/* * Code common to all CIA chips. * * Written by David A Rusling (david.rusling@reo.mts.dec.com). * December 1995. * */ #include #include #include #include #include #include #include #include #include #include #include extern struct hwrpb_struct *hwrpb; extern asmlinkage void wrmces(unsigned long mces); extern int alpha_sys_type; /* * Machine check reasons. Defined according to PALcode sources * (osf.h and platform.h). */ #define MCHK_K_TPERR 0x0080 #define MCHK_K_TCPERR 0x0082 #define MCHK_K_HERR 0x0084 #define MCHK_K_ECC_C 0x0086 #define MCHK_K_ECC_NC 0x0088 #define MCHK_K_OS_BUGCHECK 0x008A #define MCHK_K_PAL_BUGCHECK 0x0090 /* * BIOS32-style PCI interface: */ #ifdef CONFIG_ALPHA_CIA #ifdef DEBUG # define DBG(args) printk args #else # define DBG(args) #endif #define vulp volatile unsigned long * #define vuip volatile unsigned int * static volatile unsigned int CIA_mcheck_expected = 0; static volatile unsigned int CIA_mcheck_taken = 0; static unsigned long CIA_jd; /* * Given a bus, device, and function number, compute resulting * configuration space address and setup the CIA_HAXR2 register * accordingly. It is therefore not safe to have concurrent * invocations to configuration space access routines, but there * really shouldn't be any need for this. * * Type 0: * * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | |D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|0| * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * 31:11 Device select bit. * 10:8 Function number * 7:2 Register number * * Type 1: * * 3 3|3 3 2 2|2 2 2 2|2 2 2 2|1 1 1 1|1 1 1 1|1 1 * 3 2|1 0 9 8|7 6 5 4|3 2 1 0|9 8 7 6|5 4 3 2|1 0 9 8|7 6 5 4|3 2 1 0 * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * | | | | | | | | | | |B|B|B|B|B|B|B|B|D|D|D|D|D|F|F|F|R|R|R|R|R|R|0|1| * +-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+-+ * * 31:24 reserved * 23:16 bus number (8 bits = 128 possible buses) * 15:11 Device number (5 bits) * 10:8 function number * 7:2 register number * * Notes: * The function number selects which function of a multi-function device * (e.g., scsi and ethernet). * * The register selects a DWORD (32 bit) register offset. Hence it * doesn't get shifted by 2 bits as we want to "drop" the bottom two * bits. */ static int mk_conf_addr(unsigned char bus, unsigned char device_fn, unsigned char where, unsigned long *pci_addr, unsigned char *type1) { unsigned long addr; DBG(("mk_conf_addr(bus=%d ,device_fn=0x%x, where=0x%x, pci_addr=0x%p, type1=0x%p)\n", bus, device_fn, where, pci_addr, type1)); if (bus == 0) { int device = device_fn >> 3; /* type 0 configuration cycle: */ if (device > 20) { DBG(("mk_conf_addr: device (%d) > 20, returning -1\n", device)); return -1; } *type1 = 0; addr = (device_fn << 8) | (where); } else { /* type 1 configuration cycle: */ *type1 = 1; addr = (bus << 16) | (device_fn << 8) | (where); } *pci_addr = addr; DBG(("mk_conf_addr: returning pci_addr 0x%lx\n", addr)); return 0; } static unsigned int conf_read(unsigned long addr, unsigned char type1) { unsigned long flags; unsigned int stat0, value; unsigned int cia_cfg = 0; /* to keep gcc quiet */ save_flags(flags); /* avoid getting hit by machine check */ cli(); DBG(("conf_read(addr=0x%lx, type1=%d)\n", addr, type1)); /* reset status register to avoid losing errors: */ stat0 = *((volatile unsigned int *)CIA_IOC_CIA_ERR); *((volatile unsigned int *)CIA_IOC_CIA_ERR) = stat0; mb(); DBG(("conf_read: CIA ERR was 0x%x\n", stat0)); /* if Type1 access, must set CIA CFG */ if (type1) { cia_cfg = *((unsigned int *)CIA_IOC_CFG); mb(); *((unsigned int *)CIA_IOC_CFG) = cia_cfg | 1; DBG(("conf_read: TYPE1 access\n")); } mb(); draina(); CIA_mcheck_expected = 1; CIA_mcheck_taken = 0; mb(); /* access configuration space: */ value = *((volatile unsigned int *)addr); mb(); mb(); if (CIA_mcheck_taken) { CIA_mcheck_taken = 0; value = 0xffffffffU; mb(); } CIA_mcheck_expected = 0; mb(); /* * david.rusling@reo.mts.dec.com. This code is needed for the * EB64+ as it does not generate a machine check (why I don't * know). When we build kernels for one particular platform * then we can make this conditional on the type. */ #if 0 draina(); /* now look for any errors */ stat0 = *((unsigned int *)CIA_IOC_CIA_ERR); DBG(("conf_read: CIA ERR after read 0x%x\n", stat0)); if (stat0 & 0x8280U) { /* is any error bit set? */ /* if not NDEV, print status */ if (!(stat0 & 0x0080)) { printk("CIA.c:conf_read: got stat0=%x\n", stat0); } /* reset error status: */ *((volatile unsigned long *)CIA_IOC_CIA_ERR) = stat0; mb(); wrmces(0x7); /* reset machine check */ value = 0xffffffff; } #endif /* if Type1 access, must reset IOC CFG so normal IO space ops work */ if (type1) { *((unsigned int *)CIA_IOC_CFG) = cia_cfg & ~1; mb(); } DBG(("conf_read(): finished\n")); restore_flags(flags); return value; } static void conf_write(unsigned long addr, unsigned int value, unsigned char type1) { unsigned long flags; unsigned int stat0; unsigned int cia_cfg = 0; /* to keep gcc quiet */ save_flags(flags); /* avoid getting hit by machine check */ cli(); /* reset status register to avoid losing errors: */ stat0 = *((volatile unsigned int *)CIA_IOC_CIA_ERR); *((volatile unsigned int *)CIA_IOC_CIA_ERR) = stat0; mb(); DBG(("conf_write: CIA ERR was 0x%x\n", stat0)); /* if Type1 access, must set CIA CFG */ if (type1) { cia_cfg = *((unsigned int *)CIA_IOC_CFG); mb(); *((unsigned int *)CIA_IOC_CFG) = cia_cfg | 1; DBG(("conf_read: TYPE1 access\n")); } draina(); CIA_mcheck_expected = 1; mb(); /* access configuration space: */ *((volatile unsigned int *)addr) = value; mb(); mb(); CIA_mcheck_expected = 0; mb(); /* * david.rusling@reo.mts.dec.com. This code is needed for the * EB64+ as it does not generate a machine check (why I don't * know). When we build kernels for one particular platform * then we can make this conditional on the type. */ #if 0 draina(); /* now look for any errors */ stat0 = *((unsigned int *)CIA_IOC_CIA_ERR); DBG(("conf_write: CIA ERR after write 0x%x\n", stat0)); if (stat0 & 0x8280U) { /* is any error bit set? */ /* if not NDEV, print status */ if (!(stat0 & 0x0080)) { printk("CIA.c:conf_read: got stat0=%x\n", stat0); } /* reset error status: */ *((volatile unsigned long *)CIA_IOC_CIA_ERR) = stat0; mb(); wrmces(0x7); /* reset machine check */ value = 0xffffffff; } #endif /* if Type1 access, must reset IOC CFG so normal IO space ops work */ if (type1) { *((unsigned int *)CIA_IOC_CFG) = cia_cfg & ~1; mb(); } DBG(("conf_write(): finished\n")); restore_flags(flags); } int pcibios_read_config_byte (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned char *value) { unsigned long addr = CIA_CONF; unsigned long pci_addr; unsigned char type1; *value = 0xff; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x00; *value = conf_read(addr, type1) >> ((where & 3) * 8); return PCIBIOS_SUCCESSFUL; } int pcibios_read_config_word (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned short *value) { unsigned long addr = CIA_CONF; unsigned long pci_addr; unsigned char type1; *value = 0xffff; if (where & 0x1) { return PCIBIOS_BAD_REGISTER_NUMBER; } if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1)) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x08; *value = conf_read(addr, type1) >> ((where & 3) * 8); return PCIBIOS_SUCCESSFUL; } int pcibios_read_config_dword (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned int *value) { unsigned long addr = CIA_CONF; unsigned long pci_addr; unsigned char type1; *value = 0xffffffff; if (where & 0x3) { return PCIBIOS_BAD_REGISTER_NUMBER; } if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1)) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x18; *value = conf_read(addr, type1); return PCIBIOS_SUCCESSFUL; } int pcibios_write_config_byte (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned char value) { unsigned long addr = CIA_CONF; unsigned long pci_addr; unsigned char type1; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x00; conf_write(addr, value << ((where & 3) * 8), type1); return PCIBIOS_SUCCESSFUL; } int pcibios_write_config_word (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned short value) { unsigned long addr = CIA_CONF; unsigned long pci_addr; unsigned char type1; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x08; conf_write(addr, value << ((where & 3) * 8), type1); return PCIBIOS_SUCCESSFUL; } int pcibios_write_config_dword (unsigned char bus, unsigned char device_fn, unsigned char where, unsigned int value) { unsigned long addr = CIA_CONF; unsigned long pci_addr; unsigned char type1; if (mk_conf_addr(bus, device_fn, where, &pci_addr, &type1) < 0) { return PCIBIOS_SUCCESSFUL; } addr |= (pci_addr << 5) + 0x18; conf_write(addr, value << ((where & 3) * 8), type1); return PCIBIOS_SUCCESSFUL; } unsigned long cia_init(unsigned long mem_start, unsigned long mem_end) { unsigned int cia_err ; /* * Set up error reporting. */ cia_err = *(vuip)CIA_IOC_CIA_ERR ; cia_err |= (0x1 << 7) ; /* master abort */ *(vuip)CIA_IOC_CIA_ERR = cia_err ; mb() ; /* * Set up the PCI->physical memory translation windows. * For now, windows 1,2 and 3 are disabled. In the future, we may * want to use them to do scatter/gather DMA. Window 0 * goes at 1 GB and is 1 GB large. */ *(vuip)CIA_IOC_PCI_W0_BASE = 1U | (CIA_DMA_WIN_BASE & 0xfff00000U); *(vuip)CIA_IOC_PCI_W0_MASK = (CIA_DMA_WIN_SIZE - 1) & 0xfff00000U; *(vuip)CIA_IOC_PCI_T0_BASE = 0; *(vuip)CIA_IOC_PCI_W1_BASE = 0x0 ; *(vuip)CIA_IOC_PCI_W2_BASE = 0x0 ; *(vuip)CIA_IOC_PCI_W3_BASE = 0x0 ; /* * check ASN in HWRPB for validity, report if bad */ if (hwrpb->max_asn != MAX_ASN) { printk("CIA_init: max ASN from HWRPB is bad (0x%lx)\n", hwrpb->max_asn); hwrpb->max_asn = MAX_ASN; } /* * Finally, clear the CIA_CFG register, which gets used * for PCI Config Space accesses. That is the way * we want to use it, and we do not want to depend on * what ARC or SRM might have left behind... */ { #if 0 unsigned int cia_cfg = *((unsigned int *)CIA_IOC_CFG); mb(); if (cia_cfg) printk("CIA_init: CFG was 0x%x\n", cia_cfg); #endif *((unsigned int *)CIA_IOC_CFG) = 0; mb(); } return mem_start; } int cia_pci_clr_err(void) { CIA_jd = *((unsigned int *)CIA_IOC_CIA_ERR); DBG(("CIA_pci_clr_err: CIA ERR after read 0x%x\n", CIA_jd)); *((unsigned long *)CIA_IOC_CIA_ERR) = 0x0080; mb(); return 0; } void cia_machine_check(unsigned long vector, unsigned long la_ptr, struct pt_regs * regs) { struct el_common *mchk_header; struct el_procdata *mchk_procdata; struct el_CIA_sysdata_mcheck *mchk_sysdata; unsigned long * ptr; const char * reason; char buf[128]; long i; mchk_header = (struct el_common *)la_ptr; mchk_procdata = (struct el_procdata *)(la_ptr + mchk_header->proc_offset); mchk_sysdata = (struct el_CIA_sysdata_mcheck *)(la_ptr + mchk_header->sys_offset); DBG(("cia_machine_check: vector=0x%lx la_ptr=0x%lx\n", vector, la_ptr)); DBG((" pc=0x%lx size=0x%x procoffset=0x%x sysoffset 0x%x\n", regs->pc, mchk_header->size, mchk_header->proc_offset, mchk_header->sys_offset)); DBG(("cia_machine_check: expected %d DCSR 0x%lx PEAR 0x%lx\n", CIA_mcheck_expected, mchk_sysdata->epic_dcsr, mchk_sysdata->epic_pear)); #ifdef DEBUG { unsigned long *ptr; int i; ptr = (unsigned long *)la_ptr; for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { printk(" +%lx %lx %lx\n", i*sizeof(long), ptr[i], ptr[i+1]); } } #endif /* DEBUG */ /* * Check if machine check is due to a badaddr() and if so, * ignore the machine check. */ mb(); mb(); if (CIA_mcheck_expected/* && (mchk_sysdata->epic_dcsr && 0x0c00UL)*/) { DBG(("CIA machine check expected\n")); CIA_mcheck_expected = 0; CIA_mcheck_taken = 1; mb(); mb(); draina(); cia_pci_clr_err(); wrmces(0x7); mb(); return; } switch ((unsigned int) mchk_header->code) { case MCHK_K_TPERR: reason = "tag parity error"; break; case MCHK_K_TCPERR: reason = "tag control parity error"; break; case MCHK_K_HERR: reason = "generic hard error"; break; case MCHK_K_ECC_C: reason = "correctable ECC error"; break; case MCHK_K_ECC_NC: reason = "uncorrectable ECC error"; break; case MCHK_K_OS_BUGCHECK: reason = "OS-specific PAL bugcheck"; break; case MCHK_K_PAL_BUGCHECK: reason = "callsys in kernel mode"; break; case 0x96: reason = "i-cache read retryable error"; break; case 0x98: reason = "processor detected hard error"; break; /* system specific (these are for Alcor, at least): */ case 0x203: reason = "system detected uncorrectable ECC error"; break; case 0x205: reason = "parity error detected by CIA"; break; case 0x207: reason = "non-existent memory error"; break; case 0x209: reason = "PCI SERR detected"; break; case 0x20b: reason = "PCI data parity error detected"; break; case 0x20d: reason = "PCI address parity error detected"; break; case 0x20f: reason = "PCI master abort error"; break; case 0x211: reason = "PCI target abort error"; break; case 0x213: reason = "scatter/gather PTE invalid error"; break; case 0x215: reason = "flash ROM write error"; break; case 0x217: reason = "IOA timeout detected"; break; case 0x219: reason = "IOCHK#, EISA add-in board parity or other catastrophic error"; break; case 0x21b: reason = "EISA fail-safe timer timeout"; break; case 0x21d: reason = "EISA bus time-out"; break; case 0x21f: reason = "EISA software generated NMI"; break; case 0x221: reason = "unexpected ev5 IRQ[3] interrupt"; break; default: sprintf(buf, "reason for machine-check unknown (0x%x)", (unsigned int) mchk_header->code); reason = buf; break; } wrmces(rdmces()); /* reset machine check pending flag */ mb(); printk(KERN_CRIT " CIA machine check: %s%s\n", reason, mchk_header->retry ? " (retryable)" : ""); /* dump the the logout area to give all info: */ ptr = (unsigned long *)la_ptr; for (i = 0; i < mchk_header->size / sizeof(long); i += 2) { printk(KERN_CRIT " +%8lx %016lx %016lx\n", i*sizeof(long), ptr[i], ptr[i+1]); } } #endif /* CONFIG_ALPHA_CIA */