# # For a description of the syntax of this configuration file, # see the Configure script. # mainmenu_name "Linux Kernel Configuration" define_bool CONFIG_ARM y define_bool CONFIG_UID16 y mainmenu_option next_comment comment 'Code maturity level options' bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL endmenu mainmenu_option next_comment comment 'System and processor type' choice 'ARM system type' \ "Archimedes CONFIG_ARCH_ARC \ A5000 CONFIG_ARCH_A5K \ RiscPC CONFIG_ARCH_RPC \ EBSA-110 CONFIG_ARCH_EBSA110 \ FootBridge-based CONFIG_FOOTBRIDGE" RiscPC # SA1100-based CONFIG_ARCH_SA1100 if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then bool 'FootBridge in HOST mode' CONFIG_HOST_FOOTBRIDGE if [ "$CONFIG_HOST_FOOTBRIDGE" = "y" ]; then define_bool CONFIG_ADDIN_FOOTBRIDGE n else define_bool CONFIG_ADDIN_FOOTBRIDGE y fi fi if [ "$CONFIG_HOST_FOOTBRIDGE" = "y" ]; then bool ' Include support for EBSA285' CONFIG_ARCH_EBSA285 bool ' Include support for CATS' CONFIG_CATS bool ' Include support for NetWinder' CONFIG_ARCH_NETWINDER fi if [ "$CONFIG_ADDIN_FOOTBRIDGE" = "y" ]; then # If we get any other footbridge-based plug-in boards, then # add your architecture options here define_bool CONFIG_ARCH_CO285 y fi if [ "$CONFIG_ARCH_SA1100" = "y" ]; then choice 'SA1100 implementation' \ "Brutus CONFIG_SA1100_BRUTUS \ Empeg CONFIG_SA1100_EMPEG \ Itsy CONFIG_SA1100_ITSY \ LART CONFIG_SA1100_LART \ PLEB CONFIG_SA1100_PLEB \ Victor CONFIG_SA1100_VICTOR \ Tifon CONFIG_SA1100_TIFON" Brutus fi # # Select various configuration options depending on the machine type # Easy check for Acorn-style architectures # if [ "$CONFIG_ARCH_ARC" = "y" -o \ "$CONFIG_ARCH_A5K" = "y" -o \ "$CONFIG_ARCH_RPC" = "y" ]; then define_bool CONFIG_ARCH_ACORN y else define_bool CONFIG_ARCH_ACORN n fi # # Figure out whether this system uses 26-bit or 32-bit CPUs. Nobody has # ever built a machine that can take both, and now that ARM3 is obsolete # nobody is likely to either. # if [ "$CONFIG_ARCH_ARC" = "y" -o \ "$CONFIG_ARCH_A5K" = "y" ]; then define_bool CONFIG_CPU_32 n define_bool CONFIG_CPU_26 y # # Select memory size # bool '2MB physical memory' CONFIG_PAGESIZE_16 else define_bool CONFIG_CPU_32 y define_bool CONFIG_CPU_26 n # # Select CPU and optimisation dependent on architecture # if [ "$CONFIG_ARCH_EBSA110" = "y" -o \ "$CONFIG_ARCH_SA1100" = "y" -o \ "$CONFIG_FOOTBRIDGE" = "y" -o \ "$CONFIG_ARCH_NEXUSPCI" = "y" ]; then define_bool CONFIG_CPU_32v4 y if [ "$CONFIG_ARCH_SA1100" = "y" ]; then define_bool CONFIG_CPU_SA1100 y else define_bool CONFIG_CPU_SA110 y fi else if [ "$CONFIG_ARCH_RPC" = "y" ]; then define_bool CONFIG_CPU_32v3 y bool 'Support ARM610' CONFIG_CPU_ARM6 bool 'Support ARM710' CONFIG_CPU_ARM7 bool 'Support StrongARM110' CONFIG_CPU_SA110 fi fi fi # # These machines always have PCI # if [ "$CONFIG_ARCH_NEXUSPCI" = "y" -o \ "$CONFIG_HOST_FOOTBRIDGE" = "y" ]; then define_bool CONFIG_PCI y source drivers/pci/Config.in fi # # These machines have ISA-DMA # if [ "$CONFIG_CATS" = "y" -o \ "$CONFIG_ARCH_NETWINDER" = "y" ]; then define_bool CONFIG_ISA_DMA y else define_bool CONFIG_ISA_DMA n fi if [ "$CONFIG_CPU_32" = "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then bool 'Kernel-mode alignment trap handler' CONFIG_ALIGNMENT_TRAP fi #bool 'Split text into discardable sections' CONFIG_TEXT_SECTIONS endmenu mainmenu_option next_comment comment 'Loadable module support' bool 'Enable loadable module support' CONFIG_MODULES if [ "$CONFIG_MODULES" = "y" ]; then bool ' Set version information on all symbols for modules' CONFIG_MODVERSIONS bool ' Kernel module loader' CONFIG_KMOD fi endmenu mainmenu_option next_comment comment 'General setup' bool 'Networking support' CONFIG_NET bool 'System V IPC' CONFIG_SYSVIPC bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT bool 'Sysctl support' CONFIG_SYSCTL tristate 'Math emulation' CONFIG_NWFPE if [ "$CONFIG_PROC_FS" = "y" ]; then choice 'Kernel core (/proc/kcore) format' \ "ELF CONFIG_KCORE_ELF \ A.OUT CONFIG_KCORE_AOUT" ELF fi tristate 'Kernel support for a.out binaries' CONFIG_BINFMT_AOUT tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC if [ "$CONFIG_CPU_32" = "y" ]; then tristate 'RISC OS personality' CONFIG_ARTHUR fi source drivers/parport/Config.in if [ "$CONFIG_ARCH_EBSA110" = "y" -o \ "$CONFIG_ARCH_SA1100" = "y" -o \ "$CONFIG_ARCH_NETWINDER" = "y" -o \ "$CONFIG_CATS" = "y" ]; then string 'Initial kernel command string' CONFIG_CMDLINE fi if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \ "$CONFIG_ARCH_EBSA110" = "y" -o \ "$CONFIG_ARCH_EBSA285" = "y" -o \ "$CONFIG_ARCH_CO285" = "y" ]; then bool 'Timer and CPU usage LEDs' CONFIG_LEDS if [ "$CONFIG_LEDS" = "y" ]; then if [ "$CONFIG_ARCH_NETWINDER" = "y" -o \ "$CONFIG_ARCH_EBSA285" = "y" -o \ "$CONFIG_ARCH_CO285" = "y" ]; then bool ' Timer LED' CONFIG_LEDS_TIMER bool ' CPU usage LED' CONFIG_LEDS_CPU fi fi fi endmenu source drivers/i2o/Config.in source drivers/pnp/Config.in source drivers/block/Config.in if [ "$CONFIG_ARCH_ACORN" = "y" ]; then source drivers/acorn/block/Config.in fi source drivers/char/Config.in if [ "$CONFIG_ARCH_ACORN" = "y" ]; then if [ "$CONFIG_BUSMOUSE" = "y" ]; then if [ "$CONFIG_ARCH_RPC" != "y" ]; then define_bool CONFIG_KBDMOUSE y else define_bool CONFIG_RPCMOUSE y fi fi fi source drivers/usb/Config.in if [ "$CONFIG_VT" = "y" ]; then mainmenu_option next_comment comment 'Console drivers' if [ "$CONFIG_ARCH_ACORN" != "y" -a "$CONFIG_ARCH_EBSA110" != "y" ]; then bool 'VGA text console' CONFIG_VGA_CONSOLE fi bool 'Support Frame buffer devices' CONFIG_FB source drivers/video/Config.in endmenu fi if [ "$CONFIG_NET" = "y" ]; then source net/Config.in source net/ax25/Config.in source net/irda/Config.in mainmenu_option next_comment comment 'Network device support' bool 'Network device support?' CONFIG_NETDEVICES if [ "$CONFIG_NETDEVICES" = "y" ]; then source drivers/net/Config.in fi endmenu fi # mainmenu_option next_comment # comment 'ISDN subsystem' # # tristate 'ISDN support' CONFIG_ISDN # if [ "$CONFIG_ISDN" != "n" ]; then # source drivers/isdn/Config.in # fi # endmenu mainmenu_option next_comment comment 'SCSI support' tristate 'SCSI support?' CONFIG_SCSI if [ "$CONFIG_SCSI" != "n" ]; then source drivers/scsi/Config.in fi endmenu if [ "$CONFIG_ARCH_ACORN" = "y" -o "$CONFIG_PCI" = "y" ]; then mainmenu_option next_comment comment 'Sound' tristate 'Sound support' CONFIG_SOUND if [ "$CONFIG_SOUND" != "n" ]; then source drivers/sound/Config.in fi endmenu fi source fs/Config.in mainmenu_option next_comment comment 'Kernel hacking' bool 'Compile kernel with frame pointer (for useful debugging)' CONFIG_FRAME_POINTER bool 'Verbose kernel error messages' CONFIG_DEBUG_ERRORS bool 'Verbose user fault messages' CONFIG_DEBUG_USER bool 'Include debugging information in kernel binary' CONFIG_DEBUG_INFO #bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ if [ "$CONFIG_CPU_26" = "y" ]; then bool 'Disable pgtable cache' CONFIG_NO_PGT_CACHE fi if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then # These options are only for real kernel hackers # who want to get their hands dirty. bool 'Kernel low-level debugging functions' CONFIG_DEBUG_LL if [ "$CONFIG_DEBUG_LL" = "y" ]; then if [ "$CONFIG_FOOTBRIDGE" = "y" ]; then bool 'Kernel low-level debugging messages via DC21285 port' CONFIG_DEBUG_DC21285_PORT fi fi fi endmenu