/*
 * r4k_misc.S: Misc. exception handling code for r4k.
 *
 * Copyright (C) 1994, 1995, 1996 by Ralf Baechle and Andreas Busse
 *
 * Multi-cpu abstraction and reworking:
 * Copyright (C) 1996 David S. Miller (dm@engr.sgi.com)
 *
 * $Id: r4k_misc.S,v 1.3 1997/09/07 04:51:07 ralf Exp $
 */
#include <asm/asm.h>
#include <asm/current.h>
#include <asm/offset.h>
#include <asm/bootinfo.h>
#include <asm/cachectl.h>
#include <asm/current.h>
#include <asm/fpregdef.h>
#include <asm/mipsconfig.h>
#include <asm/mipsregs.h>
#include <asm/page.h>
#include <asm/pgtable.h>
#include <asm/processor.h>
#include <asm/regdef.h>
#include <asm/stackframe.h>

#undef NOTLB_OPTIMIZE /* If you are paranoid, define this. */

	/* ABUSE of CPP macros 101. */

	/* After this macro runs, the pte faulted on is
	 * in register PTE, a ptr into the table in which
	 * the pte belongs is in PTR.
	 */
#define LOAD_PTE(pte, ptr) \
	mfc0	pte, CP0_BADVADDR; \
	srl	pte, pte, 22; \
	_GET_CURRENT(ptr); \
	sll	pte, pte, 2; \
	lw	ptr, THREAD_PGDIR(ptr); \
	addu	ptr, pte, ptr; \
	mfc0	pte, CP0_BADVADDR; \
	lw	ptr, (ptr); \
	srl	pte, pte, 10; \
	and	pte, pte, 0xffc; \
	addu	ptr, ptr, pte; \
	lw	pte, (ptr);

	/* This places the even/odd pte pair in the page
	 * table at PTR into ENTRYLO0 and ENTRYLO1 using
	 * TMP as a scratch register.
	 */
#define PTE_RELOAD(ptr, tmp) \
	ori	ptr, ptr, 0x4; \
	xori	ptr, ptr, 0x4; \
	lw	tmp, 4(ptr); \
	lw	ptr, 0(ptr); \
	srl	tmp, tmp, 6; \
	mtc0	tmp, CP0_ENTRYLO1; \
	srl	ptr, ptr, 6; \
	mtc0	ptr, CP0_ENTRYLO0;

#define DO_FAULT(write) \
	.set	noat; \
	.set	macro; \
	SAVE_ALL; \
	mfc0	a2, CP0_BADVADDR; \
	STI; \
	.set	at; \
	move	a0, sp; \
	jal	do_page_fault; \
	 li	a1, write; \
	j	ret_from_sys_call; \
	 nop; \
	.set	noat; \
	.set	nomacro;

	/* Check is PTE is present, if not then jump to LABEL.
	 * PTR points to the page table where this PTE is located,
	 * when the macro is done executing PTE will be restored
	 * with it's original value.
	 */
#define PTE_PRESENT(pte, ptr, label) \
	andi	pte, pte, (_PAGE_PRESENT | _PAGE_READ); \
	xori	pte, pte, (_PAGE_PRESENT | _PAGE_READ); \
	bnez	pte, label; \
	 lw	pte, (ptr);

	/* Make PTE valid, store result in PTR. */
#define PTE_MAKEVALID(pte, ptr) \
	ori	pte, pte, (_PAGE_VALID | _PAGE_ACCESSED); \
	sw	pte, (ptr);

	/* Check if PTE can be written to, if not branch to LABEL.
	 * Regardless restore PTE with value from PTR when done.
	 */
#define PTE_WRITABLE(pte, ptr, label) \
	andi	pte, pte, (_PAGE_PRESENT | _PAGE_WRITE); \
	xori	pte, pte, (_PAGE_PRESENT | _PAGE_WRITE); \
	bnez	pte, label; \
	 lw	pte, (ptr);

	/* Make PTE writable, update software status bits as well,
	 * then store at PTR.
	 */
#define PTE_MAKEWRITE(pte, ptr) \
	ori	pte, pte, (_PAGE_ACCESSED | _PAGE_MODIFIED | \
			   _PAGE_VALID | _PAGE_DIRTY); \
	sw	pte, (ptr);

	.set	noreorder
	.set	mips3

/*
 * From the IDT errata for the QED RM5230 (Nevada), processor revision 1.0:
 * 2. A timing hazard exists for the TLBP instruction.
 *
 *      stalling_instruction
 *      TLBP
 *
 * The JTLB is being read for the TLBP throughout the stall generated by the
 * previous instruction. This is not really correct as the stalling instruction
 * can modify the address used to access the JTLB.  The failure symptom is that
 * the TLBP instruction will use an address created for the stalling instruction
 * and not the address held in C0_ENHI and thus report the wrong results.
 *
 * The software work-around is to not allow the instruction preceding the TLBP
 * to stall - make it an NOP or some other instruction guaranteed not to stall.
 *
 * Errata 2 will not be fixed.  This errata is also on the R5000.
 *
 * As if we MIPS hackers wouldn't know how to nop pipelines happy ...
 */
#define R5K_HAZARD nop

	/*
	 * Note for many R4k variants tlb probes cannot be executed out
	 * of the instruction cache else you get bogus results.
	 */
	.align	5
	NESTED(r4k_handle_tlbl, PT_SIZE, sp)
	.set	noat
	.set	nomacro
invalid_tlbl:
#ifndef NOTLB_OPTIMIZE
	/* Test present bit in entry. */
	LOAD_PTE(k0, k1)
	R5K_HAZARD
	tlbp
	PTE_PRESENT(k0, k1, nopage_tlbl)
	PTE_MAKEVALID(k0, k1)
	PTE_RELOAD(k1, k0)
	nop
	b	1f
	 tlbwi
1:
	nop
	eret
#endif

nopage_tlbl:
	DO_FAULT(0)
	END(r4k_handle_tlbl)

	.align	5
	NESTED(r4k_handle_tlbs, PT_SIZE, sp)
	.set	noat
#ifndef NOTLB_OPTIMIZE
	LOAD_PTE(k0, k1)
	R5K_HAZARD
	tlbp				# find faulting entry
	PTE_WRITABLE(k0, k1, nopage_tlbs)
	PTE_MAKEWRITE(k0, k1)
	PTE_RELOAD(k1, k0)
	nop
	b	1f
	 tlbwi
1:
	nop
	eret
#endif

nopage_tlbs:
	DO_FAULT(1)
	END(r4k_handle_tlbs)

	.align	5
	NESTED(r4k_handle_mod, PT_SIZE, sp)
	.set	noat
#ifndef NOTLB_OPTIMIZE
	LOAD_PTE(k0, k1)
	R5K_HAZARD
	tlbp					# find faulting entry
	andi	k0, k0, _PAGE_WRITE
	beqz	k0, nowrite_mod
	 lw	k0, (k1)

	/* Present and writable bits set, set accessed and dirty bits. */
	PTE_MAKEWRITE(k0, k1)
#if 0
	ori	k0, k0, (_PAGE_ACCESSED | _PAGE_DIRTY)
	sw	k0, (k1)
#endif

	/* Now reload the entry into the tlb. */
	PTE_RELOAD(k1, k0)
	nop
	b	1f
	 tlbwi
1:
	nop
	eret
#endif

nowrite_mod:
	DO_FAULT(1)
	END(r4k_handle_mod)