/* * linux/arch/i386/kernel/time.c * * Copyright (C) 1991, 1992, 1995 Linus Torvalds * * This file contains the PC-specific time handling details: * reading the RTC at bootup, etc.. * 1994-07-02 Alan Modra * fixed set_rtc_mmss, fixed time.year for >= 2000, new mktime * 1995-03-26 Markus Kuhn * fixed 500 ms bug at call to set_rtc_mmss, fixed DS12887 * precision CMOS clock update * 1996-05-03 Ingo Molnar * fixed time warps in do_[slow|fast]_gettimeoffset() * 1997-09-10 Updated NTP code according to technical memorandum Jan '96 * "A Kernel Model for Precision Timekeeping" by Dave Mills * 1998-09-05 (Various) * More robust do_fast_gettimeoffset() algorithm implemented * (works with APM, Cyrix 6x86MX and Centaur C6), * monotonic gettimeofday() with fast_get_timeoffset(), * drift-proof precision TSC calibration on boot * (C. Scott Ananian , Andrew D. * Balsa , Philip Gladstone ; * ported from 2.0.35 Jumbo-9 by Michael Krause ). * 1998-12-16 Andrea Arcangeli * Fixed Jumbo-9 code in 2.1.131: do_gettimeofday was missing 1 jiffy * because was not accounting lost_ticks. * 1998-12-24 Copyright (C) 1998 Andrea Arcangeli * Fixed a xtime SMP race (we need the xtime_lock rw spinlock to * serialize accesses to xtime/lost_ticks). */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include /* * for x86_do_profile() */ #include unsigned long cpu_khz; /* Detected as we calibrate the TSC */ /* Number of usecs that the last interrupt was delayed */ static int delay_at_last_interrupt; static unsigned long last_tsc_low; /* lsb 32 bits of Time Stamp Counter */ /* Cached *multiplier* to convert TSC counts to microseconds. * (see the equation below). * Equal to 2^32 * (1 / (clocks per usec) ). * Initialized in time_init. */ unsigned long fast_gettimeoffset_quotient=0; extern rwlock_t xtime_lock; extern unsigned long wall_jiffies; spinlock_t rtc_lock = SPIN_LOCK_UNLOCKED; static inline unsigned long do_fast_gettimeoffset(void) { register unsigned long eax, edx; /* Read the Time Stamp Counter */ rdtsc(eax,edx); /* .. relative to previous jiffy (32 bits is enough) */ eax -= last_tsc_low; /* tsc_low delta */ /* * Time offset = (tsc_low delta) * fast_gettimeoffset_quotient * = (tsc_low delta) * (usecs_per_clock) * = (tsc_low delta) * (usecs_per_jiffy / clocks_per_jiffy) * * Using a mull instead of a divl saves up to 31 clock cycles * in the critical path. */ __asm__("mull %2" :"=a" (eax), "=d" (edx) :"g" (fast_gettimeoffset_quotient), "0" (eax)); /* our adjusted time offset in microseconds */ return delay_at_last_interrupt + edx; } #define TICK_SIZE tick spinlock_t i8253_lock = SPIN_LOCK_UNLOCKED; extern spinlock_t i8259A_lock; #ifndef CONFIG_X86_TSC /* This function must be called with interrupts disabled * It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs * * However, the pc-audio speaker driver changes the divisor so that * it gets interrupted rather more often - it loads 64 into the * counter rather than 11932! This has an adverse impact on * do_gettimeoffset() -- it stops working! What is also not * good is that the interval that our timer function gets called * is no longer 10.0002 ms, but 9.9767 ms. To get around this * would require using a different timing source. Maybe someone * could use the RTC - I know that this can interrupt at frequencies * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix * it so that at startup, the timer code in sched.c would select * using either the RTC or the 8253 timer. The decision would be * based on whether there was any other device around that needed * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz, * and then do some jiggery to have a version of do_timer that * advanced the clock by 1/1024 s. Every time that reached over 1/100 * of a second, then do all the old code. If the time was kept correct * then do_gettimeoffset could just return 0 - there is no low order * divider that can be accessed. * * Ideally, you would be able to use the RTC for the speaker driver, * but it appears that the speaker driver really needs interrupt more * often than every 120 us or so. * * Anyway, this needs more thought.... pjsg (1993-08-28) * * If you are really that interested, you should be reading * comp.protocols.time.ntp! */ static unsigned long do_slow_gettimeoffset(void) { int count; static int count_p = LATCH; /* for the first call after boot */ static unsigned long jiffies_p = 0; /* * cache volatile jiffies temporarily; we have IRQs turned off. */ unsigned long jiffies_t; /* gets recalled with irq locally disabled */ spin_lock(&i8253_lock); /* timer count may underflow right here */ outb_p(0x00, 0x43); /* latch the count ASAP */ count = inb_p(0x40); /* read the latched count */ /* * We do this guaranteed double memory access instead of a _p * postfix in the previous port access. Wheee, hackady hack */ jiffies_t = jiffies; count |= inb_p(0x40) << 8; spin_unlock(&i8253_lock); /* * avoiding timer inconsistencies (they are rare, but they happen)... * there are two kinds of problems that must be avoided here: * 1. the timer counter underflows * 2. hardware problem with the timer, not giving us continuous time, * the counter does small "jumps" upwards on some Pentium systems, * (see c't 95/10 page 335 for Neptun bug.) */ /* you can safely undefine this if you don't have the Neptune chipset */ #define BUGGY_NEPTUN_TIMER if( jiffies_t == jiffies_p ) { if( count > count_p ) { /* the nutcase */ int i; spin_lock(&i8259A_lock); /* * This is tricky when I/O APICs are used; * see do_timer_interrupt(). */ i = inb(0x20); spin_unlock(&i8259A_lock); /* assumption about timer being IRQ0 */ if (i & 0x01) { /* * We cannot detect lost timer interrupts ... * well, that's why we call them lost, don't we? :) * [hmm, on the Pentium and Alpha we can ... sort of] */ count -= LATCH; } else { #ifdef BUGGY_NEPTUN_TIMER /* * for the Neptun bug we know that the 'latch' * command doesnt latch the high and low value * of the counter atomically. Thus we have to * substract 256 from the counter * ... funny, isnt it? :) */ count -= 256; #else printk("do_slow_gettimeoffset(): hardware timer problem?\n"); #endif } } } else jiffies_p = jiffies_t; count_p = count; count = ((LATCH-1) - count) * TICK_SIZE; count = (count + LATCH/2) / LATCH; return count; } static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset; #else #define do_gettimeoffset() do_fast_gettimeoffset() #endif /* * This version of gettimeofday has microsecond resolution * and better than microsecond precision on fast x86 machines with TSC. */ void do_gettimeofday(struct timeval *tv) { unsigned long flags; unsigned long usec, sec; read_lock_irqsave(&xtime_lock, flags); usec = do_gettimeoffset(); { unsigned long lost = jiffies - wall_jiffies; if (lost) usec += lost * (1000000 / HZ); } sec = xtime.tv_sec; usec += xtime.tv_usec; read_unlock_irqrestore(&xtime_lock, flags); while (usec >= 1000000) { usec -= 1000000; sec++; } tv->tv_sec = sec; tv->tv_usec = usec; } void do_settimeofday(struct timeval *tv) { write_lock_irq(&xtime_lock); /* * This is revolting. We need to set "xtime" correctly. However, the * value in this location is the value at the most recent update of * wall time. Discover what correction gettimeofday() would have * made, and then undo it! */ tv->tv_usec -= do_gettimeoffset(); tv->tv_usec -= (jiffies - wall_jiffies) * (1000000 / HZ); while (tv->tv_usec < 0) { tv->tv_usec += 1000000; tv->tv_sec--; } xtime = *tv; time_adjust = 0; /* stop active adjtime() */ time_status |= STA_UNSYNC; time_maxerror = NTP_PHASE_LIMIT; time_esterror = NTP_PHASE_LIMIT; write_unlock_irq(&xtime_lock); } /* * In order to set the CMOS clock precisely, set_rtc_mmss has to be * called 500 ms after the second nowtime has started, because when * nowtime is written into the registers of the CMOS clock, it will * jump to the next second precisely 500 ms later. Check the Motorola * MC146818A or Dallas DS12887 data sheet for details. * * BUG: This routine does not handle hour overflow properly; it just * sets the minutes. Usually you'll only notice that after reboot! */ static int set_rtc_mmss(unsigned long nowtime) { int retval = 0; int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; /* gets recalled with irq locally disabled */ spin_lock(&rtc_lock); save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) BCD_TO_BIN(cmos_minutes); /* * since we're only adjusting minutes and seconds, * don't interfere with hour overflow. This avoids * messing with unknown time zones but requires your * RTC not to be off by more than 15 minutes */ real_seconds = nowtime % 60; real_minutes = nowtime / 60; if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) real_minutes += 30; /* correct for half hour time zone */ real_minutes %= 60; if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(real_seconds); BIN_TO_BCD(real_minutes); } CMOS_WRITE(real_seconds,RTC_SECONDS); CMOS_WRITE(real_minutes,RTC_MINUTES); } else { printk(KERN_WARNING "set_rtc_mmss: can't update from %d to %d\n", cmos_minutes, real_minutes); retval = -1; } /* The following flags have to be released exactly in this order, * otherwise the DS12887 (popular MC146818A clone with integrated * battery and quartz) will not reset the oscillator and will not * update precisely 500 ms later. You won't find this mentioned in * the Dallas Semiconductor data sheets, but who believes data * sheets anyway ... -- Markus Kuhn */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); spin_unlock(&rtc_lock); return retval; } /* last time the cmos clock got updated */ static long last_rtc_update = 0; int timer_ack = 0; /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ static inline void do_timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { #ifdef CONFIG_X86_IO_APIC if (timer_ack) { /* * Subtle, when I/O APICs are used we have to ack timer IRQ * manually to reset the IRR bit for do_slow_gettimeoffset(). * This will also deassert NMI lines for the watchdog if run * on an 82489DX-based system. */ spin_lock(&i8259A_lock); outb(0x0c, 0x20); /* Ack the IRQ; AEOI will end it automatically. */ inb(0x20); spin_unlock(&i8259A_lock); } #endif #ifdef CONFIG_VISWS /* Clear the interrupt */ co_cpu_write(CO_CPU_STAT,co_cpu_read(CO_CPU_STAT) & ~CO_STAT_TIMEINTR); #endif do_timer(regs); /* * In the SMP case we use the local APIC timer interrupt to do the * profiling, except when we simulate SMP mode on a uniprocessor * system, in that case we have to call the local interrupt handler. */ #ifndef CONFIG_X86_LOCAL_APIC if (!user_mode(regs)) x86_do_profile(regs->eip); #else if (!smp_found_config) smp_local_timer_interrupt(regs); #endif /* * If we have an externally synchronized Linux clock, then update * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ if ((time_status & STA_UNSYNC) == 0 && xtime.tv_sec > last_rtc_update + 660 && xtime.tv_usec >= 500000 - ((unsigned) tick) / 2 && xtime.tv_usec <= 500000 + ((unsigned) tick) / 2) { if (set_rtc_mmss(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ } #ifdef CONFIG_MCA if( MCA_bus ) { /* The PS/2 uses level-triggered interrupts. You can't turn them off, nor would you want to (any attempt to enable edge-triggered interrupts usually gets intercepted by a special hardware circuit). Hence we have to acknowledge the timer interrupt. Through some incredibly stupid design idea, the reset for IRQ 0 is done by setting the high bit of the PPI port B (0x61). Note that some PS/2s, notably the 55SX, work fine if this is removed. */ irq = inb_p( 0x61 ); /* read the current state */ outb_p( irq|0x80, 0x61 ); /* reset the IRQ */ } #endif } static int use_tsc = 0; /* * This is the same as the above, except we _also_ save the current * Time Stamp Counter value at the time of the timer interrupt, so that * we later on can estimate the time of day more exactly. */ static void timer_interrupt(int irq, void *dev_id, struct pt_regs *regs) { int count; /* * Here we are in the timer irq handler. We just have irqs locally * disabled but we don't know if the timer_bh is running on the other * CPU. We need to avoid to SMP race with it. NOTE: we don' t need * the irq version of write_lock because as just said we have irq * locally disabled. -arca */ write_lock(&xtime_lock); if (use_tsc) { /* * It is important that these two operations happen almost at * the same time. We do the RDTSC stuff first, since it's * faster. To avoid any inconsistencies, we need interrupts * disabled locally. */ /* * Interrupts are just disabled locally since the timer irq * has the SA_INTERRUPT flag set. -arca */ /* read Pentium cycle counter */ rdtscl(last_tsc_low); spin_lock(&i8253_lock); outb_p(0x00, 0x43); /* latch the count ASAP */ count = inb_p(0x40); /* read the latched count */ count |= inb(0x40) << 8; spin_unlock(&i8253_lock); count = ((LATCH-1) - count) * TICK_SIZE; delay_at_last_interrupt = (count + LATCH/2) / LATCH; } do_timer_interrupt(irq, NULL, regs); write_unlock(&xtime_lock); } /* not static: needed by APM */ unsigned long get_cmos_time(void) { unsigned int year, mon, day, hour, min, sec; int i; /* The Linux interpretation of the CMOS clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the * RTC registers show the second which has precisely just started. * Let's hope other operating systems interpret the RTC the same way. */ /* read RTC exactly on falling edge of update flag */ for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) break; for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) break; do { /* Isn't this overkill ? UIP above should guarantee consistency */ sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); hour = CMOS_READ(RTC_HOURS); day = CMOS_READ(RTC_DAY_OF_MONTH); mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); } while (sec != CMOS_READ(RTC_SECONDS)); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BCD_TO_BIN(sec); BCD_TO_BIN(min); BCD_TO_BIN(hour); BCD_TO_BIN(day); BCD_TO_BIN(mon); BCD_TO_BIN(year); } if ((year += 1900) < 1970) year += 100; return mktime(year, mon, day, hour, min, sec); } static struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL}; /* ------ Calibrate the TSC ------- * Return 2^32 * (1 / (TSC clocks per usec)) for do_fast_gettimeoffset(). * Too much 64-bit arithmetic here to do this cleanly in C, and for * accuracy's sake we want to keep the overhead on the CTC speaker (channel 2) * output busy loop as low as possible. We avoid reading the CTC registers * directly because of the awkward 8-bit access mechanism of the 82C54 * device. */ #define CALIBRATE_LATCH (5 * LATCH) #define CALIBRATE_TIME (5 * 1000020/HZ) static unsigned long __init calibrate_tsc(void) { /* Set the Gate high, disable speaker */ outb((inb(0x61) & ~0x02) | 0x01, 0x61); /* * Now let's take care of CTC channel 2 * * Set the Gate high, program CTC channel 2 for mode 0, * (interrupt on terminal count mode), binary count, * load 5 * LATCH count, (LSB and MSB) to begin countdown. */ outb(0xb0, 0x43); /* binary, mode 0, LSB/MSB, Ch 2 */ outb(CALIBRATE_LATCH & 0xff, 0x42); /* LSB of count */ outb(CALIBRATE_LATCH >> 8, 0x42); /* MSB of count */ { unsigned long startlow, starthigh; unsigned long endlow, endhigh; unsigned long count; rdtsc(startlow,starthigh); count = 0; do { count++; } while ((inb(0x61) & 0x20) == 0); rdtsc(endlow,endhigh); last_tsc_low = endlow; /* Error: ECTCNEVERSET */ if (count <= 1) goto bad_ctc; /* 64-bit subtract - gcc just messes up with long longs */ __asm__("subl %2,%0\n\t" "sbbl %3,%1" :"=a" (endlow), "=d" (endhigh) :"g" (startlow), "g" (starthigh), "0" (endlow), "1" (endhigh)); /* Error: ECPUTOOFAST */ if (endhigh) goto bad_ctc; /* Error: ECPUTOOSLOW */ if (endlow <= CALIBRATE_TIME) goto bad_ctc; __asm__("divl %2" :"=a" (endlow), "=d" (endhigh) :"r" (endlow), "0" (0), "1" (CALIBRATE_TIME)); return endlow; } /* * The CTC wasn't reliable: we got a hit on the very first read, * or the CPU was so fast/slow that the quotient wouldn't fit in * 32 bits.. */ bad_ctc: return 0; } void __init time_init(void) { extern int x86_udelay_tsc; xtime.tv_sec = get_cmos_time(); xtime.tv_usec = 0; /* * If we have APM enabled or the CPU clock speed is variable * (CPU stops clock on HLT or slows clock to save power) * then the TSC timestamps may diverge by up to 1 jiffy from * 'real time' but nothing will break. * The most frequent case is that the CPU is "woken" from a halt * state by the timer interrupt itself, so we get 0 error. In the * rare cases where a driver would "wake" the CPU and request a * timestamp, the maximum error is < 1 jiffy. But timestamps are * still perfectly ordered. * Note that the TSC counter will be reset if APM suspends * to disk; this won't break the kernel, though, 'cuz we're * smart. See arch/i386/kernel/apm.c. */ /* * Firstly we have to do a CPU check for chips with * a potentially buggy TSC. At this point we haven't run * the ident/bugs checks so we must run this hook as it * may turn off the TSC flag. * * NOTE: this doesnt yet handle SMP 486 machines where only * some CPU's have a TSC. Thats never worked and nobody has * moaned if you have the only one in the world - you fix it! */ dodgy_tsc(); if (cpu_has_tsc) { unsigned long tsc_quotient = calibrate_tsc(); if (tsc_quotient) { fast_gettimeoffset_quotient = tsc_quotient; use_tsc = 1; /* * We could be more selective here I suspect * and just enable this for the next intel chips ? */ x86_udelay_tsc = 1; #ifndef do_gettimeoffset do_gettimeoffset = do_fast_gettimeoffset; #endif do_get_fast_time = do_gettimeofday; /* report CPU clock rate in Hz. * The formula is (10^6 * 2^32) / (2^32 * 1 / (clocks/us)) = * clock/second. Our precision is about 100 ppm. */ { unsigned long eax=0, edx=1000; __asm__("divl %2" :"=a" (cpu_khz), "=d" (edx) :"r" (tsc_quotient), "0" (eax), "1" (edx)); printk("Detected %lu.%03lu MHz processor.\n", cpu_khz / 1000, cpu_khz % 1000); } } } #ifdef CONFIG_VISWS printk("Starting Cobalt Timer system clock\n"); /* Set the countdown value */ co_cpu_write(CO_CPU_TIMEVAL, CO_TIME_HZ/HZ); /* Start the timer */ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) | CO_CTRL_TIMERUN); /* Enable (unmask) the timer interrupt */ co_cpu_write(CO_CPU_CTRL, co_cpu_read(CO_CPU_CTRL) & ~CO_CTRL_TIMEMASK); /* Wire cpu IDT entry to s/w handler (and Cobalt APIC to IDT) */ setup_irq(CO_IRQ_TIMER, &irq0); #else setup_irq(0, &irq0); #endif }