From 03ba4131783cc9e872f8bb26a03f15bc11f27564 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 19 Sep 1998 19:15:08 +0000 Subject: - Merge with Linux 2.1.121. - Bugfixes. --- Documentation/Configure.help | 108 +++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 108 insertions(+) (limited to 'Documentation/Configure.help') diff --git a/Documentation/Configure.help b/Documentation/Configure.help index 7f6d6fd18..91b3320ed 100644 --- a/Documentation/Configure.help +++ b/Documentation/Configure.help @@ -4376,6 +4376,58 @@ CONFIG_WAVELAN module, say M here and read Documentation/modules.txt as well as Documentation/networking/net-modules.txt. +AIMSlab RadioTrack (aka RadioReveal) support +CONFIG_RADIO_RTRACK + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video for Linux API. Information on + this API and pointers to "v4l" programs may be found on the WWW at + http://roadrunner.swansea.uk.linux.org/v4l.shtml; to browse the WWW, + you need to have access to a machine on the Internet that has a + program like lynx or netscape. + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read Documentation/modules.txt. The module will be + called radio-aimslab.o. + +RadioTrack i/o port +CONFIG_RADIO_RTRACK_PORT + Enter either 0x30f or 0x20f here. The card default is 0x30f, if you + haven't changed the jumper setting on the card. + +Aztech/Packard Bell Radio +CONFIG_RADIO_AZTECH + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read Documentation/modules.txt. The module will be + called radio-aztech.o. + +Aztech/Packard Bell radio card i/o port +CONFIG_RADIO_AZTECH_PORT + Enter either 0x350 or 0x358 here. The card default is 0x350, if you + haven't changed the setting of jumper JP3 on the card. Removing the + jumper sets the card to 0x358. + +SF16FMI Radio +CONFIG_RADIO_SF16FMI + Choose Y here if you have one of these FM radio cards, and then fill + in the port address below. + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read Documentation/modules.txt. The module will be + called radio-sf16fmi.o + +SF16FMI I/O port (0x284 or 0x384) +CONFIG_RADIO_SF16FMI_PORT + Enter the I/O port of your SF16FMI radio card. + LAPB over Ethernet driver CONFIG_LAPBETHER This is a driver for a pseudo device (typically called /dev/lapb0) @@ -6452,6 +6504,18 @@ CONFIG_ROMFS_FS If you don't know whether you need it, then you don't need it: say N. +QNX filesystem support (EXPERIMENTAL) +CONFIG_QNX4FS_FS + This is the filesystem used by QNX 4. Say Y if you intend to mount + QNX hard disks and floppies. + + This filesystem support is also available as a module ( = code which + can be inserted in and removed from the running kernel whenever you + want). The module is called qnx4.o. If you want to compile it as a + module, say M here and read Documentation/modules.txt. + + If unsure, say N. + Kernel automounter support CONFIG_AUTOFS_FS The automounter is a tool to automatically mount remote filesystems @@ -8234,6 +8298,24 @@ CONFIG_MSNDPIN_PERM_FILE obtained from Turtle Beach. See Documentation/sound/MultiSound for information on how to obtain this. +MSND Pinnacle Non-PnP Mode +CONFIG_MSNDPIN_NONPNP + The Pinnacle and Fiji card resources can be configured either with + PnP, or through a configuration port. For the Pinnacle, + configuration in non-PnP mode allows use of the IDE and joystick + peripherals on the card as well, since they do not show up when the + card is in PnP mode. Specifying zero for any resource of a device + will disable the device. If you are running the card in PnP mode, + you must say N here and use isapnptools to configure the card's + resources. + +MSND Pinnacle Config Port +CONFIG_MSNDPIN_CFG + This is the port which the Pinnacle and Fiji uses to configure + the card's resources when not in PnP mode. If your card is in + PnP mode, then be sure to say N to the previous option, + CONFIG_MSNDPIN_NONPNP. + /dev/dsp and /dev/audio support CONFIG_SOUND_AUDIO Answering N disables /dev/dsp and /dev/audio, the A/D and D/A @@ -9270,6 +9352,10 @@ CONFIG_RADIO_RTRACK Choose Y here if you have one of these FM radio cards, and then fill in the port address below. + Note that newer AIMSlab RadioTrack cards have a different chipset, + not supported by this driver. For these cards, use the RadioTrack II + driver below. + In order to control your radio card, you will need to use programs that are compatible with the Video for Linux API. Information on this API and pointers to "v4l" programs may be found on the WWW at @@ -9287,6 +9373,28 @@ CONFIG_RADIO_RTRACK_PORT Enter either 0x30f or 0x20f here. The card default is 0x30f, if you haven't changed the jumper setting on the card. +AIMSlab RadioTrack II support +CONFIG_RADIO_RTRACK2 + Choose Y here if you have this FM radio card, and then fill in the + port address below. + + In order to control your radio card, you will need to use programs + that are compatible with the Video for Linux API. Information on + this API and pointers to "v4l" programs may be found on the WWW at + http://roadrunner.swansea.uk.linux.org/v4l.shtml; to browse the WWW, + you need to have access to a machine on the Internet that has a + program like lynx or netscape. + + If you want to compile this driver as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read Documentation/modules.txt. The module will be + called radio-rtrack2.o. + +RadioTrack II i/o port +CONFIG_RADIO_RTRACK2_PORT + Enter either 0x30c or 0x20c here. The card default is 0x30c, if you + haven't changed the jumper setting on the card. + Aztech/Packard Bell Radio CONFIG_RADIO_AZTECH Choose Y here if you have one of these FM radio cards, and then fill -- cgit v1.2.3