# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
mainmenu_name "Kernel configuration of Linux for IA-64 machines"

mainmenu_option next_comment
comment 'General setup'

define_bool CONFIG_IA64 y

define_bool CONFIG_ISA n
define_bool CONFIG_SBUS n

choice 'IA-64 system type'					\
	"Generic		CONFIG_IA64_GENERIC		\
	 HP-simulator		CONFIG_IA64_HP_SIM		\
	 SN1-simulator		CONFIG_IA64_SGI_SN1_SIM		\
	 DIG-compliant		CONFIG_IA64_DIG" Generic

choice 'Kernel page size'						\
	"4KB			CONFIG_IA64_PAGE_SIZE_4KB		\
	 8KB			CONFIG_IA64_PAGE_SIZE_8KB		\
	 16KB			CONFIG_IA64_PAGE_SIZE_16KB		\
	 64KB			CONFIG_IA64_PAGE_SIZE_64KB" 16KB

if [ "$CONFIG_IA64_DIG" = "y" ]; then
	define_bool CONFIG_ITANIUM y
	define_bool CONFIG_IA64_BRL_EMU y
	bool '  Enable Itanium A-step specific code' CONFIG_ITANIUM_ASTEP_SPECIFIC
	bool '  Enable Itanium A1-step specific code' CONFIG_ITANIUM_A1_SPECIFIC
	bool '  Enable use of global TLB purge instruction (ptc.g)' CONFIG_ITANIUM_PTCG
	bool '  Enable SoftSDV hacks' CONFIG_IA64_SOFTSDV_HACKS
	bool '  Enable AzusA hacks' CONFIG_IA64_AZUSA_HACKS
	bool '  Emulate PAL/SAL/EFI firmware' CONFIG_IA64_FW_EMU
	bool '  Enable IA64 Machine Check Abort' CONFIG_IA64_MCA
fi

if [ "$CONFIG_IA64_GENERIC" = "y" ]; then
	define_bool CONFIG_IA64_SOFTSDV_HACKS y
fi

if [ "$CONFIG_IA64_SGI_SN1_SIM" = "y" ]; then
	define_bool CONFIG_NUMA y
	define_bool CONFIG_IA64_SOFTSDV_HACKS y
fi

define_bool CONFIG_KCORE_ELF y	# On IA-64, we always want an ELF /proc/kcore.

bool 'SMP support' CONFIG_SMP
bool 'Performance monitor support' CONFIG_PERFMON
bool '/proc/palinfo support' CONFIG_IA64_PALINFO

bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL
tristate 'Kernel support for ELF binaries' CONFIG_BINFMT_ELF
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

bool 'PCI support' CONFIG_PCI
source drivers/pci/Config.in

bool 'Support for hot-pluggable devices' CONFIG_HOTPLUG
if [ "$CONFIG_HOTPLUG" = "y" ]; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi

mainmenu_option next_comment
 comment 'Code maturity level options'
 bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
 comment 'Loadable module support'
 bool 'Enable loadable module support' CONFIG_MODULES
 if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel module loader' CONFIG_KMOD
 fi
endmenu

source drivers/parport/Config.in

endmenu

source drivers/pnp/Config.in
source drivers/block/Config.in
source drivers/i2o/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'ATA/IDE/MFM/RLL support'

tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE

if [ "$CONFIG_IDE" != "n" ]; then
  source drivers/ide/Config.in
else
  define_bool CONFIG_BLK_DEV_IDE_MODES n
  define_bool CONFIG_BLK_DEV_HD n
fi
endmenu

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
  bool 'Simulated SCSI disk' CONFIG_SCSI_SIM
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
  fi
  endmenu
fi

source net/ax25/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'

bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

source drivers/char/Config.in
#source drivers/misc/Config.in

source fs/Config.in

source fs/nls/Config.in

if [ "$CONFIG_VT" = "y" ]; then
  mainmenu_option next_comment
  comment 'Console drivers'
  bool 'VGA text console' CONFIG_VGA_CONSOLE
  source drivers/video/Config.in
  if [ "$CONFIG_FB" = "y" ]; then
    define_bool CONFIG_PCI_CONSOLE y
  fi
  endmenu
fi

mainmenu_option next_comment
comment 'Sound'

tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  source drivers/sound/Config.in
fi
endmenu

source drivers/usb/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for IA-32 emulation' CONFIG_IA32_SUPPORT
  tristate 'Kernel FP software completion' CONFIG_MATHEMU
else
  define_bool CONFIG_MATHEMU y
fi

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool 'Early printk support (requires VGA!)' CONFIG_IA64_EARLY_PRINTK
bool 'Turn on compare-and-exchange bug checking (slow!)' CONFIG_IA64_DEBUG_CMPXCHG
bool 'Turn on irq debug checks (slow!)' CONFIG_IA64_DEBUG_IRQ
bool 'Print possible IA64 hazards to console' CONFIG_IA64_PRINT_HAZARDS
bool 'Enable new unwind support' CONFIG_IA64_NEW_UNWIND

endmenu