#
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux Kernel Configuration"

mainmenu_option next_comment
comment 'Code maturity level options'
bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
endmenu

mainmenu_option next_comment
comment 'Machine selection'
bool 'Support for Acer PICA 1 chipset' CONFIG_ACER_PICA_61
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  bool 'Support for Algorithmics P4032' CONFIG_ALGOR_P4032
  bool 'Support for DECstation' CONFIG_DECSTATION
  bool 'Support for Deskstation RPC44' CONFIG_DESKSTATION_RPC44
  bool 'Support for Deskstation Tyne' CONFIG_DESKSTATION_TYNE
  bool 'Support for Mips Magnum 3000' CONFIG_MIPS_MAGNUM_3000
fi
bool 'Support for Mips Magnum 4000' CONFIG_MIPS_MAGNUM_4000
bool 'Support for Olivetti M700-10' CONFIG_OLIVETTI_M700
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  bool 'Support for SGI workstations' CONFIG_SGI
fi
bool 'Support for SNI RM200 PCI' CONFIG_SNI_RM200_PCI
if [ "$CONFIG_DESKSTATION_RPC44" = "y" -o \
     "$CONFIG_DESKSTATION_TYNE" = "y" ]; then
	define_bool CONFIG_MIPS_ARC y
fi
if [ "$CONFIG_ACER_PICA_61" = "y" -o \
     "$CONFIG_OLIVETTI_M700" = "y" -o \
     "$CONFIG_MIPS_MAGNUM_4000" = "y" ]; then
	define_bool CONFIG_MIPS_JAZZ y
fi
unset CONFIG_PCI
if [ "$CONFIG_SNI_RM200_PCI" = "y" -o \
     "$CONFIG_ALGOR_P4032" = "y" ]; then
	define_bool CONFIG_PCI y
fi
endmenu

mainmenu_option next_comment
comment 'CPU selection'

choice 'CPU type' \
	"R3000 CONFIG_CPU_R3000	\
	 R6000 CONFIG_CPU_R6000	\
	 R4300 CONFIG_CPU_R4300	\
	 R4x00 CONFIG_CPU_R4X00	\
	 R5000 CONFIG_CPU_R5000	\
	 R8000 CONFIG_CPU_R8000	\
	 R10000 CONFIG_CPU_R10000" R4x00
endmenu

mainmenu_option next_comment
comment 'General setup'
if [ "$CONFIG_DECSTATION" = "y" ]; then
  bool 'Compile the kernel into the ECOFF object format' CONFIG_ECOFF_KERNEL
  define_bool CONFIG_CPU_LITTLE_ENDIAN y
else
  define_bool CONFIG_ELF_KERNEL y
  bool 'Generate little endian code' CONFIG_CPU_LITTLE_ENDIAN
fi
if [ "$CONFIG_CPU_LITTLE_ENDIAN" = "n" ]; then
  define_bool CONFIG_BINFMT_IRIX y
fi
define_bool CONFIG_BINFMT_ELF y
define_bool CONFIG_BINFMT_AOUT n
if [ "$CONFIG_EXPERIMENTAL" = "y" ]; then
  tristate 'Kernel support for JAVA binaries' CONFIG_BINFMT_JAVA
fi
bool 'Networking support' CONFIG_NET
bool 'System V IPC' CONFIG_SYSVIPC
bool 'Sysctl support' CONFIG_SYSCTL

if [ "$CONFIG_SGI" != "y" ]; then
  tristate 'Parallel port support' CONFIG_PNP_PARPORT
fi

endmenu

mainmenu_option next_comment
comment 'Loadable module support'
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel daemon support (e.g. autoload of modules)' CONFIG_KERNELD
fi

#
# All SGI block devices are SCSI based AFAIK. -davem
#
if [ "$CONFIG_SGI" != "y" ]; then
  source drivers/block/Config.in
fi

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'

tristate 'SCSI support' CONFIG_SCSI

if [ "$CONFIG_SCSI" != "n" ]; then
	if [ "$CONFIG_SGI" = "y" ]; then
		comment 'SCSI support type (disk, tape, CDrom)'

		dep_tristate 'SCSI disk support' CONFIG_BLK_DEV_SD $CONFIG_SCSI
		dep_tristate 'SCSI tape support' CONFIG_CHR_DEV_ST $CONFIG_SCSI
		dep_tristate 'SCSI CDROM support' CONFIG_BLK_DEV_SR $CONFIG_SCSI
		dep_tristate 'SCSI generic support' CONFIG_CHR_DEV_SG $CONFIG_SCSI

		comment 'Some SCSI devices (e.g. CD jukebox) support multiple LUNs'

		bool 'Probe all LUNs on each SCSI device' CONFIG_SCSI_MULTI_LUN

		bool 'Verbose SCSI error reporting' CONFIG_SCSI_CONSTANTS

		#mainmenu_option next_comment
		comment 'SCSI low-level drivers'

		dep_tristate 'SGI wd93 Scsi Driver' CONFIG_SCSI_SGIWD93 $CONFIG_SCSI
	else
		source drivers/scsi/Config.in
	fi
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    if [ "$CONFIG_SGI" != "y" ]; then
	source drivers/net/Config.in
    else
	tristate 'Dummy net driver support' CONFIG_DUMMY
	tristate 'SLIP (serial line) support' CONFIG_SLIP
	if [ "$CONFIG_SLIP" != "n" ]; then
	  bool ' CSLIP compressed headers' CONFIG_SLIP_COMPRESSED
	  bool ' Keepalive and linefill' CONFIG_SLIP_SMART
	fi
	tristate 'PPP (point-to-point) support' CONFIG_PPP
	if [ ! "$CONFIG_PPP" = "n" ]; then
	  comment 'CCP compressors for PPP are only built as modules.'
	fi
	bool 'SGI Seeq ethernet controller support' CONFIG_SGISEEQ
    fi
  fi
  endmenu
fi

if [ "$CONFIG_SGI" != "y" ]; then
	mainmenu_option next_comment
	comment 'ISDN subsystem'

	tristate 'ISDN support' CONFIG_ISDN
	if [ "$CONFIG_ISDN" != "n" ]; then
	  source drivers/isdn/Config.in
	fi
	endmenu

	mainmenu_option next_comment
	comment 'CD-ROM drivers (not for SCSI or IDE/ATAPI drives)'

	bool 'Support non-SCSI/IDE/ATAPI drives' CONFIG_CD_NO_IDESCSI
	if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
	  source drivers/cdrom/Config.in
	fi
	endmenu
fi

source fs/Config.in

if [ "$CONFIG_SGI" != "y" ]; then
  source drivers/char/Config.in

  mainmenu_option next_comment
  comment 'Sound'

  tristate 'Sound card support' CONFIG_SOUND
  if [ "$CONFIG_SOUND" != "n" ]; then
    source drivers/sound/Config.in
  fi
  endmenu
else
  comment 'SGI Character Devices'
  bool 'Virtual terminal' CONFIG_VT
  if [ "$CONFIG_VT" = "y" ]; then
    bool 'Console on virtual terminal' CONFIG_VT_CONSOLE
  fi
  tristate 'PS/2 mouse (aka "auxiliary device") support' CONFIG_PSMOUSE
  bool 'SGI Zilog85C30 serial support' CONFIG_SGI_SERIAL
  if [ "$CONFIG_SGI_SERIAL" != "n" ]; then
    define_bool CONFIG_SERIAL y
  fi
fi

mainmenu_option next_comment
comment 'Kernel hacking'

#bool 'Debug kmalloc/kfree' CONFIG_DEBUG_MALLOC
bool 'Remote GDB kernel debugging' CONFIG_REMOTE_DEBUG
bool 'Kernel profiling support' CONFIG_PROFILE
if [ "$CONFIG_PROFILE" = "y" ]; then
  int ' Profile shift count' CONFIG_PROFILE_SHIFT 2
fi
endmenu