#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Kernel configuration of Linux for Alpha machines"

# clear all implied options (don't want default values for those):
unset CONFIG_CROSSCOMPILE CONFIG_NATIVE
unset CONFIG_PCI CONFIG_ALPHA_LCA CONFIG_ALPHA_APECS
unset CONFIG_ALPHA_NEED_ROUNDING_EMULATION

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  MODULES=y
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

if [ "`uname`" != "Linux" ]; then
  define_bool CONFIG_CROSSCOMPILE y
else
  define_bool CONFIG_NATIVE y
fi

choice 'Alpha system type' \
	"Avanti		CONFIG_ALPHA_AVANTI		\
	 Alpha-XL	CONFIG_ALPHA_XL			\
	 Alpha-XLT	CONFIG_ALPHA_XLT		\
	 Cabriolet	CONFIG_ALPHA_CABRIOLET		\
	 EB66		CONFIG_ALPHA_EB66		\
	 EB66+		CONFIG_ALPHA_EB66P		\
	 EB64+		CONFIG_ALPHA_EB64P		\
	 EB164		CONFIG_ALPHA_EB164		\
	 PC164		CONFIG_ALPHA_PC164		\
	 Jensen		CONFIG_ALPHA_JENSEN		\
	 Noname		CONFIG_ALPHA_NONAME		\
	 Mikasa		CONFIG_ALPHA_MIKASA		\
	 Alcor		CONFIG_ALPHA_ALCOR		\
	 Platform2000	CONFIG_ALPHA_P2K" Cabriolet
if [ "$CONFIG_ALPHA_NONAME" = "y" -o "$CONFIG_ALPHA_EB66" = "y" \
	-o "$CONFIG_ALPHA_EB66P" = "y" -o "$CONFIG_ALPHA_P2K" = "y" ]
then
	define_bool CONFIG_PCI y
	define_bool CONFIG_ALPHA_LCA y
fi
if [ "$CONFIG_ALPHA_CABRIOLET" = "y" -o "$CONFIG_ALPHA_AVANTI" = "y" \
	-o "$CONFIG_ALPHA_EB64P" = "y" -o "$CONFIG_ALPHA_MIKASA" = "y" \
	-o "$CONFIG_ALPHA_XL" = "y" ]
then
	define_bool CONFIG_PCI y
	define_bool CONFIG_ALPHA_APECS y
fi
if [ "$CONFIG_ALPHA_EB164" = "y" -o "$CONFIG_ALPHA_PC164" = "y" \
	-o "$CONFIG_ALPHA_ALCOR" = "y" -o "$CONFIG_ALPHA_XLT" = "y" ]
then
	define_bool CONFIG_PCI y
	define_bool CONFIG_ALPHA_EV5 y
	define_bool CONFIG_ALPHA_CIA y
else
	# EV45 and older do not support all rounding modes in hw:
	define_bool CONFIG_ALPHA_NEED_ROUNDING_EMULATION y
fi

if [ "$CONFIG_ALPHA_CABRIOLET" = "y" -o "$CONFIG_ALPHA_AVANTI" = "y" \
	-o "$CONFIG_ALPHA_EB64P" = "y" -o "$CONFIG_ALPHA_JENSEN" = "y" \
	-o "$CONFIG_ALPHA_MIKASA" = "y" -o "$CONFIG_ALPHA_ALCOR" = "y" ]
then
	bool 'Using SRM as bootloader' CONFIG_ALPHA_SRM
fi
if [ "$CONFIG_ALPHA_XL" = "y" ]
then
	define_bool CONFIG_ALPHA_AVANTI y
fi

if [ "$CONFIG_PCI" = "y" ]; then
  bool 'TGA Console Support' CONFIG_TGA_CONSOLE
  if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
    bool 'PCI bridge optimization (experimental)' CONFIG_PCI_OPTIMIZE
  fi
fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'Kernel support for a.out (ECOFF) binaries' CONFIG_BINFMT_AOUT
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for JAVA binaries (obsolete)' CONFIG_BINFMT_JAVA
fi
tristate 'Kernel support for Linux/Intel ELF binaries' CONFIG_BINFMT_EM86
tristate 'Parallel port support' CONFIG_PARPORT
if [ "$CONFIG_PARPORT" != "n" ]; then
  dep_tristate '  PC-style hardware' CONFIG_PARPORT_PC $CONFIG_PARPORT
fi
endmenu

source drivers/pnp/Config.in

source drivers/block/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
  fi
  endmenu
fi

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'

bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

source fs/Config.in

source fs/nls/Config.in

source drivers/char/Config.in
if [ "$CONFIG_RTC" != "n" ]; then
  bool '  ARC console time' CONFIG_RTC_ARC y
fi

mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Kernel profiling support' CONFIG_PROFILE
if [ "$CONFIG_PROFILE" = "y" ]; then
  int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
fi
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
endmenu