diff options
Diffstat (limited to 'drivers/net/tulip/timer.c')
-rw-r--r-- | drivers/net/tulip/timer.c | 208 |
1 files changed, 208 insertions, 0 deletions
diff --git a/drivers/net/tulip/timer.c b/drivers/net/tulip/timer.c new file mode 100644 index 000000000..796fdd136 --- /dev/null +++ b/drivers/net/tulip/timer.c @@ -0,0 +1,208 @@ +/* + drivers/net/tulip/timer.c + + Maintained by Jeff Garzik <jgarzik@mandrakesoft.com> + Copyright 2000 The Linux Kernel Team + Written/copyright 1994-1999 by Donald Becker. + + This software may be used and distributed according to the terms + of the GNU Public License, incorporated herein by reference. + + Please refer to Documentation/networking/tulip.txt for more + information on this driver. + +*/ + +#include "tulip.h" +#include <asm/io.h> + + +void tulip_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = (struct tulip_private *)dev->priv; + long ioaddr = dev->base_addr; + u32 csr12 = inl(ioaddr + CSR12); + int next_tick = 2*HZ; + + if (tulip_debug > 2) { + printk(KERN_DEBUG "%s: Media selection tick, %s, status %8.8x mode" + " %8.8x SIA %8.8x %8.8x %8.8x %8.8x.\n", + dev->name, medianame[dev->if_port], inl(ioaddr + CSR5), + inl(ioaddr + CSR6), csr12, inl(ioaddr + CSR13), + inl(ioaddr + CSR14), inl(ioaddr + CSR15)); + } + switch (tp->chip_id) { + case DC21040: + if (!tp->medialock && csr12 & 0x0002) { /* Network error */ + printk(KERN_INFO "%s: No link beat found.\n", + dev->name); + dev->if_port = (dev->if_port == 2 ? 0 : 2); + tulip_select_media(dev, 0); + dev->trans_start = jiffies; + } + break; + case DC21041: + if (tulip_debug > 2) + printk(KERN_DEBUG "%s: 21041 media tick CSR12 %8.8x.\n", + dev->name, csr12); + if (tp->medialock) break; + switch (dev->if_port) { + case 0: case 3: case 4: + if (csr12 & 0x0004) { /*LnkFail */ + /* 10baseT is dead. Check for activity on alternate port. */ + tp->mediasense = 1; + if (csr12 & 0x0200) + dev->if_port = 2; + else + dev->if_port = 1; + printk(KERN_INFO "%s: No 21041 10baseT link beat, Media switched to %s.\n", + dev->name, medianame[dev->if_port]); + outl(0, ioaddr + CSR13); /* Reset */ + outl(t21041_csr14[dev->if_port], ioaddr + CSR14); + outl(t21041_csr15[dev->if_port], ioaddr + CSR15); + outl(t21041_csr13[dev->if_port], ioaddr + CSR13); + next_tick = 10*HZ; /* 2.4 sec. */ + } else + next_tick = 30*HZ; + break; + case 1: /* 10base2 */ + case 2: /* AUI */ + if (csr12 & 0x0100) { + next_tick = (30*HZ); /* 30 sec. */ + tp->mediasense = 0; + } else if ((csr12 & 0x0004) == 0) { + printk(KERN_INFO "%s: 21041 media switched to 10baseT.\n", + dev->name); + dev->if_port = 0; + tulip_select_media(dev, 0); + next_tick = (24*HZ)/10; /* 2.4 sec. */ + } else if (tp->mediasense || (csr12 & 0x0002)) { + dev->if_port = 3 - dev->if_port; /* Swap ports. */ + tulip_select_media(dev, 0); + next_tick = 20*HZ; + } else { + next_tick = 20*HZ; + } + break; + } + break; + case DC21140: case DC21142: case MX98713: case COMPEX9881: default: { + struct medialeaf *mleaf; + unsigned char *p; + if (tp->mtable == NULL) { /* No EEPROM info, use generic code. */ + /* Not much that can be done. + Assume this a generic MII or SYM transceiver. */ + next_tick = 60*HZ; + if (tulip_debug > 2) + printk(KERN_DEBUG "%s: network media monitor CSR6 %8.8x " + "CSR12 0x%2.2x.\n", + dev->name, inl(ioaddr + CSR6), csr12 & 0xff); + break; + } + mleaf = &tp->mtable->mleaf[tp->cur_index]; + p = mleaf->leafdata; + switch (mleaf->type) { + case 0: case 4: { + /* Type 0 serial or 4 SYM transceiver. Check the link beat bit. */ + int offset = mleaf->type == 4 ? 5 : 2; + s8 bitnum = p[offset]; + if (p[offset+1] & 0x80) { + if (tulip_debug > 1) + printk(KERN_DEBUG"%s: Transceiver monitor tick " + "CSR12=%#2.2x, no media sense.\n", + dev->name, csr12); + if (mleaf->type == 4) { + if (mleaf->media == 3 && (csr12 & 0x02)) + goto select_next_media; + } + break; + } + if (tulip_debug > 2) + printk(KERN_DEBUG "%s: Transceiver monitor tick: CSR12=%#2.2x" + " bit %d is %d, expecting %d.\n", + dev->name, csr12, (bitnum >> 1) & 7, + (csr12 & (1 << ((bitnum >> 1) & 7))) != 0, + (bitnum >= 0)); + /* Check that the specified bit has the proper value. */ + if ((bitnum < 0) != + ((csr12 & (1 << ((bitnum >> 1) & 7))) != 0)) { + if (tulip_debug > 1) + printk(KERN_DEBUG "%s: Link beat detected for %s.\n", dev->name, + medianame[mleaf->media]); + if ((p[2] & 0x61) == 0x01) /* Bogus Znyx board. */ + goto actually_mii; + break; + } + if (tp->medialock) + break; + select_next_media: + if (--tp->cur_index < 0) { + /* We start again, but should instead look for default. */ + tp->cur_index = tp->mtable->leafcount - 1; + } + dev->if_port = tp->mtable->mleaf[tp->cur_index].media; + if (tulip_media_cap[dev->if_port] & MediaIsFD) + goto select_next_media; /* Skip FD entries. */ + if (tulip_debug > 1) + printk(KERN_DEBUG "%s: No link beat on media %s," + " trying transceiver type %s.\n", + dev->name, medianame[mleaf->media & 15], + medianame[tp->mtable->mleaf[tp->cur_index].media]); + tulip_select_media(dev, 0); + /* Restart the transmit process. */ + tulip_outl_CSR6(tp, tp->csr6 | 0x0002); + tulip_outl_CSR6(tp, tp->csr6 | 0x2002); + next_tick = (24*HZ)/10; + break; + } + case 1: case 3: /* 21140, 21142 MII */ + actually_mii: + tulip_check_duplex(dev); + next_tick = 60*HZ; + break; + case 2: /* 21142 serial block has no link beat. */ + default: + break; + } + } + break; + } + tp->timer.expires = RUN_AT(next_tick); + add_timer(&tp->timer); +} + + +void mxic_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = (struct tulip_private *)dev->priv; + long ioaddr = dev->base_addr; + int next_tick = 60*HZ; + + if (tulip_debug > 3) { + printk(KERN_INFO"%s: MXIC negotiation status %8.8x.\n", dev->name, + inl(ioaddr + CSR12)); + } + if (next_tick) { + tp->timer.expires = RUN_AT(next_tick); + add_timer(&tp->timer); + } +} + + +void comet_timer(unsigned long data) +{ + struct net_device *dev = (struct net_device *)data; + struct tulip_private *tp = (struct tulip_private *)dev->priv; + long ioaddr = dev->base_addr; + int next_tick = 60*HZ; + + if (tulip_debug > 1) + printk(KERN_DEBUG "%s: Comet link status %4.4x partner capability " + "%4.4x.\n", + dev->name, inl(ioaddr + 0xB8), inl(ioaddr + 0xC8)); + tp->timer.expires = RUN_AT(next_tick); + add_timer(&tp->timer); +} + |