diff options
Diffstat (limited to 'drivers/sound/lowlevel/README.aedsp16')
| -rw-r--r-- | drivers/sound/lowlevel/README.aedsp16 | 31 |
1 files changed, 31 insertions, 0 deletions
diff --git a/drivers/sound/lowlevel/README.aedsp16 b/drivers/sound/lowlevel/README.aedsp16 index 7b61363a3..8f5b05afd 100644 --- a/drivers/sound/lowlevel/README.aedsp16 +++ b/drivers/sound/lowlevel/README.aedsp16 @@ -20,6 +20,37 @@ I you own a Gallant's audio card based on SC-6600, activate the SC-6600 support. If you want to change the configuration of the sound board, be sure to check off all the configuration items before re-configure it. +Module parameters +----------------- +To use this driver as a module, you must configure some module parameters, to +set up I/O addresses, IRQ lines and DMA channels. Some parameters are +mandatory while some others are optional. Here a list of parameters you can +use with this module: + +Name Description +==== =========== +MANDATORY +io I/O base address (0x220 or 0x240) +irq irq line (5, 7, 9, 10 or 11) +dma dma channel (0, 1 or 3) + +OPTIONAL +mss_base I/O base address for activate MSS mode (default SBPRO) + (0x530 or 0xE80) +mpu_base I/O base address for activate MPU-401 mode + (0x300, 0x310, 0x320 or 0x330) +mpu_irq MPU-401 irq line (5, 7, 9, 10 or 0) + +The /etc/conf.modules will have a line like this: + +options aedsp16 io=0x220 irq=10 dma=3 mss_base=0x530 + +Of course, you must write the 'options' for all other subsequent modules, +opl3, ad1848, adlib_card, sb + +Then you must load the sound modules stack in this order: +sound -> aedsp16 -> [ ad1848, opl3 ] + Sound cards supported --------------------- This driver supports the SC-6000 and SC-6600 based Gallant's sound card. |