#
# For a description of the syntax of this configuration file,
# see Documentation/kbuild/config-language.txt.
#
define_bool CONFIG_MIPS y

mainmenu_name "Linux Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Machine selection'
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
   bool 'Support for Acer PICA 1 chipset' CONFIG_ACER_PICA_61
   bool 'Support for Algorithmics P4032 (EXPERIMENTAL)' CONFIG_ALGOR_P4032
   bool 'Support for BAGET MIPS series (EXPERIMENTAL)' CONFIG_BAGET_MIPS
   bool 'Support for DECstations (EXPERIMENTAL)' CONFIG_DECSTATION
   bool 'Support for NEC DDB Vrc-5074 (EXPERIMENTAL)' CONFIG_DDB5074
   bool 'Support for Galileo EV96100 Evaluation board' CONFIG_MIPS_EV96100
   bool 'Support for Galileo EV64120 Evaluation board' CONFIG_MIPS_EV64120
   if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
		  bool 'Enable Second PCI (PCI1)' CONFIG_EVB_PCI1
      choice 'Galileo Chip Clock' \
        "75 CONFIG_SYSCLK_75\
         83.3 CONFIG_SYSCLK_83\
         100 CONFIG_SYSCLK_100" CONFIG_SYSCLK_83
   fi
   bool 'Support for MIPS Atlas board' CONFIG_MIPS_ATLAS
   bool 'Support for MIPS Malta board' CONFIG_MIPS_MALTA
fi
bool 'Support for Mips Magnum 4000' CONFIG_MIPS_MAGNUM_4000
bool 'Support for Momentum Ocelot board' CONFIG_MOMENCO_OCELOT
bool 'Support for NEC DDB Vrc-5476' CONFIG_DDB5476
bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
bool 'Support for SGI IP22' CONFIG_SGI_IP22
bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI

#
# Select some configuration options automatically for certain systems.
#
unset CONFIG_ARC32
unset CONFIG_BOARD_SCACHE
unset CONFIG_HAVE_STD_PC_SERIAL_PORT
unset CONFIG_I8259
unset CONFIG_ISA
unset CONFIG_PCI
unset CONFIG_MIPS_JAZZ
unset CONFIG_SWAP_IO_SPACE
unset CONFIG_VIDEO_G364
unset CONFIG_PC_KEYB

define_bool CONFIG_MCA n
define_bool CONFIG_SBUS n

if [ "$CONFIG_MIPS_EV96100" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_MIPS_GT96100 y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MIPS_EV64120" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_ISA n
   define_bool CONFIG_MIPS_GT64120 y
fi

if [ "$CONFIG_ALGOR_P4032" = "y" ]; then
   define_bool CONFIG_PCI y
fi
if [ "$CONFIG_MIPS_MAGNUM_4000" = "y" -o \
     "$CONFIG_OLIVETTI_M700" = "y" ]; then
   define_bool CONFIG_ARC32 y
   define_bool CONFIG_BOARD_SCACHE y
   define_bool CONFIG_I8259 y
   define_bool CONFIG_ISA y
   define_bool CONFIG_FB y
   define_bool CONFIG_FB_G364 y	
   define_bool CONFIG_MIPS_JAZZ y
   define_bool CONFIG_ROTTEN_IRQ y
   define_bool CONFIG_PC_KEYB y
fi
if [ "$CONFIG_ACER_PICA_61" = "y" ]; then
   define_bool CONFIG_ARC32 y
   define_bool CONFIG_I8259 y
   define_bool CONFIG_ISA y
   define_bool CONFIG_MIPS_JAZZ y
   define_bool CONFIG_PC_KEYB y
   define_bool CONFIG_ROTTEN_IRQ y
fi
if [ "$CONFIG_MIPS_ATLAS" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MIPS_MALTA" = "y" ]; then
   define_bool CONFIG_I8259 y
   define_bool CONFIG_PCI y
   define_bool CONFIG_HAVE_STD_PC_SERIAL_PORT y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_MOMENCO_OCELOT" = "y" ]; then
   define_bool CONFIG_PCI y
   define_bool CONFIG_SYSCLK_100 y
   define_bool CONFIG_SWAP_IO_SPACE y
fi
if [ "$CONFIG_SGI_IP22" = "y" ]; then
   define_bool CONFIG_ARC32 y
   define_bool CONFIG_BOARD_SCACHE y
   define_bool CONFIG_PC_KEYB y
   define_bool CONFIG_SGI y
fi
if [ "$CONFIG_SNI_RM200_PCI" = "y" ]; then
   define_bool CONFIG_ARC32 y
   define_bool CONFIG_I8259 y
   define_bool CONFIG_ISA y
   define_bool CONFIG_PC_KEYB y
   define_bool CONFIG_PCI y
   define_bool CONFIG_ROTTEN_IRQ y
fi
if [ "$CONFIG_DDB5074" = "y" -o "$CONFIG_DDB5476"  = "y" ]; then
   define_bool CONFIG_I8259 y
   define_bool CONFIG_ISA y
   define_bool CONFIG_PCI y
   define_bool CONFIG_PC_KEYB y
   define_bool CONFIG_ROTTEN_IRQ y
fi

if [ "$CONFIG_ISA" != "y" ]; then
   define_bool CONFIG_ISA n
   define_bool CONFIG_EISA n
else
   define_bool CONFIG_EISA y
fi

if [ "$CONFIG_PCI" != "y" ]; then
   define_bool CONFIG_PCI n
fi

if [ "$CONFIG_I8259" != "y" ]; then
   define_bool CONFIG_I8259 n
fi
endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
   bool '  Set version information on all module symbols' CONFIG_MODVERSIONS
   bool '  Kernel module loader' CONFIG_KMOD
fi
endmenu

mainmenu_option next_comment
comment 'CPU selection'

choice 'CPU type' \
	"R3000 CONFIG_CPU_R3000	\
	 R6000 CONFIG_CPU_R6000	\
	 R4300 CONFIG_CPU_R4300	\
	 R4x00 CONFIG_CPU_R4X00	\
	 R5000 CONFIG_CPU_R5000	\
         R5432 CONFIG_CPU_R5432 \
	 RM7000 CONFIG_CPU_RM7000 \
	 R52xx CONFIG_CPU_NEVADA \
	 R8000 CONFIG_CPU_R8000	\
	 R10000 CONFIG_CPU_R10000 \
	 MIPS32 CONFIG_CPU_MIPS32" R4x00

bool 'Override CPU Options' CONFIG_CPU_ADVANCED

if [ "$CONFIG_CPU_ADVANCED" = "y" ]; then
   bool '  ll/sc Instructions available' CONFIG_CPU_HAS_LLSC
   bool '  Writeback Buffer available' CONFIG_CPU_HAS_WB
else
   if [ "$CONFIG_CPU_R3000" = "y" ]; then
      if [ "$CONFIG_DECSTATION" = "y" ]; then
	 define_bool CONFIG_CPU_HAS_LLSC n
	 define_bool CONFIG_CPU_HAS_WB y
      else
	 define_bool CONFIG_CPU_HAS_LLSC n
	 define_bool CONFIG_CPU_HAS_WB n
      fi
   else
      define_bool CONFIG_CPU_HAS_LLSC y
      define_bool CONFIG_CPU_HAS_WB n
   fi
fi
endmenu

mainmenu_option next_comment
comment 'General setup'
if [ "$CONFIG_DECSTATION" = "y" -o "$CONFIG_DDB5074" = "y" -o "$CONFIG_DDB5476" = "y" ]; then
   define_bool CONFIG_CPU_LITTLE_ENDIAN y
else
   bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
fi
bool 'Kernel floating-point emulation' CONFIG_MIPS_FPU_EMULATOR

if [ "$CONFIG_PROC_FS" = "y" ]; then
   define_bool CONFIG_KCORE_ELF y
fi
define_bool CONFIG_ELF_KERNEL y

if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
   bool 'Include IRIX binary compatibility' CONFIG_BINFMT_IRIX 
   bool 'Include forward keyboard' CONFIG_FORWARD_KEYBOARD 
fi

if [ "$CONFIG_ARC32" = "y" ]; then
   bool 'ARC console support' CONFIG_ARC_CONSOLE
fi

define_bool CONFIG_BINFMT_AOUT n
define_bool CONFIG_BINFMT_ELF y
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

bool 'Networking support' CONFIG_NET

if [ "$CONFIG_PCI" = "y" ]; then
    source drivers/pci/Config.in
fi

bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT
bool 'Sysctl support' CONFIG_SYSCTL

source drivers/parport/Config.in

if [ "$CONFIG_DECSTATION" = "y" ]; then
    bool 'TURBOchannel support' CONFIG_TC
#    if [ "$CONFIG_TC" = "y" ]; then
#	bool ' Access.Bus support' CONFIG_ACCESSBUS
#    fi
fi
endmenu

if [ "$CONFIG_ISA" = "y" ]; then
   source drivers/pnp/Config.in
fi

if [ "$CONFIG_HOTPLUG" = "y" ] ; then
   source drivers/pcmcia/Config.in
else
   define_bool CONFIG_PCMCIA n
fi

source drivers/mtd/Config.in

source drivers/block/Config.in

source drivers/md/Config.in

if [ "$CONFIG_NET" = "y" ]; then
   source net/Config.in
fi

if [ "$CONFIG_DECSTATION" != "y" -a \
     "$CONFIG_SGI_IP22" != "y" ]; then
   source drivers/telephony/Config.in
fi

if [ "$CONFIG_SGI_IP22" != "y" -a \
     "$CONFIG_DECSTATION" != "y" ]; then

   mainmenu_option next_comment
   comment 'ATA/IDE/MFM/RLL support'
    
   tristate 'ATA/IDE/MFM/RLL support' CONFIG_IDE
    
   if [ "$CONFIG_IDE" != "n" ]; then
      source drivers/ide/Config.in
   else
      define_bool CONFIG_BLK_DEV_IDE_MODES n
      define_bool CONFIG_BLK_DEV_HD n
   fi
   endmenu
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
   source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_DECSTATION" != "y" -a \
     "$CONFIG_SGI_IP22" != "y" ]; then
   source drivers/i2o/Config.in
fi

if [ "$CONFIG_NET" = "y" ]; then
   mainmenu_option next_comment
   comment 'Network device support'

   bool 'Network device support' CONFIG_NETDEVICES
   if [ "$CONFIG_NETDEVICES" = "y" ]; then

      if [ "$CONFIG_SGI_IP22" != "y" -a \
      	   "$CONFIG_DECSTATION" != "y" -a \
	   "$CONFIG_BAGET_MIPS" != "y" ]; then

	 source drivers/net/Config.in

	 if [ "$CONFIG_ATM" = "y" ]; then
	    source drivers/atm/Config.in
	 fi
      else
	 tristate 'Dummy net driver support' CONFIG_DUMMY
	 tristate 'SLIP (serial line) support' CONFIG_SLIP
	 if [ "$CONFIG_SLIP" != "n" ]; then
	    bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
	    bool ' Keepalive and linefill' CONFIG_SLIP_SMART
	 fi
	 tristate 'PPP (point-to-point) support' CONFIG_PPP
	 if [ ! "$CONFIG_PPP" = "n" ]; then
	    comment 'CCP compressors for PPP are only built as modules.'
	 fi
         if [ "$CONFIG_SGI_IP22" = "y" ]; then
	    bool 'SGI Seeq ethernet controller support' CONFIG_SGISEEQ
	 fi
	 if [ "$CONFIG_DECSTATION" = "y" ]; then
	    bool 'DEC LANCE ethernet controller support' CONFIG_DECLANCE
	 fi
	 if [ "$CONFIG_BAGET_MIPS" = "y" ]; then
	    tristate 'Baget AMD LANCE support' CONFIG_BAGETLANCE
	 fi
      fi
   fi
   endmenu
fi

if [ "$CONFIG_ISA" = "y" -o "$CONFIG_PCI" = "y" ]; then
   mainmenu_option next_comment
   comment 'ISDN subsystem'

   if [ "$CONFIG_NET" != "n" ]; then
      tristate 'ISDN support' CONFIG_ISDN
      if [ "$CONFIG_ISDN" != "n" ]; then
	 source drivers/isdn/Config.in
      fi
   fi
   endmenu

   mainmenu_option next_comment
   comment 'Old CD-ROM drivers (not SCSI, not IDE)'

   bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
   if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
      source drivers/cdrom/Config.in
   fi
   endmenu
fi

if [ "$CONFIG_DECSTATION" != "y" -a \
     "$CONFIG_SGI_IP22" != "y" ]; then
   source drivers/char/Config.in

   source drivers/media/Config.in
fi

if [ "$CONFIG_DECSTATION" = "y" ]; then
   mainmenu_option next_comment
   comment 'DECStation Character devices'

   bool 'Virtual terminal' CONFIG_VT
   if [ "$CONFIG_VT" = "y" ]; then
      bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
   fi
   tristate 'Standard/generic (dumb) serial support' CONFIG_SERIAL
   if [ "$CONFIG_SERIAL" = "y" ]; then
      bool 'DZ11 Serial Support' CONFIG_DZ
      if [ "$CONFIG_TC" = "y" ]; then
	 bool 'Z85C30 Serial Support' CONFIG_ZS
      fi
   bool '   Support for console on serial port' CONFIG_SERIAL_CONSOLE
   fi
   bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
   if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
      int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
   fi
#   if [ "$CONFIG_ACCESSBUS" = "y" ]; then
#      bool 'MAXINE Access.Bus mouse (VSXXX-BB/GB) support' CONFIG_DTOP_MOUSE
#   fi
   bool 'Enhanced Real Time Clock Support' CONFIG_RTC
   endmenu
fi

if [ "$CONFIG_SGI_IP22" = "y" ]; then
   mainmenu_option next_comment
   comment 'SGI Character devices'
   bool 'Virtual terminal' CONFIG_VT
   if [ "$CONFIG_VT" = "y" ]; then
      bool 'Support for console on virtual terminal' CONFIG_VT_CONSOLE
      tristate 'SGI Newport Console support' CONFIG_SGI_NEWPORT_CONSOLE
      if [ "$CONFIG_SGI_NEWPORT_CONSOLE" != "y" ]; then
	 define_bool CONFIG_DUMMY_CONSOLE y
      else
	 define_bool CONFIG_FONT_8x16 y
      fi
   fi
   bool 'PS/2 mouse support' CONFIG_PSMOUSE
   if [ "$CONFIG_PSMOUSE" != "n" ]; then
      define_bool CONFIG_MOUSE y
   fi
   bool 'Unix98 PTY support' CONFIG_UNIX98_PTYS
   if [ "$CONFIG_UNIX98_PTYS" = "y" ]; then
      int 'Maximum number of Unix98 PTYs in use (0-2048)' CONFIG_UNIX98_PTY_COUNT 256
   fi
   endmenu
fi

source fs/Config.in

if [ "$CONFIG_VT" = "y" ]; then
   mainmenu_option next_comment

   comment 'Console drivers'
      if [ "$CONFIG_DECSTATION" != "y" ]; then
	 bool 'VGA text console' CONFIG_VGA_CONSOLE
      fi
      bool 'Support for frame buffer devices' CONFIG_FB
      source drivers/video/Config.in
   endmenu
fi

if [ "$CONFIG_DECSTATION" != "y" ]; then
   mainmenu_option next_comment
   comment 'Sound'

   tristate 'Sound card support' CONFIG_SOUND
   if [ "$CONFIG_SOUND" != "n" ]; then
      source drivers/sound/Config.in
   fi
   endmenu
fi

if [ "$CONFIG_SGI_IP22" = "y" ]; then
   source drivers/sgi/Config.in
fi

source drivers/usb/Config.in
source drivers/input/Config.in

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Are you using a crosscompiler' CONFIG_CROSSCOMPILE
if [ "$CONFIG_MODULES" = "y" ]; then
   bool ' Build fp execption handler module' CONFIG_MIPS_FPE_MODULE
fi
if [ "$CONFIG_SERIAL" = "y" ]; then
  bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
fi
bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
if [ "$CONFIG_SMP" != "y" ]; then
   bool 'Run uncached' CONFIG_MIPS_UNCACHED
fi
endmenu