/* * linux/arch/mips/kernel/setup.c * * Copyright (C) 1995 Linus Torvalds * Copyright (C) 1995, 1996 Ralf Baechle * Copyright (C) 1996 Stoned Elipot * * $Id: setup.c,v 1.4 1997/12/01 17:57:31 ralf Exp $ */ #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #include #ifdef CONFIG_BLK_DEV_RAM #include #endif #ifdef CONFIG_RTC #include #include #endif #include #include #include #include #include #include #include #ifdef CONFIG_SGI #include #endif /* * How to handle the machine's features */ struct feature *feature; /* * What to do to keep the caches consistent with memory * We don't use the normal cacheflush routine to keep Tyne caches happier. */ void (*fd_cacheflush)(const void *addr, size_t size); /* * Not all of the MIPS CPUs have the "wait" instruction available. This * is set to true if it is available. The wait instruction stops the * pipeline and reduces the power consumption of the CPU very much. */ char wait_available; /* * Do we have a cyclecounter available? */ char cyclecounter_available; /* * There are several bus types available for MIPS machines. "RISC PC" * type machines have ISA, EISA, VLB or PCI available, DECstations * have Turbochannel or Q-Bus, SGI has GIO, there are lots of VME * boxes ... * This flag is set if a EISA slots are available. */ int EISA_bus = 0; /* * Milo passes some information to the kernel that looks like as if it * had been returned by a Intel PC BIOS. Milo doesn't fill the passed * drive_info and Linux can find out about this anyway, so I'm going to * remove this sometime. screen_info contains information about the * resolution of the text screen. For VGA graphics based machine this * information is being use to continue the screen output just below * the BIOS printed text and with the same text resolution. */ struct drive_info_struct drive_info = DEFAULT_DRIVE_INFO; struct screen_info screen_info = DEFAULT_SCREEN_INFO; /* * setup informations * * These are intialized so they are in the .data section */ unsigned long mips_memory_upper = KSEG0; /* this is set by kernel_entry() */ unsigned long mips_cputype = CPU_UNKNOWN; unsigned long mips_machtype = MACH_UNKNOWN; unsigned long mips_machgroup = MACH_GROUP_UNKNOWN; unsigned long mips_tlb_entries = 48; /* Guess which CPU I've got :) */ unsigned long mips_vram_base = KSEG0; unsigned char aux_device_present; extern int root_mountflags; extern int _end; extern char empty_zero_page[PAGE_SIZE]; /* * This is set up by the setup-routine at boot-time */ #define PARAM empty_zero_page #if 0 #define ORIG_ROOT_DEV (*(unsigned short *) (PARAM+0x1FC)) #define AUX_DEVICE_INFO (*(unsigned char *) (PARAM+0x1FF)) #endif #define LOADER_TYPE (*(unsigned char *) (PARAM+0x210)) #define KERNEL_START (*(unsigned long *) (PARAM+0x214)) #define INITRD_START (*(unsigned long *) (PARAM+0x218)) #define INITRD_SIZE (*(unsigned long *) (PARAM+0x21c)) static char command_line[CL_SIZE] = { 0, }; char saved_command_line[CL_SIZE]; /* * The board specific setup routine sets irq_setup to point to a board * specific setup routine. */ void (*irq_setup)(void); /* * mips_io_port_base is the begin of the address space to which x86 style * I/O ports are mapped. */ unsigned long mips_io_port_base; /* * isa_slot_offset is the address where E(ISA) busaddress 0 is is mapped * for the processor. */ unsigned long isa_slot_offset; __initfunc(static void default_irq_setup(void)) { panic("Unknown machtype in init_IRQ"); } __initfunc(static void default_fd_cacheflush(const void *addr, size_t size)) { } __initfunc(void setup_arch(char **cmdline_p, unsigned long * memory_start_p, unsigned long * memory_end_p)) { unsigned long memory_end; tag* atag; void decstation_setup(void); void deskstation_setup(void); void jazz_setup(void); void sni_rm200_pci_setup(void); void sgi_setup(void); /* Perhaps a lot of tags are not getting 'snarfed' - */ /* please help yourself */ atag = bi_TagFind(tag_machtype); memcpy(&mips_machtype, TAGVALPTR(atag), atag->size); atag = bi_TagFind(tag_machgroup); memcpy(&mips_machgroup, TAGVALPTR(atag), atag->size); atag = bi_TagFind(tag_vram_base); memcpy(&mips_vram_base, TAGVALPTR(atag), atag->size); irq_setup = default_irq_setup; fd_cacheflush = default_fd_cacheflush; switch(mips_machgroup) { #ifdef CONFIG_MIPS_DECSTATION case MACH_GROUP_DEC: decstation_setup(); break; #endif #if defined(CONFIG_MIPS_ARC) /* * Perhaps arch/mips/deskstation should be renamed to arch/mips/arc. * For now CONFIG_MIPS_ARC means DeskStation. -Stoned. */ case MACH_GROUP_ARC: deskstation_setup(); break; #endif #ifdef CONFIG_MIPS_JAZZ case MACH_GROUP_JAZZ: jazz_setup(); break; #endif #ifdef CONFIG_SGI case MACH_GROUP_SGI: sgi_setup(); break; #endif #ifdef CONFIG_SNI_RM200_PCI case MACH_GROUP_SNI_RM: sni_rm200_pci_setup(); break; #endif default: panic("Unsupported architecture"); } atag = bi_TagFind(tag_drive_info); memcpy(&drive_info, TAGVALPTR(atag), atag->size); memory_end = mips_memory_upper; /* * Due to prefetching and similar mechanism the CPU sometimes * generates addresses beyond the end of memory. We leave the size * of one cache line at the end of memory unused to make shure we * don't catch this type of bus errors. */ memory_end -= 128; memory_end &= PAGE_MASK; #ifdef CONFIG_BLK_DEV_RAM rd_image_start = RAMDISK_FLAGS & RAMDISK_IMAGE_START_MASK; rd_prompt = ((RAMDISK_FLAGS & RAMDISK_PROMPT_FLAG) != 0); rd_doload = ((RAMDISK_FLAGS & RAMDISK_LOAD_FLAG) != 0); #endif atag = bi_TagFind(tag_mount_root_rdonly); if (atag) root_mountflags |= MS_RDONLY; atag = bi_TagFind(tag_command_line); if (atag) memcpy(&command_line, TAGVALPTR(atag), atag->size); memcpy(saved_command_line, command_line, CL_SIZE); saved_command_line[CL_SIZE-1] = '\0'; *cmdline_p = command_line; *memory_start_p = (unsigned long) &_end; *memory_end_p = memory_end; #ifdef CONFIG_BLK_DEV_INITRD if (LOADER_TYPE) { initrd_start = INITRD_START; initrd_end = INITRD_START+INITRD_SIZE; if (initrd_end > memory_end) { printk("initrd extends beyond end of memory " "(0x%08lx > 0x%08lx)\ndisabling initrd\n", initrd_end,memory_end); initrd_start = 0; } } #endif }