } + + /* + * Enable external int line 2 + * All ITE interrupts are masked for now. + */ + enable_irq(1<<EXT_IRQ0_TO_IP); + //set_cp0_status(ST0_IM, IE_IRQ2); + +#ifdef CONFIG_REMOTE_DEBUG + /* If local serial I/O used for debug port, enter kgdb at once */ + puts("Waiting for kgdb to connect..."); + set_debug_traps(); + breakpoint(); +#endif +} + +void mips_spurious_interrupt(struct pt_regs *regs) +{ +#if 1 + return; +#else + unsigned long status, cause; + + printk("got spurious interrupt\n"); + status = read_32bit_cp0_register(CP0_STATUS); + cause = read_32bit_cp0_register(CP0_CAUSE); + printk("status %x cause %x\n", status, cause); + printk("epc %x badvaddr %x \n", regs->cp0_epc, regs->cp0_badvaddr); +// while(1); +#endif +} + +void it8172_hw0_irqdispatch(struct pt_regs *regs) +{ + int irq; + unsigned short intstatus, status; + + intstatus = it8172_hw0_icregs->intstatus; + if (intstatus & 0x8) { + panic("Got NMI interrupt\n"); + } + else if (intstatus & 0x4) { + /* PCI interrupt */ + irq = 0; + status = it8172_hw0_icregs->pci_req; + while (!(status & 0x1)) { + irq++; + status >>= 1; + } + irq += IT8172_PCI_DEV_IRQ_BASE; + //printk("pci int %d\n", irq); + } + else if (intstatus & 0x1) { + /* Local Bus interrupt */ + irq = 0; + status = it8172_hw0_icregs->lb_req; + while (!(status & 0x1)) { + irq++; + status >>= 1; + } + irq += IT8172_LB_IRQ_BASE; + //printk("lb int %d\n", irq); + } + else if (intstatus & 0x2) { + /* LPC interrupt */ + /* Since some lpc interrupts are edge triggered, + * we could lose an interrupt this way because + * we acknowledge all ints at onces. Revisit. + */ + status = it8172_hw0_icregs->lpc_req; + it8172_hw0_icregs->lpc_req = 0; /* acknowledge ints */ + irq = 0; + while (!(status & 0x1)) { + irq++; + status >>= 1; + } + irq += IT8172_LPC_IRQ_BASE; + //printk("LPC int %d\n", irq); + } + else { + return; + } + do_IRQ(irq, regs); +} + +void show_pending_irqs(void) +{ + fputs("intstatus: "); + put32(it8172_hw0_icregs->intstatus); + puts(""); + + fputs("pci_req: "); + put32(it8172_hw0_icregs->pci_req); + puts(""); + + fputs("lb_req: "); + put32(it8172_hw0_icregs->lb_req); + puts(""); + + fputs("lpc_req: "); + put32(it8172_hw0_icregs->lpc_req); + puts(""); +} diff --git a/arch/mips/ite-boards/generic/it8172_cir.c b/arch/mips/ite-boards/generic/it8172_cir.c new file mode 100644 index 000000000..a801e407d --- /dev/null +++ b/arch/mips/ite-boards/generic/it8172_cir.c @@ -0,0 +1,171 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * IT8172 Consumer IR port generic routines. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> + +#ifdef CONFIG_IT8172_CIR + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_cir.h> + + +volatile struct it8172_cir_regs *cir_regs[NUM_CIR_PORTS] = { + (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR0_BASE)), + (volatile struct it8172_cir_regs *)(KSEG1ADDR(IT8172_PCI_IO_BASE + IT_CIR1_BASE))}; + + +/* + * Initialize Consumer IR Port. + */ +int cir_port_init(struct cir_port *cir) +{ + int port = cir->port; + unsigned char data; + + /* set baud rate */ + cir_regs[port]->bdlr = cir->baud_rate & 0xff; + cir_regs[port]->bdhr = (cir->baud_rate >> 8) & 0xff; + + /* set receiver control register */ + cir_regs[port]->rcr = (CIR_SET_RDWOS(cir->rdwos) | CIR_SET_RXDCR(cir->rxdcr)); + + /* set carrier frequency register */ + cir_regs[port]->cfr = (CIR_SET_CF(cir->cfq) | CIR_SET_HS(cir->hcfs)); + + /* set fifo threshold */ + data = cir_regs[port]->mstcr & 0xf3; + data |= CIR_SET_FIFO_TL(cir->fifo_tl); + cir_regs[port]->mstcr = data; + + clear_fifo(cir); + enable_receiver(cir); + disable_rx_demodulation(cir); + + set_rx_active(cir); + int_enable(cir); + rx_int_enable(cir); + + return 0; +} + + +void clear_fifo(struct cir_port *cir) +{ + cir_regs[cir->port]->mstcr |= CIR_FIFO_CLEAR; +} + +void enable_receiver(struct cir_port *cir) +{ + cir_regs[cir->port]->rcr |= CIR_RXEN; +} + +void disable_receiver(struct cir_port *cir) +{ + cir_regs[cir->port]->rcr &= ~CIR_RXEN; +} + +void enable_rx_demodulation(struct cir_port *cir) +{ + cir_regs[cir->port]->rcr |= CIR_RXEND; +} + +void disable_rx_demodulation(struct cir_port *cir) +{ + cir_regs[cir->port]->rcr &= ~CIR_RXEND; +} + +void set_rx_active(struct cir_port *cir) +{ + cir_regs[cir->port]->rcr |= CIR_RXACT; +} + +void int_enable(struct cir_port *cir) +{ + cir_regs[cir->port]->ier |= CIR_IEC; +} + +void rx_int_enable(struct cir_port *cir) +{ + cir_regs[cir->port]->ier |= CIR_RDAIE; +} + +void dump_regs(struct cir_port *cir) +{ + printk("mstcr %x ier %x iir %x cfr %x rcr %x tcr %x tfsr %x rfsr %x\n", + cir_regs[cir->port]->mstcr, + cir_regs[cir->port]->ier, + cir_regs[cir->port]->iir, + cir_regs[cir->port]->cfr, + cir_regs[cir->port]->rcr, + cir_regs[cir->port]->tcr, + cir_regs[cir->port]->tfsr, + cir_regs[cir->port]->rfsr); + + while (cir_regs[cir->port]->iir & CIR_RDAI) { + printk("data %x\n", cir_regs[cir->port]->dr); + } +} + +void dump_reg_addr(struct cir_port *cir) +{ + printk("dr %x mstcr %x ier %x iir %x cfr %x rcr %x tcr %x bdlr %x bdhr %x tfsr %x rfsr %x\n", + (unsigned)&cir_regs[cir->port]->dr, + (unsigned)&cir_regs[cir->port]->mstcr, + (unsigned)&cir_regs[cir->port]->ier, + (unsigned)&cir_regs[cir->port]->iir, + (unsigned)&cir_regs[cir->port]->cfr, + (unsigned)&cir_regs[cir->port]->rcr, + (unsigned)&cir_regs[cir->port]->tcr, + (unsigned)&cir_regs[cir->port]->bdlr, + (unsigned)&cir_regs[cir->port]->bdhr, + (unsigned)&cir_regs[cir->port]->tfsr, + (unsigned)&cir_regs[cir->port]->rfsr); +} + +int cir_get_rx_count(struct cir_port *cir) +{ + return cir_regs[cir->port]->rfsr & CIR_RXFBC_MASK; +} + +char cir_read_data(struct cir_port *cir) +{ + return cir_regs[cir->port]->dr; +} + +char get_int_status(struct cir_port *cir) +{ + return cir_regs[cir->port]->iir; +} +#endif diff --git a/arch/mips/ite-boards/generic/it8172_pci.c b/arch/mips/ite-boards/generic/it8172_pci.c new file mode 100644 index 000000000..97eb6f1ee --- /dev/null +++ b/arch/mips/ite-boards/generic/it8172_pci.c @@ -0,0 +1,276 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * IT8172 system controller specific pci support. + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/config.h> + +#ifdef CONFIG_PCI + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_pci.h> + +#define PCI_ACCESS_READ 0 +#define PCI_ACCESS_WRITE 1 + +#undef DEBUG +#undef DEBUG_CONFIG_CYCLES + +static int +it8172_pcibios_config_access(unsigned char access_type, struct pci_dev *dev, + unsigned char where, u32 *data) +{ + /* + * config cycles are on 4 byte boundary only + */ + unsigned char bus = dev->bus->number; + unsigned char dev_fn = dev->devfn; + +#ifdef DEBUG_CONFIG_CYCLES + printk("it config: type %d dev %x bus %d dev_fn %x data %x\n", + access_type, dev, bus, dev_fn, *data); + +#endif + + /* Setup address */ + IT_WRITE(IT_CONFADDR, (bus << IT_BUSNUM_SHF) | + (dev_fn << IT_FUNCNUM_SHF) | (where & ~0x3)); + + + if (access_type == PCI_ACCESS_WRITE) { + IT_WRITE(IT_CONFDATA, *data); + } + else { + IT_READ(IT_CONFDATA, *data); + } + + /* + * Revisit: check for master or target abort. + */ + return 0; + + +} + + +/* + * We can't address 8 and 16 bit words directly. Instead we have to + * read/write a 32bit word and mask/modify the data we actually want. + */ +static int +it8172_pcibios_read_config_byte (struct pci_dev *dev, int where, u8 *val) +{ + u32 data = 0; + + if (it8172_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data)) + return -1; + + *val = (data >> ((where & 3) << 3)) & 0xff; +#ifdef DEBUG + printk("cfg read byte: bus %d dev_fn %x where %x: val %x\n", + dev->bus->number, dev->devfn, where, *val); +#endif + + return PCIBIOS_SUCCESSFUL; +} + + +static int +it8172_pcibios_read_config_word (struct pci_dev *dev, int where, u16 *val) +{ + u32 data = 0; + + if (where & 1) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (it8172_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data)) + return -1; + + *val = (data >> ((where & 3) << 3)) & 0xffff; +#ifdef DEBUG + printk("cfg read word: bus %d dev_fn %x where %x: val %x\n", + dev->bus->number, dev->devfn, where, *val); +#endif + + return PCIBIOS_SUCCESSFUL; +} + +static int +it8172_pcibios_read_config_dword (struct pci_dev *dev, int where, u32 *val) +{ + u32 data = 0; + + if (where & 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (it8172_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data)) + return -1; + + *val = data; +#ifdef DEBUG + printk("cfg read dword: bus %d dev_fn %x where %x: val %x\n", + dev->bus->number, dev->devfn, where, *val); +#endif + + return PCIBIOS_SUCCESSFUL; +} + + +static int +it8172_pcibios_write_config_byte (struct pci_dev *dev, int where, u8 val) +{ + u32 data = 0; + + if (it8172_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data)) + return -1; + + data = (data & ~(0xff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (it8172_pcibios_config_access(PCI_ACCESS_WRITE, dev, where, &data)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +static int +it8172_pcibios_write_config_word (struct pci_dev *dev, int where, u16 val) +{ + u32 data = 0; + + if (where & 1) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (it8172_pcibios_config_access(PCI_ACCESS_READ, dev, where, &data)) + return -1; + + data = (data & ~(0xffff << ((where & 3) << 3))) | + (val << ((where & 3) << 3)); + + if (it8172_pcibios_config_access(PCI_ACCESS_WRITE, dev, where, &data)) + return -1; + + + return PCIBIOS_SUCCESSFUL; +} + +static int +it8172_pcibios_write_config_dword(struct pci_dev *dev, int where, u32 val) +{ + if (where & 3) + return PCIBIOS_BAD_REGISTER_NUMBER; + + if (it8172_pcibios_config_access(PCI_ACCESS_WRITE, dev, where, &val)) + return -1; + + return PCIBIOS_SUCCESSFUL; +} + +struct pci_ops it8172_pci_ops = { + it8172_pcibios_read_config_byte, + it8172_pcibios_read_config_word, + it8172_pcibios_read_config_dword, + it8172_pcibios_write_config_byte, + it8172_pcibios_write_config_word, + it8172_pcibios_write_config_dword +}; + +void __init pcibios_init(void) +{ + + printk("PCI: Probing PCI hardware on host bus 0.\n"); + pci_scan_bus(0, &it8172_pci_ops, NULL); +} + +int __init +pcibios_enable_device(struct pci_dev *dev) +{ + u16 cmd, old_cmd; + int idx; + struct resource *r; + + pci_read_config_word(dev, PCI_COMMAND, &cmd); + old_cmd = cmd; + for(idx=0; idx<6; idx++) { + r = &dev->resource[idx]; + if (!r->start && r->end) { + printk(KERN_ERR "PCI: Device %s not available because of resource collisions\n", dev->slot_name); + return -EINVAL; + } + if (r->flags & IORESOURCE_IO) + cmd |= PCI_COMMAND_IO; + if (r->flags & IORESOURCE_MEM) + cmd |= PCI_COMMAND_MEMORY; + } + if (dev->resource[PCI_ROM_RESOURCE].start) + cmd |= PCI_COMMAND_MEMORY; + if (cmd != old_cmd) { + printk("PCI: Enabling device %s (%04x -> %04x)\n", dev->slot_name, old_cmd, cmd); + pci_write_config_word(dev, PCI_COMMAND, cmd); + } + return 0; +} + + +void __init +pcibios_align_resource(void *data, struct resource *res, unsigned long size) +{ + printk("pcibios_align_resource\n"); +} + +char * __init +pcibios_setup(char *str) +{ + /* Nothing to do for now. */ + + return str; +} + +void __init +pcibios_update_resource(struct pci_dev *dev, struct resource *root, + struct resource *res, int resource) +{ + unsigned long where, size; + u32 reg; + + where = PCI_BASE_ADDRESS_0 + (resource * 4); + size = res->end - res->start; + pci_read_config_dword(dev, where, ®); + reg = (reg & size) | (((u32)(res->start - root->start)) & ~size); + pci_write_config_dword(dev, where, reg); +} + +void __init pcibios_fixup_bus(struct pci_bus *b) +{ + printk("pcibios_fixup_bus\n"); +} +#endif /* CONFIG_PCI */ diff --git a/arch/mips/ite-boards/generic/it8172_rtc.c b/arch/mips/ite-boards/generic/it8172_rtc.c new file mode 100644 index 000000000..4ae1e7543 --- /dev/null +++ b/arch/mips/ite-boards/generic/it8172_rtc.c @@ -0,0 +1,63 @@ +/* + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * RTC routines for ITE8172 MC146818-compatible rtc chip. + * + */ +#include <asm/spinlock.h> +#include <linux/mc146818rtc.h> +#include <asm/it8172/it8172.h> + +#define IT8172_RTC_ADR_REG (IT8172_PCI_IO_BASE + IT_RTC_BASE) +#define IT8172_RTC_DAT_REG (IT8172_RTC_ADR_REG + 1) + +static volatile char *rtc_adr_reg = KSEG1ADDR((volatile char *)IT8172_RTC_ADR_REG); +static volatile char *rtc_dat_reg = KSEG1ADDR((volatile char *)IT8172_RTC_DAT_REG); + +unsigned char it8172_rtc_read_data(unsigned long addr) +{ + unsigned char retval; + + *rtc_adr_reg = addr; + retval = *rtc_dat_reg; + return retval; +} + +void it8172_rtc_write_data(unsigned char data, unsigned long addr) +{ + *rtc_adr_reg = addr; + *rtc_dat_reg = data; +} + +static int it8172_rtc_bcd_mode(void) +{ + return 0; +} + +struct rtc_ops it8172_rtc_ops = { + &it8172_rtc_read_data, + &it8172_rtc_write_data, + &it8172_rtc_bcd_mode +}; diff --git a/arch/mips/ite-boards/generic/it8172_setup.c b/arch/mips/ite-boards/generic/it8172_setup.c new file mode 100644 index 000000000..e111c71cc --- /dev/null +++ b/arch/mips/ite-boards/generic/it8172_setup.c @@ -0,0 +1,311 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * IT8172/QED5231 board setup. + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/config.h> +#include <linux/init.h> +#include <linux/sched.h> +#include <linux/ioport.h> +#include <linux/console.h> +#include <linux/mc146818rtc.h> +#include <linux/serial_reg.h> + +#include <asm/cpu.h> +#include <asm/bootinfo.h> +#include <asm/irq.h> +#include <asm/mipsregs.h> +#include <asm/reboot.h> +#include <asm/it8172/it8172.h> +#include <asm/it8712.h> +#ifdef CONFIG_PC_KEYB +#include <asm/keyboard.h> +#endif + +#if defined(CONFIG_SERIAL_CONSOLE) || defined(CONFIG_PROM_CONSOLE) +extern void console_setup(char *, int *); +char serial_console[20]; +#endif + +extern struct rtc_ops it8172_rtc_ops; +extern struct resource ioport_resource; +extern unsigned long mips_io_port_base; +#ifdef CONFIG_BLK_DEV_IDE +extern struct ide_ops std_ide_ops; +extern struct ide_ops *ide_ops; +#endif +#ifdef CONFIG_PC_KEYB +extern struct kbd_ops std_kbd_ops; +int init_8712_keyboard(void); +#endif + +extern int SearchIT8712(void); +extern void InitLPCInterface(void); +extern char * __init prom_getcmdline(void); +extern void it8172_restart(void); +extern void it8172_halt(void); +extern void it8172_power_off(void); + +#ifdef CONFIG_IT8172_REVC +struct { + struct resource ram; + struct resource pci_mem; + struct resource pci_io; + struct resource flash; + struct resource boot; +} it8172_resources = { + { "RAM", 0, 0, IORESOURCE_MEM }, /* to be initted */ + { "PCI Mem", 0x10000000, 0x13FFFFFF, IORESOURCE_MEM }, + { "PCI I/O", 0x14000000, 0x17FFFFFF }, + { "Flash", 0x08000000, 0x0CFFFFFF }, + { "Boot ROM", 0x1FC00000, 0x1FFFFFFF } +}; +#else +struct { + struct resource ram; + struct resource pci_mem0; + struct resource pci_mem1; + struct resource pci_io; + struct resource pci_mem2; + struct resource pci_mem3; + struct resource flash; + struct resource boot; +} it8172_resources = { + { "RAM", 0, 0, IORESOURCE_MEM }, /* to be initted */ + { "PCI Mem0", 0x0C000000, 0x0FFFFFFF, IORESOURCE_MEM }, + { "PCI Mem1", 0x10000000, 0x13FFFFFF, IORESOURCE_MEM }, + { "PCI I/O", 0x14000000, 0x17FFFFFF }, + { "PCI Mem2", 0x1A000000, 0x1BFFFFFF, IORESOURCE_MEM }, + { "PCI Mem3", 0x1C000000, 0x1FBFFFFF, IORESOURCE_MEM }, + { "Flash", 0x08000000, 0x0CFFFFFF }, + { "Boot ROM", 0x1FC00000, 0x1FFFFFFF } +}; +#endif + + +void __init it8172_init_ram_resource(unsigned long memsize) +{ + it8172_resources.ram.end = memsize; +} + +void __init it8172_setup(void) +{ +#ifdef CONFIG_BLK_DEV_IT8172 + unsigned short dsr; +#endif + char *argptr; + + argptr = prom_getcmdline(); +#ifdef CONFIG_SERIAL_CONSOLE + if ((argptr = strstr(argptr, "console=ttyS0")) == NULL) { + strcpy(serial_console, "ttyS0,115200"); + console_setup(serial_console, NULL); + } +#endif + + set_cp0_status(ST0_FR,0); + rtc_ops = &it8172_rtc_ops; + + _machine_restart = it8172_restart; + _machine_halt = it8172_halt; + _machine_power_off = it8172_power_off; + + /* + * IO/MEM resources. + * + * revisit this area. + */ + mips_io_port_base = KSEG1; + ioport_resource.start = it8172_resources.pci_io.start; + ioport_resource.end = it8172_resources.pci_io.end; +#ifdef CONFIG_IT8172_REVC + iomem_resource.start = it8172_resources.pci_mem.start; + iomem_resource.end = it8172_resources.pci_mem.end; +#else + iomem_resource.start = it8172_resources.pci_mem0.start; + iomem_resource.end = it8172_resources.pci_mem3.end; +#endif + +#ifdef CONFIG_BLK_DEV_INITRD + ROOT_DEV = MKDEV(RAMDISK_MAJOR, 0); +#endif + +#ifdef CONFIG_BLK_DEV_IT8172 + /* + * Pull IDE device out of standby mode. + */ + IT_IO_READ16(IT_PM_DSR, dsr); + dsr &= ~IT_PM_DSR_IDESB; + IT_IO_WRITE16(IT_PM_DSR, dsr); + + ide_ops = &std_ide_ops; +#endif + +#ifdef CONFIG_FB + conswitchp = &dummy_con; +#endif + + InitLPCInterface(); + +#ifdef CONFIG_MIPS_ITE8172 + if (SearchIT8712()) { + printk("Found IT8712 Super IO\n"); + // enable IT8712 serial port + LPCSetConfig(LDN_SERIAL1, 0x30, 0x01); /* enable */ + LPCSetConfig(LDN_SERIAL1, 0x23, 0x01); /* clock selection */ +#ifdef CONFIG_PC_KEYB + if (init_8712_keyboard()) { + printk("Unable to initialize keyboard\n"); + LPCSetConfig(LDN_KEYBOARD, 0x30, 0x0); /* disable keyboard */ + } + else { + LPCSetConfig(LDN_KEYBOARD, 0x30, 0x1); /* enable keyboard */ + LPCSetConfig(LDN_KEYBOARD, 0xf0, 0x2); + LPCSetConfig(LDN_KEYBOARD, 0x71, 0x3); + + LPCSetConfig(LDN_MOUSE, 0x30, 0x1); /* enable mouse */ + + LPCSetConfig(0x4, 0x30, 0x1); + LPCSetConfig(0x4, 0xf4, LPCGetConfig(0x4, 0xf4) | 0x80); + + if ((LPCGetConfig(LDN_KEYBOARD, 0x30) == 0) || + (LPCGetConfig(LDN_MOUSE, 0x30) == 0)) + printk("Error: keyboard or mouse not enabled\n"); + + kbd_ops = &std_kbd_ops; + } +#endif + } + else { + printk("IT8712 Super IO not found\n"); + } +#endif + +#ifdef CONFIG_IT8172_CIR + { + unsigned long data; + //printk("Enabling CIR0\n"); + IT_IO_READ16(IT_PM_DSR, data); + data &= ~IT_PM_DSR_CIR0SB; + IT_IO_WRITE16(IT_PM_DSR, data); + //printk("DSR register: %x\n", (unsigned)IT_IO_READ16(IT_PM_DSR, data)); + } +#endif +#ifdef CONFIG_IT8172_SCR0 + { + unsigned i; + /* Enable Smart Card Reader 0 */ + /* First power it up */ + IT_IO_READ16(IT_PM_DSR, i); + i &= ~IT_PM_DSR_SCR0SB; + IT_IO_WRITE16(IT_PM_DSR, i); + /* Then initialize its registers */ + outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT + |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT + |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT + |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT + |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT), + IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SFR); + outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT, + IT8172_PCI_IO_BASE + IT_SCR0_BASE + IT_SCR_SCDR); + } +#endif /* CONFIG_IT8172_SCR0 */ +#ifdef CONFIG_IT8172_SCR1 + { + unsigned i; + /* Enable Smart Card Reader 1 */ + /* First power it up */ + IT_IO_READ16(IT_PM_DSR, i); + i &= ~IT_PM_DSR_SCR1SB; + IT_IO_WRITE16(IT_PM_DSR, i); + /* Then initialize its registers */ + outb(( IT_SCR_SFR_GATE_UART_OFF << IT_SCR_SFR_GATE_UART_BIT + |IT_SCR_SFR_FET_CHARGE_213_US << IT_SCR_SFR_FET_CHARGE_BIT + |IT_SCR_SFR_CARD_FREQ_3_5_MHZ << IT_SCR_SFR_CARD_FREQ_BIT + |IT_SCR_SFR_FET_ACTIVE_INVERT << IT_SCR_SFR_FET_ACTIVE_BIT + |IT_SCR_SFR_ENABLE_ON << IT_SCR_SFR_ENABLE_BIT), + IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SFR); + outb(IT_SCR_SCDR_RESET_MODE_ASYNC << IT_SCR_SCDR_RESET_MODE_BIT, + IT8172_PCI_IO_BASE + IT_SCR1_BASE + IT_SCR_SCDR); + } +#endif /* CONFIG_IT8172_SCR1 */ +} + + +#ifdef CONFIG_PC_KEYB +/* + * According to the ITE Special BIOS Note for waking up the + * keyboard controller... + */ +int init_8712_keyboard() +{ + unsigned int cmd_port = 0x14000064; + unsigned int data_port = 0x14000060; + unsigned char data; + int i; + + printk("8712 keyboard init"); + + outb(0xaa, cmd_port); /* send self-test cmd */ + i = 0; + while (!(inb(cmd_port) & 0x1)) { /* wait output buffer full */ + i++; + if (i > 0xffffff) + return 1; + } + + data = inb(data_port); + outb(0xcb, cmd_port); /* set ps2 mode */ + while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ + i++; + if (i > 0xffffff) + return 1; + } + outb(0x01, data_port); + while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ + i++; + if (i > 0xffffff) + return 1; + } + + outb(0x60, cmd_port); /* write 8042 command byte */ + while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ + i++; + if (i > 0xffffff) + return 1; + } + outb(0x45, data_port); /* at interface, keyboard enabled, system flag */ + while (inb(cmd_port) & 0x2) { /* wait while input buffer full */ + i++; + if (i > 0xffffff) + return 1; + } + + outb(0xae, cmd_port); /* enable interface */ + return 0; +} +#endif diff --git a/arch/mips/ite-boards/generic/lpc.c b/arch/mips/ite-boards/generic/lpc.c new file mode 100644 index 000000000..0887c6354 --- /dev/null +++ b/arch/mips/ite-boards/generic/lpc.c @@ -0,0 +1,144 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * ITE Semi IT8712 Super I/O functions. + * + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <asm/io.h> +#include <asm/types.h> +#include <asm/it8712.h> +#include <asm/it8172/it8172.h> + +#ifndef TRUE +#define TRUE 1 +#endif + +#ifndef FALSE +#define FALSE 0 +#endif + +void LPCEnterMBPnP() +{ + int i; + unsigned char key[4] = {0x87, 0x01, 0x55, 0x55}; + + for (i = 0; i<4; i++) + outb(key[i], LPC_KEY_ADDR); + +} + +void LPCExitMBPnP() +{ + outb(0x02, LPC_KEY_ADDR); + outb(0x02, LPC_DATA_ADDR); +} + +void LPCSetConfig(char LdnNumber, char Index, char data) +{ + LPCEnterMBPnP(); // Enter IT8712 MB PnP mode + outb(0x07, LPC_KEY_ADDR); + outb(LdnNumber, LPC_DATA_ADDR); + outb(Index, LPC_KEY_ADDR); + outb(data, LPC_DATA_ADDR); + LPCExitMBPnP(); +} + +char LPCGetConfig(char LdnNumber, char Index) +{ + char rtn; + + LPCEnterMBPnP(); // Enter IT8712 MB PnP mode + outb(0x07, LPC_KEY_ADDR); + outb(LdnNumber, LPC_DATA_ADDR); + outb(Index, LPC_KEY_ADDR); + rtn = inb(LPC_DATA_ADDR); + LPCExitMBPnP(); + return rtn; +} + +int SearchIT8712() +{ + unsigned char Id1, Id2; + unsigned short Id; + + LPCEnterMBPnP(); + outb(0x20, LPC_KEY_ADDR); /* chip id byte 1 */ + Id1 = inb(LPC_DATA_ADDR); + outb(0x21, LPC_KEY_ADDR); /* chip id byte 2 */ + Id2 = inb(LPC_DATA_ADDR); + Id = (Id1 << 8) | Id2; + LPCExitMBPnP(); + if (Id == 0x8712) + return TRUE; + else + return FALSE; +} + +void InitLPCInterface() +{ + unsigned char bus, dev_fn; + unsigned long data; + + bus = 0; + dev_fn = 1<<3 | 4; + + + /* pci cmd, SERR# Enable */ + IT_WRITE(IT_CONFADDR, + (bus << IT_BUSNUM_SHF) | + (dev_fn << IT_FUNCNUM_SHF) | + ((0x4 / 4) << IT_REGNUM_SHF)); + IT_READ(IT_CONFDATA, data); + data |= 0x0100; + IT_WRITE(IT_CONFADDR, + (bus << IT_BUSNUM_SHF) | + (dev_fn << IT_FUNCNUM_SHF) | + ((0x4 / 4) << IT_REGNUM_SHF)); + IT_WRITE(IT_CONFDATA, data); + + /* setup serial irq control register */ + IT_WRITE(IT_CONFADDR, + (bus << IT_BUSNUM_SHF) | + (dev_fn << IT_FUNCNUM_SHF) | + ((0x48 / 4) << IT_REGNUM_SHF)); + IT_READ(IT_CONFDATA, data); + data = (data & 0xffff00ff) | 0xc400; + IT_WRITE(IT_CONFADDR, + (bus << IT_BUSNUM_SHF) | + (dev_fn << IT_FUNCNUM_SHF) | + ((0x48 / 4) << IT_REGNUM_SHF)); + IT_WRITE(IT_CONFDATA, data); + + + /* Enable I/O Space Subtractive Decode */ + /* default 0x4C is 0x3f220000 */ + IT_WRITE(IT_CONFADDR, + (bus << IT_BUSNUM_SHF) | + (dev_fn << IT_FUNCNUM_SHF) | + ((0x4C / 4) << IT_REGNUM_SHF)); + IT_WRITE(IT_CONFDATA, 0x3f2200f3); +} diff --git a/arch/mips/ite-boards/generic/pmon_prom.c b/arch/mips/ite-boards/generic/pmon_prom.c new file mode 100644 index 000000000..695e68e5d --- /dev/null +++ b/arch/mips/ite-boards/generic/pmon_prom.c @@ -0,0 +1,139 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * PROM library initialisation code, assuming a version of + * pmon is the boot code. + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This file was derived from Carsten Langgaard's + * arch/mips/mips-boards/xx files. + * + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/config.h> +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/string.h> + +#include <asm/bootinfo.h> + +/* #define DEBUG_CMDLINE */ + +char arcs_cmdline[COMMAND_LINE_SIZE]; +int prom_argc; +char **prom_argv, **prom_envp; + +typedef struct +{ + char *name; +/* char *val; */ +}t_env_var; + + +char * __init prom_getcmdline(void) +{ + return &(arcs_cmdline[0]); +} + +void __init prom_init_cmdline(void) +{ + char *cp; + int actr; + + actr = 1; /* Always ignore argv[0] */ + + cp = &(arcs_cmdline[0]); + while(actr < prom_argc) { + strcpy(cp, prom_argv[actr]); + cp += strlen(prom_argv[actr]); + *cp++ = ' '; + actr++; + } + if (cp != &(arcs_cmdline[0])) /* get rid of trailing space */ + --cp; + *cp = '\0'; + +} + + +char *prom_getenv(char *envname) +{ + /* + * Return a pointer to the given environment variable. + * Environment variables are stored in the form of "memsize=64". + */ + + t_env_var *env = (t_env_var *)prom_envp; + int i; + + i = strlen(envname); + + while(env->name) { + if(strncmp(envname, env->name, i) == 0) { + return(env->name + strlen(envname) + 1); + } + env++; + } + return(NULL); +} + +static inline unsigned char str2hexnum(unsigned char c) +{ + if(c >= '0' && c <= '9') + return c - '0'; + if(c >= 'a' && c <= 'f') + return c - 'a' + 10; + return 0; /* foo */ +} + +int __init page_is_ram(unsigned long pagenr) +{ + return 1; +} + +void prom_free_prom_memory (void) +{ +} + +unsigned long __init prom_get_memsize(void) +{ + char *memsize_str; + unsigned int memsize; + + memsize_str = prom_getenv("memsize"); + if (!memsize_str) { + printk("memsize unknown: setting to 32MB\n"); + memsize = 32; + } else { +#ifdef DEBUG + printk("prom_memsize: %s\n", memsize_str); +#endif + memsize = simple_strtol(memsize_str, NULL, 0); + } + return memsize; +} diff --git a/arch/mips/ite-boards/generic/puts.c b/arch/mips/ite-boards/generic/puts.c new file mode 100644 index 000000000..4ff7ebffc --- /dev/null +++ b/arch/mips/ite-boards/generic/puts.c @@ -0,0 +1,144 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Low level uart routines to directly access a 16550 uart. + * + * Copyright 2000,2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/types.h> + +#define SERIAL_BASE 0xB4011800 /* it8172 */ +#define SER_CMD 5 +#define SER_DATA 0x00 +#define TX_BUSY 0x20 + +#define TIMEOUT 0xffff +#undef SLOW_DOWN + +static const char digits[16] = "0123456789abcdef"; +static volatile unsigned char * const com1 = (unsigned char *)SERIAL_BASE; + + +#ifdef SLOW_DOWN +static inline void slow_down() +{ + int k; + for (k=0; k<10000; k++); +} +#else +#define slow_down() +#endif + +void +putch(const unsigned char c) +{ + unsigned char ch; + int i = 0; + + do { + ch = com1[SER_CMD]; + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (0 == (ch & TX_BUSY)); + com1[SER_DATA] = c; +} + +void +puts(unsigned char *cp) +{ + unsigned char ch; + int i = 0; + + while (*cp) { + do { + ch = com1[SER_CMD]; + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (0 == (ch & TX_BUSY)); + com1[SER_DATA] = *cp++; + } + putch('\r'); + putch('\n'); +} + +void +fputs(unsigned char *cp) +{ + unsigned char ch; + int i = 0; + + while (*cp) { + + do { + ch = com1[SER_CMD]; + slow_down(); + i++; + if (i>TIMEOUT) { + break; + } + } while (0 == (ch & TX_BUSY)); + com1[SER_DATA] = *cp++; + } +} + + +void +put64(uint64_t ul) +{ + int cnt; + unsigned ch; + + cnt = 16; /* 16 nibbles in a 64 bit long */ + putch('0'); + putch('x'); + do { + cnt--; + ch = (unsigned char)(ul >> cnt * 4) & 0x0F; + putch(digits[ch]); + } while (cnt > 0); +} + +void +put32(unsigned u) +{ + int cnt; + unsigned ch; + + cnt = 8; /* 8 nibbles in a 32 bit long */ + putch('0'); + putch('x'); + do { + cnt--; + ch = (unsigned char)(u >> cnt * 4) & 0x0F; + putch(digits[ch]); + } while (cnt > 0); +} diff --git a/arch/mips/ite-boards/generic/reset.c b/arch/mips/ite-boards/generic/reset.c new file mode 100644 index 000000000..22bcf79ff --- /dev/null +++ b/arch/mips/ite-boards/generic/reset.c @@ -0,0 +1,61 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * ITE 8172 reset routines. + * + * Copyright (C) 1997, 2001 Ralf Baechle + * Copyright 2001 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/sched.h> +#include <linux/mm.h> +#include <asm/io.h> +#include <asm/pgtable.h> +#include <asm/processor.h> +#include <asm/reboot.h> +#include <asm/system.h> + +void it8172_restart(char *command) +{ + set_cp0_status((ST0_BEV | ST0_ERL), (ST0_BEV | ST0_ERL)); + set_cp0_config(CONF_CM_CMASK, CONF_CM_UNCACHED); + flush_cache_all(); + write_32bit_cp0_register(CP0_WIRED, 0); + __asm__ __volatile__("jr\t%0"::"r"(0xbfc00000)); +} + +void it8172_halt(void) +{ + printk(KERN_NOTICE "\n** You can safely turn off the power\n"); + while (1) + __asm__(".set\tmips3\n\t" + "wait\n\t" + ".set\tmips0"); +} + +void it8172_power_off(void) +{ + it8172_halt(); +} diff --git a/arch/mips/ite-boards/generic/time.c b/arch/mips/ite-boards/generic/time.c new file mode 100644 index 000000000..fc294490b --- /dev/null +++ b/arch/mips/ite-boards/generic/time.c @@ -0,0 +1,379 @@ +/* + * Carsten Langgaard, carstenl@mips.com + * Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved. + * + * ######################################################################## + * + * This program is free software; you can distribute it and/or modify it + * under the terms of the GNU General Public License (Version 2) as + * published by the Free Software Foundation. + * + * This program is distributed in the hope it will be useful, but WITHOUT + * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or + * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License + * for more details. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 59 Temple Place - Suite 330, Boston MA 02111-1307, USA. + * + * ######################################################################## + * + * Setting up the clock on the MIPS boards. + * + */ + +#include <linux/config.h> +#include <linux/init.h> +#include <linux/kernel_stat.h> +#include <linux/sched.h> +#include <linux/spinlock.h> + +#include <asm/mipsregs.h> +#include <asm/ptrace.h> +#include <asm/it8172/it8172_int.h> + +#include <linux/mc146818rtc.h> +#include <linux/timex.h> + +extern void enable_cpu_timer(void); +extern volatile unsigned long wall_jiffies; +extern rwlock_t xtime_lock; + +unsigned long missed_heart_beats = 0; +static long last_rtc_update = 0; +static unsigned long r4k_offset; /* Amount to increment compare reg each time */ +static unsigned long r4k_cur; /* What counter should be at next timer irq */ +static unsigned int timer_tick_count=0; + +static inline void ack_r4ktimer(unsigned long newval) +{ + write_32bit_cp0_register(CP0_COMPARE, newval); +} + + +/* + * In order to set the CMOS clock precisely, set_rtc_mmss has to be + * called 500 ms after the second nowtime has started, because when + * nowtime is written into the registers of the CMOS clock, it will + * jump to the next second precisely 500 ms later. Check the Motorola + * MC146818A or Dallas DS12887 data sheet for details. + * + * BUG: This routine does not handle hour overflow properly; it just + * sets the minutes. Usually you won't notice until after reboot! + */ +static int set_rtc_mmss(unsigned long nowtime) +{ + int retval = 0; + int real_seconds, real_minutes, cmos_minutes; + unsigned char save_control, save_freq_select; + + save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ + CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); + + save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ + CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); + + cmos_minutes = CMOS_READ(RTC_MINUTES); + + /* + * since we're only adjusting minutes and seconds, + * don't interfere with hour overflow. This avoids + * messing with unknown time zones but requires your + * RTC not to be off by more than 15 minutes + */ + real_seconds = nowtime % 60; + real_minutes = nowtime / 60; + if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) + real_minutes += 30; /* correct for half hour time zone */ + real_minutes %= 60; + + if (abs(real_minutes - cmos_minutes) < 30) { + CMOS_WRITE(real_seconds,RTC_SECONDS); + CMOS_WRITE(real_minutes,RTC_MINUTES); + } else { + printk(KERN_WARNING + "set_rtc_mmss: can't update from %d to %d\n", + cmos_minutes, real_minutes); + retval = -1; + } + + /* The following flags have to be released exactly in this order, + * otherwise the DS12887 (popular MC146818A clone with integrated + * battery and quartz) will not reset the oscillator and will not + * update precisely 500 ms later. You won't find this mentioned in + * the Dallas Semiconductor data sheets, but who believes data + * sheets anyway ... -- Markus Kuhn + */ + CMOS_WRITE(save_control, RTC_CONTROL); + CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); + + return retval; +} + + +/* + * There are a lot of conceptually broken versions of the MIPS timer interrupt + * handler floating around. This one is rather different, but the algorithm + * is provably more robust. + */ +void mips_timer_interrupt(struct pt_regs *regs) +{ + if (r4k_offset == 0) + goto null; + + do { + kstat.irqs[0][MIPS_CPU_TIMER_IRQ]++; + do_timer(regs); + + /* Historical comment/code: + * RTC time of day s updated approx. every 11 + * minutes. Because of how the numbers work out + * we need to make absolutely sure we do this update + * within 500ms before the * next second starts, + * thus the following code. + */ + read_lock(&xtime_lock); + if ((time_status & STA_UNSYNC) == 0 + && xtime.tv_sec > last_rtc_update + 660 + && xtime.tv_usec >= 500000 - (tick >> 1) + && xtime.tv_usec <= 500000 + (tick >> 1)) + if (set_rtc_mmss(xtime.tv_sec) == 0) + last_rtc_update = xtime.tv_sec; + else { + /* do it again in 60 s */ + last_rtc_update = xtime.tv_sec - 600; + } + read_unlock(&xtime_lock); + + r4k_cur += r4k_offset; + ack_r4ktimer(r4k_cur); + + } while (((unsigned long)read_32bit_cp0_register(CP0_COUNT) + - r4k_cur) < 0x7fffffff); + + return; + +null: + ack_r4ktimer(0); +} + +/* + * Figure out the r4k offset, the amount to increment the compare + * register for each time tick. + * Use the RTC to calculate offset. + */ +static unsigned long __init cal_r4koff(void) +{ + unsigned long count; + unsigned int flags; + + __save_and_cli(flags); + + /* Start counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + /* Start r4k counter. */ + write_32bit_cp0_register(CP0_COUNT, 0); + + /* Read counter exactly on falling edge of update flag */ + while (CMOS_READ(RTC_REG_A) & RTC_UIP); + while (!(CMOS_READ(RTC_REG_A) & RTC_UIP)); + + count = read_32bit_cp0_register(CP0_COUNT); + + /* restore interrupts */ + __restore_flags(flags); + + return (count / HZ); +} + +static unsigned long __init get_mips_time(void) +{ + unsigned int year, mon, day, hour, min, sec; + unsigned char save_control; + + save_control = CMOS_READ(RTC_CONTROL); + + /* Freeze it. */ + CMOS_WRITE(save_control | RTC_SET, RTC_CONTROL); + + /* Read regs. */ + sec = CMOS_READ(RTC_SECONDS); + min = CMOS_READ(RTC_MINUTES); + hour = CMOS_READ(RTC_HOURS); + + if (!(save_control & RTC_24H)) + { + if ((hour & 0xf) == 0xc) + hour &= 0x80; + if (hour & 0x80) + hour = (hour & 0xf) + 12; + } + day = CMOS_READ(RTC_DAY_OF_MONTH); + mon = CMOS_READ(RTC_MONTH); + year = CMOS_READ(RTC_YEAR); + + /* Unfreeze clock. */ + CMOS_WRITE(save_control, RTC_CONTROL); + + if ((year += 1900) < 1970) + year += 100; + + return mktime(year, mon, day, hour, min, sec); +} + +void __init time_init(void) +{ + unsigned int est_freq, flags; + + /* Set Data mode - binary. */ + CMOS_WRITE(CMOS_READ(RTC_CONTROL) | RTC_DM_BINARY, RTC_CONTROL); + + printk("calculating r4koff... "); + r4k_offset = cal_r4koff(); + printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset); + + est_freq = 2*r4k_offset*HZ; + est_freq += 5000; /* round */ + est_freq -= est_freq%10000; + printk("CPU frequency %d.%02d MHz\n", est_freq/1000000, + (est_freq%1000000)*100/1000000); + r4k_cur = (read_32bit_cp0_register(CP0_COUNT) + r4k_offset); + + write_32bit_cp0_register(CP0_COMPARE, r4k_cur); + + enable_cpu_timer(); + + /* Read time from the RTC chipset. */ + write_lock_irqsave (&xtime_lock, flags); + xtime.tv_sec = get_mips_time(); + xtime.tv_usec = 0; + write_unlock_irqrestore(&xtime_lock, flags); +} + +/* This is for machines which generate the exact clock. */ +#define USECS_PER_JIFFY (1000000/HZ) + +/* Cycle counter value at the previous timer interrupt.. */ + +static unsigned int timerhi = 0, timerlo = 0; + +/* + * FIXME: Does playing with the RP bit in c0_status interfere with this code? + */ +static unsigned long do_fast_gettimeoffset(void) +{ + u32 count; + unsigned long res, tmp; + + /* Last jiffy when do_fast_gettimeoffset() was called. */ + static unsigned long last_jiffies=0; + unsigned long quotient; + + /* + * Cached "1/(clocks per usec)*2^32" value. + * It has to be recalculated once each jiffy. + */ + static unsigned long cached_quotient=0; + + tmp = jiffies; + + quotient = cached_quotient; + + if (tmp && last_jiffies != tmp) { + last_jiffies = tmp; + __asm__(".set\tnoreorder\n\t" + ".set\tnoat\n\t" + ".set\tmips3\n\t" + "lwu\t%0,%2\n\t" + "dsll32\t$1,%1,0\n\t" + "or\t$1,$1,%0\n\t" + "ddivu\t$0,$1,%3\n\t" + "mflo\t$1\n\t" + "dsll32\t%0,%4,0\n\t" + "nop\n\t" + "ddivu\t$0,%0,$1\n\t" + "mflo\t%0\n\t" + ".set\tmips0\n\t" + ".set\tat\n\t" + ".set\treorder" + :"=&r" (quotient) + :"r" (timerhi), + "m" (timerlo), + "r" (tmp), + "r" (USECS_PER_JIFFY) + :"$1"); + cached_quotient = quotient; + } + + /* Get last timer tick in absolute kernel time */ + count = read_32bit_cp0_register(CP0_COUNT); + + /* .. relative to previous jiffy (32 bits is enough) */ + count -= timerlo; + + __asm__("multu\t%1,%2\n\t" + "mfhi\t%0" + :"=r" (res) + :"r" (count), + "r" (quotient)); + + /* + * Due to possible jiffies inconsistencies, we need to check + * the result so that we'll get a timer that is monotonic. + */ + if (res >= USECS_PER_JIFFY) + res = USECS_PER_JIFFY-1; + + return res; +} + +void do_gettimeofday(struct timeval *tv) +{ + unsigned int flags; + + read_lock_irqsave (&xtime_lock, flags); + *tv = xtime; + tv->tv_usec += do_fast_gettimeoffset(); + + /* + * xtime is atomically updated in timer_bh. jiffies - wall_jiffies + * is nonzero if the timer bottom half hasnt executed yet. + */ + if (jiffies - wall_jiffies) + tv->tv_usec += USECS_PER_JIFFY; + + read_unlock_irqrestore (&xtime_lock, flags); + + if (tv->tv_usec >= 1000000) { + tv->tv_usec -= 1000000; + tv->tv_sec++; + } +} + +void do_settimeofday(struct timeval *tv) +{ + write_lock_irq (&xtime_lock); + + /* This is revolting. We need to set the xtime.tv_usec correctly. + * However, the value in this location is is value at the last tick. + * Discover what correction gettimeofday would have done, and then + * undo it! + */ + tv->tv_usec -= do_fast_gettimeoffset(); + + if (tv->tv_usec < 0) { + tv->tv_usec += 1000000; + tv->tv_sec--; + } + + xtime = *tv; + time_adjust = 0; /* stop active adjtime() */ + time_status |= STA_UNSYNC; + time_maxerror = NTP_PHASE_LIMIT; + time_esterror = NTP_PHASE_LIMIT; + + write_unlock_irq (&xtime_lock); +} diff --git a/arch/mips/ite-boards/qed-4n-s01b/.cvsignore b/arch/mips/ite-boards/qed-4n-s01b/.cvsignore new file mode 100644 index 000000000..857dd22e9 --- /dev/null +++ b/arch/mips/ite-boards/qed-4n-s01b/.cvsignore @@ -0,0 +1,2 @@ +.depend +.*.flags diff --git a/arch/mips/ite-boards/qed-4n-s01b/Makefile b/arch/mips/ite-boards/qed-4n-s01b/Makefile new file mode 100644 index 000000000..3929a0c34 --- /dev/null +++ b/arch/mips/ite-boards/qed-4n-s01b/Makefile @@ -0,0 +1,37 @@ +# +# Copyright 2000 MontaVista Software Inc. +# Author: MontaVista Software, Inc. +# ppopov@mvista.com or support@mvista.com +# +# Makefile for the ITE 8172 (qed-4n-s01b) board, board +# specific files. +# +# Note! Dependencies are done automagically by 'make dep', which also +# removes any old dependencies. DON'T put your own dependencies here +# unless it's something special (ie not a .c file). +# + +.S.s: + $(CPP) $(CFLAGS) $< -o $*.s +.S.o: + $(CC) $(CFLAGS) -c $< -o $*.o + +all: ite.o + +O_TARGET := ite.o + +obj-y := init.o + +ifdef CONFIG_PCI +obj-y += pci_fixup.o +endif + +ifdef CONFIG_BLK_DEV_INITRD +obj-y += le_ramdisk.o +endif + + +dep: + $(CPP) -M *.c > .depend + +include $(TOPDIR)/Rules.make diff --git a/arch/mips/ite-boards/qed-4n-s01b/README b/arch/mips/ite-boards/qed-4n-s01b/README new file mode 100644 index 000000000..fb4b5197e --- /dev/null +++ b/arch/mips/ite-boards/qed-4n-s01b/README @@ -0,0 +1,2 @@ +This is an ITE (www.iteusa.com) eval board for the ITE 8172G +system controller, with a QED 5231 CPU. diff --git a/arch/mips/ite-boards/qed-4n-s01b/init.c b/arch/mips/ite-boards/qed-4n-s01b/init.c new file mode 100644 index 000000000..5599b31dc --- /dev/null +++ b/arch/mips/ite-boards/qed-4n-s01b/init.c @@ -0,0 +1,89 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * IT8172/QED5231 board setup. + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/mm.h> +#include <linux/sched.h> +#include <linux/bootmem.h> +#include <asm/addrspace.h> +#include <asm/bootinfo.h> +#include <linux/config.h> +#include <linux/string.h> +#include <linux/kernel.h> +#include <linux/sched.h> +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_dbg.h> + +int prom_argc; +char **prom_argv, **prom_envp; + +extern char _end; +extern void __init prom_init_cmdline(void); +extern unsigned long __init prom_get_memsize(void); +extern void __init it8172_init_ram_resource(unsigned long memsize); + +#define PFN_UP(x) (((x) + PAGE_SIZE-1) >> PAGE_SHIFT) +#define PFN_ALIGN(x) (((unsigned long)(x) + (PAGE_SIZE - 1)) & PAGE_MASK) + + +int __init prom_init(int argc, char **argv, char **envp, int *prom_vec) +{ + unsigned long mem_size, free_start, free_end, bootmap_size; + unsigned long pcicr; + + prom_argc = argc; + prom_argv = argv; + prom_envp = envp; + + puts("ITE board running..."); + + mips_machgroup = MACH_GROUP_ITE; + mips_machtype = MACH_QED_4N_S01B; /* ITE board name/number */ + + prom_init_cmdline(); + mem_size = prom_get_memsize(); + + printk("Memory size: %dMB\n", (unsigned)mem_size); + + mem_size <<= 20; /* MB */ + + /* + * make the entire physical memory visible to pci bus masters + */ + IT_READ(IT_MC_PCICR, pcicr); + pcicr &= ~0x1f; + pcicr |= (mem_size - 1) >> 22; + IT_WRITE(IT_MC_PCICR, pcicr); + + it8172_init_ram_resource(mem_size); + add_memory_region(0, 20 << 20, BOOT_MEM_RAM); + + return 0; +} diff --git a/arch/mips/ite-boards/qed-4n-s01b/pci_fixup.c b/arch/mips/ite-boards/qed-4n-s01b/pci_fixup.c new file mode 100644 index 000000000..befceffa3 --- /dev/null +++ b/arch/mips/ite-boards/qed-4n-s01b/pci_fixup.c @@ -0,0 +1,197 @@ +/* + * + * BRIEF MODULE DESCRIPTION + * Board specific pci fixups. + * + * Copyright 2000 MontaVista Software Inc. + * Author: MontaVista Software, Inc. + * ppopov@mvista.com or support@mvista.com + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ +#include <linux/config.h> + +#ifdef CONFIG_PCI + +#include <linux/types.h> +#include <linux/pci.h> +#include <linux/kernel.h> +#include <linux/init.h> + +#include <asm/it8172/it8172.h> +#include <asm/it8172/it8172_pci.h> +#include <asm/it8172/it8172_int.h> + +void __init board_int_line_fixup(struct pci_dev *dev) +{ + unsigned int slot, func; + unsigned char pin; + const int internal_func_irqs[7] = { + IT8172_AC97_IRQ, + IT8172_DMA_IRQ, + IT8172_CDMA_IRQ, + IT8172_USB_IRQ, + IT8172_BRIDGE_MASTER_IRQ, + IT8172_IDE_IRQ, + IT8172_MC68K_IRQ + }; + +#ifdef DEBUG + printk("board_int_line_fixup bus %d\n", dev->bus->number); +#endif + if (dev->bus->number != 0) + return; + + pci_read_config_byte(dev, PCI_INTERRUPT_PIN, &pin); + +#ifdef DEBUG + pci_read_config_dword(dev, PCI_SUBSYSTEM_VENDOR_ID, &vendor); +#endif + + slot = PCI_SLOT(dev->devfn); + func = PCI_FUNC(dev->devfn); + + switch (slot) { + case 0x01: + /* + * Internal device 1 is actually 7 different internal + * devices on the IT8172G (a multi-function device). + */ + if (func < 7) + dev->irq = internal_func_irqs[func]; + break; + case 0x10: + switch (pin) { + case 1: /* pin A */ + dev->irq = IT8172_PCI_INTA_IRQ; + break; + case 2: /* pin B */ + dev->irq = IT8172_PCI_INTB_IRQ; + break; + case 3: /* pin C */ + dev->irq = IT8172_PCI_INTC_IRQ; + break; + case 4: /* pin D */ + dev->irq = IT8172_PCI_INTD_IRQ; + break; + default: + dev->irq = 0xff; + break; + + } + break; + case 0x11: + switch (pin) { + case 1: /* pin A */ + dev->irq = IT8172_PCI_INTA_IRQ; + break; + case 2: /* pin B */ + dev->irq = IT8172_PCI_INTB_IRQ; + break; + case 3: /* pin C */ + dev->irq = IT8172_PCI_INTC_IRQ; + break; + case 4: /* pin D */ + dev->irq = IT8172_PCI_INTD_IRQ; + break; + default: + dev->irq = 0xff; + break; + + } + break; + case 0x12: + switch (pin) { + case 1: /* pin A */ + dev->irq = IT8172_PCI_INTB_IRQ; + break; + case 2: /* pin B */ + dev->irq = IT8172_PCI_INTC_IRQ; + break; + case 3: /* pin C */ + dev->irq = IT8172_PCI_INTD_IRQ; + break; + case 4: /* pin D */ + dev->irq = IT8172_PCI_INTA_IRQ; + break; + default: + dev->irq = 0xff; + break; + + } + break; + case 0x13: + switch (pin) { + case 1: /* pin A */ + dev->irq = IT8172_PCI_INTC_IRQ; + break; + case 2: /* pin B */ + dev->irq = IT8172_PCI_INTD_IRQ; + break; + case 3: /* pin C */ + dev->irq = IT8172_PCI_INTA_IRQ; + break; + case 4: /* pin D */ + dev->irq = IT8172_PCI_INTB_IRQ; + break; + default: + dev->irq = 0xff; + break; + + } + break; + case 0x14: + switch (pin) { + case 1: /* pin A */ + dev->irq = IT8172_PCI_INTD_IRQ; + break; + case 2: /* pin B */ + dev->irq = IT8172_PCI_INTA_IRQ; + break; + case 3: /* pin C */ + dev->irq = IT8172_PCI_INTB_IRQ; + break; + case 4: /* pin D */ + dev->irq = IT8172_PCI_INTC_IRQ; + break; + default: + dev->irq = 0xff; + break; + + } + break; + default: + return; + } + +#ifdef DEBUG + printk("irq fixup: slot %d, vendor %x, int line %d, int number %d\n", + slot, vendor, pin, dev->irq); +#endif + pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq); + +} + +struct pci_fixup pcibios_fixups[] = { + { PCI_FIXUP_HEADER, PCI_ANY_ID, PCI_ANY_ID, board_int_line_fixup }, + { 0 } +}; +#endif diff --git a/arch/mips/kernel/Makefile b/arch/mips/kernel/Makefile index 02fc79c9d..86947b0ba 100644 --- a/arch/mips/kernel/Makefile +++ b/arch/mips/kernel/Makefile @@ -48,7 +48,9 @@ ifndef CONFIG_DECSTATION ifndef CONFIG_MIPS_ATLAS ifndef CONFIG_MIPS_MALTA ifndef CONFIG_MIPS_EV96100 - obj-y += time.o + ifndef CONFIG_MIPS_ITE8172 + obj-y += time.o + endif endif endif endif diff --git a/arch/mips/kernel/proc.c b/arch/mips/kernel/proc.c index 6725f1864..34feb549d 100644 --- a/arch/mips/kernel/proc.c +++ b/arch/mips/kernel/proc.c @@ -39,11 +39,13 @@ int get_cpuinfo(char *buffer) const char *mach_cosine_names[] = GROUP_COSINE_NAMES; const char *mach_galileo_names[] = GROUP_GALILEO_NAMES; const char *mach_momenco_names[] = GROUP_MOMENCO_NAMES; + const char *mach_ite_names[] = GROUP_ITE_NAMES; const char **mach_group_to_name[] = { mach_unknown_names, mach_jazz_names, mach_dec_names, mach_arc_names, mach_sni_rm_names, mach_acn_names, mach_sgi_names, mach_cobalt_names, mach_nec_ddb_names, mach_baget_names, - mach_cosine_names, mach_galileo_names, mach_momenco_names }; + mach_cosine_names, mach_galileo_names, mach_momenco_names, + mach_ite_names}; unsigned int version = read_32bit_cp0_register(CP0_PRID); int len; diff --git a/arch/mips/kernel/setup.c b/arch/mips/kernel/setup.c index 4f0ee2e92..220c1c148 100644 --- a/arch/mips/kernel/setup.c +++ b/arch/mips/kernel/setup.c @@ -533,6 +533,11 @@ void __init setup_arch(char **cmdline_p) ev64120_setup(); break; #endif +#ifdef CONFIG_MIPS_ITE8172 + case MACH_GROUP_ITE: + it8172_setup(); + break; +#endif default: panic("Unsupported architecture"); } diff --git a/arch/mips/lib/kbd-std.c b/arch/mips/lib/kbd-std.c index 8e7e69ecc..ce75371d5 100644 --- a/arch/mips/lib/kbd-std.c +++ b/arch/mips/lib/kbd-std.c @@ -19,11 +19,17 @@ static void std_kbd_request_region(void) { +#ifdef CONFIG_MIPS_ITE8172 + printk("std_kbd_request_region\n"); + request_region(0x14000060, 16, "keyboard"); +#else request_region(0x60, 16, "keyboard"); +#endif } static int std_kbd_request_irq(void (*handler)(int, void *, struct pt_regs *)) { + printk("std_kbd_request_irq\n"); return request_irq(KEYBOARD_IRQ, handler, 0, "keyboard", NULL); } |