/* * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive * for more details. * * Copyright (C) 1995 Linus Torvalds * Copyright (C) 1995, 1996, 1997, 1998, 1999, 2000 Ralf Baechle * Copyright (C) 1996 Stoned Elipot */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_BLK_DEV_RAM #include #endif #include #ifdef CONFIG_RTC #include #endif #include #include #include #include #include #include #include #ifdef CONFIG_SGI_IP22 #include #endif struct mips_cpuinfo boot_cpu_data = { NULL, NULL, 0 }; /* * Not all of the MIPS CPUs have the "wait" instruction available. Moreover, * the implementation of the "wait" feature differs between CPU families. This * points to the function that implements CPU specific wait. * The wait instruction stops the pipeline and reduces the power consumption of * the CPU very much. */ void (*cpu_wait)(void) = NULL; /* * Do we have a cyclecounter available? */ char cyclecounter_available; /* * There are several bus types available for MIPS machines. "RISC PC" * type machines have ISA, EISA, VLB or PCI available, DECstations * have Turbochannel or Q-Bus, SGI has GIO, there are lots of VME * boxes ... * This flag is set if a EISA slots are available. */ int EISA_bus = 0; struct screen_info screen_info; #ifdef CONFIG_BLK_DEV_FD extern struct fd_ops no_fd_ops; struct fd_ops *fd_ops; #endif #if defined(CONFIG_BLK_DEV_IDE) || defined(CONFIG_BLK_DEV_IDE_MODULE) extern struct ide_ops no_ide_ops; struct ide_ops *ide_ops; #endif extern struct rtc_ops no_rtc_ops; struct rtc_ops *rtc_ops; #ifdef CONFIG_PC_KEYB extern struct kbd_ops no_kbd_ops; struct kbd_ops *kbd_ops; #endif /* * Setup information * * These are initialized so they are in the .data section */ unsigned long mips_memory_upper = KSEG0; /* this is set by kernel_entry() */ unsigned long mips_cputype = CPU_UNKNOWN; unsigned long mips_machtype = MACH_UNKNOWN; unsigned long mips_machgroup = MACH_GROUP_UNKNOWN; unsigned char aux_device_present; extern int _end; static char command_line[CL_SIZE] = { 0, }; char saved_command_line[CL_SIZE]; extern char arcs_cmdline[CL_SIZE]; /* * The board specific setup routine sets irq_setup to point to a board * specific setup routine. */ void (*irq_setup)(void); /* * mips_io_port_base is the begin of the address space to which x86 style * I/O ports are mapped. */ unsigned long mips_io_port_base; /* * isa_slot_offset is the address where E(ISA) busaddress 0 is is mapped * for the processor. */ unsigned long isa_slot_offset; extern void sgi_sysinit(void); extern void SetUpBootInfo(void); extern void loadmmu(void); extern asmlinkage void start_kernel(void); extern int prom_init(int, char **, char **, int *); /* * Probe whether cpu has config register by trying to play with * alternate cache bit and see whether it matters. * It's used by cpu_probe to distinguish between R3000A and R3081. */ static inline int cpu_has_confreg(void) { #ifdef CONFIG_CPU_R3000 extern unsigned long r3k_cache_size(unsigned long); unsigned long size1, size2; unsigned long cfg = read_32bit_cp0_register(CP0_CONF); size1 = r3k_cache_size(ST0_DE); write_32bit_cp0_register(CP0_CONF, cfg^CONF_AC); size2 = r3k_cache_size(ST0_DE); write_32bit_cp0_register(CP0_CONF, cfg); return size1 != size2; #else return 0; #endif } static inline void cpu_probe(void) { unsigned int prid = read_32bit_cp0_register(CP0_PRID); switch(prid & 0xff00) { case PRID_IMP_R2000: mips_cputype = CPU_R2000; break; case PRID_IMP_R3000: if((prid & 0xff) == PRID_REV_R3000A) if(cpu_has_confreg()) mips_cputype = CPU_R3081E; else mips_cputype = CPU_R3000A; else mips_cputype = CPU_R3000; break; case PRID_IMP_R4000: if((prid & 0xff) == PRID_REV_R4400) mips_cputype = CPU_R4400SC; else mips_cputype = CPU_R4000SC; break; case PRID_IMP_R4600: mips_cputype = CPU_R4600; break; case PRID_IMP_R4650: mips_cputype = CPU_R4650; break; case PRID_IMP_R4700: mips_cputype = CPU_R4700; break; case PRID_IMP_R5000: mips_cputype = CPU_R5000; break; case PRID_IMP_R5432: mips_cputype = CPU_R5432; break; case PRID_IMP_NEVADA: mips_cputype = CPU_NEVADA; break; case PRID_IMP_R6000: mips_cputype = CPU_R6000; break; case PRID_IMP_R6000A: mips_cputype = CPU_R6000A; break; case PRID_IMP_RM7000: mips_cputype = CPU_RM7000; break; case PRID_IMP_R8000: mips_cputype = CPU_R8000; break; case PRID_IMP_R10000: mips_cputype = CPU_R10000; break; default: mips_cputype = CPU_UNKNOWN; } } asmlinkage void __init init_arch(int argc, char **argv, char **envp, int *prom_vec) { unsigned int s; /* Determine which MIPS variant we are running on. */ cpu_probe(); prom_init(argc, argv, envp, prom_vec); #ifdef CONFIG_SGI_IP22 sgi_sysinit(); #endif #ifdef CONFIG_COBALT_MICRO_SERVER SetUpBootInfo(); #endif /* * Determine the mmu/cache attached to this machine, * then flush the tlb and caches. On the r4xx0 * variants this also sets CP0_WIRED to zero. */ loadmmu(); /* Disable coprocessors */ s = read_32bit_cp0_register(CP0_STATUS); s &= ~(ST0_CU1|ST0_CU2|ST0_CU3|ST0_KX|ST0_SX); s |= ST0_CU0; write_32bit_cp0_register(CP0_STATUS, s); /* * Main should never return here, but * just in case, we know what happens. */ for(;;) start_kernel(); } static void __init default_irq_setup(void) { panic("Unknown machtype in init_IRQ"); } void __init setup_arch(char **cmdline_p) { void baget_setup(void); void cobalt_setup(void); void decstation_setup(void); void deskstation_setup(void); void jazz_setup(void); void sni_rm200_pci_setup(void); void sgi_setup(void); void ddb_setup(void); void orion_setup(void); void ev96100_setup(void); /* Save defaults for configuration-dependent routines. */ irq_setup = default_irq_setup; #ifdef CONFIG_BLK_DEV_FD fd_ops = &no_fd_ops; #endif #ifdef CONFIG_BLK_DEV_IDE ide_ops = &no_ide_ops; #endif #ifdef CONFIG_PC_KEYB kbd_ops = &no_kbd_ops; #endif rtc_ops = &no_rtc_ops; switch(mips_machgroup) { #ifdef CONFIG_BAGET_MIPS case MACH_GROUP_BAGET: baget_setup(); break; #endif #ifdef CONFIG_COBALT_MICRO_SERVER case MACH_GROUP_COBALT: cobalt_setup(); break; #endif #ifdef CONFIG_DECSTATION case MACH_GROUP_DEC: decstation_setup(); break; #endif #ifdef CONFIG_MIPS_JAZZ case MACH_GROUP_JAZZ: jazz_setup(); break; #endif #ifdef CONFIG_SGI_IP22 /* As of now this is only IP22. */ case MACH_GROUP_SGI: sgi_setup(); break; #endif #ifdef CONFIG_SNI_RM200_PCI case MACH_GROUP_SNI_RM: sni_rm200_pci_setup(); break; #endif #ifdef CONFIG_DDB5074 case MACH_GROUP_NEC_DDB: ddb_setup(); break; #endif #ifdef CONFIG_DDB5476 case MACH_GROUP_NEC_DDB: ddb_setup(); break; #endif #ifdef CONFIG_ORION case MACH_GROUP_ORION: orion_setup(); break; #endif #ifdef CONFIG_MIPS_EV96100 case MACH_GROUP_GALILEO: ev96100_setup(); break; #endif default: panic("Unsupported architecture"); } strncpy (command_line, arcs_cmdline, CL_SIZE); memcpy(saved_command_line, command_line, CL_SIZE); saved_command_line[CL_SIZE-1] = '\0'; *cmdline_p = command_line; #if 0 #ifdef CONFIG_BLK_DEV_INITRD #error "Fixme, I'm broken." tmp = (((unsigned long)&_end + PAGE_SIZE-1) & PAGE_MASK) - 8; if (tmp < (unsigned long)&_end) tmp += PAGE_SIZE; initrd_header = (unsigned long *)tmp; if (initrd_header[0] == 0x494E5244) { initrd_start = (unsigned long)&initrd_header[2]; initrd_end = initrd_start + initrd_header[1]; initrd_below_start_ok = 1; if (initrd_end > memory_end) { printk("initrd extends beyond end of memory " "(0x%08lx > 0x%08lx)\ndisabling initrd\n", initrd_end,memory_end); initrd_start = 0; } else *memory_start_p = initrd_end; } #endif /* CONFIG_BLK_DEV_INITRD */ #endif /* 0 */ paging_init(); } void r3081_wait(void) { unsigned long cfg = read_32bit_cp0_register(CP0_CONF); write_32bit_cp0_register(CP0_CONF, cfg|CONF_HALT); } void r4k_wait(void) { __asm__(".set\tmips3\n\t" "wait\n\t" ".set\tmips0"); }