diff options
Diffstat (limited to 'drivers/net/Config.in')
| -rw-r--r-- | drivers/net/Config.in | 398 |
1 files changed, 170 insertions, 228 deletions
diff --git a/drivers/net/Config.in b/drivers/net/Config.in index 1902e5070..b091fc5f0 100644 --- a/drivers/net/Config.in +++ b/drivers/net/Config.in @@ -7,12 +7,12 @@ comment 'ARCnet devices' tristate 'ARCnet support' CONFIG_ARCNET if [ "$CONFIG_ARCNET" != "n" ]; then - bool ' Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH - bool ' Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051 - dep_tristate ' ARCnet COM90xx (normal) chipset driver' CONFIG_ARCNET_COM90xx $CONFIG_ARCNET - dep_tristate ' ARCnet COM90xx (IO mapped) chipset driver' CONFIG_ARCNET_COM90xxIO $CONFIG_ARCNET - dep_tristate ' ARCnet COM90xx (RIM I) chipset driver' CONFIG_ARCNET_RIM_I $CONFIG_ARCNET - dep_tristate ' ARCnet COM20020 chipset driver' CONFIG_ARCNET_COM20020 $CONFIG_ARCNET + bool ' Enable arc0e (ARCnet "Ether-Encap" packet format)' CONFIG_ARCNET_ETH + bool ' Enable arc0s (ARCnet RFC1051 packet format)' CONFIG_ARCNET_1051 + dep_tristate ' ARCnet COM90xx (normal) chipset driver' CONFIG_ARCNET_COM90xx $CONFIG_ARCNET + dep_tristate ' ARCnet COM90xx (IO mapped) chipset driver' CONFIG_ARCNET_COM90xxIO $CONFIG_ARCNET + dep_tristate ' ARCnet COM90xx (RIM I) chipset driver' CONFIG_ARCNET_RIM_I $CONFIG_ARCNET + dep_tristate ' ARCnet COM20020 chipset driver' CONFIG_ARCNET_COM20020 $CONFIG_ARCNET fi endmenu @@ -20,9 +20,9 @@ endmenu tristate 'Dummy net driver support' CONFIG_DUMMY tristate 'EQL (serial line load balancing) support' CONFIG_EQUALIZER if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - if [ "$CONFIG_NETLINK" = "y" ]; then - tristate 'Ethertap network tap' CONFIG_ETHERTAP - fi + if [ "$CONFIG_NETLINK" = "y" ]; then + tristate 'Ethertap network tap (EXPERIMENTAL)' CONFIG_ETHERTAP + fi fi tristate 'General Instruments Surfboard 1000' CONFIG_NET_SB1000 @@ -36,145 +36,154 @@ comment 'Ethernet (10 or 100Mbit)' bool 'Ethernet (10 or 100Mbit)' CONFIG_NET_ETHERNET if [ "$CONFIG_NET_ETHERNET" = "y" ]; then - if [ "$CONFIG_ARM" = "y" ]; then - if [ "$CONFIG_ARCH_ACORN" != "y" ]; then - tristate 'AM79C961A support' CONFIG_ARM_AM79C961A - else - source drivers/acorn/net/Config.in - fi - fi - if [ "$CONFIG_PPC" = "y" ]; then - tristate 'MACE (Power Mac ethernet) support' CONFIG_MACE - tristate 'BMAC (G3 ethernet) support' CONFIG_BMAC - fi - if [ "$CONFIG_ZORRO" = "y" ]; then - tristate 'Ariadne support' CONFIG_ARIADNE - tristate 'Ariadne II support' CONFIG_ARIADNE2 - tristate 'A2065 support' CONFIG_A2065 - tristate 'Hydra support' CONFIG_HYDRA - fi - if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then - tristate 'MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC - fi - bool '3COM cards' CONFIG_NET_VENDOR_3COM - if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then - tristate '3c501 support' CONFIG_EL1 - tristate '3c503 support' CONFIG_EL2 - tristate '3c505 support' CONFIG_ELPLUS - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate '3c507 support' CONFIG_EL16 + if [ "$CONFIG_ARM" = "y" ]; then + if [ "$CONFIG_ARCH_ACORN" != "y" ]; then + tristate ' AM79C961A support' CONFIG_ARM_AM79C961A + else + source drivers/acorn/net/Config.in + fi + fi + if [ "$CONFIG_PPC" = "y" ]; then + tristate ' MACE (Power Mac ethernet) support' CONFIG_MACE + tristate ' BMAC (G3 ethernet) support' CONFIG_BMAC + fi + if [ "$CONFIG_ZORRO" = "y" ]; then + tristate ' Ariadne support' CONFIG_ARIADNE + tristate ' Ariadne II support' CONFIG_ARIADNE2 + tristate ' A2065 support' CONFIG_A2065 + tristate ' Hydra support' CONFIG_HYDRA + fi + if [ "$CONFIG_MIPS_JAZZ" = "y" ]; then + tristate ' MIPS JAZZ onboard SONIC Ethernet support' CONFIG_MIPS_JAZZ_SONIC + fi + bool ' 3COM cards' CONFIG_NET_VENDOR_3COM + if [ "$CONFIG_NET_VENDOR_3COM" = "y" ]; then + tristate ' 3c501 support' CONFIG_EL1 + tristate ' 3c503 support' CONFIG_EL2 + tristate ' 3c505 support' CONFIG_ELPLUS + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' 3c507 support (EXPERIMENTAL)' CONFIG_EL16 + fi + tristate ' 3c509/3c529 (MCA)/3c579 support' CONFIG_EL3 + tristate ' 3c515 ISA Fast EtherLink' CONFIG_3C515 if [ "$CONFIG_MCA" = "y" ]; then - tristate '3c523 support' CONFIG_ELMC - tristate '3c527 support' CONFIG_ELMC_II + tristate ' 3c523 support' CONFIG_ELMC + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' 3c527 support (EXPERIMENTAL)' CONFIG_ELMC_II + fi fi - fi - tristate '3c509/3c579 support' CONFIG_EL3 - tristate '3c515 ISA Fast EtherLink' CONFIG_3C515 - tristate '3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX - fi - tristate 'AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE - bool 'Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC - if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then - tristate 'WD80*3 support' CONFIG_WD80x3 - if [ "$CONFIG_MCA" = "y" ]; then - tristate 'SMC Ultra MCA support' CONFIG_ULTRAMCA - fi - tristate 'SMC Ultra support' CONFIG_ULTRA - tristate 'SMC Ultra32 EISA support' CONFIG_ULTRA32 - tristate 'SMC 9194 support' CONFIG_SMC9194 + tristate ' 3c590/3c900 series (592/595/597) "Vortex/Boomerang" support' CONFIG_VORTEX + fi + tristate ' AMD LANCE and PCnet (AT1500 and NE2100) support' CONFIG_LANCE + bool ' Western Digital/SMC cards' CONFIG_NET_VENDOR_SMC + if [ "$CONFIG_NET_VENDOR_SMC" = "y" ]; then + tristate ' WD80*3 support' CONFIG_WD80x3 + if [ "$CONFIG_MCA" = "y" ]; then + tristate ' SMC Ultra MCA support' CONFIG_ULTRAMCA + fi + tristate ' SMC Ultra support' CONFIG_ULTRA + tristate ' SMC Ultra32 EISA support' CONFIG_ULTRA32 + tristate ' SMC 9194 support' CONFIG_SMC9194 fi - bool 'Racal-Interlan (Micom) NI cards' CONFIG_NET_VENDOR_RACAL + bool ' Racal-Interlan (Micom) NI cards' CONFIG_NET_VENDOR_RACAL if [ "$CONFIG_NET_VENDOR_RACAL" = "y" ]; then if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'NI5010 support' CONFIG_NI5010 + tristate ' NI5010 support (EXPERIMENTAL)' CONFIG_NI5010 fi - tristate 'NI5210 support' CONFIG_NI52 - tristate 'NI6510 support' CONFIG_NI65 + tristate ' NI5210 support' CONFIG_NI52 + tristate ' NI6510 support' CONFIG_NI65 fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'RealTek 8129/8139 (not 8019/8029!) support' CONFIG_RTL8139 - tristate 'SiS 900 PCI Fast Ethernet Adapter support' CONFIG_SIS900 - tristate 'Packet Engines Yellowfin Gigabit-NIC support' CONFIG_YELLOWFIN - tristate 'Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC + # tristate ' Packet Engines Hamachi GNIC-II support (EXPERIMENTAL)' CONFIG_HAMACHI + tristate ' Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)' CONFIG_YELLOWFIN + tristate ' RealTek 8129/8139 (not 8019/8029!) support (EXPERIMENTAL)' CONFIG_RTL8139 + tristate ' SiS 900 PCI Fast Ethernet Adapter support (EXPERIMENTAL)' CONFIG_SIS900 + tristate ' DM9102 PCI Fast Ethernet Adapter support (EXPERIMENTAL)' CONFIG_DM9102 + fi + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 + fi + tristate ' DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA + bool ' Other ISA cards' CONFIG_NET_ISA + if [ "$CONFIG_NET_ISA" = "y" ]; then + tristate ' Cabletron E21xx support' CONFIG_E2100 + tristate ' EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3 + tristate ' EtherExpress 16 support' CONFIG_EEXPRESS + tristate ' EtherExpressPro support' CONFIG_EEXPRESS_PRO + tristate ' FMV-181/182/183/184 support' CONFIG_FMV18X + tristate ' HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS + tristate ' HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN + tristate ' HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' ICL EtherTeam 16i/32 support (EXPERIMENTAL)' CONFIG_ETH16I + fi + tristate ' NE2000/NE1000 support' CONFIG_NE2000 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 + fi + bool ' SK_G16 support' CONFIG_SK_G16 + fi + if [ "$CONFIG_MCA" = "y" ]; then + tristate ' SKnet MCA support' CONFIG_SKMC + tristate ' NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA + fi + bool ' EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA + if [ "$CONFIG_NET_EISA" = "y" ]; then + tristate ' AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32 +# if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then +# tristate ' Adaptec Starfire support (EXPERIMENTAL)' CONFIG_ADAPTEC_STARFIRE +# fi + tristate ' Alteon AceNIC/3Com 3C985/NetGear GA620 Gigabit support' CONFIG_ACENIC if [ "$CONFIG_ACENIC" != "n" ]; then - bool 'Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I + bool ' Omit support for old Tigon I based AceNICs' CONFIG_ACENIC_OMIT_TIGON_I + fi + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 fi - fi - bool 'Other ISA cards' CONFIG_NET_ISA - if [ "$CONFIG_NET_ISA" = "y" ]; then - tristate 'AT1700/1720 support (EXPERIMENTAL)' CONFIG_AT1700 - tristate 'Cabletron E21xx support' CONFIG_E2100 - tristate 'DEPCA, DE10x, DE200, DE201, DE202, DE422 support' CONFIG_DEPCA - tristate 'EtherWORKS 3 (DE203, DE204, DE205) support' CONFIG_EWRK3 - tristate 'EtherExpress 16 support' CONFIG_EEXPRESS - tristate 'EtherExpressPro support' CONFIG_EEXPRESS_PRO - tristate 'FMV-181/182/183/184 support' CONFIG_FMV18X - tristate 'HP PCLAN+ (27247B and 27252A) support' CONFIG_HPLAN_PLUS - tristate 'HP PCLAN (27245 and other 27xxx series) support' CONFIG_HPLAN - tristate 'HP 10/100VG PCLAN (ISA, EISA, PCI) support' CONFIG_HP100 - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'ICL EtherTeam 16i/32 support' CONFIG_ETH16I - fi - tristate 'NE2000/NE1000 support' CONFIG_NE2000 - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'SEEQ8005 support (EXPERIMENTAL)' CONFIG_SEEQ8005 - fi - bool 'SK_G16 support' CONFIG_SK_G16 - fi - if [ "$CONFIG_MCA" = "y" ]; then - tristate 'NE/2 (ne2000 MCA version) support' CONFIG_NE2_MCA - tristate 'SKnet MCA support' CONFIG_SKMC - fi - bool 'EISA, VLB, PCI and on board controllers' CONFIG_NET_EISA - if [ "$CONFIG_NET_EISA" = "y" ]; then - tristate 'AMD PCnet32 (VLB and PCI) support' CONFIG_PCNET32 - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'Ansel Communications EISA 3200 support (EXPERIMENTAL)' CONFIG_AC3200 - fi - tristate 'Apricot Xen-II on board Ethernet' CONFIG_APRICOT - tristate 'CS89x0 support' CONFIG_CS89x0 - tristate 'Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5 - tristate 'DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP - tristate 'Digi Intl. RightSwitch SE-X support' CONFIG_DGRS - tristate 'EtherExpressPro/100 support' CONFIG_EEXPRESS_PRO100 - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390 - tristate 'Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)' CONFIG_NE3210 - fi - tristate 'PCI NE2000 support' CONFIG_NE2K_PCI - tristate 'TI ThunderLAN support' CONFIG_TLAN - tristate 'VIA Rhine support' CONFIG_VIA_RHINE - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'Racal-Interlan EISA ES3210 support (EXPERIMENTAL)' CONFIG_ES3210 - tristate 'SMC EtherPower II (EXPERIMENTAL)' CONFIG_EPIC100 - bool 'Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET - fi - tristate 'Adaptec Starfire support' CONFIG_ADAPTEC_STARFIRE - fi - bool 'Pocket and portable adaptors' CONFIG_NET_POCKET - if [ "$CONFIG_NET_POCKET" = "y" ]; then - bool 'AT-LAN-TEC/RealTek pocket adaptor support' CONFIG_ATP - tristate 'D-Link DE600 pocket adaptor support' CONFIG_DE600 - tristate 'D-Link DE620 pocket adaptor support' CONFIG_DE620 - fi + tristate ' Apricot Xen-II on board Ethernet' CONFIG_APRICOT + tristate ' CS89x0 support' CONFIG_CS89x0 + tristate ' Generic DECchip & DIGITAL EtherWORKS PCI/EISA' CONFIG_DE4X5 + tristate ' DECchip Tulip (dc21x4x) PCI support' CONFIG_DEC_ELCP + tristate ' Digi Intl. RightSwitch SE-X support' CONFIG_DGRS + tristate ' EtherExpressPro/100 support' CONFIG_EEXPRESS_PRO100 + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' Mylex EISA LNE390A/B support (EXPERIMENTAL)' CONFIG_LNE390 + tristate ' Novell/Eagle/Microdyne NE3210 EISA support (EXPERIMENTAL)' CONFIG_NE3210 + fi + tristate ' PCI NE2000 support' CONFIG_NE2K_PCI + # tristate ' Sundance Alta support' CONFIG_ALTA + tristate ' TI ThunderLAN support' CONFIG_TLAN + tristate ' VIA Rhine support' CONFIG_VIA_RHINE + if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then + tristate ' Racal-Interlan EISA ES3210 support (EXPERIMENTAL)' CONFIG_ES3210 + tristate ' SMC EtherPower II (EXPERIMENTAL)' CONFIG_EPIC100 + bool ' Zenith Z-Note support (EXPERIMENTAL)' CONFIG_ZNET + fi + fi + bool ' Pocket and portable adapters' CONFIG_NET_POCKET + if [ "$CONFIG_NET_POCKET" = "y" ]; then + bool ' AT-LAN-TEC/RealTek pocket adapter support' CONFIG_ATP + tristate ' D-Link DE600 pocket adapter support' CONFIG_DE600 + tristate ' D-Link DE620 pocket adapter support' CONFIG_DE620 + fi fi endmenu bool 'FDDI driver support' CONFIG_FDDI if [ "$CONFIG_FDDI" = "y" ]; then - bool 'Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX + bool ' Digital DEFEA and DEFPA adapter support' CONFIG_DEFXX fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI - if [ "$CONFIG_HIPPI" = "y" ]; then - tristate 'Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER - if [ "$CONFIG_ROADRUNNER" != "n" ]; then - bool ' Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS - fi - fi + bool 'HIPPI driver support (EXPERIMENTAL)' CONFIG_HIPPI + if [ "$CONFIG_HIPPI" = "y" ]; then + tristate ' Essential RoadRunner HIPPI PCI adapter support' CONFIG_ROADRUNNER + if [ "$CONFIG_ROADRUNNER" != "n" ]; then + bool ' Use large TX/RX rings' CONFIG_ROADRUNNER_LARGE_RINGS + fi + fi fi # @@ -182,133 +191,66 @@ fi # if [ "$CONFIG_ATALK" != "n" ]; then - mainmenu_option next_comment - comment 'Appletalk devices' - dep_tristate 'Apple/Farallon LocalTalk PC support' CONFIG_LTPC $CONFIG_ATALK - dep_tristate 'COPS LocalTalk PC support' CONFIG_COPS $CONFIG_ATALK - if [ "$CONFIG_COPS" != "n" ]; then - bool 'Dayna firmware support' CONFIG_COPS_DAYNA - bool 'Tangent firmware support' CONFIG_COPS_TANGENT - fi - dep_tristate 'Appletalk-IP driver support' CONFIG_IPDDP $CONFIG_ATALK - if [ "$CONFIG_IPDDP" != "n" ]; then - bool 'IP to Appletalk-IP Encapsulation support' CONFIG_IPDDP_ENCAP - bool 'Appletalk-IP to IP Decapsulation support' CONFIG_IPDDP_DECAP - fi - endmenu + mainmenu_option next_comment + comment 'Appletalk devices' + dep_tristate 'Apple/Farallon LocalTalk PC support' CONFIG_LTPC $CONFIG_ATALK + dep_tristate 'COPS LocalTalk PC support' CONFIG_COPS $CONFIG_ATALK + if [ "$CONFIG_COPS" != "n" ]; then + bool ' Dayna firmware support' CONFIG_COPS_DAYNA + bool ' Tangent firmware support' CONFIG_COPS_TANGENT + fi + dep_tristate 'Appletalk-IP driver support' CONFIG_IPDDP $CONFIG_ATALK + if [ "$CONFIG_IPDDP" != "n" ]; then + bool ' IP to Appletalk-IP Encapsulation support' CONFIG_IPDDP_ENCAP + bool ' Appletalk-IP to IP Decapsulation support' CONFIG_IPDDP_DECAP + fi + endmenu fi if [ ! "$CONFIG_PARPORT" = "n" ]; then - dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT + dep_tristate 'PLIP (parallel port) support' CONFIG_PLIP $CONFIG_PARPORT fi tristate 'PPP (point-to-point protocol) support' CONFIG_PPP if [ ! "$CONFIG_PPP" = "n" ]; then - dep_tristate 'PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP - dep_tristate 'PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP - dep_tristate 'PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m + dep_tristate ' PPP support for async serial ports' CONFIG_PPP_ASYNC $CONFIG_PPP + dep_tristate ' PPP Deflate compression' CONFIG_PPP_DEFLATE $CONFIG_PPP + dep_tristate ' PPP BSD-Compress compression' CONFIG_PPP_BSDCOMP m fi tristate 'SLIP (serial line) support' CONFIG_SLIP if [ "$CONFIG_SLIP" != "n" ]; then - bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED - bool ' Keepalive and linefill' CONFIG_SLIP_SMART - bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6 + bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED + bool ' Keepalive and linefill' CONFIG_SLIP_SMART + bool ' Six bit SLIP encapsulation' CONFIG_SLIP_MODE_SLIP6 fi +mainmenu_option next_comment +comment 'Wireless LAN (non-hamradio)' + bool 'Wireless LAN (non-hamradio)' CONFIG_NET_RADIO if [ "$CONFIG_NET_RADIO" = "y" ]; then - dep_tristate 'STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET - tristate 'AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN - tristate 'Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN - -fi - -mainmenu_option next_comment -comment 'Token ring devices' + dep_tristate ' STRIP (Metricom starmode radio IP)' CONFIG_STRIP $CONFIG_INET + tristate ' AT&T WaveLAN & DEC RoamAbout DS support' CONFIG_WAVELAN + tristate ' Aironet Arlan 655 & IC2200 DS support' CONFIG_ARLAN -bool 'Token Ring driver support' CONFIG_TR -if [ "$CONFIG_TR" = "y" ]; then - tristate 'IBM Tropic chipset based adaptor support' CONFIG_IBMTR -# tristate 'IBM Lanstreamer PCI adaptor support' CONFIG_IBMLS - tristate 'IBM Olympic chipset PCI adapter support' CONFIG_IBMOL - tristate 'SysKonnect adapter support' CONFIG_SKTR fi endmenu +source drivers/net/tokenring/Config.in + bool 'Fibre Channel driver support' CONFIG_NET_FC if [ "$CONFIG_NET_FC" = "y" ]; then - tristate 'Interphase 5526 Tachyon chipset based adaptor support' CONFIG_IPHASE5526 + dep_tristate ' Interphase 5526 Tachyon chipset based adapter support' CONFIG_IPHASE5526 $CONFIG_SCSI fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI - tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER -fi - -# -# WAN drivers support -# - -mainmenu_option next_comment -comment 'Wan interfaces' - - -# There is no way to detect a comtrol sv11 - force it modular for now. -# -dep_tristate 'Comtrol Hostess SV-11 support' CONFIG_HOSTESS_SV11 m -# -# The COSA/SRP driver has not been tested as non-modular yet. -# -dep_tristate 'COSA/SRP sync serial boards support' CONFIG_COSA m -# -# There is no way to detect a Sealevel board. Force it modular -# -dep_tristate 'Sealevel Systems 4021 support' CONFIG_SEALEVEL_4021 m - -tristate 'Frame relay DLCI support' CONFIG_DLCI -if [ "$CONFIG_DLCI" != "n" ]; then - int ' Max open DLCI' CONFIG_DLCI_COUNT 24 - int ' Max DLCI per device' CONFIG_DLCI_MAX 8 - dep_tristate ' SDLA (Sangoma S502/S508) support' CONFIG_SDLA $CONFIG_DLCI + tristate 'Red Creek Hardware VPN (EXPERIMENTAL)' CONFIG_RCPCI + tristate 'Traffic Shaper (EXPERIMENTAL)' CONFIG_SHAPER fi -# -# Wan router core. -# - -if [ "$CONFIG_WAN_ROUTER" != "n" ]; then - bool 'WAN drivers' CONFIG_WAN_DRIVERS - if [ "$CONFIG_WAN_DRIVERS" = "y" ]; then - dep_tristate 'Sangoma WANPIPE(tm) multiprotocol cards' CONFIG_VENDOR_SANGOMA $CONFIG_WAN_DRIVERS - if [ "$CONFIG_VENDOR_SANGOMA" != "n" ]; then - int ' Maximum number of cards' CONFIG_WANPIPE_CARDS 1 - bool ' WANPIPE X.25 support' CONFIG_WANPIPE_X25 - bool ' WANPIPE Frame Relay support' CONFIG_WANPIPE_FR - bool ' WANPIPE PPP support' CONFIG_WANPIPE_PPP - fi - if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then - dep_tristate 'Cyclom 2X(tm) multiprotocol cards (EXPERIMENTAL)' CONFIG_CYCLADES_SYNC $CONFIG_WAN_DRIVERS - if [ "$CONFIG_CYCLADES_SYNC" != "n" ]; then - bool ' Cyclom 2X X.25 support (EXPERIMENTAL)' CONFIG_CYCLOMX_X25 - fi - fi - fi -fi - -endmenu - - -# -# X.25 network drivers -# -if [ "$CONFIG_X25" != "n" ]; then -if [ "$CONFIG_LAPB" != "n" ]; then - dep_tristate 'LAPB over Ethernet driver' CONFIG_LAPBETHER $CONFIG_LAPB - dep_tristate 'X.25 async driver' CONFIG_X25_ASY $CONFIG_LAPB -fi -fi +source drivers/net/wan/Config.in if [ "$CONFIG_PCMCIA" != "n" ]; then source drivers/net/pcmcia/Config.in |