/* * linux/arch/i386/head.S -- the 32-bit startup code. * * Copyright (C) 1991, 1992 Linus Torvalds * * Enhanced CPU detection and feature setting code by Mike Jagdis * and Martin Mares, November 1997. */ .text #include #include #include #include #include #include #include #define OLD_CL_MAGIC_ADDR 0x90020 #define OLD_CL_MAGIC 0xA33F #define OLD_CL_BASE_ADDR 0x90000 #define OLD_CL_OFFSET 0x90022 #define NEW_CL_POINTER 0x228 /* Relative to real mode data */ /* * References to members of the boot_cpu_data structure. */ #define CPU_PARAMS SYMBOL_NAME(boot_cpu_data) #define X86 CPU_PARAMS+0 #define X86_VENDOR CPU_PARAMS+1 #define X86_MODEL CPU_PARAMS+2 #define X86_MASK CPU_PARAMS+3 #define X86_HARD_MATH CPU_PARAMS+6 #define X86_CPUID CPU_PARAMS+8 #define X86_CAPABILITY CPU_PARAMS+12 #define X86_VENDOR_ID CPU_PARAMS+16 /* * swapper_pg_dir is the main page directory, address 0x00101000 * * On entry, %esi points to the real-mode code as a 32-bit pointer. */ ENTRY(stext) ENTRY(_stext) startup_32: /* * Set segments to known values */ cld movl $(__KERNEL_DS),%eax movl %eax,%ds movl %eax,%es movl %eax,%fs movl %eax,%gs #ifdef CONFIG_SMP orw %bx,%bx jz 1f /* * New page tables may be in 4Mbyte page mode and may * be using the global pages. * * NOTE! If we are on a 486 we may have no cr4 at all! * So we do not try to touch it unless we really have * some bits in it to set. This won't work if the BSP * implements cr4 but this AP does not -- very unlikely * but be warned! The same applies to the pse feature * if not equally supported. --macro * * NOTE! We have to correct for the fact that we're * not yet offset PAGE_OFFSET.. */ #define cr4_bits mmu_cr4_features-__PAGE_OFFSET cmpl $0,cr4_bits je 3f movl %cr4,%eax # Turn on paging options (PSE,PAE,..) orl cr4_bits,%eax movl %eax,%cr4 jmp 3f 1: #endif /* * Initialize page tables */ movl $pg0-__PAGE_OFFSET,%edi /* initialize page tables */ movl $007,%eax /* "007" doesn't mean with right to kill, but PRESENT+RW+USER */ 2: stosl add $0x1000,%eax cmp $empty_zero_page-__PAGE_OFFSET,%edi jne 2b /* * Enable paging */ 3: movl $swapper_pg_dir-__PAGE_OFFSET,%eax movl %eax,%cr3 /* set the page table pointer.. */ movl %cr0,%eax orl $0x80000000,%eax movl %eax,%cr0 /* ..and set paging (PG) bit */ jmp 1f /* flush the prefetch-queue */ 1: movl $1f,%eax jmp *%eax /* make sure eip is relocated */ 1: /* Set up the stack pointer */ lss stack_start,%esp #ifdef CONFIG_SMP orw %bx,%bx jz 1f /* Initial CPU cleans BSS */ pushl $0 popfl jmp checkCPUtype 1: #endif CONFIG_SMP /* * Clear BSS first so that there are no surprises... */ xorl %eax,%eax movl $ SYMBOL_NAME(__bss_start),%edi movl $ SYMBOL_NAME(_end),%ecx subl %edi,%ecx cld rep stosb /* * start system 32-bit setup. We need to re-do some of the things done * in 16-bit mode for the "real" operations. */ call setup_idt /* * Initialize eflags. Some BIOS's leave bits like NT set. This would * confuse the debugger if this code is traced. * XXX - best to initialize before switching to protected mode. */ pushl $0 popfl /* * Copy bootup parameters out of the way. First 2kB of * _empty_zero_page is for boot parameters, second 2kB * is for the command line. * * Note: %esi still has the pointer to the real-mode data. */ movl $ SYMBOL_NAME(empty_zero_page),%edi movl $512,%ecx cld rep movsl xorl %eax,%eax movl $512,%ecx rep stosl movl SYMBOL_NAME(empty_zero_page)+NEW_CL_POINTER,%esi andl %esi,%esi jnz 2f # New command line protocol cmpw $(OLD_CL_MAGIC),OLD_CL_MAGIC_ADDR jne 1f movzwl OLD_CL_OFFSET,%esi addl $(OLD_CL_BASE_ADDR),%esi 2: movl $ SYMBOL_NAME(empty_zero_page)+2048,%edi movl $512,%ecx rep movsl 1: #ifdef CONFIG_SMP checkCPUtype: #endif movl $-1,X86_CPUID # -1 for no CPUID initially /* check if it is 486 or 386. */ /* * XXX - this does a lot of unnecessary setup. Alignment checks don't * apply at our cpl of 0 and the stack ought to be aligned already, and * we don't need to preserve eflags. */ movl $3,X86 # at least 386 pushfl # push EFLAGS popl %eax # get EFLAGS movl %eax,%ecx # save original EFLAGS xorl $0x40000,%eax # flip AC bit in EFLAGS pushl %eax # copy to EFLAGS popfl # set EFLAGS pushfl # get new EFLAGS popl %eax # put it in eax xorl %ecx,%eax # change in flags andl $0x40000,%eax # check if AC bit changed je is386 movl $4,X86 # at least 486 movl %ecx,%eax xorl $0x200000,%eax # check ID flag pushl %eax popfl # if we are on a straight 486DX, SX, or pushfl # 487SX we can't change it popl %eax xorl %ecx,%eax pushl %ecx # restore original EFLAGS popfl andl $0x200000,%eax je is486 /* get vendor info */ xorl %eax,%eax # call CPUID with 0 -> return vendor ID cpuid movl %eax,X86_CPUID # save CPUID level movl %ebx,X86_VENDOR_ID # lo 4 chars movl %edx,X86_VENDOR_ID+4 # next 4 chars movl %ecx,X86_VENDOR_ID+8 # last 4 chars orl %eax,%eax # do we have processor info as well? je is486 movl $1,%eax # Use the CPUID instruction to get CPU type cpuid movb %al,%cl # save reg for future use andb $0x0f,%ah # mask processor family movb %ah,X86 andb $0xf0,%al # mask model shrb $4,%al movb %al,X86_MODEL andb $0x0f,%cl # mask mask revision movb %cl,X86_MASK movl %edx,X86_CAPABILITY is486: movl %cr0,%eax # 486 or better andl $0x80000011,%eax # Save PG,PE,ET orl $0x50022,%eax # set AM, WP, NE and MP jmp 2f is386: pushl %ecx # restore original EFLAGS popfl movl %cr0,%eax # 386 andl $0x80000011,%eax # Save PG,PE,ET orl $2,%eax # set MP 2: movl %eax,%cr0 call check_x87 #ifdef CONFIG_SMP incb ready #endif lgdt gdt_descr lidt idt_descr ljmp $(__KERNEL_CS),$1f 1: movl $(__KERNEL_DS),%eax # reload all the segment registers movl %eax,%ds # after changing gdt. movl %eax,%es movl %eax,%fs movl %eax,%gs #ifdef CONFIG_SMP movl $(__KERNEL_DS), %eax movl %eax,%ss # Reload the stack pointer (segment only) #else lss stack_start,%esp # Load processor stack #endif xorl %eax,%eax lldt %ax cld # gcc2 wants the direction flag cleared at all times #ifdef CONFIG_SMP movb ready, %cl cmpb $1,%cl je 1f # the first CPU calls start_kernel # all other CPUs call initialize_secondary call SYMBOL_NAME(initialize_secondary) jmp L6 1: #endif call SYMBOL_NAME(start_kernel) L6: jmp L6 # main should never return here, but # just in case, we know what happens. #ifdef CONFIG_SMP ready: .byte 0 #endif /* * We depend on ET to be correct. This checks for 287/387. */ check_x87: movb $0,X86_HARD_MATH clts fninit fstsw %ax cmpb $0,%al je 1f movl %cr0,%eax /* no coprocessor: have to set bits */ xorl $4,%eax /* set EM */ movl %eax,%cr0 ret ALIGN 1: movb $1,X86_HARD_MATH .byte 0xDB,0xE4 /* fsetpm for 287, ignored by 387 */ ret /* * setup_idt * * sets up a idt with 256 entries pointing to * ignore_int, interrupt gates. It doesn't actually load * idt - that can be done only after paging has been enabled * and the kernel moved to PAGE_OFFSET. Interrupts * are enabled elsewhere, when we can be relatively * sure everything is ok. */ setup_idt: lea ignore_int,%edx movl $(__KERNEL_CS << 16),%eax movw %dx,%ax /* selector = 0x0010 = cs */ movw $0x8E00,%dx /* interrupt gate - dpl=0, present */ lea SYMBOL_NAME(idt_table),%edi mov $256,%ecx rp_sidt: movl %eax,(%edi) movl %edx,4(%edi) addl $8,%edi dec %ecx jne rp_sidt ret ENTRY(stack_start) .long SYMBOL_NAME(init_task_union)+8192 .long __KERNEL_DS /* This is the default interrupt "handler" :-) */ int_msg: .asciz "Unknown interrupt\n" ALIGN ignore_int: cld pushl %eax pushl %ecx pushl %edx pushl %es pushl %ds movl $(__KERNEL_DS),%eax movl %eax,%ds movl %eax,%es pushl $int_msg call SYMBOL_NAME(printk) popl %eax popl %ds popl %es popl %edx popl %ecx popl %eax iret /* * The interrupt descriptor table has room for 256 idt's, * the global descriptor table is dependent on the number * of tasks we can have.. */ #define IDT_ENTRIES 256 #define GDT_ENTRIES (__TSS(NR_CPUS)) .globl SYMBOL_NAME(idt) .globl SYMBOL_NAME(gdt) ALIGN .word 0 idt_descr: .word IDT_ENTRIES*8-1 # idt contains 256 entries SYMBOL_NAME(idt): .long SYMBOL_NAME(idt_table) .word 0 gdt_descr: .word GDT_ENTRIES*8-1 SYMBOL_NAME(gdt): .long SYMBOL_NAME(gdt_table) /* * This is initialized to create an identity-mapping at 0-8M (for bootup * purposes) and another mapping of the 0-8M area at virtual address * PAGE_OFFSET. */ .org 0x1000 ENTRY(swapper_pg_dir) .long 0x00102007 .long 0x00103007 .fill BOOT_USER_PGD_PTRS-2,4,0 /* default: 766 entries */ .long 0x00102007 .long 0x00103007 /* default: 254 entries */ .fill BOOT_KERNEL_PGD_PTRS-2,4,0 /* * The page tables are initialized to only 8MB here - the final page * tables are set up later depending on memory size. */ .org 0x2000 ENTRY(pg0) .org 0x3000 ENTRY(pg1) /* * empty_zero_page must immediately follow the page tables ! (The * initialization loop counts until empty_zero_page) */ .org 0x4000 ENTRY(empty_zero_page) .org 0x5000 ENTRY(empty_bad_page) .org 0x6000 ENTRY(empty_bad_pte_table) #if CONFIG_X86_PAE .org 0x7000 ENTRY(empty_bad_pmd_table) .org 0x8000 #else .org 0x7000 #endif /* * This starts the data section. Note that the above is all * in the text section because it has alignment requirements * that we cannot fulfill any other way. */ .data ALIGN /* * This contains typically 140 quadwords, depending on NR_CPUS. * * NOTE! Make sure the gdt descriptor in head.S matches this if you * change anything. */ ENTRY(gdt_table) .quad 0x0000000000000000 /* NULL descriptor */ .quad 0x0000000000000000 /* not used */ .quad 0x00cf9a000000ffff /* 0x10 kernel 4GB code at 0x00000000 */ .quad 0x00cf92000000ffff /* 0x18 kernel 4GB data at 0x00000000 */ .quad 0x00cffa000000ffff /* 0x23 user 4GB code at 0x00000000 */ .quad 0x00cff2000000ffff /* 0x2b user 4GB data at 0x00000000 */ .quad 0x0000000000000000 /* not used */ .quad 0x0000000000000000 /* not used */ /* * The APM segments have byte granularity and their bases * and limits are set at run time. */ .quad 0x0040920000000000 /* 0x40 APM set up for bad BIOS's */ .quad 0x00409a0000000000 /* 0x48 APM CS code */ .quad 0x00009a0000000000 /* 0x50 APM CS 16 code (16 bit) */ .quad 0x0040920000000000 /* 0x58 APM DS data */ .fill NR_CPUS*4,8,0 /* space for TSS's and LDT's */ /* * This is to aid debugging, the various locking macros will be putting * code fragments here. When an oops occurs we'd rather know that it's * inside the .text.lock section rather than as some offset from whatever * function happens to be last in the .text segment. */ .section .text.lock ENTRY(stext_lock)