diff options
Diffstat (limited to 'include/net/irda/w83977af_ir.h')
| -rw-r--r-- | include/net/irda/w83977af_ir.h | 158 |
1 files changed, 158 insertions, 0 deletions
diff --git a/include/net/irda/w83977af_ir.h b/include/net/irda/w83977af_ir.h new file mode 100644 index 000000000..3e3200b2d --- /dev/null +++ b/include/net/irda/w83977af_ir.h @@ -0,0 +1,158 @@ +/********************************************************************* + * + * Filename: w83977af_ir.h + * Version: + * Description: + * Status: Experimental. + * Author: Paul VanderSpek + * Created at: Thu Nov 19 13:55:34 1998 + * Modified at: Thu Dec 10 14:06:18 1998 + * Modified by: Dag Brattli <dagb@cs.uit.no> + * + * Copyright (c) 1998 Dag Brattli, All Rights Reserved. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * Neither Dag Brattli nor University of Tromsų admit liability nor + * provide warranty for any of this software. This material is + * provided "AS-IS" and at no charge. + * + ********************************************************************/ + +#ifndef W83977AF_IR_H +#define W83977AF_IR_H + +#include <asm/io.h> + +/* Flags for configuration register CRF0 */ +#define ENBNKSEL 0x01 +#define APEDCRC 0x02 +#define TXW4C 0x04 +#define RXW4C 0x08 + +/* Bank 0 */ +#define RBR 0x00 /* Receiver buffer register */ +#define TBR 0x00 /* Transmitter buffer register */ + +#define ICR 0x01 /* Interrupt configuration register */ +#define ICR_ERBRI 0x01 /* Receiver buffer register interrupt */ +#define ICR_ETBREI 0x02 /* Transeiver empty interrupt */ +#define ICR_EUSRI 0x04//* IR status interrupt */ +#define ICR_EHSRI 0x04 +#define ICR_ETXURI 0x04 /* Tx underrun */ +#define ICR_EDMAI 0x10 /* DMA interrupt */ +#define ICR_ETXTHI 0x20 /* Transmitter threshold interrupt */ +#define ICR_EFSFI 0x40 /* Frame status FIFO interrupt */ +#define ICR_ETMRI 0x80 /* Timer interrupt */ + +#define UFR 0x02 /* FIFO control register */ +#define UFR_EN_FIFO 0x01 /* Enable FIFO's */ +#define UFR_RXF_RST 0x02 /* Reset Rx FIFO */ +#define UFR_TXF_RST 0x04 /* Reset Tx FIFO */ +#define UFR_RXTL 0x80 /* Rx FIFO threshold (set to 16) */ +#define UFR_TXTL 0x20 /* Tx FIFO threshold (set to 17) */ + +#define ISR 0x02 /* Interrupt status register */ +#define ISR_RXTH_I 0x01 /* Receive threshold interrupt */ +#define ISR_TXEMP_I 0x02 /* Transmitter empty interrupt */ +#define ISR_FEND_I 0x04 +#define ISR_DMA_I 0x10 +#define ISR_TXTH_I 0x20 /* Transmitter threshold interrupt */ +#define ISR_FSF_I 0x40 +#define ISR_TMR_I 0x80 /* Timer interrupt */ + +#define UCR 0x03 /* Uart control register */ +#define UCR_DLS8 0x03 /* 8N1 */ + +#define SSR 0x03 /* Sets select register */ +#define SET0 UCR_DLS8 /* Make sure we keep 8N1 */ +#define SET1 (0x80|UCR_DLS8) /* Make sure we keep 8N1 */ +#define SET2 0xE0 +#define SET3 0xE4 +#define SET4 0xE8 +#define SET5 0xEC +#define SET6 0xF0 +#define SET7 0xF4 + +#define HCR 0x04 +#define HCR_MODE_MASK ~(0xD0) +#define HCR_SIR 0x60 +#define HCR_MIR_576 0x20 +#define HCR_MIR_1152 0x80 +#define HCR_FIR 0xA0 +#define HCR_EN_DMA 0x04 +#define HCR_EN_IRQ 0x08 +#define HCR_TX_WT 0x08 + +#define USR 0x05 /* IR status register */ +#define USR_RDR 0x01 /* Receive data ready */ +#define USR_TSRE 0x40 /* Transmitter empty? */ + +#define AUDR 0x07 +#define AUDR_SFEND 0x08 /* Set a frame end */ +#define AUDR_RXBSY 0x20 /* Rx busy */ +#define AUDR_UNDR 0x40 /* Transeiver underrun */ + +/* Set 2 */ +#define ABLL 0x00 /* Advanced baud rate divisor latch (low byte) */ +#define ABHL 0x01 /* Advanced baud rate divisor latch (high byte) */ + +#define ADCR1 0x02 +#define ADCR1_ADV_SL 0x01 +#define ADCR1_D_CHSW 0x08 /* the specs are wrong. its bit 3, not 4 */ +#define ADCR1_DMA_F 0x02 + +#define ADCR2 0x04 +#define ADCR2_TXFS32 0x01 +#define ADCR2_RXFS32 0x04 + +#define RXFDTH 0x07 + +/* Set 3 */ +#define AUID 0x00 + +/* Set 4 */ +#define TMRL 0x00 /* Timer value register (low byte) */ +#define TMRH 0x01 /* Timer value register (high byte) */ + +#define IR_MSL 0x02 /* Infrared mode select */ +#define IR_MSL_EN_TMR 0x01 /* Enable timer */ + +#define TFRLL 0x04 /* Transmitter frame length (low byte) */ +#define TFRLH 0x05 /* Transmitter frame length (high byte) */ +#define RFRLL 0x06 /* Receiver frame length (low byte) */ +#define RFRLH 0x07 /* Receiver frame length (high byte) */ + +/* Set 5 */ + +#define FS_FO 0x05 /* Frame status FIFO */ +#define FS_FO_FSFDR 0x80 /* Frame status FIFO data ready */ +#define FS_FO_LST_FR 0x40 /* Frame lost */ +#define FS_FO_MX_LEX 0x10 /* Max frame len exceeded */ +#define FS_FO_PHY_ERR 0x08 /* Physical layer error */ +#define FS_FO_CRC_ERR 0x04 +#define FS_FO_RX_OV 0x02 /* Receive overrun */ +#define FS_FO_FSF_OV 0x01 /* Frame status FIFO overrun */ +#define FS_FO_ERR_MSK 0x5f /* Error mask */ + +#define RFLFL 0x06 +#define RFLFH 0x07 + +/* Set 6 */ +#define IR_CFG2 0x00 +#define IR_CFG2_DIS_CRC 0x02 + +/* Set 7 */ +#define IRM_CR 0x07 /* Infrared module control register */ +#define IRM_CR_IRX_MSL 0x40 +#define IRM_CR_AF_MNT 0x80 /* Automatic format */ + +static inline void switch_bank( int iobase, int set) +{ + outb( set, iobase+SSR); +} + +#endif |