/* * Copyright (C) 1991, 1992, 1995 Linus Torvalds * Copyright (C) 1996 - 2000 Ralf Baechle * * This file contains the time handling details for PC-style clocks as * found in some MIPS systems. */ /************************************************************************** * 9 Nov, 2000. * Changed init_cycle_counter() routine, use the mips_cpu structure. * * Kevin D. Kissell, kevink@mips.com and Carsten Langgaard, carstenl@mips * Copyright (C) 2000 MIPS Technologies, Inc. All rights reserved. *************************************************************************/ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include extern volatile unsigned long wall_jiffies; unsigned long r4k_interval; extern rwlock_t xtime_lock; /* * Change this if you have some constant time drift */ /* This is the value for the PC-style PICs. */ /* #define USECS_PER_JIFFY (1000020/HZ) */ /* This is for machines which generate the exact clock. */ #define USECS_PER_JIFFY (1000000/HZ) /* Cycle counter value at the previous timer interrupt.. */ static unsigned int timerhi, timerlo; /* * On MIPS only R4000 and better have a cycle counter. * * FIXME: Does playing with the RP bit in c0_status interfere with this code? */ static unsigned long do_fast_gettimeoffset(void) { u32 count; unsigned long res, tmp; /* Last jiffy when do_fast_gettimeoffset() was called. */ static unsigned long last_jiffies; unsigned long quotient; /* * Cached "1/(clocks per usec)*2^32" value. * It has to be recalculated once each jiffy. */ static unsigned long cached_quotient; tmp = jiffies; quotient = cached_quotient; if (tmp && last_jiffies != tmp) { last_jiffies = tmp; __asm__(".set\tnoreorder\n\t" ".set\tnoat\n\t" ".set\tmips3\n\t" "lwu\t%0,%2\n\t" "dsll32\t$1,%1,0\n\t" "or\t$1,$1,%0\n\t" "ddivu\t$0,$1,%3\n\t" "mflo\t$1\n\t" "dsll32\t%0,%4,0\n\t" "nop\n\t" "ddivu\t$0,%0,$1\n\t" "mflo\t%0\n\t" ".set\tmips0\n\t" ".set\tat\n\t" ".set\treorder" :"=&r" (quotient) :"r" (timerhi), "m" (timerlo), "r" (tmp), "r" (USECS_PER_JIFFY) :"$1"); cached_quotient = quotient; } /* Get last timer tick in absolute kernel time */ count = read_32bit_cp0_register(CP0_COUNT); /* .. relative to previous jiffy (32 bits is enough) */ count -= timerlo; __asm__("multu\t%1,%2\n\t" "mfhi\t%0" :"=r" (res) :"r" (count), "r" (quotient)); /* * Due to possible jiffies inconsistencies, we need to check * the result so that we'll get a timer that is monotonic. */ if (res >= USECS_PER_JIFFY) res = USECS_PER_JIFFY-1; return res; } /* This function must be called with interrupts disabled * It was inspired by Steve McCanne's microtime-i386 for BSD. -- jrs * * However, the pc-audio speaker driver changes the divisor so that * it gets interrupted rather more often - it loads 64 into the * counter rather than 11932! This has an adverse impact on * do_gettimeoffset() -- it stops working! What is also not * good is that the interval that our timer function gets called * is no longer 10.0002 ms, but 9.9767 ms. To get around this * would require using a different timing source. Maybe someone * could use the RTC - I know that this can interrupt at frequencies * ranging from 8192Hz to 2Hz. If I had the energy, I'd somehow fix * it so that at startup, the timer code in sched.c would select * using either the RTC or the 8253 timer. The decision would be * based on whether there was any other device around that needed * to trample on the 8253. I'd set up the RTC to interrupt at 1024 Hz, * and then do some jiggery to have a version of do_timer that * advanced the clock by 1/1024 s. Every time that reached over 1/100 * of a second, then do all the old code. If the time was kept correct * then do_gettimeoffset could just return 0 - there is no low order * divider that can be accessed. * * Ideally, you would be able to use the RTC for the speaker driver, * but it appears that the speaker driver really needs interrupt more * often than every 120 us or so. * * Anyway, this needs more thought.... pjsg (1993-08-28) * * If you are really that interested, you should be reading * comp.protocols.time.ntp! */ #define TICK_SIZE tick static unsigned long do_slow_gettimeoffset(void) { int count; static int count_p = LATCH; /* for the first call after boot */ static unsigned long jiffies_p; /* * cache volatile jiffies temporarily; we have IRQs turned off. */ unsigned long jiffies_t; /* timer count may underflow right here */ outb_p(0x00, 0x43); /* latch the count ASAP */ count = inb_p(0x40); /* read the latched count */ /* * We do this guaranteed double memory access instead of a _p * postfix in the previous port access. Wheee, hackady hack */ jiffies_t = jiffies; count |= inb_p(0x40) << 8; /* * avoiding timer inconsistencies (they are rare, but they happen)... * there are two kinds of problems that must be avoided here: * 1. the timer counter underflows * 2. hardware problem with the timer, not giving us continuous time, * the counter does small "jumps" upwards on some Pentium systems, * (see c't 95/10 page 335 for Neptun bug.) */ if( jiffies_t == jiffies_p ) { if( count > count_p ) { /* the nutcase */ outb_p(0x0A, 0x20); /* assumption about timer being IRQ1 */ if (inb(0x20) & 0x01) { /* * We cannot detect lost timer interrupts ... * well, that's why we call them lost, don't we? :) * [hmm, on the Pentium and Alpha we can ... sort of] */ count -= LATCH; } else { printk("do_slow_gettimeoffset(): hardware timer problem?\n"); } } } else jiffies_p = jiffies_t; count_p = count; count = ((LATCH-1) - count) * TICK_SIZE; count = (count + LATCH/2) / LATCH; return count; } static unsigned long (*do_gettimeoffset)(void) = do_slow_gettimeoffset; /* * This version of gettimeofday has near microsecond resolution. */ void do_gettimeofday(struct timeval *tv) { unsigned long flags; read_lock_irqsave (&xtime_lock, flags); *tv = xtime; tv->tv_usec += do_gettimeoffset(); /* * xtime is atomically updated in timer_bh. jiffies - wall_jiffies * is nonzero if the timer bottom half hasnt executed yet. */ if (jiffies - wall_jiffies) tv->tv_usec += USECS_PER_JIFFY; read_unlock_irqrestore (&xtime_lock, flags); if (tv->tv_usec >= 1000000) { tv->tv_usec -= 1000000; tv->tv_sec++; } } void do_settimeofday(struct timeval *tv) { write_lock_irq (&xtime_lock); /* This is revolting. We need to set the xtime.tv_usec * correctly. However, the value in this location is * is value at the last tick. * Discover what correction gettimeofday * would have done, and then undo it! */ tv->tv_usec -= do_gettimeoffset(); if (tv->tv_usec < 0) { tv->tv_usec += 1000000; tv->tv_sec--; } xtime = *tv; time_adjust = 0; /* stop active adjtime() */ time_status |= STA_UNSYNC; time_maxerror = NTP_PHASE_LIMIT; time_esterror = NTP_PHASE_LIMIT; write_unlock_irq (&xtime_lock); } /* * In order to set the CMOS clock precisely, set_rtc_mmss has to be * called 500 ms after the second nowtime has started, because when * nowtime is written into the registers of the CMOS clock, it will * jump to the next second precisely 500 ms later. Check the Motorola * MC146818A or Dallas DS12887 data sheet for details. * * BUG: This routine does not handle hour overflow properly; it just * sets the minutes. Usually you won't notice until after reboot! */ static int set_rtc_mmss(unsigned long nowtime) { int retval = 0; int real_seconds, real_minutes, cmos_minutes; unsigned char save_control, save_freq_select; save_control = CMOS_READ(RTC_CONTROL); /* tell the clock it's being set */ CMOS_WRITE((save_control|RTC_SET), RTC_CONTROL); save_freq_select = CMOS_READ(RTC_FREQ_SELECT); /* stop and reset prescaler */ CMOS_WRITE((save_freq_select|RTC_DIV_RESET2), RTC_FREQ_SELECT); cmos_minutes = CMOS_READ(RTC_MINUTES); if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) BCD_TO_BIN(cmos_minutes); /* * since we're only adjusting minutes and seconds, * don't interfere with hour overflow. This avoids * messing with unknown time zones but requires your * RTC not to be off by more than 15 minutes */ real_seconds = nowtime % 60; real_minutes = nowtime / 60; if (((abs(real_minutes - cmos_minutes) + 15)/30) & 1) real_minutes += 30; /* correct for half hour time zone */ real_minutes %= 60; if (abs(real_minutes - cmos_minutes) < 30) { if (!(save_control & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BIN_TO_BCD(real_seconds); BIN_TO_BCD(real_minutes); } CMOS_WRITE(real_seconds,RTC_SECONDS); CMOS_WRITE(real_minutes,RTC_MINUTES); } else { printk(KERN_WARNING "set_rtc_mmss: can't update from %d to %d\n", cmos_minutes, real_minutes); retval = -1; } /* The following flags have to be released exactly in this order, * otherwise the DS12887 (popular MC146818A clone with integrated * battery and quartz) will not reset the oscillator and will not * update precisely 500 ms later. You won't find this mentioned in * the Dallas Semiconductor data sheets, but who believes data * sheets anyway ... -- Markus Kuhn */ CMOS_WRITE(save_control, RTC_CONTROL); CMOS_WRITE(save_freq_select, RTC_FREQ_SELECT); return retval; } /* last time the cmos clock got updated */ static long last_rtc_update; /* * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ static void inline timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) { #ifdef CONFIG_DDB5074 static unsigned cnt, period, dist; if (cnt == 0 || cnt == dist) ddb5074_led_d2(1); else if (cnt == 7 || cnt == dist+7) ddb5074_led_d2(0); if (++cnt > period) { cnt = 0; /* The hyperbolic function below modifies the heartbeat period * length in dependency of the current (5min) load. It goes * through the points f(0)=126, f(1)=86, f(5)=51, * f(inf)->30. */ period = ((672<pid) { extern int _stext; unsigned long pc = regs->cp0_epc; pc -= (unsigned long) &_stext; pc >>= prof_shift; /* * Dont ignore out-of-bounds pc values silently, * put them into the last histogram slot, so if * present, they will show up as a sharp peak. */ if (pc > prof_len-1) pc = prof_len-1; atomic_inc((atomic_t *)&prof_buffer[pc]); } } do_timer(regs); /* * If we have an externally synchronized Linux clock, then update * CMOS clock accordingly every ~11 minutes. Set_rtc_mmss() has to be * called as close as possible to 500 ms before the new second starts. */ read_lock (&xtime_lock); if ((time_status & STA_UNSYNC) == 0 && xtime.tv_sec > last_rtc_update + 660 && xtime.tv_usec >= 500000 - ((unsigned) tick) / 2 && xtime.tv_usec <= 500000 + ((unsigned) tick) / 2) { if (set_rtc_mmss(xtime.tv_sec) == 0) last_rtc_update = xtime.tv_sec; else last_rtc_update = xtime.tv_sec - 600; /* do it again in 60 s */ } /* As we return to user mode fire off the other CPU schedulers.. this is basically because we don't yet share IRQ's around. This message is rigged to be safe on the 386 - basically it's a hack, so don't look closely for now.. */ /*smp_message_pass(MSG_ALL_BUT_SELF, MSG_RESCHEDULE, 0L, 0); */ read_unlock (&xtime_lock); } static inline void r4k_timer_interrupt(int irq, void *dev_id, struct pt_regs * regs) { unsigned int count; /* * The cycle counter is only 32 bit which is good for about * a minute at current count rates of upto 150MHz or so. */ count = read_32bit_cp0_register(CP0_COUNT); timerhi += (count < timerlo); /* Wrap around */ timerlo = count; #ifdef CONFIG_SGI_IP22 /* Since we don't get anything but r4k timer interrupts, we need to * set this up so that we'll get one next time. Fortunately since we * have timerhi/timerlo, we don't care so much if we miss one. So * we need only ask for the next in r4k_interval counts. On other * archs we have a real timer, so we don't want this. */ write_32bit_cp0_register (CP0_COMPARE, (unsigned long) (count + r4k_interval)); kstat.irqs[0][irq]++; #endif timer_interrupt(irq, dev_id, regs); if (!jiffies) { /* * If jiffies has overflowed in this timer_interrupt we must * update the timer[hi]/[lo] to make do_fast_gettimeoffset() * quotient calc still valid. -arca */ timerhi = timerlo = 0; } } void indy_r4k_timer_interrupt (struct pt_regs *regs) { static const int INDY_R4K_TIMER_IRQ = 7; r4k_timer_interrupt (INDY_R4K_TIMER_IRQ, NULL, regs); } struct irqaction irq0 = { timer_interrupt, SA_INTERRUPT, 0, "timer", NULL, NULL}; void (*board_time_init)(struct irqaction *irq); void __init time_init(void) { unsigned int epoch = 0, year, mon, day, hour, min, sec; int i; /* The Linux interpretation of the CMOS clock register contents: * When the Update-In-Progress (UIP) flag goes from 1 to 0, the * RTC registers show the second which has precisely just started. * Let's hope other operating systems interpret the RTC the same way. */ /* read RTC exactly on falling edge of update flag */ for (i = 0 ; i < 1000000 ; i++) /* may take up to 1 second... */ if (CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP) break; for (i = 0 ; i < 1000000 ; i++) /* must try at least 2.228 ms */ if (!(CMOS_READ(RTC_FREQ_SELECT) & RTC_UIP)) break; do { /* Isn't this overkill ? UIP above should guarantee consistency */ sec = CMOS_READ(RTC_SECONDS); min = CMOS_READ(RTC_MINUTES); hour = CMOS_READ(RTC_HOURS); day = CMOS_READ(RTC_DAY_OF_MONTH); mon = CMOS_READ(RTC_MONTH); year = CMOS_READ(RTC_YEAR); } while (sec != CMOS_READ(RTC_SECONDS)); if (!(CMOS_READ(RTC_CONTROL) & RTC_DM_BINARY) || RTC_ALWAYS_BCD) { BCD_TO_BIN(sec); BCD_TO_BIN(min); BCD_TO_BIN(hour); BCD_TO_BIN(day); BCD_TO_BIN(mon); BCD_TO_BIN(year); } /* Attempt to guess the epoch. This is the same heuristic as in rtc.c so no stupid things will happen to timekeeping. Who knows, maybe Ultrix also uses 1952 as epoch ... */ if (year > 10 && year < 44) { epoch = 1980; } else if (year < 96) { epoch = 1952; } year += epoch; write_lock_irq (&xtime_lock); xtime.tv_sec = mktime(year, mon, day, hour, min, sec); xtime.tv_usec = 0; write_unlock_irq (&xtime_lock); if (mips_cpu.options & MIPS_CPU_COUNTER) { write_32bit_cp0_register(CP0_COUNT, 0); do_gettimeoffset = do_fast_gettimeoffset; irq0.handler = r4k_timer_interrupt; } board_time_init(&irq0); }