From 99a7e12f34b3661a0d1354eef83a0eef4df5e34c Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Sat, 5 Feb 2000 06:47:02 +0000 Subject: Merge with Linux 2.3.38. --- drivers/usb/uhci.h | 355 ++++++++++++++++++++--------------------------------- 1 file changed, 136 insertions(+), 219 deletions(-) (limited to 'drivers/usb/uhci.h') diff --git a/drivers/usb/uhci.h b/drivers/usb/uhci.h index 7433a9967..d8ef7f038 100644 --- a/drivers/usb/uhci.h +++ b/drivers/usb/uhci.h @@ -1,13 +1,11 @@ #ifndef __LINUX_UHCI_H #define __LINUX_UHCI_H -#include - -#include "usb.h" - /* - * Universal Host Controller Interface data structures and defines + $Id: uhci.h,v 1.30 1999/12/15 17:57:25 fliegl Exp $ */ +#define MODNAME "usb-uhci" +#define VERSTR "version v0.9 time " __TIME__ " " __DATE__ /* Command register */ #define USBCMD 0 @@ -55,7 +53,7 @@ /* Legacy support register */ #define USBLEGSUP 0xc0 -#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ +#define USBLEGSUP_DEFAULT 0x2000 /* only PIRQ enable set */ #define UHCI_NULL_DATA_SIZE 0x7ff /* for UHCI controller TD */ @@ -68,27 +66,6 @@ #define UHCI_MAX_SOF_NUMBER 2047 /* in an SOF packet */ #define CAN_SCHEDULE_FRAMES 1000 /* how far future frames can be scheduled */ -struct uhci_td; - -struct uhci_qh { - /* Hardware fields */ - __u32 link; /* Next queue */ - __u32 element; /* Queue element pointer */ - - /* Software fields */ - atomic_t refcnt; /* Reference counting */ - struct uhci_device *dev; /* The owning device */ - struct uhci_qh *skel; /* Skeleton head */ - - struct uhci_td *first; /* First TD in the chain */ - - wait_queue_head_t wakeup; -} __attribute__((aligned(16))); - -struct uhci_framelist { - __u32 frame[UHCI_NUMFRAMES]; -} __attribute__((aligned(4096))); - /* * for TD : */ @@ -104,20 +81,19 @@ struct uhci_framelist { #define TD_CTRL_NAK (1 << 19) /* NAK Received */ #define TD_CTRL_CRCTIMEO (1 << 18) /* CRC/Time Out Error */ #define TD_CTRL_BITSTUFF (1 << 17) /* Bit Stuff Error */ -#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ +#define TD_CTRL_ACTLEN_MASK 0x7ff /* actual length, encoded as n - 1 */ #define TD_CTRL_ANY_ERROR (TD_CTRL_STALLED | TD_CTRL_DBUFERR | \ TD_CTRL_BABBLE | TD_CTRL_CRCTIME | TD_CTRL_BITSTUFF) #define uhci_status_bits(ctrl_sts) (ctrl_sts & 0xFE0000) -#define uhci_actual_length(ctrl_sts) ((ctrl_sts + 1) & TD_CTRL_ACTLEN_MASK) /* 1-based */ - +#define uhci_actual_length(ctrl_sts) ((ctrl_sts + 1) & TD_CTRL_ACTLEN_MASK) /* 1-based */ #define uhci_ptr_to_virt(x) bus_to_virt(x & ~UHCI_PTR_BITS) /* * for TD : */ -#define UHCI_TD_REMOVE 0x0001 /* Remove when done */ +#define UHCI_TD_REMOVE 0x0001 /* Remove when done */ /* * for TD : (a.k.a. Token) @@ -125,7 +101,6 @@ struct uhci_framelist { #define TD_TOKEN_TOGGLE 19 #define uhci_maxlen(token) ((token) >> 21) -#define uhci_expected_length(info) (((info >> 21) + 1) & TD_CTRL_ACTLEN_MASK) /* 1-based */ #define uhci_toggle(token) (((token) >> TD_TOKEN_TOGGLE) & 1) #define uhci_endpoint(token) (((token) >> 15) & 0xf) #define uhci_devaddr(token) (((token) >> 8) & 0x7f) @@ -134,201 +109,143 @@ struct uhci_framelist { #define uhci_packetout(token) (uhci_packetid(token) != USB_PID_IN) #define uhci_packetin(token) (uhci_packetid(token) == USB_PID_IN) -/* - * The documentation says "4 words for hardware, 4 words for software". - * - * That's silly, the hardware doesn't care. The hardware only cares that - * the hardware words are 16-byte aligned, and we can have any amount of - * sw space after the TD entry as far as I can tell. - * - * But let's just go with the documentation, at least for 32-bit machines. - * On 64-bit machines we probably want to take advantage of the fact that - * hw doesn't really care about the size of the sw-only area. - * - * Alas, not anymore, we have more than 4 words for software, woops - */ -struct uhci_td { - /* Hardware fields */ +/* ------------------------------------------------------------------------------------ + New TD/QH-structures + ------------------------------------------------------------------------------------ */ +typedef enum { + TD_TYPE, QH_TYPE +} uhci_desc_type_t; + +typedef struct { __u32 link; __u32 status; __u32 info; __u32 buffer; - - /* Software fields */ - unsigned int *backptr; /* Where to remove this from.. */ - struct list_head irq_list; /* Active interrupt list.. */ - - usb_device_irq completed; /* Completion handler routine */ - void *dev_id; - - atomic_t refcnt; /* Reference counting */ - - struct uhci_device *dev; /* The owning device */ - struct uhci_qh *qh; /* QH this TD is a part of (ignored for Isochronous) */ - unsigned char pipetype; /* Control, Bulk, Interrupt, Isoc */ - int flags; /* Remove, etc */ - int isoc_td_number; /* 0-relative number within a usb_isoc_desc. */ - int bandwidth_alloc; /* in microsecs; used only for Interrupt - * transfers, to return its bandwidth */ -} __attribute__((aligned(16))); - -/* - * Note the alignment requirements of the entries - * - * Each UHCI device has pre-allocated QH and TD entries. - * You can use more than the pre-allocated ones, but I - * don't see you usually needing to. - */ -struct uhci; - -/* The usb device part must be first! Not anymore -jerdfelt */ -struct uhci_device { - struct usb_device *usb; - - atomic_t refcnt; - - struct uhci *uhci; - - unsigned long data[16]; +} uhci_td_t, *puhci_td_t; + +typedef struct { + __u32 head; + __u32 element; /* Queue element pointer */ +} uhci_qh_t, *puhci_qh_t; + +typedef struct { + union { + uhci_td_t td; + uhci_qh_t qh; + } hw; + uhci_desc_type_t type; + struct list_head horizontal; + struct list_head vertical; + struct list_head desc_list; +} uhci_desc_t, *puhci_desc_t; + +typedef struct { + struct list_head desc_list; // list pointer to all corresponding TDs/QHs associated with this request + int short_control_packet; +} urb_priv_t, *purb_priv_t; + +struct virt_root_hub { + int devnum; /* Address of Root Hub endpoint */ + void *urb; + void *int_addr; + int send; + int interval; + int numports; + int c_p_r[8]; + struct timer_list rh_int_timer; }; -#define uhci_to_usb(uhci) ((uhci)->usb) -#define usb_to_uhci(usb) ((struct uhci_device *)(usb)->hcpriv) - -/* - * There are various standard queues. We set up several different - * queues for each of the three basic queue types: interrupt, - * control, and bulk. - * - * - There are various different interrupt latencies: ranging from - * every other USB frame (2 ms apart) to every 256 USB frames (ie - * 256 ms apart). Make your choice according to how obnoxious you - * want to be on the wire, vs how critical latency is for you. - * - The control list is done every frame. - * - There are 4 bulk lists, so that up to four devices can have a - * bulk list of their own and when run concurrently all four lists - * will be be serviced. - * - * This is a bit misleading, there are various interrupt latencies, but they - * vary a bit, interrupt2 isn't exactly 2ms, it can vary up to 4ms since the - * other queues can "override" it. interrupt4 can vary up to 8ms, etc. Minor - * problem - * - * In the case of the root hub, these QH's are just head's of qh's. Don't - * be scared, it kinda makes sense. Look at this wonderful picture care of - * Linus: - * - * generic- -> dev1- -> generic- -> dev1- -> control- -> bulk- -> ... - * iso-QH iso-QH irq-QH irq-QH QH QH - * | | | | | | - * End dev1-iso-TD1 End dev1-irq-TD1 ... ... - * | - * dev1-iso-TD2 - * | - * .... - * - * This may vary a bit (the UHCI docs don't explicitly say you can put iso - * transfers in QH's and all of their pictures don't have that either) but - * other than that, that is what we're doing now - * - * And now we don't put Iso transfers in QH's, so we don't waste one on it - * --jerdfelt - * - * To keep with Linus' nomenclature, this is called the QH skeleton. These - * labels (below) are only signficant to the root hub's QH's - */ -#define UHCI_NUM_SKELQH 11 - -#define skel_int1_qh skelqh[0] -#define skel_int2_qh skelqh[1] -#define skel_int4_qh skelqh[2] -#define skel_int8_qh skelqh[3] -#define skel_int16_qh skelqh[4] -#define skel_int32_qh skelqh[5] -#define skel_int64_qh skelqh[6] -#define skel_int128_qh skelqh[7] -#define skel_int256_qh skelqh[8] - -#define skel_control_qh skelqh[9] - -#define skel_bulk_qh skelqh[10] - -/* - * Search tree for determining where fits in the - * skelqh[] skeleton. - * - * An interrupt request should be placed into the slowest skelqh[] - * which meets the interval/period/frequency requirement. - * An interrupt request is allowed to be faster than but not slower. - * - * For a given , this function returns the appropriate/matching - * skelqh[] index value. - * - * NOTE: For UHCI, we don't really need int256_qh since the maximum interval - * is 255 ms. However, we do need an int1_qh since 1 is a valid interval - * and we should meet that frequency when requested to do so. - * This will require some change(s) to the UHCI skeleton. - */ -static inline int __interval_to_skel(int interval) -{ - if (interval < 16) { - if (interval < 4) { - if (interval < 2) { - return 0; /* int1 for 0-1 ms */ - } - return 1; /* int2 for 2-3 ms */ - } - if (interval < 8) { - return 2; /* int4 for 4-7 ms */ - } - return 3; /* int8 for 8-15 ms */ - } - if (interval < 64) { - if (interval < 32) { - return 4; /* int16 for 16-31 ms */ - } - return 5; /* int32 for 32-63 ms */ - } - if (interval < 128) - return 6; /* int64 for 64-127 ms */ - return 7; /* int128 for 128-255 ms (Max.) */ -} - -/* - * This describes the full uhci information. - * - * Note how the "proper" USB information is just - * a subset of what the full implementation needs. - */ -struct uhci { +typedef struct uhci { int irq; unsigned int io_addr; unsigned int io_size; - - int control_pid; - int control_running; - int control_continue; - - struct list_head uhci_list; - - struct usb_bus *bus; - - struct uhci_qh skelqh[UHCI_NUM_SKELQH]; /* Skeleton QH's */ - - struct uhci_framelist *fl; /* Frame list */ - struct list_head interrupt_list; /* List of interrupt-active TD's for this uhci */ - - struct uhci_td *ticktd; -}; - -/* needed for the debugging code */ -struct uhci_td *uhci_link_to_td(unsigned int element); - -/* Debugging code */ -void uhci_show_td(struct uhci_td *td); -void uhci_show_status(struct uhci *uhci); -void uhci_show_queue(struct uhci_qh *qh); -void uhci_show_queues(struct uhci *uhci); + unsigned int maxports; + + int apm_state; + + struct uhci *next; // chain of uhci device contexts + + struct list_head urb_list; // list of all pending urbs + + spinlock_t urb_list_lock; // lock to keep consistency + + struct usb_bus *bus; // our bus + + spinlock_t unlink_urb_lock; // lock for unlink_urb + + __u32 *framelist; + uhci_desc_t **iso_td; + uhci_desc_t *int_chain[8]; + uhci_desc_t *control_chain; + uhci_desc_t *bulk_chain; + uhci_desc_t *chain_end; + spinlock_t qh_lock; + spinlock_t td_lock; + struct virt_root_hub rh; //private data of the virtual root hub +} uhci_t, *puhci_t; + + +#define MAKE_TD_ADDR(a) (virt_to_bus(a)&~UHCI_PTR_QH) +#define MAKE_QH_ADDR(a) (virt_to_bus(a)|UHCI_PTR_QH) +#define UHCI_GET_CURRENT_FRAME(uhci) (inw ((uhci)->io_addr + USBFRNUM)) + +/* ------------------------------------------------------------------------------------ + Virtual Root HUB + ------------------------------------------------------------------------------------ */ +/* destination of request */ +#define RH_INTERFACE 0x01 +#define RH_ENDPOINT 0x02 +#define RH_OTHER 0x03 + +#define RH_CLASS 0x20 +#define RH_VENDOR 0x40 + +/* Requests: bRequest << 8 | bmRequestType */ +#define RH_GET_STATUS 0x0080 +#define RH_CLEAR_FEATURE 0x0100 +#define RH_SET_FEATURE 0x0300 +#define RH_SET_ADDRESS 0x0500 +#define RH_GET_DESCRIPTOR 0x0680 +#define RH_SET_DESCRIPTOR 0x0700 +#define RH_GET_CONFIGURATION 0x0880 +#define RH_SET_CONFIGURATION 0x0900 +#define RH_GET_STATE 0x0280 +#define RH_GET_INTERFACE 0x0A80 +#define RH_SET_INTERFACE 0x0B00 +#define RH_SYNC_FRAME 0x0C80 +/* Our Vendor Specific Request */ +#define RH_SET_EP 0x2000 + + +/* Hub port features */ +#define RH_PORT_CONNECTION 0x00 +#define RH_PORT_ENABLE 0x01 +#define RH_PORT_SUSPEND 0x02 +#define RH_PORT_OVER_CURRENT 0x03 +#define RH_PORT_RESET 0x04 +#define RH_PORT_POWER 0x08 +#define RH_PORT_LOW_SPEED 0x09 +#define RH_C_PORT_CONNECTION 0x10 +#define RH_C_PORT_ENABLE 0x11 +#define RH_C_PORT_SUSPEND 0x12 +#define RH_C_PORT_OVER_CURRENT 0x13 +#define RH_C_PORT_RESET 0x14 + +/* Hub features */ +#define RH_C_HUB_LOCAL_POWER 0x00 +#define RH_C_HUB_OVER_CURRENT 0x01 + +#define RH_DEVICE_REMOTE_WAKEUP 0x00 +#define RH_ENDPOINT_STALL 0x01 + +/* Our Vendor Specific feature */ +#define RH_REMOVE_EP 0x00 + + +#define RH_ACK 0x01 +#define RH_REQ_ERR -1 +#define RH_NACK 0x00 + +#define min(a,b) (((a)<(b))?(a):(b)) #endif - -- cgit v1.2.3