From e5067d7cd967cb17067de24a162306b79f432b20 Mon Sep 17 00:00:00 2001 From: Ralf Baechle Date: Wed, 24 Jun 2015 04:23:46 +0200 Subject: Import newax25-2.4.3.patch.1.bz2 And cleanup the *.orig and *.rej files and whitespace errors that are part of the original patch. Signed-off-by: Ralf Baechle --- net/ax25/ax25_ds_subr.c | 217 ------------------------------------------------ 1 file changed, 217 deletions(-) delete mode 100644 net/ax25/ax25_ds_subr.c (limited to 'net/ax25/ax25_ds_subr.c') diff --git a/net/ax25/ax25_ds_subr.c b/net/ax25/ax25_ds_subr.c deleted file mode 100644 index e3e88d771..000000000 --- a/net/ax25/ax25_ds_subr.c +++ /dev/null @@ -1,217 +0,0 @@ -/* - * AX.25 release 037 - * - * This code REQUIRES 2.1.15 or higher/ NET3.038 - * - * This module: - * This module is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version - * 2 of the License, or (at your option) any later version. - * - * Most of this code is based on the SDL diagrams published in the 7th - * ARRL Computer Networking Conference papers. The diagrams have mistakes - * in them, but are mostly correct. Before you modify the code could you - * read the SDL diagrams as the code is not obvious and probably very - * easy to break; - * - * History - * AX.25 036 Jonathan(G4KLX) Cloned from ax25_out.c and ax25_subr.c. - * Joerg(DL1BKE) Changed ax25_ds_enquiry_response(), - * fixed ax25_dama_on() and ax25_dama_off(). - * AX.25 037 Jonathan(G4KLX) New timer architecture. - */ - -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include -#include - -void ax25_ds_nr_error_recovery(ax25_cb *ax25) -{ - ax25_ds_establish_data_link(ax25); -} - -/* - * dl1bke 960114: transmit I frames on DAMA poll - */ -void ax25_ds_enquiry_response(ax25_cb *ax25) -{ - ax25_cb *ax25o; - - /* Please note that neither DK4EG´s nor DG2FEF´s - * DAMA spec mention the following behaviour as seen - * with TheFirmware: - * - * DB0ACH->DL1BKE [DAMA] - * DL1BKE->DB0ACH - * DL1BKE-7->DB0PRA-6 DB0ACH - * DL1BKE->DB0ACH - * - * The Flexnet DAMA Master implementation apparently - * insists on the "proper" AX.25 behaviour: - * - * DB0ACH->DL1BKE [DAMA] - * DL1BKE->DB0ACH - * DL1BKE->DB0ACH - * DL1BKE-7->DB0PRA-6 DB0ACH - * - * Flexnet refuses to send us *any* I frame if we send - * a REJ in case AX25_COND_REJECT is set. It is superfluous in - * this mode anyway (a RR or RNR invokes the retransmission). - * Is this a Flexnet bug? - */ - - ax25_std_enquiry_response(ax25); - - if (!(ax25->condition & AX25_COND_PEER_RX_BUSY)) { - ax25_requeue_frames(ax25); - ax25_kick(ax25); - } - - if (ax25->state == AX25_STATE_1 || ax25->state == AX25_STATE_2 || skb_peek(&ax25->ack_queue) != NULL) - ax25_ds_t1_timeout(ax25); - else - ax25->n2count = 0; - - ax25_start_t3timer(ax25); - ax25_ds_set_timer(ax25->ax25_dev); - - for (ax25o = ax25_list; ax25o != NULL; ax25o = ax25o->next) { - if (ax25o == ax25) - continue; - - if (ax25o->ax25_dev != ax25->ax25_dev) - continue; - - if (ax25o->state == AX25_STATE_1 || ax25o->state == AX25_STATE_2) { - ax25_ds_t1_timeout(ax25o); - continue; - } - - if (!(ax25o->condition & AX25_COND_PEER_RX_BUSY) && ax25o->state == AX25_STATE_3) { - ax25_requeue_frames(ax25o); - ax25_kick(ax25o); - } - - if (ax25o->state == AX25_STATE_1 || ax25o->state == AX25_STATE_2 || skb_peek(&ax25o->ack_queue) != NULL) - ax25_ds_t1_timeout(ax25o); - - /* do not start T3 for listening sockets (tnx DD8NE) */ - - if (ax25o->state != AX25_STATE_0) - ax25_start_t3timer(ax25o); - } -} - -void ax25_ds_establish_data_link(ax25_cb *ax25) -{ - ax25->condition &= AX25_COND_DAMA_MODE; - ax25->n2count = 0; - ax25_calculate_t1(ax25); - ax25_start_t1timer(ax25); - ax25_stop_t2timer(ax25); - ax25_start_t3timer(ax25); -} - -/* - * :::FIXME::: - * This is a kludge. Not all drivers recognize kiss commands. - * We need a driver level request to switch duplex mode, that does - * either SCC changing, PI config or KISS as required. Currently - * this request isn't reliable. - */ -static void ax25_kiss_cmd(ax25_dev *ax25_dev, unsigned char cmd, unsigned char param) -{ - struct sk_buff *skb; - unsigned char *p; - - if (ax25_dev->dev == NULL) - return; - - if ((skb = alloc_skb(2, GFP_ATOMIC)) == NULL) - return; - - skb->nh.raw = skb->data; - p = skb_put(skb, 2); - - *p++ = cmd; - *p++ = param; - - skb->dev = ax25_dev->dev; - skb->protocol = htons(ETH_P_AX25); - - dev_queue_xmit(skb); -} - -/* - * A nasty problem arises if we count the number of DAMA connections - * wrong, especially when connections on the device already existed - * and our network node (or the sysop) decides to turn on DAMA Master - * mode. We thus flag the 'real' slave connections with - * ax25->dama_slave=1 and look on every disconnect if still slave - * connections exist. - */ -static int ax25_check_dama_slave(ax25_dev *ax25_dev) -{ - ax25_cb *ax25; - - for (ax25 = ax25_list; ax25 != NULL ; ax25 = ax25->next) - if (ax25->ax25_dev == ax25_dev && (ax25->condition & AX25_COND_DAMA_MODE) && ax25->state > AX25_STATE_1) - return 1; - - return 0; -} - -void ax25_dev_dama_on(ax25_dev *ax25_dev) -{ - if (ax25_dev == NULL) - return; - - if (ax25_dev->dama.slave == 0) - ax25_kiss_cmd(ax25_dev, 5, 1); - - ax25_dev->dama.slave = 1; - ax25_ds_set_timer(ax25_dev); -} - -void ax25_dev_dama_off(ax25_dev *ax25_dev) -{ - if (ax25_dev == NULL) - return; - - if (ax25_dev->dama.slave && !ax25_check_dama_slave(ax25_dev)) { - ax25_kiss_cmd(ax25_dev, 5, 0); - ax25_dev->dama.slave = 0; - ax25_ds_del_timer(ax25_dev); - } -} - -void ax25_dama_on(ax25_cb *ax25) -{ - ax25_dev_dama_on(ax25->ax25_dev); - ax25->condition |= AX25_COND_DAMA_MODE; -} - -void ax25_dama_off(ax25_cb *ax25) -{ - ax25->condition &= ~AX25_COND_DAMA_MODE; - ax25_dev_dama_off(ax25->ax25_dev); -} - -- cgit v1.2.3