diff options
Diffstat (limited to 'drivers/net/sdla.c')
| -rw-r--r-- | drivers/net/sdla.c | 1714 |
1 files changed, 1714 insertions, 0 deletions
diff --git a/drivers/net/sdla.c b/drivers/net/sdla.c new file mode 100644 index 000000000..f5e4b16a6 --- /dev/null +++ b/drivers/net/sdla.c @@ -0,0 +1,1714 @@ +/* + * SDLA An implementation of a driver for the Sangoma S502/S508 series + * multi-protocol PC interface card. Initial offering is with + * the DLCI driver, providing Frame Relay support for linux. + * + * Global definitions for the Frame relay interface. + * + * Version: @(#)sdla.c 0.30 12 Sep 1996 + * + * Credits: Sangoma Technologies, for the use of 2 cards for an extended + * period of time. + * David Mandelstam <dm@sangoma.com> for getting me started on + * this project, and incentive to complete it. + * Gene Kozen <74604.152@compuserve.com> for providing me with + * important information about the cards. + * + * Author: Mike McLagan <mike.mclagan@linux.org> + * + * Changes: + * 0.15 Mike McLagan Improved error handling, packet dropping + * 0.20 Mike McLagan New transmit/receive flags for config + * If in FR mode, don't accept packets from + * non DLCI devices. + * 0.25 Mike McLagan Fixed problem with rejecting packets + * from non DLCI devices. + * 0.30 Mike McLagan Fixed kernel panic when used with modified + * ifconfig + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version + * 2 of the License, or (at your option) any later version. + */ + +#include <linux/module.h> + +#include <linux/kernel.h> +#include <linux/sched.h> +#include <linux/types.h> +#include <linux/fcntl.h> +#include <linux/interrupt.h> +#include <linux/ptrace.h> +#include <linux/ioport.h> +#include <linux/in.h> +#include <linux/malloc.h> +#include <linux/string.h> +#include <linux/timer.h> +#include <linux/errno.h> + +#include <asm/system.h> +#include <asm/bitops.h> +#include <asm/io.h> +#include <asm/dma.h> +#include <asm/uaccess.h> + +#include <linux/netdevice.h> +#include <linux/skbuff.h> +#include <linux/if_arp.h> +#include <linux/if_frad.h> + +#include <linux/sdla.h> + +static const char* version = "SDLA driver v0.30, 12 Sep 1996, mike.mclagan@linux.org"; + +static const char* devname = "sdla"; + +static unsigned int valid_port[] = { 0x250, 0x270, 0x280, 0x300, 0x350, 0x360, 0x380, 0x390}; + +static unsigned int valid_mem[] = {0xA0000, 0xA2000, 0xA4000, 0xA6000, 0xA8000, 0xAA000, 0xAC000, 0xAE000, + 0xB0000, 0xB2000, 0xB4000, 0xB6000, 0xB8000, 0xBA000, 0xBC000, 0xBE000, + 0xC0000, 0xC2000, 0xC4000, 0xC6000, 0xC8000, 0xCA000, 0xCC000, 0xCE000, + 0xD0000, 0xD2000, 0xD4000, 0xD6000, 0xD8000, 0xDA000, 0xDC000, 0xDE000, + 0xE0000, 0xE2000, 0xE4000, 0xE6000, 0xE8000, 0xEA000, 0xEC000, 0xEE000}; + +/********************************************************* + * + * these are the core routines that access the card itself + * + *********************************************************/ + +#define SDLA_WINDOW(dev,addr) outb((((addr) >> 13) & 0x1F), (dev)->base_addr + SDLA_REG_Z80_WINDOW) + +static void sdla_read(struct device *dev, int addr, void *buf, short len) +{ + unsigned long flags; + char *temp, *base; + int offset, bytes; + + temp = buf; + while(len) + { + offset = addr & SDLA_ADDR_MASK; + bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len; + base = (void *) (dev->mem_start + offset); + + save_flags(flags); + cli(); + SDLA_WINDOW(dev, addr); + memcpy(temp, base, bytes); + restore_flags(flags); + + addr += bytes; + temp += bytes; + len -= bytes; + } +} + +static void sdla_write(struct device *dev, int addr, void *buf, short len) +{ + unsigned long flags; + char *temp, *base; + int offset, bytes; + + temp = buf; + while(len) + { + offset = addr & SDLA_ADDR_MASK; + bytes = offset + len > SDLA_WINDOW_SIZE ? SDLA_WINDOW_SIZE - offset : len; + base = (void *) (dev->mem_start + offset); + + save_flags(flags); + cli(); + SDLA_WINDOW(dev, addr); + memcpy(base, temp, bytes); + restore_flags(flags); + + addr += bytes; + temp += bytes; + len -= bytes; + } +} + +static void sdla_clear(struct device *dev) +{ + unsigned long flags; + char *base; + int len, addr, bytes; + + len = 65536; + addr = 0; + bytes = SDLA_WINDOW_SIZE; + base = (void *) dev->mem_start; + + save_flags(flags); + cli(); + while(len) + { + SDLA_WINDOW(dev, addr); + memset(base, 0, bytes); + + addr += bytes; + len -= bytes; + } + restore_flags(flags); +} + +static char sdla_byte(struct device *dev, int addr) +{ + unsigned long flags; + char byte, *temp; + + temp = (void *) (dev->mem_start + (addr & SDLA_ADDR_MASK)); + + save_flags(flags); + cli(); + SDLA_WINDOW(dev, addr); + byte = *temp; + restore_flags(flags); + + return(byte); +} + +void sdla_stop(struct device *dev) +{ + struct frad_local *flp; + + flp = dev->priv; + switch(flp->type) + { + case SDLA_S502A: + outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL); + flp->state = SDLA_HALT; + break; + case SDLA_S502E: + outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL); + outb(SDLA_S502E_ENABLE, dev->base_addr + SDLA_REG_CONTROL); + flp->state = SDLA_S502E_ENABLE; + break; + case SDLA_S507: + flp->state &= ~SDLA_CPUEN; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + break; + case SDLA_S508: + flp->state &= ~SDLA_CPUEN; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + break; + } +} + +void sdla_start(struct device *dev) +{ + struct frad_local *flp; + + flp = dev->priv; + switch(flp->type) + { + case SDLA_S502A: + outb(SDLA_S502A_NMI, dev->base_addr + SDLA_REG_CONTROL); + outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL); + flp->state = SDLA_S502A_START; + break; + case SDLA_S502E: + outb(SDLA_S502E_CPUEN, dev->base_addr + SDLA_REG_Z80_CONTROL); + outb(0x00, dev->base_addr + SDLA_REG_CONTROL); + flp->state = 0; + break; + case SDLA_S507: + flp->state |= SDLA_CPUEN; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + break; + case SDLA_S508: + flp->state |= SDLA_CPUEN; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + break; + } +} + +/**************************************************** + * + * this is used for the S502A/E cards to determine + * the speed of the onboard CPU. Calibration is + * necessary for the Frame Relay code uploaded + * later. Incorrect results cause timing problems + * with link checks & status messages + * + ***************************************************/ + +int sdla_z80_poll(struct device *dev, int z80_addr, int jiffs, char resp1, char resp2) +{ + unsigned long start, done, now; + char resp, *temp; + + start = now = jiffies; + done = jiffies + jiffs; + + temp = (void *)dev->mem_start; + temp += z80_addr & SDLA_ADDR_MASK; + + resp = ~resp1; + while ((jiffies < done) && (resp != resp1) && (!resp2 || (resp != resp2))) + { + if (jiffies != now) + { + SDLA_WINDOW(dev, z80_addr); + now = jiffies; + resp = *temp; + } + } + return(jiffies < done ? jiffies - start : -1); +} + +/* constants for Z80 CPU speed */ +#define Z80_READY '1' /* Z80 is ready to begin */ +#define LOADER_READY '2' /* driver is ready to begin */ +#define Z80_SCC_OK '3' /* SCC is on board */ +#define Z80_SCC_BAD '4' /* SCC was not found */ + +static int sdla_cpuspeed(struct device *dev, struct ifreq *ifr) +{ + int jiffs; + char data; + + sdla_start(dev); + if (sdla_z80_poll(dev, 0, 3*HZ, Z80_READY, 0) < 0) + return(-EIO); + + data = LOADER_READY; + sdla_write(dev, 0, &data, 1); + + if ((jiffs = sdla_z80_poll(dev, 0, 8*HZ, Z80_SCC_OK, Z80_SCC_BAD)) < 0) + return(-EIO); + + sdla_stop(dev); + sdla_read(dev, 0, &data, 1); + + if (data == Z80_SCC_BAD) + return(-EIO); + + if (data != Z80_SCC_OK) + return(-EINVAL); + + if (jiffs < 165) + ifr->ifr_mtu = SDLA_CPU_16M; + else + if (jiffs < 220) + ifr->ifr_mtu = SDLA_CPU_10M; + else + if (jiffs < 258) + ifr->ifr_mtu = SDLA_CPU_8M; + else + if (jiffs < 357) + ifr->ifr_mtu = SDLA_CPU_7M; + else + if (jiffs < 467) + ifr->ifr_mtu = SDLA_CPU_5M; + else + ifr->ifr_mtu = SDLA_CPU_3M; + + return(0); +} + +/************************************************ + * + * Direct interaction with the Frame Relay code + * starts here. + * + ************************************************/ + +struct _dlci_stat { + short dlci __attribute__((packed)); + char flags __attribute__((packed)); +}; + +struct _frad_stat { + char flags; + struct _dlci_stat dlcis[SDLA_MAX_DLCI]; +}; + +static void sdla_errors(struct device *dev, int cmd, int dlci, int ret, int len, void *data) +{ + struct _dlci_stat *pstatus; + short *pdlci; + int i; + char *state, line[30]; + + switch (ret) + { + case SDLA_RET_MODEM: + state = data; + if (*state & SDLA_MODEM_DCD_LOW) + printk(KERN_INFO "%s: Modem DCD unexpectedly low!\n", dev->name); + if (*state & SDLA_MODEM_CTS_LOW) + printk(KERN_INFO "%s: Modem CTS unexpectedly low!\n", dev->name); +/* I should probably do something about this! */ + break; + + case SDLA_RET_CHANNEL_OFF: + printk(KERN_INFO "%s: Channel became inoperative!\n", dev->name); +/* same here */ + break; + + case SDLA_RET_CHANNEL_ON: + printk(KERN_INFO "%s: Channel became operative!\n", dev->name); +/* same here */ + break; + + case SDLA_RET_DLCI_STATUS: + printk(KERN_INFO "%s: Status change reported by Access Node.\n", dev->name); + len /= sizeof(struct _dlci_stat); + for(pstatus = data, i=0;i < len;i++,pstatus++) + { + if (pstatus->flags & SDLA_DLCI_NEW) + state = "new"; + else + if (pstatus->flags & SDLA_DLCI_DELETED) + state = "deleted"; + else + if (pstatus->flags & SDLA_DLCI_ACTIVE) + state = "active"; + else + { + sprintf(line, "unknown status: %02X", pstatus->flags); + state = line; + } + printk(KERN_INFO "%s: DLCI %i: %s.\n", dev->name, pstatus->dlci, state); +/* same here */ + } + break; + + case SDLA_RET_DLCI_UNKNOWN: + printk(KERN_INFO "%s: Received unknown DLCIs:", dev->name); + len /= sizeof(short); + for(pdlci = data,i=0;i < len;i++,pdlci++) + printk(" %i", *pdlci); + printk("\n"); + break; + + case SDLA_RET_TIMEOUT: + printk(KERN_ERR "%s: Command timed out!\n", dev->name); + break; + + case SDLA_RET_BUF_OVERSIZE: + printk(KERN_INFO "%s: Bc/CIR overflow, acceptable size is %i\n", dev->name, len); + break; + + case SDLA_RET_BUF_TOO_BIG: + printk(KERN_INFO "%s: Buffer size over specified max of %i\n", dev->name, len); + break; + + case SDLA_RET_CHANNEL_INACTIVE: + case SDLA_RET_DLCI_INACTIVE: + case SDLA_RET_CIR_OVERFLOW: + case SDLA_RET_NO_BUFS: + if (cmd == SDLA_INFORMATION_WRITE) + break; + + default: + printk(KERN_DEBUG "%s: Cmd 0x%2.2X generated return code 0x%2.2X\n", dev->name, cmd, ret); +/* Further processing could be done here */ + break; + } +} + +static int sdla_cmd(struct device *dev, int cmd, short dlci, short flags, + void *inbuf, short inlen, void *outbuf, short *outlen) +{ + static struct _frad_stat status; + struct frad_local *flp; + struct sdla_cmd *cmd_buf; + unsigned long pflags; + int jiffs, ret, waiting, len; + long window; + + flp = dev->priv; + + window = flp->type == SDLA_S508 ? SDLA_508_CMD_BUF : SDLA_502_CMD_BUF; + cmd_buf = (struct sdla_cmd *)(dev->mem_start + (window & SDLA_ADDR_MASK)); + ret = 0; + len = 0; + jiffs = jiffies + HZ; /* 1 second is plenty */ + save_flags(pflags); + cli(); + SDLA_WINDOW(dev, window); + cmd_buf->cmd = cmd; + cmd_buf->dlci = dlci; + cmd_buf->flags = flags; + + if (inbuf) + memcpy(cmd_buf->data, inbuf, inlen); + + cmd_buf->length = inlen; + + cmd_buf->opp_flag = 1; + restore_flags(pflags); + + waiting = 1; + len = 0; + while (waiting && (jiffies <= jiffs)) + { + if (waiting++ % 3) + { + save_flags(pflags); + cli(); + SDLA_WINDOW(dev, window); + waiting = ((volatile)(cmd_buf->opp_flag)); + restore_flags(pflags); + } + } + + if (!waiting) + { + save_flags(pflags); + cli(); + SDLA_WINDOW(dev, window); + ret = cmd_buf->retval; + len = cmd_buf->length; + if (outbuf && outlen) + { + *outlen = *outlen >= len ? len : *outlen; + + if (*outlen) + memcpy(outbuf, cmd_buf->data, *outlen); + } + + /* This is a local copy that's used for error handling */ + if (ret) + memcpy(&status, cmd_buf->data, len > sizeof(status) ? sizeof(status) : len); + + restore_flags(pflags); + } + else + ret = SDLA_RET_TIMEOUT; + + if (ret != SDLA_RET_OK) + sdla_errors(dev, cmd, dlci, ret, len, &status); + + return(ret); +} + +/*********************************************** + * + * these functions are called by the DLCI driver + * + ***********************************************/ + +static int sdla_reconfig(struct device *dev); + +int sdla_activate(struct device *slave, struct device *master) +{ + struct frad_local *flp; + int i; + + flp = slave->priv; + + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->master[i] == master) + break; + + if (i == CONFIG_DLCI_MAX) + return(-ENODEV); + + flp->dlci[i] = abs(flp->dlci[i]); + + if (slave->start && (flp->config.station == FRAD_STATION_NODE)) + sdla_cmd(slave, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL); + + return(0); +} + +int sdla_deactivate(struct device *slave, struct device *master) +{ + struct frad_local *flp; + int i; + + flp = slave->priv; + + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->master[i] == master) + break; + + if (i == CONFIG_DLCI_MAX) + return(-ENODEV); + + flp->dlci[i] = -abs(flp->dlci[i]); + + if (slave->start && (flp->config.station == FRAD_STATION_NODE)) + sdla_cmd(slave, SDLA_DEACTIVATE_DLCI, 0, 0, &flp->dlci[i], sizeof(short), NULL, NULL); + + return(0); +} + +int sdla_assoc(struct device *slave, struct device *master) +{ + struct frad_local *flp; + int i; + + if (master->type != ARPHRD_DLCI) + return(-EINVAL); + + flp = slave->priv; + + for(i=0;i<CONFIG_DLCI_MAX;i++) + { + if (!flp->master[i]) + break; + if (abs(flp->dlci[i]) == *(short *)(master->dev_addr)) + return(-EADDRINUSE); + } + + if (i == CONFIG_DLCI_MAX) + return(-EMLINK); /* #### Alan: Comments on this ?? */ + + MOD_INC_USE_COUNT; + + flp->master[i] = master; + flp->dlci[i] = -*(short *)(master->dev_addr); + master->mtu = slave->mtu; + + if (slave->start) + if (flp->config.station == FRAD_STATION_CPE) + sdla_reconfig(slave); + else + sdla_cmd(slave, SDLA_ADD_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL); + + return(0); +} + +int sdla_deassoc(struct device *slave, struct device *master) +{ + struct frad_local *flp; + int i; + + flp = slave->priv; + + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->master[i] == master) + break; + + if (i == CONFIG_DLCI_MAX) + return(-ENODEV); + + flp->master[i] = NULL; + flp->dlci[i] = 0; + + MOD_DEC_USE_COUNT; + + if (slave->start) + if (flp->config.station == FRAD_STATION_CPE) + sdla_reconfig(slave); + else + sdla_cmd(slave, SDLA_DELETE_DLCI, 0, 0, master->dev_addr, sizeof(short), NULL, NULL); + + return(0); +} + +int sdla_dlci_conf(struct device *slave, struct device *master, int get) +{ + struct frad_local *flp; + struct dlci_local *dlp; + int i; + short len, ret; + + flp = slave->priv; + + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->master[i] == master) + break; + + if (i == CONFIG_DLCI_MAX) + return(-ENODEV); + + dlp = master->priv; + + ret = SDLA_RET_OK; + len = sizeof(struct dlci_conf); + if (slave->start) + if (get) + ret = sdla_cmd(slave, SDLA_READ_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, + NULL, 0, &dlp->config, &len); + else + ret = sdla_cmd(slave, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, + &dlp->config, sizeof(struct dlci_conf) - 4 * sizeof(short), NULL, NULL); + + return(ret == SDLA_RET_OK ? 0 : -EIO); +} + +/************************** + * + * now for the Linux driver + * + **************************/ + +/* NOTE: the DLCI driver deals with freeing the SKB!! */ +static int sdla_transmit(struct sk_buff *skb, struct device *dev) +{ + struct frad_local *flp; + int ret, addr, accept; + short size; + unsigned long flags; + struct buf_entry *pbuf; + + flp = dev->priv; + ret = 0; + accept = 1; + + if (dev->tbusy) + return(1); + + if (skb == NULL) + return(0); + + if (set_bit(0, (void*)&dev->tbusy) != 0) + printk(KERN_WARNING "%s: transmitter access conflict.\n", dev->name); + else + { + /* + * stupid GateD insists on setting up the multicast router thru us + * and we're ill equipped to handle a non Frame Relay packet at this + * time! + */ + + accept = 1; + switch (dev->type) + { + case ARPHRD_FRAD: + if (skb->dev->type != ARPHRD_DLCI) + { + printk(KERN_WARNING "%s: Non DLCI device, type %i, tried to send on FRAD module.\n", dev->name, skb->dev->type); + accept = 0; + } + break; + + default: + printk(KERN_WARNING "%s: unknown firmware type 0x%4.4X\n", dev->name, dev->type); + accept = 0; + break; + } + + if (accept) + { + /* this is frame specific, but till there's a PPP module, it's the default */ + switch (flp->type) + { + case SDLA_S502A: + case SDLA_S502E: + ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, skb->data, skb->len, NULL, NULL); + break; + + case SDLA_S508: + size = sizeof(addr); + ret = sdla_cmd(dev, SDLA_INFORMATION_WRITE, *(short *)(skb->dev->dev_addr), 0, NULL, skb->len, &addr, &size); + if (ret == SDLA_RET_OK) + { + save_flags(flags); + cli(); + SDLA_WINDOW(dev, addr); + pbuf = (void *)(((int) dev->mem_start) + (addr & SDLA_ADDR_MASK)); + + sdla_write(dev, pbuf->buf_addr, skb->data, skb->len); + + SDLA_WINDOW(dev, addr); + pbuf->opp_flag = 1; + restore_flags(flags); + } + break; + } + + switch (ret) + { + case SDLA_RET_OK: + flp->stats.tx_packets++; + ret = DLCI_RET_OK; + break; + + case SDLA_RET_CIR_OVERFLOW: + case SDLA_RET_BUF_OVERSIZE: + case SDLA_RET_NO_BUFS: + flp->stats.tx_dropped++; + ret = DLCI_RET_DROP; + break; + + default: + flp->stats.tx_errors++; + ret = DLCI_RET_ERR; + break; + } + } + dev->tbusy = 0; + } + return(ret); +} + +static void sdla_receive(struct device *dev) +{ + struct device *master; + struct frad_local *flp; + struct dlci_local *dlp; + struct sk_buff *skb; + + struct sdla_cmd *cmd; + struct buf_info *pbufi; + struct buf_entry *pbuf; + + unsigned long flags; + int i, received, success, addr, buf_base, buf_top; + short dlci, len, len2, split; + + flp = dev->priv; + success = 1; + received = addr = buf_top = buf_base = 0; + len = dlci = 0; + skb = NULL; + master = NULL; + cmd = NULL; + pbufi = NULL; + pbuf = NULL; + + save_flags(flags); + cli(); + + switch (flp->type) + { + case SDLA_S502A: + case SDLA_S502E: + cmd = (void *) (dev->mem_start + (SDLA_502_RCV_BUF & SDLA_ADDR_MASK)); + SDLA_WINDOW(dev, SDLA_502_RCV_BUF); + success = cmd->opp_flag; + if (!success) + break; + + dlci = cmd->dlci; + len = cmd->length; + break; + + case SDLA_S508: + pbufi = (void *) (dev->mem_start + (SDLA_508_RXBUF_INFO & SDLA_ADDR_MASK)); + SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO); + pbuf = (void *) (dev->mem_start + ((pbufi->rse_base + flp->buffer * sizeof(struct buf_entry)) & SDLA_ADDR_MASK)); + success = pbuf->opp_flag; + if (!success) + break; + + buf_top = pbufi->buf_top; + buf_base = pbufi->buf_base; + dlci = pbuf->dlci; + len = pbuf->length; + addr = pbuf->buf_addr; + break; + } + + /* common code, find the DLCI and get the SKB */ + if (success) + { + for (i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i] == dlci) + break; + + if (i == CONFIG_DLCI_MAX) + { + printk(KERN_NOTICE "%s: Received packet from invalid DLCI %i, ignoring.", dev->name, dlci); + flp->stats.rx_errors++; + success = 0; + } + } + + if (success) + { + master = flp->master[i]; + skb = dev_alloc_skb(len + sizeof(struct frhdr)); + if (skb == NULL) + { + printk(KERN_NOTICE "%s: Memory squeeze, dropping packet.\n", dev->name); + flp->stats.rx_dropped++; + success = 0; + } + else + skb_reserve(skb, sizeof(struct frhdr)); + } + + /* pick up the data */ + switch (flp->type) + { + case SDLA_S502A: + case SDLA_S502E: + if (success) + sdla_read(dev, SDLA_502_RCV_BUF + SDLA_502_DATA_OFS, skb_put(skb,len), len); + + SDLA_WINDOW(dev, SDLA_502_RCV_BUF); + cmd->opp_flag = 0; + break; + + case SDLA_S508: + if (success) + { + /* is this buffer split off the end of the internal ring buffer */ + split = addr + len > buf_top + 1 ? len - (buf_top - addr + 1) : 0; + len2 = len - split; + + sdla_read(dev, addr, skb_put(skb, len2), len2); + if (split) + sdla_read(dev, buf_base, skb_put(skb, split), split); + } + + /* increment the buffer we're looking at */ + SDLA_WINDOW(dev, SDLA_508_RXBUF_INFO); + flp->buffer = (flp->buffer + 1) % pbufi->rse_num; + pbuf->opp_flag = 0; + break; + } + + if (success) + { + flp->stats.rx_packets++; + dlp = master->priv; + (*dlp->receive)(skb, master); + } + + restore_flags(flags); +} + +static void sdla_isr(int irq, void *dev_id, struct pt_regs * regs) +{ + struct device *dev; + struct frad_local *flp; + char byte; + + dev = irq2dev_map[irq]; + + if (dev == NULL) + { + printk(KERN_WARNING "sdla_isr(): irq %d for unknown device.\n", irq); + return; + } + + flp = dev->priv; + + if (!flp->initialized) + { + printk(KERN_WARNING "%s: irq %d for uninitialized device.\n", dev->name, irq); + return; + } + + dev->interrupt = 1; + byte = sdla_byte(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE); + switch (byte) + { + case SDLA_INTR_RX: + sdla_receive(dev); + break; + + /* the command will get an error return, which is processed above */ + case SDLA_INTR_MODEM: + case SDLA_INTR_STATUS: + sdla_cmd(dev, SDLA_READ_DLC_STATUS, 0, 0, NULL, 0, NULL, NULL); + break; + + case SDLA_INTR_TX: + case SDLA_INTR_COMPLETE: + case SDLA_INTR_TIMER: + printk(KERN_WARNING "%s: invalid irq flag 0x%02X.\n", dev->name, byte); + break; + } + + /* the S502E requires a manual acknowledgement of the interrupt */ + if (flp->type == SDLA_S502E) + { + flp->state &= ~SDLA_S502E_INTACK; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + flp->state |= SDLA_S502E_INTACK; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + } + + /* this clears the byte, informing the Z80 we're done */ + byte = 0; + sdla_write(dev, flp->type == SDLA_S508 ? SDLA_508_IRQ_INTERFACE : SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte)); + dev->interrupt = 0; +} + +static void sdla_poll(unsigned long device) +{ + struct device *dev; + struct frad_local *flp; + + dev = (struct device *) device; + flp = dev->priv; + + if (sdla_byte(dev, SDLA_502_RCV_BUF)) + sdla_receive(dev); + + flp->timer.expires = 1; + add_timer(&flp->timer); +} + +static int sdla_close(struct device *dev) +{ + struct frad_local *flp; + struct intr_info intr; + int len, i; + short dlcis[CONFIG_DLCI_MAX]; + + flp = dev->priv; + + len = 0; + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i]) + dlcis[len++] = abs(flp->dlci[i]); + len *= 2; + + if (flp->config.station == FRAD_STATION_NODE) + { + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i] > 0) + sdla_cmd(dev, SDLA_DEACTIVATE_DLCI, 0, 0, dlcis, len, NULL, NULL); + sdla_cmd(dev, SDLA_DELETE_DLCI, 0, 0, &flp->dlci[i], sizeof(flp->dlci[i]), NULL, NULL); + } + + memset(&intr, 0, sizeof(intr)); + /* let's start up the reception */ + switch(flp->type) + { + case SDLA_S502A: + del_timer(&flp->timer); + break; + + case SDLA_S502E: + sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL); + flp->state &= ~SDLA_S502E_INTACK; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + break; + + case SDLA_S507: + break; + + case SDLA_S508: + sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL); + flp->state &= ~SDLA_S508_INTEN; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + break; + } + + sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); + + dev->tbusy = 1; + dev->start = 0; + + MOD_DEC_USE_COUNT; + + return(0); +} + +struct conf_data { + struct frad_conf config; + short dlci[CONFIG_DLCI_MAX]; +}; + +static int sdla_open(struct device *dev) +{ + struct frad_local *flp; + struct dlci_local *dlp; + struct conf_data data; + struct intr_info intr; + int len, i; + char byte; + + flp = dev->priv; + + if (!flp->initialized) + return(-EPERM); + + if (!flp->configured) + return(-EPERM); + + /* time to send in the configuration */ + len = 0; + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i]) + data.dlci[len++] = abs(flp->dlci[i]); + len *= 2; + + memcpy(&data.config, &flp->config, sizeof(struct frad_conf)); + len += sizeof(struct frad_conf); + + sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); + sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL); + + if (flp->type == SDLA_S508) + flp->buffer = 0; + + sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); + + /* let's start up the reception */ + memset(&intr, 0, sizeof(intr)); + switch(flp->type) + { + case SDLA_S502A: + flp->timer.expires = 1; + add_timer(&flp->timer); + break; + + case SDLA_S502E: + flp->state |= SDLA_S502E_ENABLE; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + flp->state |= SDLA_S502E_INTACK; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + byte = 0; + sdla_write(dev, SDLA_502_IRQ_INTERFACE, &byte, sizeof(byte)); + intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM; + sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(char) + sizeof(short), NULL, NULL); + break; + + case SDLA_S507: + break; + + case SDLA_S508: + flp->state |= SDLA_S508_INTEN; + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + byte = 0; + sdla_write(dev, SDLA_508_IRQ_INTERFACE, &byte, sizeof(byte)); + intr.flags = SDLA_INTR_RX | SDLA_INTR_STATUS | SDLA_INTR_MODEM; + intr.irq = dev->irq; + sdla_cmd(dev, SDLA_SET_IRQ_TRIGGER, 0, 0, &intr, sizeof(struct intr_info), NULL, NULL); + break; + } + + if (flp->config.station == FRAD_STATION_CPE) + { + byte = SDLA_ICS_STATUS_ENQ; + sdla_cmd(dev, SDLA_ISSUE_IN_CHANNEL_SIGNAL, 0, 0, &byte, sizeof(byte), NULL, NULL); + } + else + { + sdla_cmd(dev, SDLA_ADD_DLCI, 0, 0, data.dlci, len - sizeof(struct frad_conf), NULL, NULL); + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i] > 0) + sdla_cmd(dev, SDLA_ACTIVATE_DLCI, 0, 0, &flp->dlci[i], 2*sizeof(flp->dlci[i]), NULL, NULL); + } + + /* configure any specific DLCI settings */ + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i]) + { + dlp = flp->master[i]->priv; + if (dlp->configured) + sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, abs(flp->dlci[i]), 0, &dlp->config, sizeof(struct dlci_conf), NULL, NULL); + } + + dev->tbusy = 0; + dev->interrupt = 0; + dev->start = 1; + + MOD_INC_USE_COUNT; + + return(0); +} + +static int sdla_config(struct device *dev, struct frad_conf *conf, int get) +{ + struct frad_local *flp; + struct conf_data data; + int i, err; + short size; + + if (dev->type == 0xFFFF) + return(-EUNATCH); + + flp = dev->priv; + + if (!get) + { + if (dev->start) + return(-EBUSY); + + err = verify_area(VERIFY_READ, conf, sizeof(struct frad_conf)); + if (err) + return(err); + + copy_from_user(&data.config, conf, sizeof(struct frad_conf)); + + if (data.config.station & ~FRAD_STATION_NODE) + return(-EINVAL); + + if (data.config.flags & ~FRAD_VALID_FLAGS) + return(-EINVAL); + + if ((data.config.kbaud < 0) || + ((data.config.kbaud > 128) && (flp->type != SDLA_S508))) + return(-EINVAL); + + if (data.config.clocking & ~(FRAD_CLOCK_INT | SDLA_S508_PORT_RS232)) + return(-EINVAL); + + if ((data.config.mtu < 0) || (data.config.mtu > SDLA_MAX_MTU)) + return(-EINVAL); + + if ((data.config.T391 < 5) || (data.config.T391 > 30)) + return(-EINVAL); + + if ((data.config.T392 < 5) || (data.config.T392 > 30)) + return(-EINVAL); + + if ((data.config.N391 < 1) || (data.config.N391 > 255)) + return(-EINVAL); + + if ((data.config.N392 < 1) || (data.config.N392 > 10)) + return(-EINVAL); + + if ((data.config.N393 < 1) || (data.config.N393 > 10)) + return(-EINVAL); + + memcpy(&flp->config, &data.config, sizeof(struct frad_conf)); + flp->config.flags |= SDLA_DIRECT_RECV; + + if (flp->type == SDLA_S508) + flp->config.flags |= SDLA_TX70_RX30; + + if (dev->mtu != flp->config.mtu) + { + /* this is required to change the MTU */ + dev->mtu = flp->config.mtu; + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->master[i]) + flp->master[i]->mtu = flp->config.mtu; + } + + flp->config.mtu += sizeof(struct frhdr); + + /* off to the races! */ + if (!flp->configured) + sdla_start(dev); + + flp->configured = 1; + } + else + { + err = verify_area(VERIFY_WRITE, conf, sizeof(struct frad_conf)); + if (err) + return(err); + + /* no sense reading if the CPU isn't started */ + if (dev->start) + { + size = sizeof(data); + if (sdla_cmd(dev, SDLA_READ_DLCI_CONFIGURATION, 0, 0, NULL, 0, &data, &size) != SDLA_RET_OK) + return(-EIO); + } + else + if (flp->configured) + memcpy(&data.config, &flp->config, sizeof(struct frad_conf)); + else + memset(&data.config, 0, sizeof(struct frad_conf)); + + memcpy(&flp->config, &data.config, sizeof(struct frad_conf)); + data.config.flags &= FRAD_VALID_FLAGS; + data.config.mtu -= data.config.mtu > sizeof(struct frhdr) ? sizeof(struct frhdr) : data.config.mtu; + copy_to_user(conf, &data.config, sizeof(struct frad_conf)); + } + + return(0); +} + +static int sdla_xfer(struct device *dev, struct sdla_mem *info, int read) +{ + struct sdla_mem mem; + int err; + char *temp; + + err = verify_area(VERIFY_READ, info, sizeof(struct sdla_mem)); + if (err) + return(err); + + copy_from_user(&mem, info, sizeof(mem)); + if (read) + { + err = verify_area(VERIFY_WRITE, mem.data, mem.len); + if (err) + return(err); + + temp = kmalloc(mem.len, GFP_KERNEL); + if (!temp) + return(-ENOMEM); + sdla_read(dev, mem.addr, temp, mem.len); + copy_to_user(mem.data, temp, mem.len); + kfree(temp); + } + else + { + err = verify_area(VERIFY_READ, mem.data, mem.len); + if (err) + return(err); + + temp = kmalloc(mem.len, GFP_KERNEL); + if (!temp) + return(-ENOMEM); + copy_from_user(temp, mem.data, mem.len); + sdla_write(dev, mem.addr, temp, mem.len); + kfree(temp); + } + return(0); +} + +static int sdla_reconfig(struct device *dev) +{ + struct frad_local *flp; + struct conf_data data; + int i, len; + + flp = dev->priv; + + len = 0; + for(i=0;i<CONFIG_DLCI_MAX;i++) + if (flp->dlci[i]) + data.dlci[len++] = flp->dlci[i]; + len *= 2; + + memcpy(&data, &flp->config, sizeof(struct frad_conf)); + len += sizeof(struct frad_conf); + + sdla_cmd(dev, SDLA_DISABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); + sdla_cmd(dev, SDLA_SET_DLCI_CONFIGURATION, 0, 0, &data, len, NULL, NULL); + sdla_cmd(dev, SDLA_ENABLE_COMMUNICATIONS, 0, 0, NULL, 0, NULL, NULL); + + return(0); +} + +static int sdla_ioctl(struct device *dev, struct ifreq *ifr, int cmd) +{ + struct frad_local *flp; + + flp = dev->priv; + + if (!flp->initialized) + return(-EPERM); + + switch (cmd) + { + case FRAD_GET_CONF: + case FRAD_SET_CONF: + return(sdla_config(dev, (struct frad_conf *)ifr->ifr_data, cmd == FRAD_GET_CONF)); + + case SDLA_IDENTIFY: + ifr->ifr_flags = flp->type; + break; + + case SDLA_CPUSPEED: + return(sdla_cpuspeed(dev, ifr)); + +/* ========================================================== +NOTE: This is rather a useless action right now, as the + current driver does not support protocols other than + FR. However, Sangoma has modules for a number of + other protocols in the works. +============================================================*/ + case SDLA_PROTOCOL: + if (flp->configured) + return(-EALREADY); + + switch (ifr->ifr_flags) + { + case ARPHRD_FRAD: + dev->type = ifr->ifr_flags; + dev->family = AF_UNSPEC; + break; + + default: + return(-ENOPROTOOPT); + } + break; + + case SDLA_CLEARMEM: + sdla_clear(dev); + break; + + case SDLA_WRITEMEM: + case SDLA_READMEM: + return(sdla_xfer(dev, (struct sdla_mem *)ifr->ifr_data, cmd == SDLA_READMEM)); + + case SDLA_START: + sdla_start(dev); + break; + + case SDLA_STOP: + sdla_stop(dev); + break; + + default: + return(-EOPNOTSUPP); + } + return(0); +} + +int sdla_change_mtu(struct device *dev, int new_mtu) +{ + struct frad_local *flp; + + flp = dev->priv; + + if (dev->start) + return(-EBUSY); + + /* for now, you can't change the MTU! */ + return(-EACCES); +} + +int sdla_set_config(struct device *dev, struct ifmap *map) +{ + struct frad_local *flp; + int i; + char byte; + + flp = dev->priv; + + if (flp->initialized) + return(-EINVAL); + + for(i=0;i < sizeof(valid_port) / sizeof (int) ; i++) + if (valid_port[i] == map->base_addr) + break; + + if (i == sizeof(valid_port) / sizeof(int)) + return(-EINVAL); + + dev->base_addr = map->base_addr; + request_region(dev->base_addr, SDLA_IO_EXTENTS, dev->name); + + /* test for card types, S502A, S502E, S507, S508 */ + /* these tests shut down the card completely, so clear the state */ + flp->type = SDLA_UNKNOWN; + flp->state = 0; + + for(i=1;i<SDLA_IO_EXTENTS;i++) + if (inb(dev->base_addr + i) != 0xFF) + break; + + if (i == SDLA_IO_EXTENTS) + { + outb(SDLA_HALT, dev->base_addr + SDLA_REG_Z80_CONTROL); + if ((inb(dev->base_addr + SDLA_S502_STS) & 0x0F) == 0x08) + { + outb(SDLA_S502E_INTACK, dev->base_addr + SDLA_REG_CONTROL); + if ((inb(dev->base_addr + SDLA_S502_STS) & 0x0F) == 0x0C) + { + outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL); + flp->type = SDLA_S502E; + } + } + } + + if (flp->type == SDLA_UNKNOWN) + { + for(byte=inb(dev->base_addr),i=0;i<SDLA_IO_EXTENTS;i++) + if (inb(dev->base_addr + i) != byte) + break; + + if (i == SDLA_IO_EXTENTS) + { + outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL); + if ((inb(dev->base_addr + SDLA_S502_STS) & 0x7E) == 0x30) + { + outb(SDLA_S507_ENABLE, dev->base_addr + SDLA_REG_CONTROL); + if ((inb(dev->base_addr + SDLA_S502_STS) & 0x7E) == 0x32) + { + outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL); + flp->type = SDLA_S507; + } + } + } + } + + if (flp->type == SDLA_UNKNOWN) + { + outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL); + if ((inb(dev->base_addr + SDLA_S508_STS) & 0x3F) == 0x00) + { + outb(SDLA_S508_INTEN, dev->base_addr + SDLA_REG_CONTROL); + if ((inb(dev->base_addr + SDLA_S508_STS) & 0x3F) == 0x10) + { + outb(SDLA_HALT, dev->base_addr + SDLA_REG_CONTROL); + flp->type = SDLA_S508; + } + } + } + + if (flp->type == SDLA_UNKNOWN) + { + outb(SDLA_S502A_HALT, dev->base_addr + SDLA_REG_CONTROL); + if (inb(dev->base_addr + SDLA_S502_STS) == 0x40) + { + outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL); + if (inb(dev->base_addr + SDLA_S502_STS) == 0x40) + { + outb(SDLA_S502A_INTEN, dev->base_addr + SDLA_REG_CONTROL); + if (inb(dev->base_addr + SDLA_S502_STS) == 0x44) + { + outb(SDLA_S502A_START, dev->base_addr + SDLA_REG_CONTROL); + flp->type = SDLA_S502A; + } + } + } + } + + if (flp->type == SDLA_UNKNOWN) + { + printk(KERN_NOTICE "%s: Unknown card type\n", dev->name); + return(-ENODEV); + } + + switch(dev->base_addr) + { + case 0x270: + case 0x280: + case 0x380: + case 0x390: + if ((flp->type != SDLA_S508) && (flp->type != SDLA_S507)) + return(-EINVAL); + } + + switch (map->irq) + { + case 2: + if (flp->type != SDLA_S502E) + return(-EINVAL); + break; + + case 10: + case 11: + case 12: + case 15: + case 4: + if ((flp->type != SDLA_S508) && (flp->type != SDLA_S507)) + return(-EINVAL); + + case 3: + case 5: + case 7: + if (flp->type == SDLA_S502A) + return(-EINVAL); + break; + + default: + return(-EINVAL); + } + dev->irq = map->irq; + + if (request_irq(dev->irq, &sdla_isr, 0, dev->name, NULL)) + return(-EADDRINUSE); + + irq2dev_map[dev->irq] = dev; + + if (flp->type == SDLA_S507) + { + switch(dev->irq) + { + case 3: + flp->state = SDLA_S507_IRQ3; + break; + case 4: + flp->state = SDLA_S507_IRQ4; + break; + case 5: + flp->state = SDLA_S507_IRQ5; + break; + case 7: + flp->state = SDLA_S507_IRQ7; + break; + case 10: + flp->state = SDLA_S507_IRQ10; + break; + case 11: + flp->state = SDLA_S507_IRQ11; + break; + case 12: + flp->state = SDLA_S507_IRQ12; + break; + case 15: + flp->state = SDLA_S507_IRQ15; + break; + } + } + + for(i=0;i < sizeof(valid_mem) / sizeof (int) ; i++) + if (valid_mem[i] == map->mem_start) + break; + + if (i == sizeof(valid_mem) / sizeof(int)) + return(-EINVAL); + + if ((flp->type == SDLA_S502A) && (((map->mem_start & 0xF000) >> 12) == 0x0E)) + return(-EINVAL); + + if ((flp->type != SDLA_S507) && ((map->mem_start >> 16) == 0x0B)) + return(-EINVAL); + + if ((flp->type == SDLA_S507) && ((map->mem_start >> 16) == 0x0D)) + return(-EINVAL); + + dev->mem_start = map->mem_start; + dev->mem_end = dev->mem_start + 0x2000; + + byte = flp->type != SDLA_S508 ? SDLA_8K_WINDOW : 0; + byte |= (map->mem_start & 0xF000) >> (12 + (flp->type == SDLA_S508 ? 1 : 0)); + switch(flp->type) + { + case SDLA_S502A: + case SDLA_S502E: + switch (map->mem_start >> 16) + { + case 0x0A: + byte |= SDLA_S502_SEG_A; + break; + case 0x0C: + byte |= SDLA_S502_SEG_C; + break; + case 0x0D: + byte |= SDLA_S502_SEG_D; + break; + case 0x0E: + byte |= SDLA_S502_SEG_E; + break; + } + break; + case SDLA_S507: + switch (map->mem_start >> 16) + { + case 0x0A: + byte |= SDLA_S507_SEG_A; + break; + case 0x0B: + byte |= SDLA_S507_SEG_B; + break; + case 0x0C: + byte |= SDLA_S507_SEG_C; + break; + case 0x0E: + byte |= SDLA_S507_SEG_E; + break; + } + break; + case SDLA_S508: + switch (map->mem_start >> 16) + { + case 0x0A: + byte |= SDLA_S508_SEG_A; + break; + case 0x0C: + byte |= SDLA_S508_SEG_C; + break; + case 0x0D: + byte |= SDLA_S508_SEG_D; + break; + case 0x0E: + byte |= SDLA_S508_SEG_E; + break; + } + break; + } + + /* set the memory bits, and enable access */ + outb(byte, dev->base_addr + SDLA_REG_PC_WINDOW); + switch(flp->type) + { + case SDLA_S502E: + flp->state = SDLA_S502E_ENABLE; + break; + case SDLA_S507: + flp->state |= SDLA_MEMEN; + break; + case SDLA_S508: + flp->state = SDLA_MEMEN; + break; + } + outb(flp->state, dev->base_addr + SDLA_REG_CONTROL); + + flp->initialized = 1; + return(0); +} + +static struct enet_statistics *sdla_stats(struct device *dev) +{ + struct frad_local *flp; + + flp = dev->priv; + + return(&flp->stats); +} + +int sdla_init(struct device *dev) +{ + struct frad_local *flp; + int i; + + /* allocate the private data structure */ + flp = kmalloc(sizeof(struct frad_local), GFP_KERNEL); + if (!flp) + return(-ENOMEM); + + memset(flp, 0, sizeof(struct frad_local)); + dev->priv = flp; + + dev->flags = 0; + dev->open = sdla_open; + dev->stop = sdla_close; + dev->do_ioctl = sdla_ioctl; + dev->set_config = sdla_set_config; + dev->get_stats = sdla_stats; + dev->hard_start_xmit = sdla_transmit; + dev->change_mtu = sdla_change_mtu; + + dev->type = 0xFFFF; + dev->family = AF_UNSPEC; + dev->pa_alen = 0; + dev->pa_addr = 0; + dev->pa_dstaddr = 0; + dev->pa_brdaddr = 0; + dev->pa_mask = 0; + dev->hard_header_len = 0; + dev->addr_len = 0; + dev->mtu = SDLA_MAX_MTU; + + for (i = 0; i < DEV_NUMBUFFS; i++) + skb_queue_head_init(&dev->buffs[i]); + + flp->activate = sdla_activate; + flp->deactivate = sdla_deactivate; + flp->assoc = sdla_assoc; + flp->deassoc = sdla_deassoc; + flp->dlci_conf = sdla_dlci_conf; + + init_timer(&flp->timer); + flp->timer.expires = 1; + flp->timer.data = (unsigned long) dev; + flp->timer.function = sdla_poll; + + return(0); +} + +void sdla_setup(void) +{ + printk("%s.\n", version); + register_frad(devname); +} + +#ifdef MODULE +static struct device sdla0 = {"sdla0", 0, 0, 0, 0, 0, 0, 0, 0, 0, NULL, sdla_init}; + +int init_module(void) +{ + int result; + + sdla_setup(); + if ((result = register_netdev(&sdla0)) != 0) + return result; + + return 0; +} + +void cleanup_module(void) +{ + unregister_netdev(&sdla0); + if (sdla0.priv) + kfree(sdla0.priv); + if (sdla0.irq) + free_irq(sdla0.irq, NULL); +} +#endif /* MODULE */ |