# $Id: config.in,v 1.106 1999/09/14 19:21:18 cort Exp $
# For a description of the syntax of this configuration file,
# see the Configure script.
#
mainmenu_name "Linux/PowerPC Kernel Configuration"

mainmenu_option next_comment
comment 'Platform support'
define_bool CONFIG_PPC y
choice 'Processor type' \
	"6xx/7xx		CONFIG_6xx \
	 630/Power3(64-Bit) 	CONFIG_PPC64 \
	 82xx		 	CONFIG_82xx \
	 8xx			CONFIG_8xx" 6xx/7xx

if [ "$CONFIG_8xx" = "y" ]; then
  choice 'Processor Model' \
  	"821	CONFIG_MPC821 \
  	 823	CONFIG_MPC823 \
  	 850	CONFIG_MPC850 \
  	 855	CONFIG_MPC855 \
  	 860	CONFIG_MPC860 \
  	 860T	CONFIG_MPC860T" 860
  define_bool CONFIG_SERIAL_CONSOLE y
  choice 'Machine Type' \
	"RPX-Lite	CONFIG_RPXLITE \
	 RPX-Classic	CONFIG_RPXCLASSIC \
	 BSE-IP		CONFIG_BSEIP \
  	 MBX		CONFIG_MBX \
	 WinCept	CONFIG_WINCEPT" RPX-Lite
else
  choice 'Machine Type' \
	"PowerMac	CONFIG_PMAC \
	 PReP/MTX	CONFIG_PREP \
	 CHRP		CONFIG_CHRP \
	 PowerMac/PReP/CHRP	CONFIG_ALL_PPC \
	 Gemini		CONFIG_GEMINI \
  	 APUS           CONFIG_APUS" PowerMac
fi

bool 'Symmetric multi-processing support' CONFIG_SMP
if [ "$CONFIG_ALL_PPC" != "y" ];then
  define_bool CONFIG_MACH_SPECIFIC y
fi

if [ "$CONFIG_8xx" = "y" ]; then
  bool 'Math emulation' CONFIG_MATH_EMULATION
else
  if [ "$CONFIG_PPC64" != "y" ];then
    define_bool CONFIG_6xx y
  fi
fi
endmenu

mainmenu_option next_comment
comment 'General setup'

bool 'Prompt for development and/or incomplete code/drivers' CONFIG_EXPERIMENTAL
bool 'Enable loadable module support' CONFIG_MODULES
if [ "$CONFIG_MODULES" = "y" ]; then
  bool 'Set version information on all symbols for modules' CONFIG_MODVERSIONS
  bool 'Kernel module loader' CONFIG_KMOD
fi

if [ "$CONFIG_APUS" = "y" ]; then
  define_bool CONFIG_PCI n
else
  if [ "$CONFIG_8xx" = "y" ]; then
    bool 'QSpan PCI' CONFIG_PCI
  else
    define_bool CONFIG_PCI y
  fi
fi

bool 'Networking support' CONFIG_NET
bool 'Sysctl support' CONFIG_SYSCTL
bool 'System V IPC' CONFIG_SYSVIPC
bool 'BSD Process Accounting' CONFIG_BSD_PROCESS_ACCT

# only elf supported, a.out is not -- Cort
define_bool CONFIG_BINFMT_ELF y
define_bool CONFIG_KERNEL_ELF y
tristate 'Kernel support for MISC binaries' CONFIG_BINFMT_MISC

source drivers/pcmcia/Config.in

source drivers/parport/Config.in

if [ "$CONFIG_8xx" != "y" ]; then
  bool 'Support for VGA Console' CONFIG_VGA_CONSOLE
  bool 'Support for frame buffer devices' CONFIG_FB
  if [ "$CONFIG_FB" = "y" ]; then
    bool 'Backward compatibility mode for Xpmac' CONFIG_FB_COMPAT_XPMAC
  fi

  bool 'Power management support for PowerBooks' CONFIG_PMAC_PBOOK
  bool 'Support for PowerMac floppy' CONFIG_MAC_FLOPPY
  tristate 'Support for PowerMac serial ports' CONFIG_MAC_SERIAL
  if [ "$CONFIG_MAC_SERIAL" = "y" ]; then
     bool '   Support for console on serial port' CONFIG_SERIAL_CONSOLE
  fi
  bool 'Apple Desktop Bus (ADB) support' CONFIG_ADB
  if [ "$CONFIG_ADB" = "y" ]; then
     bool '   Include CUDA ADB driver' CONFIG_ADB_CUDA
     bool '   Include MacIO ADB driver' CONFIG_ADB_MACIO
     bool '   Include PMU (Powerbook) ADB driver' CONFIG_ADB_PMU
     bool 'Support for ADB keyboard' CONFIG_ADB_KEYBOARD 
  fi
  bool 'Support for Open Firmware device tree in /proc' CONFIG_PROC_DEVICETREE
  bool 'Support for TotalImpact TotalMP' CONFIG_TOTALMP
  bool 'Support for early boot text console (BootX only)' CONFIG_BOOTX_TEXT
  bool 'Support for Motorola Hot Swap' CONFIG_MOTOROLA_HOTSWAP
fi

if [ "$CONFIG_PREP" = "y" -o "$CONFIG_ALL_PPC" = "y" ]; then
  bool 'PReP bootloader kernel arguments' CONFIG_CMDLINE_BOOL y
  if [ "$CONFIG_CMDLINE_BOOL" = "y" ] ; then
    string 'Initial kernel command string' CONFIG_CMDLINE console=ttyS0,9600 console=tty0 root=/dev/sda2
  fi
fi

if [ "$CONFIG_APUS" = "y" ]; then
  define_bool CONFIG_FB_CONSOLE y
  define_bool CONFIG_AMIGA y
  define_bool CONFIG_ZORRO y
  define_bool CONFIG_AMIGAMOUSE y
  define_bool CONFIG_ABSTRACT_CONSOLE y
  define_bool CONFIG_FB y
  tristate 'Amiga builtin serial support' CONFIG_AMIGA_BUILTIN_SERIAL
  tristate 'Parallel printer support' CONFIG_M68K_PRINTER
  tristate 'GVP IO-Extender support' CONFIG_GVPIOEXT
  dep_tristate 'GVP IO-Extender parallel printer support' CONFIG_GVPIOEXT_LP $CONFIG_GVPIOEXT
  dep_tristate 'GVP IO-Extender PLIP support' CONFIG_GVPIOEXT_PLIP $CONFIG_GVPIOEXT
  tristate 'Multiface Card III serial support' CONFIG_MULTIFACE_III_TTY
  if [ "$CONFIG_AMIGA_BUILTIN_SERIAL" = "y" -o "$CONFIG_GVPIOEXT" = "y" -o \
       "$CONFIG_MULTIFACE_III_TTY" = "y" ]; then
    bool 'Support for serial port console' CONFIG_SERIAL_CONSOLE
  fi
  bool 'Use power LED as a heartbeat' CONFIG_HEARTBEAT
  bool '/proc/hardware support' CONFIG_PROC_HARDWARE
fi

endmenu

source drivers/pnp/Config.in
source drivers/block/Config.in
#source drivers.new/Config.in

if [ "$CONFIG_NET" = "y" ]; then
  source net/Config.in
fi

mainmenu_option next_comment
comment 'SCSI support'
tristate 'SCSI support' CONFIG_SCSI
if [ "$CONFIG_SCSI" != "n" ]; then
  source drivers/scsi/Config.in
fi
endmenu

if [ "$CONFIG_NET" = "y" ]; then
  mainmenu_option next_comment
  comment 'Network device support'

  bool 'Network device support' CONFIG_NETDEVICES
  if [ "$CONFIG_NETDEVICES" = "y" ]; then
    source drivers/net/Config.in
    if [ "$CONFIG_ATM" = "y" ]; then
      source drivers/atm/Config.in
    fi
  fi
  endmenu
fi

source net/ax25/Config.in

mainmenu_option next_comment
comment 'ISDN subsystem'

tristate 'ISDN support' CONFIG_ISDN
if [ "$CONFIG_ISDN" != "n" ]; then
  source drivers/isdn/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Old CD-ROM drivers (not SCSI, not IDE)'

bool 'Support non-SCSI/IDE/ATAPI CDROM drives' CONFIG_CD_NO_IDESCSI
if [ "$CONFIG_CD_NO_IDESCSI" != "n" ]; then
  source drivers/cdrom/Config.in
fi
endmenu

mainmenu_option next_comment
comment 'Console drivers'
source drivers/video/Config.in
endmenu

source drivers/char/Config.in
source drivers/usb/Config.in
source fs/Config.in

mainmenu_option next_comment
comment 'Sound'
tristate 'Sound card support' CONFIG_SOUND
if [ "$CONFIG_SOUND" != "n" ]; then
  dep_tristate 'Amiga or PowerMac DMA sound support' CONFIG_DMASOUND $CONFIG_SOUND
  source drivers/sound/Config.in
fi

endmenu

if [ "$CONFIG_8xx" = "y" ]; then
source arch/ppc/8xx_io/Config.in
fi

mainmenu_option next_comment
comment 'Kernel hacking'

bool 'Magic SysRq key' CONFIG_MAGIC_SYSRQ
bool 'Include kgdb kernel debugger' CONFIG_KGDB
bool 'Include xmon kernel debugger' CONFIG_XMON
endmenu