/* mostly architecture independent some moved to i8259.c the beautiful visws architecture code needs to be updated too. and, finally, the BUILD_IRQ and SMP_BUILD macros in irq.h need fixed. */ /* * linux/arch/i386/kernel/irq.c * * Copyright (C) 1992, 1998 Linus Torvalds, Ingo Molnar * * This file contains the code used by various IRQ handling routines: * asking for different IRQ's should be done through these routines * instead of just grabbing them. Thus setups with different IRQ numbers * shouldn't result in any weird surprises, and installing new handlers * should be easier. */ /* * IRQs are in fact implemented a bit like signal handlers for the kernel. * Naturally it's not a 1:1 relation, but there are similarities. */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include unsigned int local_bh_count[NR_CPUS]; unsigned int local_irq_count[NR_CPUS]; extern atomic_t nmi_counter[NR_CPUS]; /* * Linux has a controller-independent x86 interrupt architecture. * every controller has a 'controller-template', that is used * by the main code to do the right thing. Each driver-visible * interrupt source is transparently wired to the apropriate * controller. Thus drivers need not be aware of the * interrupt-controller. * * Various interrupt controllers we handle: 8259 PIC, SMP IO-APIC, * PIIX4's internal 8259 PIC and SGI's Visual Workstation Cobalt (IO-)APIC. * (IO-APICs assumed to be messaging to Pentium local-APICs) * * the code is designed to be easily extended with new/different * interrupt controllers, without having to do assembly magic. */ /* * Micro-access to controllers is serialized over the whole * system. We never hold this lock when we call the actual * IRQ handler. */ spinlock_t irq_controller_lock = SPIN_LOCK_UNLOCKED; /* * Controller mappings for all interrupt sources: */ irq_desc_t irq_desc[NR_IRQS] __cacheline_aligned = { [0 ... NR_IRQS-1] = { 0, &no_irq_type, }}; /* * Special irq handlers. */ void no_action(int cpl, void *dev_id, struct pt_regs *regs) { } /* * Generic no controller code */ static void enable_none(unsigned int irq) { } static unsigned int startup_none(unsigned int irq) { return 0; } static void disable_none(unsigned int irq) { } static void ack_none(unsigned int irq) { /* * 'what should we do if we get a hw irq event on an illegal vector'. * each architecture has to answer this themselves, it doesnt deserve * a generic callback i think. */ #if CONFIG_X86 printk("unexpected IRQ trap at vector %02x\n", irq); #ifdef __SMP__ /* * Currently unexpected vectors happen only on SMP and APIC. * We _must_ ack these because every local APIC has only N * irq slots per priority level, and a 'hanging, unacked' IRQ * holds up an irq slot - in excessive cases (when multiple * unexpected vectors occur) that might lock up the APIC * completely. */ ack_APIC_irq(); #endif #endif } /* startup is the same as "enable", shutdown is same as "disable" */ #define shutdown_none disable_none #define end_none enable_none struct hw_interrupt_type no_irq_type = { "none", startup_none, shutdown_none, enable_none, disable_none, ack_none, end_none }; volatile unsigned long irq_err_count; /* * Generic, controller-independent functions: */ int get_irq_list(char *buf) { int i, j; struct irqaction * action; char *p = buf; p += sprintf(p, " "); for (j=0; jtypename); p += sprintf(p, " %s", action->name); for (action=action->next; action; action = action->next) p += sprintf(p, ", %s", action->name); *p++ = '\n'; } p += sprintf(p, "NMI: "); for (j = 0; j < smp_num_cpus; j++) p += sprintf(p, "%10u ", atomic_read(nmi_counter+cpu_logical_map(j))); p += sprintf(p, "\n"); #if CONFIG_SMP p += sprintf(p, "LOC: "); for (j = 0; j < smp_num_cpus; j++) p += sprintf(p, "%10u ", apic_timer_irqs[cpu_logical_map(j)]); p += sprintf(p, "\n"); #endif p += sprintf(p, "ERR: %10lu\n", irq_err_count); return p - buf; } /* * Global interrupt locks for SMP. Allow interrupts to come in on any * CPU, yet make cli/sti act globally to protect critical regions.. */ spinlock_t i386_bh_lock = SPIN_LOCK_UNLOCKED; #ifdef __SMP__ unsigned char global_irq_holder = NO_PROC_ID; unsigned volatile int global_irq_lock; atomic_t global_irq_count; atomic_t global_bh_count; atomic_t global_bh_lock; /* * "global_cli()" is a special case, in that it can hold the * interrupts disabled for a longish time, and also because * we may be doing TLB invalidates when holding the global * IRQ lock for historical reasons. Thus we may need to check * SMP invalidate events specially by hand here (but not in * any normal spinlocks) */ static inline void check_smp_invalidate(int cpu) { if (test_bit(cpu, &smp_invalidate_needed)) do_flush_tlb_local(); } static void show(char * str) { int i; unsigned long *stack; int cpu = smp_processor_id(); printk("\n%s, CPU %d:\n", str, cpu); printk("irq: %d [%d %d]\n", atomic_read(&global_irq_count), local_irq_count[0], local_irq_count[1]); printk("bh: %d [%d %d]\n", atomic_read(&global_bh_count), local_bh_count[0], local_bh_count[1]); stack = (unsigned long *) &stack; for (i = 40; i ; i--) { unsigned long x = *++stack; if (x > (unsigned long) &get_option && x < (unsigned long) &vsprintf) { printk("<[%08lx]> ", x); } } } #define MAXCOUNT 100000000 static inline void wait_on_bh(void) { int count = MAXCOUNT; do { if (!--count) { show("wait_on_bh"); count = ~0; } /* nothing .. wait for the other bh's to go away */ } while (atomic_read(&global_bh_count) != 0); } /* * I had a lockup scenario where a tight loop doing * spin_unlock()/spin_lock() on CPU#1 was racing with * spin_lock() on CPU#0. CPU#0 should have noticed spin_unlock(), but * apparently the spin_unlock() information did not make it * through to CPU#0 ... nasty, is this by design, do we have to limit * 'memory update oscillation frequency' artificially like here? * * Such 'high frequency update' races can be avoided by careful design, but * some of our major constructs like spinlocks use similar techniques, * it would be nice to clarify this issue. Set this define to 0 if you * want to check whether your system freezes. I suspect the delay done * by SYNC_OTHER_CORES() is in correlation with 'snooping latency', but * i thought that such things are guaranteed by design, since we use * the 'LOCK' prefix. */ #define SUSPECTED_CPU_OR_CHIPSET_BUG_WORKAROUND 0 #if SUSPECTED_CPU_OR_CHIPSET_BUG_WORKAROUND # define SYNC_OTHER_CORES(x) udelay(x+1) #else /* * We have to allow irqs to arrive between __sti and __cli */ # define SYNC_OTHER_CORES(x) __asm__ __volatile__ ("nop") #endif static inline void wait_on_irq(int cpu) { int count = MAXCOUNT; for (;;) { /* * Wait until all interrupts are gone. Wait * for bottom half handlers unless we're * already executing in one.. */ if (!atomic_read(&global_irq_count)) { if (local_bh_count[cpu] || !atomic_read(&global_bh_count)) break; } /* Duh, we have to loop. Release the lock to avoid deadlocks */ clear_bit(0,&global_irq_lock); for (;;) { if (!--count) { show("wait_on_irq"); count = ~0; } __sti(); SYNC_OTHER_CORES(cpu); __cli(); check_smp_invalidate(cpu); if (atomic_read(&global_irq_count)) continue; if (global_irq_lock) continue; if (!local_bh_count[cpu] && atomic_read(&global_bh_count)) continue; if (!test_and_set_bit(0,&global_irq_lock)) break; } } } /* * This is called when we want to synchronize with * bottom half handlers. We need to wait until * no other CPU is executing any bottom half handler. * * Don't wait if we're already running in an interrupt * context or are inside a bh handler. */ void synchronize_bh(void) { if (atomic_read(&global_bh_count) && !in_interrupt()) wait_on_bh(); } /* * This is called when we want to synchronize with * interrupts. We may for example tell a device to * stop sending interrupts: but to make sure there * are no interrupts that are executing on another * CPU we need to call this function. */ void synchronize_irq(void) { if (atomic_read(&global_irq_count)) { /* Stupid approach */ cli(); sti(); } } static inline void get_irqlock(int cpu) { if (test_and_set_bit(0,&global_irq_lock)) { /* do we already hold the lock? */ if ((unsigned char) cpu == global_irq_holder) return; /* Uhhuh.. Somebody else got it. Wait.. */ do { do { check_smp_invalidate(cpu); } while (test_bit(0,&global_irq_lock)); } while (test_and_set_bit(0,&global_irq_lock)); } /* * We also to make sure that nobody else is running * in an interrupt context. */ wait_on_irq(cpu); /* * Ok, finally.. */ global_irq_holder = cpu; } #define EFLAGS_IF_SHIFT 9 /* * A global "cli()" while in an interrupt context * turns into just a local cli(). Interrupts * should use spinlocks for the (very unlikely) * case that they ever want to protect against * each other. * * If we already have local interrupts disabled, * this will not turn a local disable into a * global one (problems with spinlocks: this makes * save_flags+cli+sti usable inside a spinlock). */ void __global_cli(void) { unsigned int flags; __save_flags(flags); if (flags & (1 << EFLAGS_IF_SHIFT)) { int cpu = smp_processor_id(); __cli(); if (!local_irq_count[cpu]) get_irqlock(cpu); } } void __global_sti(void) { int cpu = smp_processor_id(); if (!local_irq_count[cpu]) release_irqlock(cpu); __sti(); } /* * SMP flags value to restore to: * 0 - global cli * 1 - global sti * 2 - local cli * 3 - local sti */ unsigned long __global_save_flags(void) { int retval; int local_enabled; unsigned long flags; __save_flags(flags); local_enabled = (flags >> EFLAGS_IF_SHIFT) & 1; /* default to local */ retval = 2 + local_enabled; /* check for global flags if we're not in an interrupt */ if (!local_irq_count[smp_processor_id()]) { if (local_enabled) retval = 1; if (global_irq_holder == (unsigned char) smp_processor_id()) retval = 0; } return retval; } void __global_restore_flags(unsigned long flags) { switch (flags) { case 0: __global_cli(); break; case 1: __global_sti(); break; case 2: __cli(); break; case 3: __sti(); break; default: printk("global_restore_flags: %08lx (%08lx)\n", flags, (&flags)[-1]); } } #endif /* * This should really return information about whether * we should do bottom half handling etc. Right now we * end up _always_ checking the bottom half, which is a * waste of time and is not what some drivers would * prefer. */ int handle_IRQ_event(unsigned int irq, struct pt_regs * regs, struct irqaction * action) { int status; int cpu = smp_processor_id(); irq_enter(cpu, irq); status = 1; /* Force the "do bottom halves" bit */ if (!(action->flags & SA_INTERRUPT)) __sti(); do { status |= action->flags; action->handler(irq, action->dev_id, regs); action = action->next; } while (action); if (status & SA_SAMPLE_RANDOM) add_interrupt_randomness(irq); __cli(); irq_exit(cpu, irq); return status; } /* * Generic enable/disable code: this just calls * down into the PIC-specific version for the actual * hardware disable after having gotten the irq * controller lock. */ void disable_irq_nosync(unsigned int irq) { unsigned long flags; spin_lock_irqsave(&irq_controller_lock, flags); if (!irq_desc[irq].depth++) { irq_desc[irq].status |= IRQ_DISABLED; irq_desc[irq].handler->disable(irq); } spin_unlock_irqrestore(&irq_controller_lock, flags); } /* * Synchronous version of the above, making sure the IRQ is * no longer running on any other IRQ.. */ void disable_irq(unsigned int irq) { disable_irq_nosync(irq); if (!local_irq_count[smp_processor_id()]) { do { barrier(); } while (irq_desc[irq].status & IRQ_INPROGRESS); } } void enable_irq(unsigned int irq) { unsigned long flags; spin_lock_irqsave(&irq_controller_lock, flags); switch (irq_desc[irq].depth) { case 1: { unsigned int status = irq_desc[irq].status & ~IRQ_DISABLED; irq_desc[irq].status = status; if ((status & (IRQ_PENDING | IRQ_REPLAY)) == IRQ_PENDING) { irq_desc[irq].status = status | IRQ_REPLAY; hw_resend_irq(irq_desc[irq].handler,irq); } irq_desc[irq].handler->enable(irq); /* fall-through */ } default: irq_desc[irq].depth--; break; case 0: printk("enable_irq() unbalanced from %p\n", __builtin_return_address(0)); } spin_unlock_irqrestore(&irq_controller_lock, flags); } /* * do_IRQ handles all normal device IRQ's (the special * SMP cross-CPU interrupts have their own specific * handlers). */ asmlinkage unsigned int do_IRQ(struct pt_regs regs) { /* * We ack quickly, we don't want the irq controller * thinking we're snobs just because some other CPU has * disabled global interrupts (we have already done the * INT_ACK cycles, it's too late to try to pretend to the * controller that we aren't taking the interrupt). * * 0 return value means that this irq is already being * handled by some other CPU. (or is disabled) */ int irq = regs.orig_eax & 0xff; /* high bits used in ret_from_ code */ int cpu = smp_processor_id(); irq_desc_t *desc; struct irqaction * action; unsigned int status; kstat.irqs[cpu][irq]++; desc = irq_desc + irq; spin_lock(&irq_controller_lock); desc->handler->ack(irq); /* REPLAY is when Linux resends an IRQ that was dropped earlier WAITING is used by probe to mark irqs that are being tested */ status = desc->status & ~(IRQ_REPLAY | IRQ_WAITING); status |= IRQ_PENDING; /* we _want_ to handle it */ /* * If the IRQ is disabled for whatever reason, we cannot * use the action we have. */ action = NULL; if (!(status & (IRQ_DISABLED | IRQ_INPROGRESS))) { action = desc->action; status &= ~IRQ_PENDING; /* we commit to handling */ status |= IRQ_INPROGRESS; /* we are handling it */ } desc->status = status; spin_unlock(&irq_controller_lock); /* * If there is no IRQ handler or it was disabled, exit early. Since we set PENDING, if another processor is handling a different instance of this same irq, the other processor will take care of it. */ if (!action) return 1; /* * Edge triggered interrupts need to remember * pending events. * This applies to any hw interrupts that allow a second * instance of the same irq to arrive while we are in do_IRQ * or in the handler. But the code here only handles the _second_ * instance of the irq, not the third or fourth. So it is mostly * useful for irq hardware that does not mask cleanly in an * SMP environment. */ for (;;) { handle_IRQ_event(irq, ®s, action); spin_lock(&irq_controller_lock); if (!(desc->status & IRQ_PENDING)) break; desc->status &= ~IRQ_PENDING; spin_unlock(&irq_controller_lock); } desc->status &= ~IRQ_INPROGRESS; if (!(desc->status & IRQ_DISABLED)) desc->handler->end(irq); spin_unlock(&irq_controller_lock); /* * This should be conditional: we should really get * a return code from the irq handler to tell us * whether the handler wants us to do software bottom * half handling or not.. */ if (1) { if (bh_active & bh_mask) do_bottom_half(); } return 1; } int request_irq(unsigned int irq, void (*handler)(int, void *, struct pt_regs *), unsigned long irqflags, const char * devname, void *dev_id) { int retval; struct irqaction * action; #if 1 /* * Sanity-check: shared interrupts should REALLY pass in * a real dev-ID, otherwise we'll have trouble later trying * to figure out which interrupt is which (messes up the * interrupt freeing logic etc). */ if (irqflags & SA_SHIRQ) { if (!dev_id) printk("Bad boy: %s (at 0x%x) called us without a dev_id!\n", devname, (&irq)[-1]); } #endif if (irq >= NR_IRQS) return -EINVAL; if (!handler) return -EINVAL; action = (struct irqaction *) kmalloc(sizeof(struct irqaction), GFP_KERNEL); if (!action) return -ENOMEM; action->handler = handler; action->flags = irqflags; action->mask = 0; action->name = devname; action->next = NULL; action->dev_id = dev_id; retval = setup_irq(irq, action); if (retval) kfree(action); return retval; } void free_irq(unsigned int irq, void *dev_id) { struct irqaction **p; unsigned long flags; if (irq >= NR_IRQS) return; spin_lock_irqsave(&irq_controller_lock,flags); p = &irq_desc[irq].action; for (;;) { struct irqaction * action = *p; if (action) { struct irqaction **pp = p; p = &action->next; if (action->dev_id != dev_id) continue; /* Found it - now remove it from the list of entries */ *pp = action->next; if (!irq_desc[irq].action) { irq_desc[irq].status |= IRQ_DISABLED; irq_desc[irq].handler->shutdown(irq); } spin_unlock_irqrestore(&irq_controller_lock,flags); /* Wait to make sure it's not being used on another CPU */ while (irq_desc[irq].status & IRQ_INPROGRESS) barrier(); kfree(action); return; } printk("Trying to free free IRQ%d\n",irq); spin_unlock_irqrestore(&irq_controller_lock,flags); return; } } /* * IRQ autodetection code.. * * This depends on the fact that any interrupt that * comes in on to an unassigned handler will get stuck * with "IRQ_WAITING" cleared and the interrupt * disabled. */ unsigned long probe_irq_on(void) { unsigned int i; unsigned long delay; /* * first, enable any unassigned irqs */ spin_lock_irq(&irq_controller_lock); for (i = NR_IRQS-1; i > 0; i--) { if (!irq_desc[i].action) { irq_desc[i].status |= IRQ_AUTODETECT | IRQ_WAITING; if(irq_desc[i].handler->startup(i)) irq_desc[i].status |= IRQ_PENDING; } } spin_unlock_irq(&irq_controller_lock); /* * Wait for spurious interrupts to trigger */ for (delay = jiffies + HZ/10; time_after(delay, jiffies); ) /* about 100ms delay */ synchronize_irq(); /* * Now filter out any obviously spurious interrupts */ spin_lock_irq(&irq_controller_lock); for (i=0; ishutdown(i); } } spin_unlock_irq(&irq_controller_lock); return 0x12345678; } int probe_irq_off(unsigned long unused) { int i, irq_found, nr_irqs; if (unused != 0x12345678) printk("Bad IRQ probe from %lx\n", (&unused)[-1]); nr_irqs = 0; irq_found = 0; spin_lock_irq(&irq_controller_lock); for (i=0; ishutdown(i); } spin_unlock_irq(&irq_controller_lock); if (nr_irqs > 1) irq_found = -irq_found; return irq_found; } /* this was setup_x86_irq but it seems pretty generic */ int setup_irq(unsigned int irq, struct irqaction * new) { int shared = 0; struct irqaction *old, **p; unsigned long flags; /* * Some drivers like serial.c use request_irq() heavily, * so we have to be careful not to interfere with a * running system. */ if (new->flags & SA_SAMPLE_RANDOM) { /* * This function might sleep, we want to call it first, * outside of the atomic block. * Yes, this might clear the entropy pool if the wrong * driver is attempted to be loaded, without actually * installing a new handler, but is this really a problem, * only the sysadmin is able to do this. */ rand_initialize_irq(irq); } /* * The following block of code has to be executed atomically */ spin_lock_irqsave(&irq_controller_lock,flags); p = &irq_desc[irq].action; if ((old = *p) != NULL) { /* Can't share interrupts unless both agree to */ if (!(old->flags & new->flags & SA_SHIRQ)) { spin_unlock_irqrestore(&irq_controller_lock,flags); return -EBUSY; } /* add new interrupt at end of irq queue */ do { p = &old->next; old = *p; } while (old); shared = 1; } *p = new; if (!shared) { irq_desc[irq].depth = 0; irq_desc[irq].status &= ~IRQ_DISABLED; irq_desc[irq].handler->startup(irq); } spin_unlock_irqrestore(&irq_controller_lock,flags); return 0; }