/* * linux/arch/alpha/kernel/irq_i8259.c * * This is the 'legacy' 8259A Programmable Interrupt Controller, * present in the majority of PC/AT boxes. * * Started hacking from linux-2.3.30pre6/arch/i386/kernel/i8259.c. */ #include #include #include #include #include #include #include #include "proto.h" #include "irq_impl.h" /* Note mask bit is true for DISABLED irqs. */ static unsigned int cached_irq_mask = 0xffff; spinlock_t i8259_irq_lock = SPIN_LOCK_UNLOCKED; static inline void i8259_update_irq_hw(unsigned int irq, unsigned long mask) { int port = 0x21; if (irq & 8) mask >>= 8; if (irq & 8) port = 0xA1; outb(mask, port); } inline void i8259a_enable_irq(unsigned int irq) { spin_lock(&i8259_irq_lock); i8259_update_irq_hw(irq, cached_irq_mask &= ~(1 << irq)); spin_unlock(&i8259_irq_lock); } static inline void __i8259a_disable_irq(unsigned int irq) { i8259_update_irq_hw(irq, cached_irq_mask |= 1 << irq); } void i8259a_disable_irq(unsigned int irq) { spin_lock(&i8259_irq_lock); __i8259a_disable_irq(irq); spin_unlock(&i8259_irq_lock); } void i8259a_mask_and_ack_irq(unsigned int irq) { spin_lock(&i8259_irq_lock); __i8259a_disable_irq(irq); /* Ack the interrupt making it the lowest priority. */ if (irq >= 8) { outb(0xE0 | (irq - 8), 0xa0); /* ack the slave */ irq = 2; } outb(0xE0 | irq, 0x20); /* ack the master */ spin_unlock(&i8259_irq_lock); } unsigned int i8259a_startup_irq(unsigned int irq) { i8259a_enable_irq(irq); return 0; /* never anything pending */ } void i8259a_end_irq(unsigned int irq) { if (!(irq_desc[irq].status & (IRQ_DISABLED|IRQ_INPROGRESS))) i8259a_enable_irq(irq); } struct hw_interrupt_type i8259a_irq_type = { typename: "XT-PIC", startup: i8259a_startup_irq, shutdown: i8259a_disable_irq, enable: i8259a_enable_irq, disable: i8259a_disable_irq, ack: i8259a_mask_and_ack_irq, end: i8259a_end_irq, }; void __init init_i8259a_irqs(void) { static struct irqaction cascade = { handler: no_action, name: "cascade", }; long i; outb(0xff, 0x21); /* mask all of 8259A-1 */ outb(0xff, 0xA1); /* mask all of 8259A-2 */ for (i = 0; i < 16; i++) { irq_desc[i].status = IRQ_DISABLED; irq_desc[i].handler = &i8259a_irq_type; } setup_irq(2, &cascade); } #if defined(CONFIG_ALPHA_GENERIC) # define IACK_SC alpha_mv.iack_sc #elif defined(CONFIG_ALPHA_APECS) # define IACK_SC APECS_IACK_SC #elif defined(CONFIG_ALPHA_LCA) # define IACK_SC LCA_IACK_SC #elif defined(CONFIG_ALPHA_CIA) # define IACK_SC CIA_IACK_SC #elif defined(CONFIG_ALPHA_PYXIS) # define IACK_SC PYXIS_IACK_SC #elif defined(CONFIG_ALPHA_TSUNAMI) # define IACK_SC TSUNAMI_IACK_SC #elif defined(CONFIG_ALPHA_POLARIS) # define IACK_SC POLARIS_IACK_SC #elif defined(CONFIG_ALPHA_IRONGATE) # define IACK_SC IRONGATE_IACK_SC #endif #if defined(IACK_SC) void isa_device_interrupt(unsigned long vector, struct pt_regs *regs) { /* * Generate a PCI interrupt acknowledge cycle. The PIC will * respond with the interrupt vector of the highest priority * interrupt that is pending. The PALcode sets up the * interrupts vectors such that irq level L generates vector L. */ int j = *(vuip) IACK_SC; j &= 0xff; handle_irq(j, regs); } #endif #if defined(CONFIG_ALPHA_GENERIC) || !defined(IACK_SC) void isa_no_iack_sc_device_interrupt(unsigned long vector, struct pt_regs *regs) { unsigned long pic; /* * It seems to me that the probability of two or more *device* * interrupts occurring at almost exactly the same time is * pretty low. So why pay the price of checking for * additional interrupts here if the common case can be * handled so much easier? */ /* * The first read of gives you *all* interrupting lines. * Therefore, read the mask register and and out those lines * not enabled. Note that some documentation has 21 and a1 * write only. This is not true. */ pic = inb(0x20) | (inb(0xA0) << 8); /* read isr */ pic &= 0xFFFB; /* mask out cascade & hibits */ while (pic) { int j = ffz(~pic); pic &= pic - 1; handle_irq(j, regs); } } #endif